Dreamweaver MX 6.01 - will it run under Vista

I use dreamweaver MX vs 6.01. I plan to buy a new computer
with Vista.
Questions:
1. will dreamweaver MX 6.01 run under Vista?? I don't wish to
upgreade
2. which Vista would be best.??
thanks!!!!

Given that version 8 is not classed as being Vista
compatible, earlier
versions are unlikely to be.
In terms of which Vista version it all depends upon what you
want to use the
box for.
Paul Whitham
Certified Dreamweaver MX2004 Professional
Adobe Community Expert - Dreamweaver
Valleybiz Internet Design
www.valleybiz.net
"ingesantarosa" <[email protected]> wrote in
message
news:f5a3c6$d0m$[email protected]..
>I use dreamweaver MX vs 6.01. I plan to buy a new
computer with Vista.
> Questions:
> 1. will dreamweaver MX 6.01 run under Vista?? I don't
wish to upgreade
>
> 2. which Vista would be best.??
> thanks!!!!
>
>
>

Similar Messages

SQL script runs under SQL Devoper, will not run under UNIX, SQLPlus

I have a sql program I developed under the SQL Developer tool and it runs fine. I have ftp'd the sql to the Unix server and I am trying to run the same program under SQL Plus in unix. The program echo's back the line number that is the last line number in the code before the 'Exception' code in the program and it goes out into never never land.
I can't figure out why this runs under SQL Developer but will not run under SQLPlus in Unix. Any ideas would be appreciated!!!!

Assuming that the ftp process did not append any invisible characters(which it usually does) at the end of each line,
did you put the '/' symbol at the end of your program before running in sql*plus
something like
begin
end;
/

Will CS3 work under Vista

Stupid question I know, but just to double check, will CS3
run under Windows
Vista?

Thank you great God Adobe :o)
"Murray *ACE*" <[email protected]> wrote
in message
news:evfuvp$3dv$[email protected]..
> Thank Adobe! 8)
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.dreamweavermx-templates.com
- Template Triage!
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
> ==================
>
>
> "@ndyB" <[email protected]> wrote in message
> news:evfsnq$q0$[email protected]..
>> Thank you :)
>>
>> @
>>
>> "Murray *ACE*"
<[email protected]> wrote in message
>> news:evfrtl$t7e$[email protected]..
>>> Yes.
>>>
>>> --
>>> Murray --- ICQ 71997575
>>> Adobe Community Expert
>>> (If you *MUST* email me, don't LAUGH when you do
so!)
>>> ==================
>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>>> ==================
>>>
>>>
>>> "@ndyB" <[email protected]> wrote in
message
>>> news:evfrm4$t00$[email protected]..
>>>> Stupid question I know, but just to double
check, will CS3 run under
>>>> Windows Vista?
>>>>
>>>
>>>
>>
>
>

InDesign CS4 will not run under Lion

I have InDesign CS4 and Design Suite CS3. All my other CS3 apps run under Lion. The Upgrade to Lion failed leaving my internal unbootable, so I installed and migrated to an external drive. But after the upgrade to Lion all of the other CS 3 aps run, IDCS4 will not run. I get the following message:
Adobe InDesign is missing required system fonts or CMap files. Please reinstall InDesign.
I used the uninstaller and reinstalled. No affect. I made the Library folder visible. No effect. I cant

There is a very long list of incompatibilities with Lion:
http://kb2.adobe.com/cps/905/cpsid_90508.html
I'm sure there are many more that are unknown.
FWIW, I highly recommend sticking with Snow Leopard for now and when you do upgrade, do so as a clean install.
John will be along soon to tell you to ignore the man behind the curtain.
Bob

JDBC Driver 10.2.0.3 will not run under Java 1.4

While using Oracle Database 10g Release 2 (10.2.0.3) JDBC Drivers my application will not run with Java 1.4
I keep getting an ArrayIndexOutOfBoundsException, followed by a number. Running 10.2.0.3 with Java 1.5 does not give this error. If using Oracle Database 10g 10.1.0.2 JDBC Drivers that error does not occour either.
I am running other applications with 10.2.0.3 with Java 1.4 that does not have this error.
Anyone know about this problem?
Stacktrace:
java.lang.ArrayIndexOutOfBoundsException: 103205256
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java(Compiled Code))
at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:810)
at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1039)
at oracle.jdbc.driver.T4CPreparedStatement.executeMaybeDescribe(T4CPreparedStatement.java:850)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1134)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3339)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3384)
at org.apache.commons.dbcp.DelegatingPreparedStatement.executeQuery(DelegatingPreparedStatement.java:92)
at org.hibernate.jdbc.AbstractBatcher.getResultSet(AbstractBatcher.java:186)
at org.hibernate.loader.Loader.getResultSet(Loader.java:1787)
at org.hibernate.loader.Loader.doQuery(Loader.java:674)
at org.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:236)
at org.hibernate.loader.Loader.doList(Loader.java:2220)
at org.hibernate.loader.Loader.listIgnoreQueryCache(Loader.java:2104)
at org.hibernate.loader.Loader.list(Loader.java:2099)
at org.hibernate.loader.criteria.CriteriaLoader.list(CriteriaLoader.java:94)
at org.hibernate.impl.SessionImpl.list(SessionImpl.java:1569)
at org.hibernate.impl.CriteriaImpl.list(CriteriaImpl.java:283)
at org.springframework.orm.hibernate3.HibernateTemplate.execute(HibernateTemplate.java:362)
at org.springframework.orm.hibernate3.HibernateTemplate.executeFind(HibernateTemplate.java:332)

I did not know where to put it. I did a search and saw others who had postet here regarding Oracle driver.
I do not know why it ended up here. I ment to post it at Java » SQLJ/JDBC
Message was edited by:
user619696

Oracle Driver 10.2.0.3 will not run under Java 1.4

While using Oracle Database 10g Release 2 (10.2.0.3) JDBC Drivers my application will not run with Java 1.4
I keep getting an ArrayIndexOutOfBoundsException, followed by a number. Running 10.2.0.3 with Java 1.5 does not give this error. If using Oracle Database 10g 10.1.0.2 JDBC Drivers that error does not occour either.
I am running other applications with 10.2.0.3 with Java 1.4 that does not have this error.
Anyone know about this problem?
Stacktrace:
java.lang.ArrayIndexOutOfBoundsException: 103205256
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java(Compiled Code))
at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:810)
at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1039)
at oracle.jdbc.driver.T4CPreparedStatement.executeMaybeDescribe(T4CPreparedStatement.java:850)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1134)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3339)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3384)
at org.apache.commons.dbcp.DelegatingPreparedStatement.executeQuery(DelegatingPreparedStatement.java:92)
at org.hibernate.jdbc.AbstractBatcher.getResultSet(AbstractBatcher.java:186)
at org.hibernate.loader.Loader.getResultSet(Loader.java:1787)
at org.hibernate.loader.Loader.doQuery(Loader.java:674)
at org.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:236)
at org.hibernate.loader.Loader.doList(Loader.java:2220)
at org.hibernate.loader.Loader.listIgnoreQueryCache(Loader.java:2104)
at org.hibernate.loader.Loader.list(Loader.java:2099)
at org.hibernate.loader.criteria.CriteriaLoader.list(CriteriaLoader.java:94)
at org.hibernate.impl.SessionImpl.list(SessionImpl.java:1569)
at org.hibernate.impl.CriteriaImpl.list(CriteriaImpl.java:283)
at org.springframework.orm.hibernate3.HibernateTemplate.execute(HibernateTemplate.java:362)
at org.springframework.orm.hibernate3.HibernateTemplate.executeFind(HibernateTemplate.java:332)

Use ojdbc14.jar with JDK 1.4.
http://www.oracle.com/technology/software/tech/java/sqlj_jdbc/htdocs/jdbc_10201.html

Elements 6 Runs under Vista 64 BUT nothing happens !

Under Vista 64bit OS I have installed the elements 6 software and the installation completed fine. When I start the
program nothing happens. I have inserted an SD card into my PC and the Adobe Photo Autodownloader started OK, so at least part of
the software is working.
I have tried an uninstalled and reinstall but this makes no difference. If I open the program, nothinghappens. The process appears in Task Manager as running Photoshop Element 6.0.exe but the application does not start. Aside from the entry in the Task Manager there is no sign of the application actually running.
I have an open problem with Adobe but so far they have sent one suggested fix that was for a different application on a different operating system ! Plus one suggested fix that was for a different problem !
Has anyone seen this and/or can provide any suggestions.
Any help would be very much appreceated. !

Hi,
Thanks for this suggestion . I have tried this twice but it does not seem to make any difference so I still have the problem where nothing happens when I run the application.
Not sure if anyone else has this issure.
Adobe support suggested this as well (a few hours after yourself).
Any other suggestions out there ?

ZEN touch won´t run under vista,also problem with firmware upda

i tried to connect my zen touch 20gb with my vista ultimate pc but it didnt work so i tried it by setting up a virtual machine (with xp on it running) and it recoknized it. then i tried to update the firmware and now i ended up with version 0.0. and can't put on another one....could someone explain to me how i can update the firmware (on xp or vista, nevermind) so i can use it again ?
tia,
chris?

I set up a fmware workstation virtual machine running winXP, after doing so it suddenly recognized the player also under vista (after selfinstall under the virtual xp-station!!!) , it was available as a virtual dri've and as a zen touch. i tried to update the firmware then under the xp sys but it had winMediaplayer on it which didn?t work with the zen touch as far as i know.On the VIsta machine? i tried to updade(get it to run) for hours, then tried to do everything new and started to remove every software and folders with creative parts in it, tried again etc but it wouldn?t work. the zen gave me a) the screen "syncroising" (for ever) or b)format, update firmware etc as options which didn?t work
?under _which_ system do i have to install _which_ firmware, software and what can the media player cause on problems please ?
i?m a music-junkie and i really NEEEEEEEEEED this machine !!!
thx in advance *bow*
chris?

Will Firefox run on VISTA 64?

I am having problems installing Firefox 6. A question came to mind IF Firefox6 will run in VISTA 64?

Yes, Firefox 6 runs on Vista 32 or Vista 64. Firefox itself is a 32-bit application.
[http://www.mozilla.org/en-US/firefox/6.0/system-requirements/ Mozilla Firefox 6 System Requirements]
This might help: [http://support.mozilla.com/en-US/kb/Installing%20Firefox%20on%20Windows Installing Firefox on Windows | How to | Firefox Help]

Syncing Outlook 2007 Calendar running under Vista to IPOD Nano

I have an Ipod Nano and am having an issue with syncing my Outlook 2007 calendar. I am running under Windows Vista. I do get the following error but cannot seem to find a way around it.
"Itunes cannot sync calendar to the Ipod administrator. Try logging out of Windows and then back in"
I have tried following directions on Apple support site, but nothing works.
Any suggestions?

For anything other than music, videos, and photos, I use a 3rd party program like iPodGadget (www.ipodsoft.com). iTunes just isn't reliable when it comes to calendars and contacts.

Dreamweaver (part of CS6) will not run on 64 bit Windows 8 PC

This package ran okay on my Windows 7 64 bit PC. I upgraded the Windows 7 PC to 64 bit Windows 8. Reinstalled all software including CS6. Dreamweaver will not start and comes up with a Error 7b. I have updated all the drivers including the graphics card. It seems that all CS6 programs that load up in a 32 bit mode are suspect in Windows 8. I have downloaded and updated all Adobe programs but still a problem. Looking for ideas as Adobe help is only Monday to Friday.

When you upgraded Win7 to Win8, was that process itself a clean install - meaning did you reformat the hard drive (or use a separate hard drive) thereby installing a fresh copy of Win 8?
I recently upgraded to Win 8 64bit as well, and from Win7 64bit, but I didn't want to run the risk of loosing access to any of my Win7 Apps or files should I find Win8 unbearable, so I ran the upgrade on a separate hard drive, which gave me the option to boot into either 7 or 8. Actually, Vista is on a third drive, left over from my Win7 upgrade in 2009. ;-)
I'm about 3 weeks in, and so far I have had no problems at all with any CS6 app on Windows 8. 8 seems faster, more responsive, but that could be because it's a new installation.

ColdFusion 5 - will it run under Windows 2003 Enterprise Server R2?

I currently have ColdFusion 5 running on Windows 2000 and
need to upgrade the os
to 2003 Enterprise R2. I don't know, but I'm guessing, it
will easier to continue using 5
than to upgrade to 7 or 8.

It could be a couple things;
CTC only runs (and / or only runs well) on the specified version of JRE. It doesn't like anything older, it doesn't like anything newer ... the suggested version (1.3.something last time I looked - I don't remember off the top of my head).
CTC takes forever to initialize (in some cases on our Lab stuff, I'm talking minutes ... up to 5-7 MINUTES before anything comes up).
Start it and go have lunch, if it's not up when you get back, downrev your JRE and try again (then go home for the night, and see if it's up in the morning).
If it's still not up, then try it on Windows 2000 server (or a VMware / VirtualPC session on S2003).
If you're running it through something like a Citrix server, take a vacation for a few days ....
This is not one of Cisco's finest software endeavours.
Good Luck
Scott

Time machine will not run under lion

I read somewhere that one needs a different version of time machine for lion. Where do I get it?

Good monring all
Have upgraded a brand new i7 27" imac to the latest OSX 10.7.1. This is the SSD + 2TB HD iMac.
When I have been run Time Machine to backup on an external 2TB SATA drive (where the 2TB backup disk is mounted in a NexStar docking station) Time Machine will make a clean copy of tyhe whole backup structure the first time. However, subsequent invcrement backups are failing with the error:
Time Machine could not complete the backup.
Unable to complete backup. An error occurred while creating the backup folder.
Does anyone know what might be causing this please.
Raymond Haynes
[email protected]

Will Aperture run under OSX Server?

Greetings,
I am somewhat hardware constrained at the moment, and the best platform I have for running Aperture is currently running OS X Server (10.4). It is very lightly loaded, but it would be very disruptive to change it over to client. Does anyone know if Apeture will run on Server?
Thank's.

Yup - I know that servers shouldn't be run as workstations. However, hardware constraints mean that a light-duty server might need to be pressed to run Aperture for a while.
Also - I know it shouldn't matter (as OSX and OSX Server are really not different OS's, but that OSX Server is just a superset of OSX), however that doesn't mean that Apeture doesn't check when it starts, etc.

Reposcan x64 will not run under Windows 2008 Server R2....

Hello,
When i run from the command line
reposcan.exe -dbdriver sqlserverdatabasesubsytem -connect u201CUID=xx;PWD=xxxxxxx;DSN=xxxxxxxxu201D -dbkey xxxxxxx -inputfrsdir u201CC:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\FileStore\Inputu201D -outputfrsdir u201CC:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\FileStore\Outputu201D -outputdir "c:\reposcan logs" -repair true
reposcan pops up for 1 second and closes, no log outputed
I have also tried...
A text file called Reposcan.txt
-dbdriver sqlserverdatabasesubsytem
-connect u201CUID=xx;PWD=xxxxxx;DSN=xxxxxxxxxu201D
-dbkey Linfxxxxxxx
-inputfrsdir u201CC:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\FileStore\Inputu201D
-outputfrsdir u201CC:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\FileStore\Outputu201D
-repair false
"C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win64_x64\reposcan.exe" -optionsfile "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win64_x64\reposcan.txt"
none of the above work, any ideas?
I am running with admin privliage
Edited by: davitali on Dec 28, 2011 3:58 PM

Problem solved.
Solution:
1. Create two files, Reposcan.bat and Reposcan.txt
2. In windows 2008 x64, right click on reposcan.bat and select "Run as Administrator"
3. When running the first time, remove the "-repair" option from reposcan.txt. Check the results in the ouput diectory
4. Before inserting the repair option, backup CMS, CMS_Audit tables and also the entire Business Objects Directory
Reposcan.bat
"C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win64_x64\reposcan.exe" -optionsfile "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win64_x64\reposcan.txt"
Reposcan.txt
-dbdriver sqlserverdatabasesubsystem
-connect "UID=xx;PWD=xxxxxx;DSN=xxxxxxxxx"
-dbkey xxxx
-repair
-inputfrsdir "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\FileStore\Input"
-outputfrsdir "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\FileStore\Output"
-outputdir "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\reposcan"

Dreamweaver MX 6.01 - will it run under Vista

Similar Messages

Maybe you are looking for