Dreamweaver not creating paragraph tags upon return

All of a sudden my Dreamweaver is not creating a new paragraph when the enter (return) key is pushed. It has always done so in the past. Any ideas on what might cause this?
Thanks

The screen shots are in the order before, after, and the DW rendering of the after.

Similar Messages

Dreamweaver not creating a directory within my site

When creating a spry asset (in this case a menu bar) it doesn't automatically set up a 'SpryAssets' folder within my root folder. I have gone to manage sites>edit>advanced settings and put in the desired location of the folder; however it doesn't create the spry folder within when i create a spry asset.

Ddi you save the file before and after inserting the spry menubar?

Could not create an environment: OCIEnvCreate returned -1.

I get the aforementioned error on my office machine, but everything works fine on my laptop. From my search on the internet I gathered that it is usually due to limited access permissions granted to aspnet on the oci.dll. I tried everything to remedy security related issues from granting the aspnet full access to oracle directory...to impersonating...to even copying the machine.config and security.config from my laptop to office machine. Nothing works for me...
Please help and suggest other issues that may be causing this error.
Thanks in advance. Any help is much appreciated.
Krems

Hi,
I too encountered this issue a couple of times and am not impressed by the lack of "solutions" out there on-line.
Many people have advised that this is a permissions error - the user performing the connection needs read/execute permissions to the Oracle software folders.
In the case of .Net, this means the local "ASPNET" user.
I applied read/execute permissions for this user to my Oracle software directory, and this automatically applied recursively down the directory tree, however, I still had an issue. It turned out that one part of the directory tree didn't inherit the new permissions, so I had to be much more thorough at applying the security change.
Now 100% of the Oracle directories have full access permissions for my ASPNET user and my .NET application can finally connect to the Oracle DB. Full access might be overkill, but I was stressed, so go figure :)
Hope this helps.
Graham.

Stop dream weaver from adding paragraph taga

Is this a setting or somthing? The new dreamweaver seems to
add paragraph tags when every I add images or start a text.
the paragraph tag adds space and thus changes alignment on
text and images that are viewable on all browsers except Internet
Explore for the PC. Many people use different browsers and
platforms. So a little upset that this is autamatically being added
in the new dreamweaver.
This is caused me much work becuase I have to always go
though sites and manually take them out.
Is there a fix for this?

If you insert an image on a new page, DW will not wrap it in
<p>, even
though it's illegal to have this structure -
<body>
<img>
</body>
But, if you then press enter, DW will wrap the image to give
this -
<body>
<p><img></p>
<p> </p>
</body>
in anticipation of a new paragraph of content.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"P@tty Ayers" <[email protected]>
wrote in message
news:e2arao$ppe$[email protected]..
> Dreamweaver does not add paragraph tags when you add
images, or even when
> you type text. You're probably hitting the Enter button
on your keyboard,
> which is set up by default in DW as a shortcut for
adding <p> tags.
>
>
> --
> Patty Ayers | www.WebDevBiz.com
> Free Articles on the Business of Web Development
> Web Design Contract, Estimate Request Form, Estimate
Worksheet
> --
>
>
>
> "Pixel Pusher" <[email protected]>
wrote in message
> news:e2aq8u$od0$[email protected]..
>> Is this a setting or somthing? The new dreamweaver
seems to add
>> paragraph tags
>> when every I add images or start a text.
>>
>> the paragraph tag adds space and thus changes
alignment on text and
>> images
>> that are viewable on all browsers except Internet
Explore for the PC.
>> Many
>> people use different browsers and platforms. So a
little upset that this
>> is
>> autamatically being added in the new dreamweaver.
>>
>> This is caused me much work becuase I have to always
go though sites and
>> manually take them out.
>>
>> Is there a fix for this?
>>
>
>

Table headings (tagged in paragraph tags) to be merged as a single entry in the TOC

Hello,
I am working on a previous file done by somebody else. And here, I have the TOC as shown in screen shot below (which looks quiet normal).
- The body page headings are placed in tables as shown in screen shot below.
But, the entries when they appear in the TOC, they appear as one (IP31/42 T40) heading.
How do we tag table headings (in different paragraph tags) and merge them as a single entry in the TOC.
Also, suprising to note the paragraph tags are different in the TOC and different in the body (for the same headings).
Below are the different paragraph tags that show up for the headings in the Table of contents:
Below are the different paragraph tags that show up for the headings in the Table of contents:
How do we tag table headings (in different paragraph tags) and merge them as a single entry in the TOC.
Help much needed!!
Please advice....
Regards,

You cannot have two paragraph styles in one paragraph, but you could use different styles in each cell of your table and include them all in the TOC.
As far as using a different paragraph style for the lisitng in the TOC and the actual text that is picked up, that's very common. It allows you to find many different paragraph styles to include, but have the listings all look the same, and completley different from how the text looks in the body of the book. You'd problay not want 24 pt Bold TOC lisitngs, but that might be appropraite for section headings that you want to pick up.

HTMLDataSet paragraph tag in header not allowed?

Anything I am doing wrong?
Spry’s HTMLDataSet (SpryHTMLDataSet.js - version 0.25 - Spry Pre-Release 1.6.1) doesn't seem to give the data in any column in which the header is enclosed within a paragraph tag.
Snippets demonstrating this are below. The first column of data does not display. Take out the <p></p> from the 1st column and all works as expected.
Strangely, the data may be enclosed without effect.
As a new user of CS5 and DW, I encountered this while going through the CS5 CW Classroom in a Book sample in chapter 14. Had to spend of bit of time narrowing down the source of the original problem, which was that only the headers display in Live View or IE. My apologies if this something most people already know.
<script src="SpryAssets/SpryData.js" type="text/javascript"></script>
<script src="SpryAssets/SpryHTMLDataSet.js" type="text/javascript"></script>
<script type="text/javascript">
var ds1 = new Spry.Data.HTMLDataSet("MySimpTbl.html", "SimpTbl");
</script>
</head>
<body>
<h1> My Temp Page Test </h1>
<div spry:region="ds1">
<table>
    <tr>
      <th spry:sort="HC1">HC1</th>
      <th spry:sort="HC2">HC2</th>
      <th spry:sort="HC3">HC3</th>
      <th spry:sort="HC4">HC4</th>
    </tr>
    <tr spry:repeat="ds1">
      <td>{HC1}</td>
      <td>{HC2}</td>
      <td>{HC3}</td>
      <td>{HC4}</td>
    </tr>
</table>
</div>
<p> end of page </p>
</body>
Within MySimplTbl.html:
<body>
<table id="SimpTbl">
<caption>
    Simple Table
</caption>
<tr>
              <th><p>HC1</p></th>
    <th>HC2</th>
    <th>HC3</th>
    <th>HC4</th>
<tr>
    <td>r1c1</td>
    <td>r1c2</td>
    <td>r1c3</td>
    <td>r1c4</td>
</tr>
<tr>
    <td>r2c1</td>
    <td>r2c2</td>
    <td>r2c3</td>
    <td>r2c4</td>
</tr>
<tr>
    <td>r3c1</td>
    <td>r3c2</td>
    <td>r3c3</td>
    <td>r3c4</td>
</tr>
</table>
</body>

Thanks for your reply.
Re:
In the same way I am confused why you should want to use a p-element for a heading.
Excellent question. I'm all for the - if it hurts, don't do it without good reason - philosophy. The authors of the book I am using to learn Dreamweaver, "Adobe Dreamweaver CS5 Classroom in a Book", had the p-elements in their lesson 14 file for learning HTMLDataSet use. I couldn't tell you why they chose to have p-elements in the headers. The rest of the book, which has versions for CS3 and CS4, has been without significant flaw. So as a newbie, I assumed I might have the incorrect .js or done something wrong.
Lacking vision of a positive return on effort required to pursure this further, I'll mark this question as answered and benignly assume that an undocumented and unsupported feature of supporting p-elements in the headers of previous versions of the HTMLDataSet has been removed.

Return key not creating a new line when using the horizontal text tool

Going through the adobe after effects 'classroom in a book' examples - when writing a line of single line using the horizontal text tool pressing return does not create the next line underneath, the cursor stays on the same line?
Anybody out there had this problem?

Hi Bill
Thanks for replying!
My OS is windows 7. I think it is the first time I have needed to put more than one line of text in an after effects layer. I am new to CS5.5 - after effects and I'm going through an adobe tutorial 'classroom in a book' series book.
I thought about using a paragraph text box as you suggest but could not find the function in the tools menu.
I have since tried clearing the cache out and restoring default layout but with no joy.
I have used the return key for multiple line text in premier pro and it works perfectly ok.
Cheers,
Alan

Paragraph tag not included in catalog.

fm11 in win7.
In the document I'm working on, some lines appear to be in a paragraph tag named "RegName". But this "RegName" can not be found in the catalog, ie if I click on the arrow to select the paragrah tag, "Regname" is not included.
Thanks for your help.
Stephane.

> But I'm just wondering how this Paragraph tag could be referenced in the document while it was not in the catalog?
Paragraphs with new tags are not automatically added to the Catalog. It's an option when creating one. When pasting in text from another FM document, new tags are not automatically cataloged. For a tag one already in the catalog, doing a Delete Format on it only removes it from the cat. Text containing it is still present and still tagged with the deleted format.
There actually is a command (dialog sequence) that causes every format in use to get added to the cat (and the details of which I don't recall at the moment). Instances of existing catalog formats with overrides get cat entries with new names. Massive catalog pollution results, but it's great if the intent is to clean up overrides and weed out (or adopt) rogues.

Could not create the flash button because a component of Dreamweaver is missing. Please reinstall Dreamweaver.

I have Dreamweaver MX 2004 and then upgraded to
Dreamweaver Studio MX 2004 and decided to upgrade to Studio 8. At
the time I got the Studio 8 I also upgraded my computer and now my
purchased flash buttons do not work on my system. I get an error
message Macromedia Dreamweaver Could not create the flash button
because a component of Dreamweaver is missing. Please reinstall
Dreamweaver. We tried uninstall and then reinstall and still no
fix. My husband tried the software on his lap top and they work
fine. I did have Contribute installed but uninstalled it . 1. What
would the missing component be? and 2. Why didn't the reinstall
work? Thanks for the help. I need to update a couple of sites that
use the buttons and can't so far. Carol

you probably have to install the Dreamweaver update so that
you're on
version 8.0.2. just search Adobe.com for Dreamweaver update
and you
should be able to find it pretty quickly.
cpt_vom wrote:
> After a reinstall of Window XP and Drewamweaver ver.8
I'm running into a
> problem.
> When inserting a flash button I get the following
message:
> :Could not create the Flash Button because a Component
of Dreamweaver is
> missing. Please reinstall Dreamweaver:
> Not a word about which Componement missing!
> I have tried to instal Dreamweaver several times but
without result - same
> message appears.
> The button in question is 'FZ Pack 3: Multi Buttons'.
> I can insert the standard buttons with no problems and I
have also tried to
> insert this button on my second PC with succes which
could indicate a problem
> with my main PC, maybe something to do to Windows XP?
> I really would appreciate an solution to this problem
and hope somebody could
> help.
>
> Kind regards,
> Kjeld - Copenhagen - Denmark
>
>

Using Dreamweaver to create AIR app from HTML site, FLV loaded by placed SWF not loading

Hello.
I'm using Dreamweaver to create an HTML-based site that has pages with FLV-based videos that are loaded using a SWF file. The SWF file is just the player / skin. When I preview or publish to AIR, the videos do not show up. I'm sure others have asked how to accomplish this but I'm having difficulty finding the solution to this issue. Can someone share with them their solution please?
Thank you!
Robert

Steveejay, I was having the same problem. It turns out that
mine didn't like the fact that I was using the "POST" method in my
loadMovie() call. I changed them to "GET", and it works fine in the
web page now. Just doesn't work when previewing in Flash.

Some paragraph tags are not printing when document is printed from Framemaker 10.

So this is really odd. I have a situation where I have a document that I am developing in Framemaker 10 several different paragraph tags are intermittently not printing when the document is physically printed. When I go to print the document from Framemaker 10 to a physical piece of paper some tags are printing partially or not at all. What makes this stranger to me is that when I print the document to a PDF, all of the content and tags show up in the PDF. Then when I try to physically print from the PDF, the tags do no print from that document as well.
Typically the tags that are not printing are those that have been bolded, but are across several different tags. Also the problem is sometimes only to the first line of a tag, where if the tag carries over to a second line in the document, the text on the second line prints. Another quirky instance that shows up is where the text a line will print only parts of the text. The document uses the same type font for the entire document, Helvetica 55 Roman. The font size varies and the coloring varies as well, but this issue is happening for all sizes and colors.
I'm not sure what additional information is important here, but if you need additional information please request it and I will supply it to the best of my ability. I'm a content developer with an intermediate amount of experience with Framemaker.

I'm not sure if this is the same problem, and you didn't mention your
OS, but there was a widespread problem with dropped text in PDF with
Windows XP. A hotfix was issued to fix it. If on Windows XP, you should
install it:
http://blogs.adobe.com/techcomm/2008/07/hotfix_for_framemaker_1.html
Also, you mentioned that it was "bolded" text that tended to have the
problem. Bolded text is artificially bold and does not use actual bold
fonts. (If I recall, text is double printed at a slight offset to give
the appearance of a bold font.) So there is no bold font to embed. Be
sure you install and use an actual bold font, rather than using the
bolded characteristic, or you could see problems.
This is a stretch, but you also mentioned that some of the problem
sections have colored text. Check the printer properties of your Adobe
PDF virtual printer to make sure someone didn't reassign the driver (on
the Advanced tab). It should be set to use the Adobe PDF Converter
driver (or Acrobat Distiller in older Acrobat versions). Years ago,
people sometimes changed this setting to use other drivers for various
reasons, not realizing that they limited themselves to the capabilities
of that driver. So, if they chose an HP LaserJet PostScript driver, for
example, their documents might no longer be able to be 11"x17" or
color-- because the printer couldn't handle it. The driver was limited
to 8.5"x14" and black-and-white. Perhaps there is a driver set that is
choking on the colored text-- though I would think it would merely
convert it to B&W.
Okay, I've grasped at enough straws.

FrameMaker Paragraph tags not consistently mapping in RoboHelp

Hello, I have a FrameMaker book, which i have linked to a RoboHelp project. I successfully mapped all the paragraph tags from FM to RH. However, when i compile my help some of my headings do not appear correctly. For example, my Heading 1s have a different appearance from topic to topic. I looked at my FM source files and there are no paragraph or character overrides on any of the affected headings. When I open the topic in RH, i can see that the paragraph symbol at the end of the heading is the correct size, but the text itself is smaller than it should be. I discovered a way to fix this, but it is VERY time consuming. (i.e. In FM, highlight each heading, reapply the paragraph tag, apply the default font character tag) This fix is not a viable option since i have thousands of topics. Any suggestions?

Apparently RH also ignores FM styles that only appear in
tables. Weird. If I add text using the parapgraph styles into the
body of the FM file, the styles are imported by RH (I had to add
text to the pgf for RH to see it). But if the style is not used in
FM anywhere but a table, RH ignores it.
Another show-stopper: Rows in tables are ignored by RH if
multiple conditional tags are applied to the row. For example, a
row is conditionalized with "A' & 'B' and you import the FM
file applying the 'B' condition, the row will not show up in the
table. If the row is only tagged 'B', it will show up. Other
straddled rows that are tagged with a condtion other than the one
used to import into RH will cause misaligned columns in the
table.

Any TextFrame Created on Server will not show as tagged on desktop

Hi All,
related to an eariler post - if I create "any" text frame on InDesign Server, it will not show as tagged when opened in desktop.
I run the following code on InDesign Server CS3:
var doc = app.documents.add();
var frame = doc.pages.item(0).textFrames.add();
//..set geometry...save document...
When I then open the document in desktop and tag the frame, it all works functionally but the frame will not display as tagged ("ie View..Structure..Show Tagged Frames").
If I add a new frame to the same document (via UI) and tag it - it all works fine.
If I copy the server generated frame - it will still not display as tagged.
Strange, and very annoying! Has anyone else come across this issue.
Can anyone else replicate it for me so I know I'm not mad or have some dodgy install?
Cheers, Scott

Scott,
I see the same problem, so no, you aren't crazy. I tried running the same javascript from within InDesign, but that text frame draws correctly. So, it doesn't look like it is a scripting problem, but a problem unique to InDesign Server.
Susan Doan

Paragraph tags not applied correctly

Hi,
I’m importing an FM document into RH (Technical
Communication Suite). I fixed all the paragraph definitions and the
mappings.
After importing, the same paragraph tags are sometimes
applied correctly and sometimes not. Most problematic are the ones
that come right after a paragraph that has a bullet or number
setting. It seems as though the following paragraph sometimes has a
bullet or number even though you can’t see it.
If I reapply the paragraph tag it doesn’t help, but if
I apply a different one and then the original one I wanted –
it works OK.
Is there a workaround? Am I doing something wrong?
Thanks,
Rakefet

Have you updated lately? I applied RoboHelp patch 7.0.2 and
it fixed may random isses that I was having. Also I would recommend
mapping all numbered and bulleted lists to Normal to have them
appear correctly. Also don't forget to check Convert AutoNumber to
HTML list on the Style Setting window.
Amanda

Dreamweaver CS3 creates "_notes" directories. I don't want the "_notes" directories. How do I configure DW CS3 to not create those directories?

Dreamweaver CS3 creates "_notes" directories. I don't want the "_notes" directories. How do I configure DW CS3 to not create those directories?

No, it makes no difference to Run-time styling.
A design-time stylesheet is a stylesheet that is only applied to the page as you are working in DW. This is very handy if you have elements on the page which are normally hidden/visible and you want to toggle that visibility while in Design view. Or when you have content that is styled in a way that DW doesn't understand, but the browsers do - you can use a DT stylesheet to modify this styling in Design view only. I'll give you an example -
There is a metric that is used for font sizing called "rem". A rem is a relative em value - in other words, it specifies the ratio between the actual character size and the size of a base definition for the character size on the page. In previous versions of DW, this metric was not supported. So text content was abnormally large as a result when looking at a page using Design view. A DT stylesheet solves that problem by redefining the character size in px, but only when I am working in DW. Here's a good explanation (http://www.css-tricks.com/rems-ems/)
You also will lose (I believe) details about which files have been recently synched, and some of your local settings for guides and snap to guides.

Dreamweaver not creating paragraph tags upon return

Similar Messages

Maybe you are looking for