Dreamweaver MX 2004 update file is corrupt
Dreamweaver MX 2004 update 7.0.1 is corrupt on your site (English version). How do I find a working file to download?
This means that your DMX2004 is already at the most current
release level.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"swim4it" <[email protected]> wrote in
message
news:e5mviq$fc6$[email protected]..
> I've tried to update my Dreamweaver MX 2004 - but
everytime I start going
> through the install it says that Dreamweaver is not
found within the
> Macromedia/Dreamweaver folder and therefore can't
install. I've verified
> that
> the application is in that folder. Is anyone else having
this problem? I
> was
> told by our IT department that he tried installing a
fresh copy of
> Dreamweaver
> on his new computer and then installing the udpate and
he came across the
> same
> problem.
>
> Any news/ideas about this?
>
Similar Messages
-
Installed Dreamweaver MX 2004 update for Windows and now Dreamweaver won't open. Help?
I was having some glitches uploading to a host I ftp to often so I decided to check for a Dreamweaver update for MX 2004. When I found the Windows update and tried to install - it told me to uninstall Extensions. I uninstalled extensions and continued with the installation of the update. Now Dreamwever will not open at all - it says Dreamweaver MX 2004 has stopped working. I can see the update is installed since the version is 7.0.1. Any ideas on how to undo the update? I have no idea where this program disk is right now for reinstallation plus all my servers are already setup....
You might try Windows System Restore to a point before you installed the update.
Good luck.
Nancy O. -
Dreamweaver MX 2004 Update?
I've tried to update my Dreamweaver MX 2004 - but everytime I
start going through the install it says that Dreamweaver is not
found within the Macromedia/Dreamweaver folder and therefore can't
install. I've verified that the application is in that folder. Is
anyone else having this problem? I was told by our IT department
that he tried installing a fresh copy of Dreamweaver on his new
computer and then installing the udpate and he came across the same
problem.
Any news/ideas about this?This means that your DMX2004 is already at the most current
release level.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"swim4it" <[email protected]> wrote in
message
news:e5mviq$fc6$[email protected]..
> I've tried to update my Dreamweaver MX 2004 - but
everytime I start going
> through the install it says that Dreamweaver is not
found within the
> Macromedia/Dreamweaver folder and therefore can't
install. I've verified
> that
> the application is in that folder. Is anyone else having
this problem? I
> was
> told by our IT department that he tried installing a
fresh copy of
> Dreamweaver
> on his new computer and then installing the udpate and
he came across the
> same
> problem.
>
> Any news/ideas about this?
> -
3.11 update file is corrupt - cannot extract
For a few days now I have been unable to update my copy of
Contribute because the update file I download is corrupted every
time. I've tried both the 3.1 & 3.11 update zip files, two
computers (work & home), and two web browsers (Firefox &
IE). At home I tried using WinRAR instead of the WindowsXP's zip
file support and that gave me this error: "C:\Documents and
Settings\sean\Desktop\contribute_3_11_updater.zip: CRC failed in
Contribute_3.11_Installer.exe. The file is corrupt".
Can someone help me? Is there another site with these files
to download?
ThanksSee the further information area of Troubleshooting issues with iTunes for Windows updates for direct download links and obtain a fresh copy of the installer. Disable Norton's real time scanner during the download/update if necessary.
tt2 -
Dreamweaver template to update file other than html?
Hi,
I am using Dreamweaver CS4 to manage my website.
The problem is i cannot get Dreamweaver to update my .tpl (php template)
Any idea?
ThanksThanks,
I finally figure it out how to get if fix.
May be i should say it clear, i use dreamweaver template which is a dwt file to update all html pages in my website.
But some of the file i use which is tpl extension (the same as html file but with template variables). The dreamweaver
did not recognize it. The page did not show up when i make changes in dwt file.
Then what i do is change the "configuration" > "DocumentTypes", so that dreamweaver recognize tpl as a type of html file.
After that i change extension.txt file also. Rebuild site cache. And now its done. -
Dreamweaver CS3 - Not Updating Files
I have this problem since upgrading from Dreamweaver MX2004
to CS3. I edit files on my local machine. I then tell Dreamweaver
to syncronize files and put newer to remove (which it does). But
when I check the remote nothing has been updated. Lately I have
been getting the message about files being newer on the remote when
they are not. I tried the fix of unchecking synchronization info
and then re-checking, but it still does not update anything. I
noticed that I modified a file at 11.01am, and uploaded it. It
didn't update but the remote file is showing as being modified same
date but 6.15pm.
Is there something I'm doing wrong? I have been using
Dreamweaver for about 6 years with no problems.
Many thanks
Alan.Give me the code from a link that is not managed by DW,
please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Rockysowner" <[email protected]> wrote in
message
news:e2eoj3$idn$[email protected]..
>I am still having problems getting Dreamweaver 8 to work
the same way as my
> Dreamweaver MX2004. When I use the file panel in
Dreamweaver 8 to change
> the
> name of a file it does not update my links throughout
out site. I have
> gone to
> EDIT > PREFERENCE and made sure that update links
when moving files and
> the
> Prompt box is checked.
> I have also tried Site > Advanced > Recreate Site
Cache but it's not
> working.
>
>
> Can anyone please help. Thank you.
> -
an error occurs that firmware file is corrupt while updating my iphone4 software.what does it mean and how it can be minimized.? plz help
https://discussions.apple.com/message/6028012#6028012
https://discussions.apple.com/message/7909876#7909876 -
The iPod could not be updated because the firmware file was corrupt.
So i kept having this problem in this thread here: http://discussions.apple.com/thread.jspa?threadID=1226490&tstart=255
I decided that maybe doing a Restore on my iPod would maybe sort it out however i got that message "The iPod could not be updated because the firmware file was corrupt." when trying to restore. I then searched apple and found out that deleting the 'iPod Software Updates' folder would sort it out, it didn't.
Now what's happening is when i try to restore it comes up saying i have to download this iPod Software 1.2.1 for iPod so it downloads and then when it's finished i'm still getting the error message saying the firmware file is corrupt.
What can i do now? any help appreciated please.this article actually sorted this problem out for me: http://docs.info.apple.com/article.html?artnum=304996
just to let you know -
IPod could not be updated because the file is corrupt.
iTunes refueses to update my iPod touch to 2.0.1. The download appears in the que as 1.5kb (which it certainly isn't), and then after downloading, a message tells me the iPod can't update because the firmware file is corrupt. It also says to reconnect and try again, but that doesn't do anything. HELLLPPP.
See if anything here helps: What to do if iPod can't be updated because
the firmware file was corrupt or not found
That was the answer. A very easy fix when you know what to do. Thank you for your help. -
Software could not be updated because the firmware file was corrupt
I just received my iPad yesterday and I saw there was a new update to the OS(from 3.2.1 to 3.2.2). I tried to install it and after downloading the 450 MB file it gave me the error "The iPod "ipod name" Could not be updated because the firmware file was corrupt", so I tried it again and again got hte same error; so I tried researching and saw several possible solutions, including re-installing iTunes, so I decided to try it on a different machine, same error. I don't want to keep downloading huge files, so I'm wondering if anyone knows some possible solutions? I've tried this on both a Windows XP and Windows 7 machine.
Hi, I had the same problem: firmware was corrupted on the update. I managed to fix it by logging in to my administrator account and leting iTunes do a reset. I have no media or apps on that iTunes account so it was relatively straight forward. Once reset and update was complete I logged back into my user account and let my usual iTunes account reinstal all my media and apps.
Be sure to backup your iPad before doing a reset.
This may help; you may also like to contact iPad Support for assistance. -
in dreamweaver mx 2004 and dreamweaver cs4, how I configure, when download/upload do not ask me to include DEPENDED FILES but act without including ?
Open the Preferences panel (Edit menu on Windows, Dreamweaver menu on a Mac), and select the Site category. There are two checkboxes there for dependent files. Make sure both are selected. The Dreamweaver default is NOT to upload/download dependent files. You need to click Yes, if you want the dependent files to be included.
-
Dreamweaver mx 2004 in a php file I insert in head the
I use dreamweaver mx 2004, well in a php file I insert in
<head> the:
<base href="
http://www.Polis-Land.com/dialup"
/>
but only images[status bar-browser show this] that link to
external popup windows, all other links show eg.:
<a href="/villas/thalassa.php">THALASSA VILLAS -
LATCHI</a>
show
http://www.polis-land.com/villas/thalassa.php
rather than
http://www.polis-land.com/dialup/villas/thalassa.php
the disired , well ?
You can find php file at
http://www.polis-land.com/dialup/villas/villas.php
I have changed only one link I try
<a href="villas/thalassa.php">THALASSA VILLAS -
LATCHI</a>
but same thing...
Please note that images show:
http://www.polis-land.com/dialup#
well ???All links in a template file must be correct based on the
location of the
Template file. DW will manage them for you when you spawn
child pages.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Alan" <[email protected]> wrote in
message
news:C39E9C5B.2E6A11%[email protected]..
>
>
>> You mean make it :
>> <a href="index.php">HOME</a>
>
> No. In the template file that's in the Template folder,
it would be:
> <a href="../index.php">HOME</a>
>
>> Can I use this template for the dsl mode (no base
url) ?
>
> Yes- if by that you mean them to be document relevant
links that actually
> go
> where they point.
>
> --
> Alan
> Adobe Community Expert, dreamweaver
>
>
http://www.adobe.com/communities/experts/
>
>
> -
i try to restore ipad to ios 7.0.4 but the tunes show error ,the ipad could not be restore because the firmware file was corrupt, i have the latest update from itunes and windows and i turn off antivirus and firewall and the error is the same , what i do?, my ipad is show apple logo
please what i doHello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H. -
Everytime I try to download a newer version of Mozzilla Firefox it starts to download, then displays a run box, and when you push the run button, a box appears and says file is corrupt. I recently installed windows 7 and I have slow internet.
Any apps that she downloaded onto the device are tied to her apple ID. They cannot be transferred to another account. To update those apps, you would either need her password, or you could delete the apps and download them using your own apple id.
-
NSS6000 "Firmware Update Error: The firmware image file is corrupt."
Hello All,
I've recently run into a problem trying to update the firmware on our NSS6000 to either 1.20.1 or 1.21.0. We are currently running 1.16-3.
Each time after I click "Upgrade Firmware", the upgrade fails with the same error: "Firmware Update Error: The firmware image file is corrupt. Obtain another copy of the file and try the firmware upgrade again".
I've tried re-downloading the NSS6000_FW_1.20.1.tar.gz and NSS6000_FW_1.21.0.tar.gz several times from multiple PCs, and using multiple browsers. I've tried several combinations of Windows Server 2003R2, Windows Server 2008R2, Windows 7, and Firefox, Chrome, and IE 8/9.
The downloads all appear to be fine, and they all can open/extract with 7-zip without issue. The file sizes are always the same.
No combination of OS/Browser yields a different result on the upgrade attempt either.
I tried renaming NSS6000_FW_1.21.0.tar.gz to NSS6000_fwupgrade_0121.tar.gz to match the convention used in early versions (thinking that the extra "."'s could be the issue) but no luck either.
I was able to successfully re-apply the NSS6000_fwupgrade_0116.tar.gz firmware without any issues at all.
A strange thing I noticed, though, was on the "The system will reboot now. Please close your browser." window, it shows the device as an "NSS2000 2-Bay Gigabit Network Storage System" (please see attached screenshot). I'm chalking that up to a simple reusing-the-same-web-code issue rather than the root of the problem, but thought I should mention that as well.
Has anyone else run into this issue, or have any suggestions for workarounds in order to successfully upgrade the FW on this device? Thanks in advance for any suggestions.Hi,
Not sure what is going on i haven't see the issue you are having, can you try downloading both images at a different location; instead of behind your router. Also upgrade to .20 and then .21. Im pasting the release notes upgrades step.
When upgrading the firmware from v1.12 to v1.14, v1.12 to v1.20.1, or v1.12 to
v1.21.0 the Configuration GUI displays a "Programming images.." message
for more than 12 minutes (the time it takes to upgrade the firmware is
usually 5 to 10 minutes).
The workaround is to wait at least 15 minutes to complete the upgrade and
then power cycle the NSS by removing the power cord. Do not try and
access the Configuration GUI during this time. (CSCsx17923) When upgrading the firmware from v1.12 to v1.14, v1.12 to v1.20.1, or v1.12 to
v1.21.0 the Configuration GUI displays a "Programming images.." message
for more than 12 minutes (the time it takes to upgrade the firmware is
usually 5 to 10 minutes).
The workaround is to wait at least 15 minutes to complete the upgrade and
then power cycle the NSS by removing the power cord. Do not try and
access the Configuration GUI during this time. (CSCsx17923)
If this don't help you might have to give us a call @ 1-866-606-1866 and open a support case.
Thanks,
Jasbryan
Cisco Support Engineer
Maybe you are looking for
-
I have decided since my realplay program is not working i would try to use the windows media player instead but when i open it up it says there are no file on my ipod shuffle whn i know there is for a fact . How can i get it to work or is there a pro
-
Please suggest problem in increasing height repeating frames
Hi, in my report normally up to 100 are printed. i setted the vertical elasticity as expand and horizontal as fixed. but while priting, in vertical, it is contracting if date is too short enough and expanding when dat is large enough. But what my req
-
Explosion of BOM In sales order
Hai Techies, I have a clarification in the BOM explosion in sales order. How to make the setting for the first or second level of BOM to explode in the sales order? If we do so can we change the respective BOM in the sales order and save it specific
-
Hi, I am having a problem sending a message to a Group in my Address Book-- I get this error message: "[SUSPEND] The mailbox is currently unavailable - please contact correspondent directly." It then prompts me to choose another SMTP server. Since I
-
Hi All, I want to upload All Bank Details from flat file with one report for all the countries. Report-RFBVALL_0 (T code-BAUP) uploads only for one country at a time. There are more that 150 countries. Is there some standard report exist? Or some fun