Dreamweaver MX 6 and Windows 7.

Does anyone know if Dreamweaver MX Ver. 6 will run under Windows 7? Thanks much!

MX came out a very long time ago and there are no new updates for it.
It might work in Compatibility mode.
http://windows.microsoft.com/en-US/windows7/Make-older-programs-run-in-this-version-of-Win dows
Win XP in Virtualbox.
http://www.howtogeek.com/howto/12183/how-to-run-xp-mode-in-virtualbox-on-windows-7/
Upgrading to DW CS5.5 might be your best option.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/

Similar Messages

Dreamweaver MX 2004 and Windows Vista

Does anyone know if Dreamweaver MX 2004 will install and run
on the new Windows Vista?

Looks like the only thing I can't do is establish a
connection to a db. I
get a 405 error with both DWX 2004 and DW8 trial.
If I manually setup the string in code it will work, but then
you can't use
server behaviors.
Just an FYI
"Rob" <[email protected]> wrote in message
news:[email protected]...
> That's strange, windows mail made that turn out wacked.
>
> "Rob" <[email protected]> wrote in message
> news:[email protected]...
>> debushman,
>>
>> I have been running Sudio MX 2004 on Windows Vista
Ultimate with no
>> issues yet.
>> I have used DW more than the others and mainly in
code view, but any day
>> now
>> I do expect DW to crap on me like a new born.
>>
>> Will it work for you? Maybe. Should you do it? Your
call there. Don't
>> expect DW
>> to be fully compatible with Vista until the release
of DW9.
>>
>> If DW is your only tool and MX 2004 is your only
version then wish you
>> luck if
>> you are diving head first into Vista. Hold off
unless you have multiple
>> computers
>> with one as a dedicated dev machine.
>>
>> Rob
>>
>> "Bill00" <[email protected]> wrote in
message
>> news:[email protected]...
>>> If 8 isn't supported, I'd really doubt that MX
is going to run well...
>>>
>>> --
>>> Extending Knowledge, Daily
>>>
http://www.communityMX.com/
>>> CommunityMX - Free Resources:
>>>
http://www.communitymx.com/free.cfm
>>>
>>> No registration req'd for free content
>>> "Murray *ACE*"
<[email protected]> wrote in message
>>> news:[email protected]...
>>>> Sounds risky to me.
>>>>
>>>> --
>>>> Murray --- ICQ 71997575
>>>> Adobe Community Expert
>>>> (If you *MUST* email me, don't LAUGH when
you do so!)
>>>> ==================
>>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>>>> ==================
>>>>
>>>>
>>>> "debushman"
<[email protected]> wrote in message
>>>> news:[email protected]...
>>>> > Does anyone know if Dreamweaver MX 2004
will install and run on the
>>>> > new
>>>> > Windows Vista?
>>>>
>>>>
>>>
>>>
>>
>

Dreamweaver and Windows Vista Problem

Hello,
I ran into a problem with my Dreamweaver - 8 application and
cannot find a fix. I open up the Dreamweaver application, 2-3
seconds later, I get the following error message, “A problem
caused the program to stop working correctly, windows will close
the program and notify you if a solution is available.” I am
using Windows Vista and believe the problem is associated with the
Vista operating system. I am puzzled by the fact that I have been
using Dreamweaver with Vista and have had no problems up until now.
I uninstalled & reinstalled Dreamweaver to no avail. I
restored my computer to an earlier date, and updated Dreamweaver,
and still have the same problem.
Any help to resolve this problem would be greatly
appreciated.
Steve
Text
Text

Hello Again,
I finally fixed the problem. I went into my network settings
and reset my network address. This did the trick, I went back and
opened up Dreamweaver without any problem.
Steve

Installing Adobe Dreamweaver CS5.5 and PhotoShop 5.5 on windows 2008 R2 SP1 using Terminal services

Hi All,
Is it possible to install Adobe Dreamweaver CS5.5 and PhotoShop 5.5 on windows 2008 R2 SP1 using Terminal services. We are planning to use xenapp to publish these application.
Please let me know if this is a supported environment.
Regards
Radhika

As far as I know you will NOT be able to access OpenGL functionality through Terminal Services. as the OpenGL implementation provided in that environment is software, version 1.1 - not GPU-accelerated.
I seem to recall there was a thread about a year ago here where someone was trying to do what you are asking. I vaguely remember they were able to make it work, but I'm not sure. You might try doing a search of this forum.
-Noel

I am retired. In my active years, I purchased Adobe Creative Suite 4 Design Standard and Dreamweaver CS5 for my Windows environment. I recently spent a fortune to migrate to Apple. I realize that my licenses are not recognized by Adobe. I am desperate

I am retired. In my active years, I purchased Adobe Creative Suite 4 Design Standard and Dreamweaver CS5 for my Windows environment. I recently spent a fortune to migrate to Apple. I now (and a bite late) realize that my licenses are not recognized by Adobe. I am desperate. I cannot afford the expense of buying or paying access to the software and, still, I need the tools for all those little things I do for enjoyment. What can be done?

The licenses are operating system specific, so one option would be to retain use of the Windows machine you had before the Mac.
If you want to try to use the older stuff on your new Mac you can try installing Windows emulation software such as Bootcamp.

Dreamweaver CS3 in Vista 64 and Windows 7

I am running Dreamweaver CS3 on Vista 64 and Windows 7 Pro for about 2 months now.
When I go to set up a new Site Definition and select a Local root folder, I find I have to go down an extra directory in order to get Dreamweaver to select the directory I want as root. (example: have to select the image directory).
Windows 7 is out officially now, I wonder if this problem has been fix in CS4, and how CS4 preforms on Windows 7.
I have been hodling off upgrading to CS4 for a year now, since Adobe has not make any statements about Windows 7 support. If adobe has release some statements, can someone point me to the statement?
What is the possible release schedule for CS5, I am thinking May 2010?
David Pearson
www.saludalabs.com

I have been hodling off upgrading to CS4 for a year now, since Adobe has not make any statements about Windows 7 support. If adobe has release some statements, can someone point me to the statement?
http://www.adobe.com/products/creativesuite/faq/ See "Support for Windows 7"
What is the possible release schedule for CS5, I am thinking May 2010?
That's as good as anyone else's guess.
CS: Sep 2003
CS2: April 2005 (19 months)
CS3: April 2007 (24 months)
CS4: Oct 2008 (19 months)
CS5: May 2010 would be 19 months - but only Adobe knows the real date.

Dreamweaver CS3 and Windows 8 Issues

I have Dreamwever CS3 and Windows 8 and I keep getting errors that can only be resolved by closing down DW and losing the work I have processed so far. I happens mostly when I use extentions such as Webassaist Data Bridge. I have visited their forum but they advised me to checkout you trouble shooting service.
Please advise
tonytanner257

Hi,
If Dreamweaver is working fine without the extensions, I am not sure if we should be troubleshooting Dreamweaver. Just to be sure, Windows 8 is not a supported version for Dreamweaver CS3. It could possibly work, but wouldn't have been tested on Windows 8 as Adobe supports only the previous two versions of any software.
This is my best answer. You could wait for other experts for their opinion.
Thanks,
Preran

How to setup ftp with dreamweaver and windows server 2003

Does anyone know if there is a tutorial/article on settinp up Dreamweaver cs3 to use Windows server 2003 as an FTP server...
any assistance would be greatly appreciated...

I was able to figure out how to setup the ftp connection, connect to my home server, however,whenever i tried to upload the contents of my website to my server, nothing gets uploaded to the site. I tried putting one page at a time, nothing. tried everything, and still no joy. I can see everything on my local server which is a XAMP package, but nothing on my remote server. Do i maybe need to maybe have a WAMP or XAMP on the Windows Server 2003 or that should not matter. This is new to me so i am learning as i go along.
Another thing, i was able to create a subfolder in my c:\www.ftproot folder, i can see that folder on my local machine, i'm just not seeing the files in that folder when i do my 'put' with my files.

Dreamweaver and Windows 8

Is Dreamweaver CS6 compatible with Windows 8?

Hi,
Yes it is compatible with Windows 8. You can check the system requirements from the link below.
http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-dreamweaver.html#mai n_Dreamweaver_CS5_5_system_requirements
Thanks
Kapil

Cannot activate Dreamweaver MX 2004 on Windows 7 64 bit pc?

Hello.
Does anybody in here know how to activate Dreamweaver MX 2004 on a Windows 7 64 bit pc?
I keep getting the message that there is an internet connection problem.
I have deactivated my firewall etc., but it doesn't help me.
Anybody got an idea? Adobe Chat does not have the answer for me!
Regards Anders Fj

Wow! Thank you. It Works! Clever!
This is really helpful for those
of us who are nore professionals. I only use Dreamweaver MX 2004 to
maintain and repair my own small homepage with photos. And I know how to
use Dreamweaver MX 2004 and I am not interested in learning new tools -
not now
ONE MORE QUESTION THOUGH: Where and how do I update my
Dreamweaver MX 2004 now that I have installed Dreamweaver MX 2004 on my
new Win 7 64 bit pc?
Regards
Anders Fjeldberg, Denmark
Ken Binney
skrev den 2014-05-04 00:01:
CANNOT ACTIVATE DREAMWEAVER MX 2004 ON
WINDOWS 7 64 BIT PC?
created by Ken Binney in _Dreamweaver
support forum_ - View the full discussion
>

In dreamweaver mx 2004 and dreamweaver cs4, how I configure, when download/upload do not ask me to include DEPENDED FILES but act without including ?

in dreamweaver mx 2004 and dreamweaver cs4, how I configure, when download/upload do not ask me to include DEPENDED FILES but act without including ?

Open the Preferences panel (Edit menu on Windows, Dreamweaver menu on a Mac), and select the Site category. There are two checkboxes there for dependent files. Make sure both are selected. The Dreamweaver default is NOT to upload/download dependent files. You need to click Yes, if you want the dependent files to be included.

Adobe Dreamweaver Cs6 Clash with Windows 8

I am trying to test out Adobe Dreamweaver CS6 for the 6 day trial period on Windows 8. After one use it doesn't want to load again saying that the program unistalled itself (error 16) and I should reinstall. If it does this on the trial, it would after I buy it, do it as well right. Are Adobe dreamweaver and Windows 8 enemies? Must I rather turn to Netfusion?? How do I know the product will work if the trial does not work at all??

See if the following links are helpful. The first is for a help document provided by Adobe and the second is a posting where at the end the user was able to resolve the problem by changing some permissions.
http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html
http://forums.adobe.com/message/4110255#4110255

Um is there a old version of adobe dreamweaver mx 2004 for windows xp professional? can i get a free

um is there a old version of adoobe dreamweaver mx 2004 for windows xp professional? i have an old version of adobe photoshop(which is adobe photoshop cs(8.0) and adobe image ready which was activated by my father, which i dont know the activation code for it but any way is there a way to get a serial code for it?(dreamweaver mx 2004)
Message was edited by: japal3

Yes. The Activation codes can be found in a table near the bottom of this link:
http://helpx.adobe.com/x-productkb/policy-pricing/macromedia-legacy-activation-error.html
Nancy O.

I orginally bought Dreamweaver CS5.5, and I later upgraded to CS6.

I orginally bought Dreamweaver CS5.5, and I later upgraded to CS6 by downloading and entering the product code. Recently I had to reinstall Windows so I no longer have CS6. Is there some way of getting it back? I have the product key.
Second, this is the fourth time I have entered this message on pages leading up to this one. Is there any way of just entering the question once?

Hello,
did you find this: http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html and please note "Important: Download the files from a browser other than Microsoft Internet Explorer."
What concerns your question about "Second": Provided I understand you in the right way, naturally it is. BUT, when you don't get an answer it means nothing more and nothing less than no one had a solution for you. And please don't forget, here the most are users not Adobe's employees.
Hans-Günter

Problems in Dreamweaver with cut-and-paste

Hi there.
I wondered if someone could help with a small problem within
Dreamweaver CS4. If I have two different CSS style sheets open, and
I highlight a certain section of one CSS stylesheet to take the
rule to another CSS stylesheet, for some unknown reason as soon as
I do "copy" the whole of the stylesheet is highlighted, the only
way I can stop this from happening is to double-click on the "code"
button at the top left-hand side of the Dreamweaver window. Is
there any other way to stop this from happening. I am running
Dreamweaver CS4 on the windows Vista platform.
Thank you for reading this post and for any help you may be
able to give.
Regards, John.

Hoorah!
At last - someone else with the same problem!
I have been leaving messages on here for ages to try to get some response from Adobe. Someone kindly suggested getting rid of the preferences folder, but that didn't solve the problem.
I think its something wrong with Dreamweaver CS4. I have reverted back to CS3 until they come up with an upgrade!
Out of interest does this happen straight away or after a period of time? I found if you quit Dreamweaver and restart it usually its ok for a while.
Do you also have the same problem editing the code? I find I can't put the cursor anywhere WITHIN a chunk of PHP. The cursor highlights the whole lot. I have to click all over the place until it eventually works as normal - or I have to quit Dreamweaver and start again.
Are you using a Mac too?
Regards
Colin

Dreamweaver MX 6 and Windows 7.

Similar Messages

Maybe you are looking for