Dreamweaver MX 2004 Template
I'm trying tou put some PHP outside of the HTML tag in a
Dreamweaver MX 2004 Template I have made.
I keep getting errors when I try to update my pages with this
code.
Can anyone give me any tips / solutions on how to do
this?
What errors are you getting?
What PHP are you trying to place outside of the <html>
tags?
Can you show us a template page that would throw these
errors?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Foochuck" <[email protected]> wrote in
message
news:g8cu5f$67s$[email protected]..
> I'm trying tou put some PHP outside of the HTML tag in a
Dreamweaver MX
> 2004
> Template I have made.
>
> I keep getting errors when I try to update my pages with
this code.
>
> Can anyone give me any tips / solutions on how to do
this?
>
Similar Messages
-
Dreamweaver MX 2004 Update?
I've tried to update my Dreamweaver MX 2004 - but everytime I
start going through the install it says that Dreamweaver is not
found within the Macromedia/Dreamweaver folder and therefore can't
install. I've verified that the application is in that folder. Is
anyone else having this problem? I was told by our IT department
that he tried installing a fresh copy of Dreamweaver on his new
computer and then installing the udpate and he came across the same
problem.
Any news/ideas about this?This means that your DMX2004 is already at the most current
release level.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"swim4it" <[email protected]> wrote in
message
news:e5mviq$fc6$[email protected]..
> I've tried to update my Dreamweaver MX 2004 - but
everytime I start going
> through the install it says that Dreamweaver is not
found within the
> Macromedia/Dreamweaver folder and therefore can't
install. I've verified
> that
> the application is in that folder. Is anyone else having
this problem? I
> was
> told by our IT department that he tried installing a
fresh copy of
> Dreamweaver
> on his new computer and then installing the udpate and
he came across the
> same
> problem.
>
> Any news/ideas about this?
> -
Dreamweaver MX 2004 with Contribute CS3
Good Afternoon,
I have Adobe CS3 Web Premium edition, but a colleague located
interstate is using DreamWeaver MX 2004. I would like him to design
a dreamweaver template for use in Contribute CS3. Are there any
known compatibility issues with doing this, or any DreamWeaver CS3
features that we would maybe miss out on?
Thanks in advance!I don't think this would be a problem, since you can
administer the site from within Contribute. The template souirce
code hasn't changed, so Contribute will find the templates and the
editable regions.
You could always decide to turn of the compatiblity in
dreamweaver if there are problems with the cheking in and out
system. -
Dreamweaver MX 2004 compatibility with latest versions?
Dreamweaver MX 2004 compatibility with latest versions?
I have templates in a old Dreamweaver MX 2004 and want to update my software. Will I need to go in steps to a version a few years back and then to current? Or can I go all the way to current?
I also can't get my old dreamweaver to register anymore and they have NO support for it. Any clues? It is legit an I have the registration numbers and all the same but it won't take it for some reason.
thank you all for any support you can give.HTML is HTML. The product you use doesn't matter much except in terms of "ease of use" and quality of code it generates. MX is a dinosaur. Depending on how you built your sites with it, you may need to update your code to modern web standards. But your site's code will remain editable in any version of DW.
That said, a LOT has changed in 10 years. So if you don't have really strong coding skills in HTML and CSS, you will struggle with newer versions of DW. The interface is different, too, so it will take some adjustment.
CS6 is the only version you can still purchase.
Creative Suite 6
All the rest are available only through subscription to the Creative Cloud.
Creative Cloud pricing and membership plans | Adobe Creative Cloud
Nancy O. -
As you will see from this question, I am a newbie at website
construction.
I am working on developing a new site using Dreamweaver MX
2004. I have included a navigation bar, which seems to work OK
except for the "Down" mode. "Up", "over" and "Over when down" seem
to work OK, and links to new pages work too.
I expected that when I click on a button, it would turn to
the "Down" graphic, and then when the new page opens, it would also
show the "Down" graphic.
That doesn't happen. Clicking on a button, shows the "Down"
graphic fleetingly, and in the new page which opens the "Up" button
shows. This seems independent of the browser - IE, Firefox etc.
Suggestions as to what is going on, and how to fix it would
be gratefully received. Thanks
MichaelThe DW "Nav Bar" feature is a long-in-the-tooth antique,
originally written
to support frames. It is only with frames where you will get
the "down"
state of the buttons working properly. In all other cases,
the Nav Bar is
an extreme example of bloated functionality that could
otherwise be achieved
using simple image swaps on a series of button images, which
is what I
recommend you do. Get rid of the old, and go with the 'new'.
Now - is your page a template controlled page?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Captum" <[email protected]> wrote in
message
news:fpe7vq$si8$[email protected]..
> As you will see from this question, I am a newbie at
website construction.
> I am working on developing a new site using Dreamweaver
MX 2004. I have
> included a navigation bar, which seems to work OK except
for the "Down"
> mode.
> "Up", "over" and "Over when down" seem to work OK, and
links to new pages
> work
> too.
>
> I expected that when I click on a button, it would turn
to the "Down"
> graphic,
> and then when the new page opens, it would also show the
"Down" graphic.
>
> That doesn't happen. Clicking on a button, shows the
"Down" graphic
> fleetingly, and in the new page which opens the "Up"
button shows. This
> seems
> independent of the browser - IE, Firefox etc.
>
> Suggestions as to what is going on, and how to fix it
would be gratefully
> received. Thanks
>
> Michael
>
>
> -
Dreamweaver mx 2004 in a php file I insert in head the
I use dreamweaver mx 2004, well in a php file I insert in
<head> the:
<base href="
http://www.Polis-Land.com/dialup"
/>
but only images[status bar-browser show this] that link to
external popup windows, all other links show eg.:
<a href="/villas/thalassa.php">THALASSA VILLAS -
LATCHI</a>
show
http://www.polis-land.com/villas/thalassa.php
rather than
http://www.polis-land.com/dialup/villas/thalassa.php
the disired , well ?
You can find php file at
http://www.polis-land.com/dialup/villas/villas.php
I have changed only one link I try
<a href="villas/thalassa.php">THALASSA VILLAS -
LATCHI</a>
but same thing...
Please note that images show:
http://www.polis-land.com/dialup#
well ???All links in a template file must be correct based on the
location of the
Template file. DW will manage them for you when you spawn
child pages.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Alan" <[email protected]> wrote in
message
news:C39E9C5B.2E6A11%[email protected]..
>
>
>> You mean make it :
>> <a href="index.php">HOME</a>
>
> No. In the template file that's in the Template folder,
it would be:
> <a href="../index.php">HOME</a>
>
>> Can I use this template for the dsl mode (no base
url) ?
>
> Yes- if by that you mean them to be document relevant
links that actually
> go
> where they point.
>
> --
> Alan
> Adobe Community Expert, dreamweaver
>
>
http://www.adobe.com/communities/experts/
>
>
> -
Dreamweaver MX 2004 and Dreamweaver 8
Are Dreamweaver MX 2004 and Dreamweaver 8 one of the same, or
are they 2 different products?DW8 is a later release than DMX2004 (DW7).
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Kemery" <[email protected]> wrote in
message
news:e9o3av$99h$[email protected]..
> Are Dreamweaver MX 2004 and Dreamweaver 8 one of the
same, or are they 2
> different products? -
Dreamweaver MX 2004 update file is corrupt
Dreamweaver MX 2004 update 7.0.1 is corrupt on your site (English version). How do I find a working file to download?
This means that your DMX2004 is already at the most current
release level.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"swim4it" <[email protected]> wrote in
message
news:e5mviq$fc6$[email protected]..
> I've tried to update my Dreamweaver MX 2004 - but
everytime I start going
> through the install it says that Dreamweaver is not
found within the
> Macromedia/Dreamweaver folder and therefore can't
install. I've verified
> that
> the application is in that folder. Is anyone else having
this problem? I
> was
> told by our IT department that he tried installing a
fresh copy of
> Dreamweaver
> on his new computer and then installing the udpate and
he came across the
> same
> problem.
>
> Any news/ideas about this?
> -
Dreamweaver MX 2004 and Windows Vista
Does anyone know if Dreamweaver MX 2004 will install and run
on the new Windows Vista?Looks like the only thing I can't do is establish a
connection to a db. I
get a 405 error with both DWX 2004 and DW8 trial.
If I manually setup the string in code it will work, but then
you can't use
server behaviors.
Just an FYI
"Rob" <[email protected]> wrote in message
news:[email protected]...
> That's strange, windows mail made that turn out wacked.
>
> "Rob" <[email protected]> wrote in message
> news:[email protected]...
>> debushman,
>>
>> I have been running Sudio MX 2004 on Windows Vista
Ultimate with no
>> issues yet.
>> I have used DW more than the others and mainly in
code view, but any day
>> now
>> I do expect DW to crap on me like a new born.
>>
>> Will it work for you? Maybe. Should you do it? Your
call there. Don't
>> expect DW
>> to be fully compatible with Vista until the release
of DW9.
>>
>> If DW is your only tool and MX 2004 is your only
version then wish you
>> luck if
>> you are diving head first into Vista. Hold off
unless you have multiple
>> computers
>> with one as a dedicated dev machine.
>>
>> Rob
>>
>> "Bill00" <[email protected]> wrote in
message
>> news:[email protected]...
>>> If 8 isn't supported, I'd really doubt that MX
is going to run well...
>>>
>>> --
>>> Extending Knowledge, Daily
>>>
http://www.communityMX.com/
>>> CommunityMX - Free Resources:
>>>
http://www.communitymx.com/free.cfm
>>>
>>> No registration req'd for free content
>>> "Murray *ACE*"
<[email protected]> wrote in message
>>> news:[email protected]...
>>>> Sounds risky to me.
>>>>
>>>> --
>>>> Murray --- ICQ 71997575
>>>> Adobe Community Expert
>>>> (If you *MUST* email me, don't LAUGH when
you do so!)
>>>> ==================
>>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>>>> ==================
>>>>
>>>>
>>>> "debushman"
<[email protected]> wrote in message
>>>> news:[email protected]...
>>>> > Does anyone know if Dreamweaver MX 2004
will install and run on the
>>>> > new
>>>> > Windows Vista?
>>>>
>>>>
>>>
>>>
>>
> -
Dreamweaver MX 2004 mis-pathed folders
Please bear with me, I am NOT a web developer nor even a
uperior
technical being. I do drive a computer for a living (CADD)
and for the
past year and a half have been updating and maintaining our
website,
which was built using Dreamweaver MX 2004.
The gal who built the site HATED Dreamweaver and sold me her
copy for
my own use when her work was complete. I have not had any
significant
problems with the program nor keeping the site current until
this past
week, when suddenly all the folders "point" to an incorrect
path name.
This feels like a Windows issue - all the folders and files
are still
present in the root directory they were created in, but
Dreamweaver
insists on looking in this new place - which incidentally is
a canned
Windows path, c:\MyDocuments\Owner\ etc etc. Yes, I have gone
to the
Files Site screen - got the main root folder to change, but
my Images
file folder is still inop.
Any suggestions would be MOST welcome - I do not look forward
to having
to copy off each and every individual file and then delete
and rebuild
from scratch! If I go that route I will also uninstall DW and
reinstall
the program - unless there's a better way?This is usually the result of linking to a file that is
OUTSIDE of the
current local site.
> Yes, I have gone to the
> Files Site screen - got the main root folder to change,
but my Images
> file folder is still inop.
What does this mean?
Was the site recently moved to a new system or something?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"halfpint23" <[email protected]> wrote
in message
news:[email protected]...
>
> Please bear with me, I am NOT a web developer nor even a
uperior
> technical being. I do drive a computer for a living
(CADD) and for the
> past year and a half have been updating and maintaining
our website,
> which was built using Dreamweaver MX 2004.
>
> The gal who built the site HATED Dreamweaver and sold me
her copy for
> my own use when her work was complete. I have not had
any significant
> problems with the program nor keeping the site current
until this past
> week, when suddenly all the folders "point" to an
incorrect path name.
> This feels like a Windows issue - all the folders and
files are still
> present in the root directory they were created in, but
Dreamweaver
> insists on looking in this new place - which
incidentally is a canned
> Windows path, c:\MyDocuments\Owner\ etc etc. Yes, I have
gone to the
> Files Site screen - got the main root folder to change,
but my Images
> file folder is still inop.
>
> Any suggestions would be MOST welcome - I do not look
forward to having
> to copy off each and every individual file and then
delete and rebuild
> from scratch! If I go that route I will also uninstall
DW and reinstall
> the program - unless there's a better way?
>
> -
Dreamweaver MX 2004 - "An Unidentifed Error has occorred." - Please help!!
Hi folks. I have scoured the internet for a fix to this problem. Most of the posts I read are unanswered or the solution does not work. I am hoping a guru reads mine and has the magic answer - I am ready to chuck the project altogether if I can't find a solution. Although I am not a newbie to simple page design, I have never really tackled data access (dynamic content) before, like I am about to. I am ready and willing to learn but this obstacle may hinder my interest if it is going to be this big a pain in the keester.
Let's start with my system config:
Windows XP Pro w/ SP3
Dreamweaver MX 2004
IIS 5.1 - configured with FTP support
PHP 5.2.11
MySQL 5.0 - For now I am using the Test DB that comes with MySQL. Using "root" account.
I have verified that all is running properly to the best of my knowledge. Certainly Dreamweaver up until this issue has worked for years. I have not used DW for data access before on this machine but have successfully on others.
IIS > Loads web content from http://localhost just fine. Including PHP test page. And IIS help stuff that comes pre-installed.
MySQL > I can build DB's and Schemas just fine. I can even import data from external sources so I have to assume it's running fine.
Dreamweaver > The site I am building has the following config:
Local Info
Site Name: medimj
Local Root: C:\medimj *set to refresh
Images: C:\medimj\images
HTTP: blank
Remote Info
Access: Local/Network
Remote Folder: C:\inetpub\wwwroot\medimj\ *set to refresh auto
Testing Server
Server Model: PHP MySQL
This site contains: Dreamweaver MX Pages Only (default)
Access: Local/Network
Testing Server Folder: C:\indetpub\wwwroot\medimj\ *set to refresh auto
URL Prefix: http://localhost/medimj
<<<Everything else I believe is irrelevant to the topic and left to defaults>>>
SO HERE IS WHAT IS HAPPENING:
When I go to make a data connection (Step 4 under the Database tab of Applications section in DW), I click the "+" button and select "MySQL Connection". The dialogue window appears and I input:
Connection Name: medimj
MySql Server: localhost
User Name: root
Password: <password>
I click "Select" button and get an error window that says "An Unidentified error has occurred." and I am taken back to the MySQL Connection dialogue box. I have tried adding http:, slashes, \medimj, IP address, and pipe name to the Server name to make the connection and none of it works. If I put a DB name and click "ok" the binding will appear but no table ever come into view. If I click on "Test" I get the same error.
Here is the mysql area of the test.php. From what I see, I should be able to make a connection; but I'm not expert. Should I be seeing more information?:
mysql
MySQL Support
enabled
Active Persistent Links
0
Active Links
0
Client API version
5.0.51a
Directive
Local Value
Master Value
mysql.allow_persistent
On
On
mysql.connect_timeout
60
60
mysql.default_host
localhost
localhost
mysql.default_password
no value
no value
mysql.default_port
3306
3306
mysql.default_socket
no value
no value
mysql.default_user
no value
no value
mysql.max_links
Unlimited
Unlimited
mysql.max_persistent
Unlimited
Unlimited
mysql.trace_mode
Off
Off
I just don't see what's wrong at this point. I really hope somebody here can help.
I've been at this for 4 days and uninstalled and reinstalled everything to no avail. I hope I have given enough information for someone to make a suggestion that will help. I thank anyone for their time in advance.
prdreamweaverI would like to share with everyone a fix for this problem. I wish I could say I found it here but I did not. After continuing to search the Internet, while eagerly awaiting an answer here, I stumbled upon the answer deep in a thread in the MySQL website forums.
If someone should find this topic before the supposed Adobe fix, please do not waste your time with what Adobe suggests. It has been know cause more problems than help - as was the case with me. Applying their "fix" forced me to reinstall MySQL and a fresh version of PHP. I am also providing OS information and versions of all components I am using as well as settings within Dreamweaver. I cannot speak as to whether this fix transitions across other versions of Dreamweaver but it's worth looking at if yours does not match mine.
NOTE: ALWAYS MAKE A RECORD OF WHAT YOU CHANGE. THIS IS BASIC TROUBLESHOOTING AND WILL MINIMIZE THE NEED TO REINSTALL IF THINGS GET WORSE. BEING ABLE TO REVERSE WHAT YOU'VE CHANGED IS IMPORTANT.
System Info
OS: Windows XP Pro w/ SP3 (patched to the hilt)
IIS: 5.1 (installed from XP Pro CD - additional windows components)
PHP: v5.2.11 (installer version)
MySQL: v5.0.87 (installer version)
Dreamweaver: MX 2004
Install IIS, PHP, and MySQL per their individual instructions.
IIS Tweaks
Note: This tweak assumes you haven't already created your website virtual directory under IIS. If you have, you can delete it and follow these steps. You don't have to but I like this recommendation I found on another site as it tricks DW into thinking its attaching to an "outside" server. You'll see what I mean when you see the DW confg options later in this topic.
1. Create a folder under c:\inetpub\wwwroot that matches the local folder in DW for the site you are designing. Make sure they are spelled the same. If you have pages and images already in your local folder for DW, you don't have to re-create them here. You can sync them to the "server" much like you would when you FTP your pages up to a live server. Just make sure the root folders are named the same.
2. Right click your localhost site select "properties". Click the "Home Directory" tab. Click on the "Configuration" button. Under "Application Mappings", click the "Add" button. A new dialogue box appears > In the "Executable" area, browse to the root PHP folder and select file "php5isapi.dll" and click ok to return to the dialogue box. In the "Extension" box type ".php" without the quotes. Make sure "Script Engine" and "Check that file exists" are checked. Click ok.
NOTE: A DIALOGUE BOX MAY APPEAR ASKING IF YOU WANT TO PROPOGATE THE CHANGES ACROSS ALL OTHER SITES. YOU CAN SAY YES BUT IT DOESN'T ALWAYS WORK. (IT'S AN IIS THING) TO SEE IF IT DID, CHECK THE PROPERTIES OF YOUR VIRTUAL DIRECTORY AND FOLLOW STEP TWO IF YOU DON'T SEE THE PHP MAPPING THERE.
PHP Tweaks
1. extension_dir = c:\php\ext ~ change folder to match your install
2. cgi.force_redirect = 0 ~ required for IIS
3. register_globals = On
4. register_long_arrays = On
5. extension=php_mysql.dll ~ removed the ;
6. extension=php_mysqli.dll ~ removed the ;
7. include_path = "."
8. mysql.default_host = localhost
9. mysql.default_port = 3306
**NOTE: IF I DIDN'T PUT QUOTES - NEITHER SHOULD YOU.
10. Save and Close
copy the file libmysql.dll
to c:\windows & c:\windows\system32 ~ this file is in the root of PHP 5 folder
XP Environment Variables: Add the following at the end of Paths> c:\<php folder>;c:\<php folder>\ext ~ change php folder for your install
NOTE: ANY CHANGES TO ENVIRONMENT VARIABLES HAS THE POTENTIAL TO CAUSE SYSTEM PROBLEMS IF NOT DONE CORRECTLY. MAKE SURE YOU HAVE A ";" AT THE END OF THE PATH BEFORE YOU ADD THE CHANGES.
REBOOT!!!! THESE CHANGES WILL NOT TAKE EFFECT UNTIL YOU DO SO.
DW - edit current site or create it new
Local Info:
Should be left however you have it now OR if creating new, just do it like you always have.
Remote Info:
Access : Local/Network
Remote Folder: C:\inetpub\wwwroot\<your virtual directory>
* Check Refresh Automatically
Testing Server:
Server Model: PHP MySQL
Access: Local/ Network
Testing Server Folder: C:\inetpub\wwwroot\<your virtual directory>
URL Prefix: http://localhost/<your site name>
* Check Refresh Automatically
** I don't make changes to anything else under site editing so I stop there. Click OK and you're done.
At this point, you should see under the "Application" section on the "Database" tab, steps 1,2,3 checked. Now create a connection by clicking the "+" button. Enter the following:
Connection Name: <whatever you want>
MySQL Server: localhost
User Name: root (or another account you have created with sufficient privileges)
Password:
Database: enter a DB name you wish to connect to or click select if you wish to browse for it.
You shouldn't get the "Unidentified Error..." message anymore. I know I don't.
I hope this helps the next poor sap this happens to. I'm sorry for the long post but I hate, hate, hate, when people post half assed instructions because they are too lazy to type.
Good luck everyone and happy designing!!!
prdreamweaver
email: [email protected]
(you can email me with questions but remember, I am not an expert with dynamic content. however, I am willing to assist if I can) -
Find and replace Dreamweaver mx 2004 problem: not opening saved queries
Dreamweaver mx 2004 is not opening saved queries! I use find and replace often and uses to save code replacements to reuse
it. But now when I open the saved query I have 2 situations:
1) comes completely blank
2) or only shows truncated text or code in fields.
I opened the dwr file in text editor and seems to be fine, I mean information saved is there.
Tried recreating cache, or deleting caché, tried saving new or overwritting existant ones, tried saving into a completely different location,
tried in other site definition. Nothing seems to work...Which FTP app did your predecessor use to upload files? If it's still on your work station, it should contain the log-in credentials.
You'll find a few utilities online for revealing passwords
http://www.rixler.com/?gclid=CJeUxd775LkCFWZk7AodyiAAaQ
Nancy O. -
Installed Dreamweaver MX 2004 update for Windows and now Dreamweaver won't open. Help?
I was having some glitches uploading to a host I ftp to often so I decided to check for a Dreamweaver update for MX 2004. When I found the Windows update and tried to install - it told me to uninstall Extensions. I uninstalled extensions and continued with the installation of the update. Now Dreamwever will not open at all - it says Dreamweaver MX 2004 has stopped working. I can see the update is installed since the version is 7.0.1. Any ideas on how to undo the update? I have no idea where this program disk is right now for reinstallation plus all my servers are already setup....
You might try Windows System Restore to a point before you installed the update.
Good luck.
Nancy O. -
Cannot activate Dreamweaver MX 2004 on Windows 7 64 bit pc?
Hello.
Does anybody in here know how to activate Dreamweaver MX 2004 on a Windows 7 64 bit pc?
I keep getting the message that there is an internet connection problem.
I have deactivated my firewall etc., but it doesn't help me.
Anybody got an idea? Adobe Chat does not have the answer for me!
Regards Anders FjWow! Thank you. It Works! Clever!
This is really helpful for those
of us who are nore professionals. I only use Dreamweaver MX 2004 to
maintain and repair my own small homepage with photos. And I know how to
use Dreamweaver MX 2004 and I am not interested in learning new tools -
not now
ONE MORE QUESTION THOUGH: Where and how do I update my
Dreamweaver MX 2004 now that I have installed Dreamweaver MX 2004 on my
new Win 7 64 bit pc?
Regards
Anders Fjeldberg, Denmark
Ken Binney
skrev den 2014-05-04 00:01:
CANNOT ACTIVATE DREAMWEAVER MX 2004 ON
WINDOWS 7 64 BIT PC?
created by Ken Binney in _Dreamweaver
support forum_ - View the full discussion
> -
Creating a Photo Album In Dreamweaver MX 2004
I followed the steps to create a web photo album using
Dreamweaver MX 2004 and Fireworks and it creates it. However, I
can't get it to display on the web when I upload it. It displays
the message "Page can not be found". Please help!I think the fact that you have spaces in your files/folder
names is bound to
have created problems. I suggest you do some renaming and
re-upload.
BTW it is incredibly difficult to access pages on the site.
If Alan hadn't
put the link in I would have given up.
Jo
"Alan" <[email protected]> wrote in
message
news:C0D03CEE.295268%[email protected]..
>
>
>> Ithe link is on my Events page. you can get to it by
entering the site
>> and
>> clicking the events link.
>
>
http://www.arelevantministry.com/photo%20album/index.htm
>
> have you selected and PUT all the files?
>
> find "photo%20album" folder, select and Put it.
> do all the files transfer?
>
>
>
Maybe you are looking for
-
Background report save as PDF or excel
Hello Guru's, I have a requirement my user execute one report in background now the output is appearing in ALV He wants now that is output should save as PDF or excel & send email to respective persons. Can we do this if yes please guide.I will be ex
-
Error configuring WLI for Oracle 9i
Anyone else seen this . I am using the latest Oracle 9.2 driver. =============================================================================== Loading data from 'D:\BEA\wlintegration2.1\dbscripts\SystemRepData.xml' into database ===================
-
Everything is fine in my HD 720p24 Motion project. But when it comes to exporting it as a Quicktime movie, the project gets vertically squeezed...as though Motion were squeezing 16x9 into 4x3. Does anyone know the solution to this problem??? Isn't th
-
Using XML PIVOT clause in SQL to generate crosstab report BI Pub. Possible?
I am trying to use the XML version of the Pivot Clause in an SQL query to generate the SQL needed for a cross tabular or Pivot report in BI Publisher. How can I use the output (e.g. below) in BI publisher as the SQL query? It is ignoring the XML colu
-
The download server doesn't deliver anything to my Mac
The upgrade notification opens and wants me to download the latest version. I accept and press download. Then the box says my Mac is connecting to the download server and nothing happens. And I am doing this while using Firefox 33.0.3