Dreamweaver MX 2004 on Leopard?

Sorry if this has been posted elsewhere but can anyone tell
me if they've installed MX 2004 on Leopard and if so, has it
worked?
If it's worked, has it worked fully or partly?
Any experiences would be very helpful.

Did anyone ever get an answer? I have MX2004 and simply want
to put in on a MacBook running, 10.4.11 (tiger, leopard, weasel?).
The MacBook is an intel pc vs. powerpc setup. I tried to load and
it wouldn't. I also have PHOTOSHOP 7. I don't have any need or
desire to spend $1000 on these programs just to run on a new
computer if it isn't necessary because I don't use that often. Just
to update info, etc and occasionally fix an image. So....can MX2004
and PhotoShop 7 run on an intel pc Mac?

Similar Messages

Dreamweaver MX 2004 and Leopard

I have installed MX 2004 but it wont work with Leopard
10.5.5. Does anyone know why or is there a solution ?

I have the same problem...I tried reinstalling MX2004, but
that had no effect. Hopefully someone will respond!

Dreamweaver MX 2004 in 10.5 - not qualified but working?

I own Dreamweaver MX 2004 and though I know it will never be supported, I want to know if it is functioning for people in 10.5 or 10.5.1??
I haven't been able to use it on the Leopard partition I'm testing yet, because it comes up wanting me to re-authorize the license when I launch it. And I don't want to do that just yet for fear that I could be using too many of my authorizations. I will be wiping this drive and completely reinstalling Leopard when the time comes. And it would be a shame to never again be able to authorize Dreamweaver MX 2004.
BTW, anyone know how many times we are able to authorize it over the internet in the lifetime of owning the software before we can never re-authorize it again?
I wipe my drives very often and reinstall for stability reasons and would hate to know that someday I could suddenly lose my ability to re-authorize a program I paid for.
thanks

Hi David:
Wondering if you have tried installing and running this. I use Studio MX 2004 including Dreamweaver periodically, but have been running it off my backed up Tiger. As far as authorising it. If you de-authorise before wiping the drive should be okay to re-input the key after re-installing. If you have any problems with the key you can call up Adobe and they are pretty good at helping you get re-activated.
JS

Dreamweaver MX 2004 incompatibility with Intel/OS 10.6?

Hello All,
I hope this is the correct forum for my question/problem, which is that when I try to launch Dreamweaver MX 2004 or Fireworks MS 2004 on my brand-new MacBook Pro running 10.6.4, they begin to launch, jumping up and down in the dock several times, then simply quit--no error message or indication of why. I am posting the crash report below. Can anyone shed any light on my problem? Thanks.
Lou
------------------Begin Crash Report----------------
Process: Dreamweaver [3832]
Path: /usr/libexec/oah/translate
Identifier: Dreamweaver
Version: ??? (???)
Code Type: PPC (Translated)
Parent Process: Dreamweaver [3827]
Date/Time: 2010-07-30 02:20:04.558 -0400
OS Version: Mac OS X 10.6.3 (10D2101a)
Report Version: 6
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0 LaunchCFMApp 0xb815ac07 spinlockwrapper + 89967
1 LaunchCFMApp 0xb8179fb4 CallPPCFunctionAtAddressInt + 98620
2 LaunchCFMApp 0xb80c6b13 0xb8000000 + 813843
3 LaunchCFMApp 0xb80c0037 0xb8000000 + 786487
4 LaunchCFMApp 0xb80dd8e8 0xb8000000 + 907496
5 LaunchCFMApp 0xb8145397 spinlockwrapper + 1791
6 LaunchCFMApp 0xb801ceb7 0xb8000000 + 118455
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0xb8179f16 ecx: 0x00000000 edx: 0x00000001
edi: 0x00000ef8 esi: 0x00000006 ebp: 0xb7fff978 esp: 0xb7fff954
ss: 0x0000001f efl: 0x00000246 eip: 0xb815ac07 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
cr2: 0xb8179f08
Binary Images:
0x80000000 - 0x8005bff7 com.apple.framework.IOKit 2.0 (???) <76E6AC9F-7899-9C75-B477-C75BCEE4AF57> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x8007a000 - 0x800e4fe7 libstdc++.6.dylib 7.9.0 (compatibility 7.0.0) <411D87F4-B7E1-44EB-F201-F8B4F9227213> /usr/lib/libstdc++.6.dylib
0x8013f000 - 0x802e4feb libSystem.B.dylib 125.0.1 (compatibility 1.0.0) <46E95580-DB88-A8B1-6092-3A4F724EC2F2> /usr/lib/libSystem.B.dylib
0x80364000 - 0x804ddffb com.apple.CoreFoundation 6.6.1 (550.19) <9CA9F114-5DD6-26AA-F909-E9E87B764F93> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x805d5000 - 0x805e3fe7 libz.1.dylib 1.2.3 (compatibility 1.0.0) <2020E84A-F5A1-9D49-B0CA-7C68A8085BAA> /usr/lib/libz.1.dylib
0x805e8000 - 0x805f4ff7 libkxld.dylib ??? (???) <BA58688C-9115-756C-5895-00D4522365A6> /usr/lib/system/libkxld.dylib
0x805f8000 - 0x8063eff7 libauto.dylib ??? (???) <0898A4A1-28BC-5337-EE17-D55C74F975F4> /usr/lib/libauto.dylib
0x8064b000 - 0x807cdfe7 libicucore.A.dylib 40.0.0 (compatibility 1.0.0) <790F5013-01FD-2CA8-7815-8DB9D009B937> /usr/lib/libicucore.A.dylib
0x8082f000 - 0x808dcfe7 libobjc.A.dylib 227.0.0 (compatibility 1.0.0) <22CD62D4-9E7D-C31A-F585-FCEF1FE4C39A> /usr/lib/libobjc.A.dylib
0x808f0000 - 0x808f3fe7 libmathCommon.A.dylib 315.0.0 (compatibility 1.0.0) <1622A54F-1A98-2CBE-B6A4-2122981A500E> /usr/lib/system/libmathCommon.A.dylib
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <932443AA-5E20-8A62-8D14-B9447CBC87FB> /usr/lib/dyld
0xb8000000 - 0xb81defff LaunchCFMApp ??? (???) <C6CB6BA8-8BA2-8F0A-4A49-912B00D2FF10> /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp
0xffff0000 - 0xffff1fff libSystem.B.dylib ??? (???) <46E95580-DB88-A8B1-6092-3A4F724EC2F2> /usr/lib/libSystem.B.dylib
Translated Code Information:
objc[3827]: garbage collection is ON
NO CRASH REPORT

It's simply that MX 2004 is not designed for use with Snow Leopard (or Leopard for that matter). It hasn't been tested by Adobe (I believe Dreamweaver was still a Macromedia product when that version was released), and it's unlikely that a bug fix is coming out to resolve the issues. It's also not a Universal app, which means it is using Rosetta to run on your Intel based Mac.
I know it ***** to have to drop $200 on an upgrade, but depending on how much you use Dreamweaver, the increase in performance might be worth it.

Dreamweaver MX 2004 - "An Unidentifed Error has occorred." - Please help!!

Hi folks. I have scoured the internet for a fix to this problem. Most of the posts I read are unanswered or the solution does not work. I am hoping a guru reads mine and has the magic answer - I am ready to chuck the project altogether if I can't find a solution. Although I am not a newbie to simple page design, I have never really tackled data access (dynamic content) before, like I am about to. I am ready and willing to learn but this obstacle may hinder my interest if it is going to be this big a pain in the keester.
Let's start with my system config:
Windows XP Pro w/ SP3
Dreamweaver MX 2004
IIS 5.1 - configured with FTP support
PHP 5.2.11
MySQL 5.0 - For now I am using the Test DB that comes with MySQL. Using "root" account.
I have verified that all is running properly to the best of my knowledge. Certainly Dreamweaver up until this issue has worked for years. I have not used DW for data access before on this machine but have successfully on others.
IIS > Loads web content from http://localhost just fine. Including PHP test page. And IIS help stuff that comes pre-installed.
MySQL > I can build DB's and Schemas just fine. I can even import data from external sources so I have to assume it's running fine.
Dreamweaver > The site I am building has the following config:
Local Info
Site Name: medimj
Local Root: C:\medimj *set to refresh
Images: C:\medimj\images
HTTP: blank
Remote Info
Access: Local/Network
Remote Folder: C:\inetpub\wwwroot\medimj\ *set to refresh auto
Testing Server
Server Model: PHP MySQL
This site contains: Dreamweaver MX Pages Only (default)
Access: Local/Network
Testing Server Folder: C:\indetpub\wwwroot\medimj\ *set to refresh auto
URL Prefix: http://localhost/medimj
<<<Everything else I believe is irrelevant to the topic and left to defaults>>>
SO HERE IS WHAT IS HAPPENING:
When I go to make a data connection (Step 4 under the Database tab of Applications section in DW), I click the "+" button and select "MySQL Connection". The dialogue window appears and I input:
Connection Name: medimj
MySql Server: localhost
User Name: root
Password: <password>
I click "Select" button and get an error window that says "An Unidentified error has occurred." and I am taken back to the MySQL Connection dialogue box. I have tried adding http:, slashes, \medimj, IP address, and pipe name to the Server name to make the connection and none of it works. If I put a DB name and click "ok" the binding will appear but no table ever come into view. If I click on "Test" I get the same error.
Here is the mysql area of the test.php. From what I see, I should be able to make a connection; but I'm not expert. Should I be seeing more information?:
mysql
MySQL Support
enabled
Active Persistent Links
0
Active Links
0
Client API version
5.0.51a
Directive
Local Value
Master Value
mysql.allow_persistent
On
On
mysql.connect_timeout
60
60
mysql.default_host
localhost
localhost
mysql.default_password
no value
no value
mysql.default_port
3306
3306
mysql.default_socket
no value
no value
mysql.default_user
no value
no value
mysql.max_links
Unlimited
Unlimited
mysql.max_persistent
Unlimited
Unlimited
mysql.trace_mode
Off
Off
I just don't see what's wrong at this point. I really hope somebody here can help.
I've been at this for 4 days and uninstalled and reinstalled everything to no avail. I hope I have given enough information for someone to make a suggestion that will help. I thank anyone for their time in advance.
prdreamweaver

I would like to share with everyone a fix for this problem. I wish I could say I found it here but I did not. After continuing to search the Internet, while eagerly awaiting an answer here, I stumbled upon the answer deep in a thread in the MySQL website forums.
If someone should find this topic before the supposed Adobe fix, please do not waste your time with what Adobe suggests. It has been know cause more problems than help - as was the case with me. Applying their "fix" forced me to reinstall MySQL and a fresh version of PHP. I am also providing OS information and versions of all components I am using as well as settings within Dreamweaver. I cannot speak as to whether this fix transitions across other versions of Dreamweaver but it's worth looking at if yours does not match mine.
NOTE: ALWAYS MAKE A RECORD OF WHAT YOU CHANGE. THIS IS BASIC TROUBLESHOOTING AND WILL MINIMIZE THE NEED TO REINSTALL IF THINGS GET WORSE. BEING ABLE TO REVERSE WHAT YOU'VE CHANGED IS IMPORTANT.
System Info
OS: Windows XP Pro w/ SP3 (patched to the hilt)
IIS: 5.1 (installed from XP Pro CD - additional windows components)
PHP: v5.2.11 (installer version)
MySQL: v5.0.87 (installer version)
Dreamweaver: MX 2004
Install IIS, PHP, and MySQL per their individual instructions.
IIS Tweaks
Note: This tweak assumes you haven't already created your website virtual directory under IIS. If you have, you can delete it and follow these steps. You don't have to but I like this recommendation I found on another site as it tricks DW into thinking its attaching to an "outside" server. You'll see what I mean when you see the DW confg options later in this topic.
1. Create a folder under c:\inetpub\wwwroot that matches the local folder in DW for the site you are designing. Make sure they are spelled the same. If you have pages and images already in your local folder for DW, you don't have to re-create them here. You can sync them to the "server" much like you would when you FTP your pages up to a live server. Just make sure the root folders are named the same.
2. Right click your localhost site select "properties". Click the "Home Directory" tab. Click on the "Configuration" button. Under "Application Mappings", click the "Add" button. A new dialogue box appears > In the "Executable" area, browse to the root PHP folder and select file "php5isapi.dll" and click ok to return to the dialogue box. In the "Extension" box type ".php" without the quotes. Make sure "Script Engine" and "Check that file exists" are checked. Click ok.
NOTE: A DIALOGUE BOX MAY APPEAR ASKING IF YOU WANT TO PROPOGATE THE CHANGES ACROSS ALL OTHER SITES. YOU CAN SAY YES BUT IT DOESN'T ALWAYS WORK. (IT'S AN IIS THING) TO SEE IF IT DID, CHECK THE PROPERTIES OF YOUR VIRTUAL DIRECTORY AND FOLLOW STEP TWO IF YOU DON'T SEE THE PHP MAPPING THERE.
PHP Tweaks
1. extension_dir = c:\php\ext ~ change folder to match your install
2. cgi.force_redirect = 0 ~ required for IIS
3. register_globals = On
4. register_long_arrays = On
5. extension=php_mysql.dll ~ removed the ;
6. extension=php_mysqli.dll ~ removed the ;
7. include_path = "."
8. mysql.default_host = localhost
9. mysql.default_port = 3306
**NOTE: IF I DIDN'T PUT QUOTES - NEITHER SHOULD YOU.
10. Save and Close
copy the file libmysql.dll
to c:\windows & c:\windows\system32 ~ this file is in the root of PHP 5 folder
XP Environment Variables: Add the following at the end of Paths> c:\<php folder>;c:\<php folder>\ext ~ change php folder for your install
NOTE: ANY CHANGES TO ENVIRONMENT VARIABLES HAS THE POTENTIAL TO CAUSE SYSTEM PROBLEMS IF NOT DONE CORRECTLY. MAKE SURE YOU HAVE A ";" AT THE END OF THE PATH BEFORE YOU ADD THE CHANGES.
REBOOT!!!! THESE CHANGES WILL NOT TAKE EFFECT UNTIL YOU DO SO.
DW - edit current site or create it new
Local Info:
Should be left however you have it now OR if creating new, just do it like you always have.
Remote Info:
Access : Local/Network
Remote Folder: C:\inetpub\wwwroot\<your virtual directory>
* Check Refresh Automatically
Testing Server:
Server Model: PHP MySQL
Access: Local/ Network
Testing Server Folder: C:\inetpub\wwwroot\<your virtual directory>
URL Prefix: http://localhost/<your site name>
* Check Refresh Automatically
** I don't make changes to anything else under site editing so I stop there. Click OK and you're done.
At this point, you should see under the "Application" section on the "Database" tab, steps 1,2,3 checked. Now create a connection by clicking the "+" button. Enter the following:
Connection Name: <whatever you want>
MySQL Server: localhost
User Name: root (or another account you have created with sufficient privileges)
Password:
Database: enter a DB name you wish to connect to or click select if you wish to browse for it.
You shouldn't get the "Unidentified Error..." message anymore. I know I don't.
I hope this helps the next poor sap this happens to. I'm sorry for the long post but I hate, hate, hate, when people post half assed instructions because they are too lazy to type.
Good luck everyone and happy designing!!!
prdreamweaver
email: [email protected]
(you can email me with questions but remember, I am not an expert with dynamic content. however, I am willing to assist if I can)

Find and replace Dreamweaver mx 2004 problem: not opening saved queries

Dreamweaver mx 2004 is not opening saved queries! I use find and replace often and uses to save code replacements to reuse
it. But now when I open the saved query I have 2 situations:
1) comes completely blank
2) or only shows truncated text or code in fields.
I opened the dwr file in text editor and seems to be fine, I mean information saved is there.
Tried recreating cache, or deleting caché, tried saving new or overwritting existant ones, tried saving into a completely different location,
tried in other site definition. Nothing seems to work...

Which FTP app did your predecessor use to upload files? If it's still on your work station, it should contain the log-in credentials.
You'll find a few utilities online for revealing passwords
http://www.rixler.com/?gclid=CJeUxd775LkCFWZk7AodyiAAaQ
Nancy O.

Installed Dreamweaver MX 2004 update for Windows and now Dreamweaver won't open. Help?

I was having some glitches uploading to a host I ftp to often so I decided to check for a Dreamweaver update for MX 2004. When I found the Windows update and tried to install - it told me to uninstall Extensions. I uninstalled extensions and continued with the installation of the update. Now Dreamwever will not open at all - it says Dreamweaver MX 2004 has stopped working. I can see the update is installed since the version is 7.0.1. Any ideas on how to undo the update? I have no idea where this program disk is right now for reinstallation plus all my servers are already setup....

You might try Windows System Restore to a point before you installed the update.
Good luck.
Nancy O.

Cannot activate Dreamweaver MX 2004 on Windows 7 64 bit pc?

Hello.
Does anybody in here know how to activate Dreamweaver MX 2004 on a Windows 7 64 bit pc?
I keep getting the message that there is an internet connection problem.
I have deactivated my firewall etc., but it doesn't help me.
Anybody got an idea? Adobe Chat does not have the answer for me!
Regards Anders Fj

Wow! Thank you. It Works! Clever!
This is really helpful for those
of us who are nore professionals. I only use Dreamweaver MX 2004 to
maintain and repair my own small homepage with photos. And I know how to
use Dreamweaver MX 2004 and I am not interested in learning new tools -
not now
ONE MORE QUESTION THOUGH: Where and how do I update my
Dreamweaver MX 2004 now that I have installed Dreamweaver MX 2004 on my
new Win 7 64 bit pc?
Regards
Anders Fjeldberg, Denmark
Ken Binney
skrev den 2014-05-04 00:01:
CANNOT ACTIVATE DREAMWEAVER MX 2004 ON
WINDOWS 7 64 BIT PC?
created by Ken Binney in _Dreamweaver
support forum_ - View the full discussion
>

Creating a Photo Album In Dreamweaver MX 2004

I followed the steps to create a web photo album using
Dreamweaver MX 2004 and Fireworks and it creates it. However, I
can't get it to display on the web when I upload it. It displays
the message "Page can not be found". Please help!

I think the fact that you have spaces in your files/folder
names is bound to
have created problems. I suggest you do some renaming and
re-upload.
BTW it is incredibly difficult to access pages on the site.
If Alan hadn't
put the link in I would have given up.
Jo
"Alan" <[email protected]> wrote in
message
news:C0D03CEE.295268%[email protected]..
>
>
>> Ithe link is on my Events page. you can get to it by
entering the site
>> and
>> clicking the events link.
>
>
http://www.arelevantministry.com/photo%20album/index.htm
>
> have you selected and PUT all the files?
>
> find "photo%20album" folder, select and Put it.
> do all the files transfer?
>
>
>

Help building an e-commerce site using DreamWeaver MX 2004 and Oracle 10G

I'm new to using Oracle 10G. After reviewing several rdms's I've picked Oracle 10G as my rdms. I'm trying to build an ecommerce site using DreamWeaver MX 2004 and Oracle 10G. The website will be selling hardware and software products. I have a choice in DreamWeaver to go for a .asp or .jsp setup. I have several questions, here goes:
1. Is there any book/tutorial/whitepaper out there that describes building an ecommerce site using Oracle 10G/9I/8I? Just some examples as how to make the datamodel regarding the shopping basket etc.
2. I prefer DreamWeaver as it let's me make nice looking css style based pages without throttling too much through the code. Are there Oracle tools which allow me to make an advanced nice looking ecommerce site?
I hope some of you can help me get started. Any effort is appreciated.
Cheers

I'm new to using Oracle 10G. After reviewing several rdms's I've picked Oracle 10G as my rdms. I'm trying to build an ecommerce site using DreamWeaver MX 2004 and Oracle 10G. The website will be selling hardware and software products. I have a choice in DreamWeaver to go for a .asp or .jsp setup. I have several questions, here goes:
1. Is there any book/tutorial/whitepaper out there that describes building an ecommerce site using Oracle 10G/9I/8I? Just some examples as how to make the datamodel regarding the shopping basket etc.
2. I prefer DreamWeaver as it let's me make nice looking css style based pages without throttling too much through the code. Are there Oracle tools which allow me to make an advanced nice looking ecommerce site?
I hope some of you can help me get started. Any effort is appreciated.
Cheers

Dreamweaver MX 2004 hangs at start on new Mac Mini OS X 10.5.5

Dreamweaver MX 2004 hangs at start on Brand New Mac Mini OS X
10.5.5.
Mac Mini is brand new, right out of the box. Fresh OS.
I try to start Dreamweaver, and it hangs, and then the
Problem Report comes up with the attached info. I've uninstalled,
downloaded Dreamweaver and re-installed. Nothing works.
----------------------- Here is the Problem report
----------------------

Thanks for the reply.
I downloaded and installed the update.
I still get the exact same problem, and error report.
I have the exact same problem with Fireworks MX 2004 as well.
After a fresh download and install of the software, clicking on the
application icon just causes it to bounce momentarily in the dock,
and then it crashes and the error log comes up.
I have been able to install Flash CS4 without incident,
though. It works fine, with no problems.
I shouldn't have to do this on a brand new mini right out of
the box, but I'm going to run a restore on it, and then try a fresh
install once again.

Dreamweaver MX 2004 won't launch. Please help!

My old laptop running Dreamweaver MX 2004 is dying, so I installed it on my new Windows XP laptop. I have installed it several times before and never had a problem. On the new laptop, when I launch Dreamweaver, it does not start. In Task Manager, I see a Dreamweaver process start, then two ~e5d141.tmp processes start, then they all disappear. One Macromedia Licensing.exe process remains for a few seconds or a minute, then it disappears too. Technical support said my license and registration are all okay. I installed the 7.0.1 upgrade but that had no effect. There is nothing the event logs. I tried uninstalling and reinstalling in safe mode, launching it in safe mode, disabling the graphic accelerator, and lowering my screen resolution to 1280x1024. I also tried several "Compatibility mode" settings. I cannot find any log or dump files, although I might not be looking in the right places or for the right file names. Can anybody please help me?
Thank you.

Good morning ArtieTet,
I had the exact same problem and came across your post. I've since solved it on my computer. I'm not sure what your level of computer expertise is and whether or not you're comfortable editing your registry, so I've dumbed-down the following instructions a bit - forgive me if they're too dumbed-down!
1. Click Start
2. Click Run
3. Type regedit
4. Click the OK button
5. Double click the HKEY_CURRENT_USER key (folder) on the left
6. Double click the SOFTWARE key
7. Double click the MACROMEDIA key
8. Right click the DREAMWEAVER MX 2004 key
9. Click Rename
10. Type a new name for the key, such as OLD DREAMWEAVER MX 2004
11. Press Enter
12. Try to start Dreamweaver again
If all goes well, Dreamweaver should open and re-create that DREAMWEAVER MX 2004 registry key from scratch. There's likely some corrupt data in it, though I haven't been able to figure out what. If I do, I'll let you know.

How do I highlight text in Macromedia Dreamweaver MX 2004

HI to all Forum Participants:
HI to anyone:
I posted a question on how do I highlight text in Dreamweaver MX 2004, to both the Dreamweaver Development Toolbox General Discussion Forum and the Dreamweaver Extension Forum on Tuesday, 6/16/2009 or Wednesday, 6/17/2009, saying this:
HI Anyone:
I have looked under Help and Tutorials in Dreamweaver MX 2004, and I am having a heck of a time finding out how to highlight text in Dreamweaver MX 2004.
Do any of you know how to do this actually in Dreamweaver MX 2004? Say I wanted to highlight this text, all in Yellow:
This is sample highlighted text.
How would I do it?
Thank you,
Jon Lutz
Promoter Power LLC
Email: [email protected]
And I got this response from pziecana, in the Dreamweaver Development Toolbox General Discussion:
Re: How do I highlight text in Dreamweaver MX 2004
The simplest way is to use a span and set a background-color for the text you wish to highlight.
e.g.
<span class="graybg">This is some text</span>
css for above -
.graybg{
backgroung- color: #666666;
This would give you a gray background.
HTH
PZ
I tried both, and neither worked. Any other ideas on how to do this? I cannot believe it is so hard to do this in Dreamweaver MX 2004, highlighting text. I'm even enclosing an attachment showing how I did this in the <span class="graybg">This is some text</span> above.
Thank you,
Jon Lutz
Promoter Power LLC

Hi,
Looking at your screen shot, you didn't add the css.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<style type="text/css">
.greybg {
background-color:#999999;
</style>
</head>
<body>
<span class="greybg">This is my text</span>
</body>
</html>

In dreamweaver mx 2004 and dreamweaver cs4, how I configure, when download/upload do not ask me to include DEPENDED FILES but act without including ?

in dreamweaver mx 2004 and dreamweaver cs4, how I configure, when download/upload do not ask me to include DEPENDED FILES but act without including ?

Open the Preferences panel (Edit menu on Windows, Dreamweaver menu on a Mac), and select the Site category. There are two checkboxes there for dependent files. Make sure both are selected. The Dreamweaver default is NOT to upload/download dependent files. You need to click Yes, if you want the dependent files to be included.

Importing graphics in Dreamweaver MX 2004

On some computers I am finding Dreamweaver MX 2004 imports
images as imagesfilename into the root folder - and not as the
original filename into the default images folder. Is there a
setting that I should be aware of?

I am teacing in Further and Higher Education so sometimes get
classes of 20 plus students. We have been usoing DW MX 2004 for 4
years (CS3 in September!). I have never seen this happen before bur
my colleague says that he has occasionally. Students work from a
network drive in most cases. They would normally create their
sites's root folder on their network area, create an images folder
in this, copy any images required in the site into the images
folder, define a DW site pointing to the 'root folder' and set up
the images folder as the default images folder.
When they need to add further images during developement,
they would either copy those images into the images folder (using
their file mangement program) or use Insert (menu bar)/Images etc.
and navigate to the image(s) they require (outside the site
folder). For two students last Tuesday when they did the latter the
files were 'renamed' and put in the site's 'root' or top folder.
(The files being brought into the site were originally sited in the
same general area as the site's root folder). I have tried to
reproduce this (unsuccessfuly) on a couple of other computers -
albeit briefly - and also looked at the settings on the student's
computers. I have not yet checked whether this action moves round
with the student's network profile.
I don't normally get students to bring image files into their
sites in this way during developemnt - but it should work -
shouldn't it? That is the point of having a default images folder.
We are using Windows XP OS and Novell Network Client.
I really can't work this one out - so would appreciate any
comments. Thanks.

Dreamweaver MX 2004 on Leopard?

Similar Messages

Maybe you are looking for