Dreamweaver not recognizing swf files

hello all.i am a new flash and dreamweaver user and i have
run into a bit of a problem.i am trying to export a website i
developed in flash into dreamweaver to put on the web.after
learning how to do this,i attempted to import the swf from flash
into dreamweaver but it wont recognize it.like in dream weaver i go
to insert>media>flash,it goes to the folder i have saved the
swf in,but it doesn't show up....HELP!!!!

OK - don't tell anyone.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Gary" <[email protected]> wrote in message
news:gaoooo$np$[email protected]..
>I thought the monkeybutt folder was our little secret...
>
>
> "Murray *ACE*" <[email protected]>
wrote in message
> news:gaooli$gp$[email protected]..
>> As long as your link to it is correct, it could be
in the monkeybutt
>> folder of your local site.... 8)
>>
>> --
>> Murray --- ICQ 71997575
>> Adobe Community Expert
>> (If you *MUST* email me, don't LAUGH when you do
so!)
>> ==================
>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>> ==================
>>
>>
>> "Gary" <[email protected]> wrote in message
>> news:gaong1$sd5$[email protected]..
>>> Would it not be better to just export the movie
from Flash to the root
>>> or image folder and upload from there?
>>>
>>> gary
>>>
>>> "Gary White" <[email protected]>
wrote in message
>>>
news:[email protected]..
>>>> On Tue, 16 Sep 2008 15:39:41 +0000 (UTC),
"0Fox"
>>>> <[email protected]> wrote:
>>>>
>>>>>hello all.i am a new flash and
dreamweaver user and i have run into a
>>>>>bit of a
>>>>>problem.i am trying to export a website i
developed in flash into
>>>>>dreamweaver
>>>>>to put on the web.after learning how to
do this,i attempted to import
>>>>>the swf
>>>>>from flash into dreamweaver but it wont
recognize it.like in dream
>>>>>weaver i go
>>>>>to insert>media>flash,it goes to
the folder i have saved the swf in,but
>>>>>it
>>>>>doesn't show up....HELP!!!!
>>>>
>>>> Import is the wrong word. Instead of
File->Import, you want
>>>> Insert->Media->Flash.
>>>>
>>>> Gary
>>>
>>>
>>
>
>

Similar Messages

Is there anything I can do in dreamweaver so my swf file always fills the whole browser screen?

Hi
I am deploying my flash swf in dreamweaver, however i have a
problem my image is not fillng the whole of my browser screen
idealy 1000 x 600 and I am getting horible white borders around my
artwork.
I have
A used the properties settings in flash and sett my both my
stages to 1000 x 600 including my preloader
which the main swf loads into
B used the publish settings to match my document setting in
percent so they align in the middle of the page
Is there anything I can do in dreamweaver so my swf file
always fills the whole browser screen?
thanks
matt

> I am deploying my flash swf in dreamweaver, however i
have a problem my
> image
> is not fillng the whole of my browser screen idealy 1000
x 600 and I am
> getting
> horible white borders around my artwork.
A flash file is proportional, and a web browser viewport
isn't necessarily
proportional.
So, unless you are forcing a persons web browser to a set
size (and I'd
STRONGLY not recommend doing that...ESPECIALLY at the size
you want) then
you'll need to confine your actual SWF file to a specific
size on the page
itself.
> A used the properties settings in flash and sett my both
my stages to 1000
> x
> 600 including my preloader
> which the main swf loads into
The stage in Flash is not what tells the web browser what
size to set the
SWF on the HTML page itself. That's done in the HTML when you
'publish/export' your SWF file from flash using the HTML tab.
> Is there anything I can do in dreamweaver so my swf file
always fills the
> whole browser screen?
Well, you set the width and height to 100%, but that will
distort your SWF
file if people change the aspect ration of their browser from
that of the
SWF file.
-Darrel

When I plug my ipod touch into my PC, it is not recognized in file explorer

When I plug my ipod touch into my pc, it is not recognized in file explorer

It does (should) show up in Explorer on a PC. On a Mac it does not show up in Finder
Try:
iOS: Unable to import photos to computer
Have you installed any camera or scanning software?
If you have a camera, does the camera show when you connect to computer?

Lightroom 4.4 not recognizing RAW files from supported cameras

I started to get problems with Lightroom not recognizing RAW files from my Fuji XE-1 and Canon 5D Mark 3 cameras but I thought it was a problem with RC. After downloading some files today in 4.4 without a problem I encountered the same error message (unable to inport listed RAW files) again. The files open fine in Bridge. Any idea what is causing this problem?

Hi Geoff
I use a Mac with the latest version of Mountain Lion OS. The image files are being imported from the cards; in the case of the Fuji an SD card inserted in the card reader slot on the Mac and in the case of the Canon a CF flash card in a card reader attached to the Mac.
Appreciate any help you can provide.

My windows 7 machine does not recognise .swf files. I have down loaded the flash player but I think.

My windows 7 machine does not recognise .swf files. I have down loaded the flash player but I think but it is linked as a plug in with chrome and IE. How can I get my windows to recognise the .swf files to play them.

The downloaded file is the projector, not an installer; you need to make the file association manually:
move the downloaded exe file to a location you can remember, e.g. C:\Windows\SysWOW64\Macromed\Flash
right-click on a swf file and select Open with > Choose default program
navigate to the folder you saved the player and select flashplayer_13_sa.exe

After effects cs6 will not import swf files...

after effects cs6 will not import swf files...keeps saying it's unsupported. why would this be? what do i need to change?

What SWF file? What source? How was it generated? SWF generated by Flex/ Flash Server may contain constructs that are incompatible and SWFs that render all their elements dynamically using Flash drawing primitives and use lots of ActionScript may also not work...
Mylenium

Iphoto 11 is not recognizing jpeg files downloaded from camera and card reader. Nor will it allow me to transfer from image capture

iphoto 11 is not recognizing jpeg files from either the camera and card reader. Canon Eos rebel dig. Nor will it allow me to transfer images from image capture to iphoto. No problem downloading to image capture.

Sounds like a damaged card. Get your photos off the card with Image Capture and then reformat the card in the camera. Take some pictures and see if the card is recognized by iPhoto and the card reader.
OT

PS CS3 not recognizing Raw Files and converters Ive downloaded not working..Why not?

PS CS3 not recognizing Raw Files and converters Ive downloaded not working..Why not?

Do you seriously think we can answer that with zero information from you?
Please give us:
Operating System/version
Photoshop version number
Amount of RAM installed
Hard drive(s) free capacity
Video card make and model
Camera make and model
Then describe what you have done so far and the symptoms you are seeing.

IE not opening swf file but it is opening at mozzila as weel as netscape

Hi All,
IE not opening swf file but it is opening at mozzila as weel
as netscape
see following link at netscape & IE and mozilla too
http://ugmumlmri40/mrIWeb/mrIWeb.dll?I.Project=DIMENSIONFLASH&i.test=1
Thanks,
Ganesh

that's a strange looking url.

HELP DREAMWEAVER CS4 NOT SHOWING SWF FILES

I have a presentation in 2 days in Tokyo. And I'm panicking.
I'm on am Intel Mac OS X 10.4.11.
I have the latest version of Flash Player 10 installed. (Not the brand new beta version).
I created a great website in Dreamweaver MX a few years ago.
I never had ANY issues with .swf files displaying until using Dreamweaver CS4.
I updated my photography portfolios in Adobe Bridge, and used Dreamweaver CS4 to link the updates.
NOTHING MORE THAN THAT!
Then, NONE of the .swf files that were always viewable are showing.
There is absolutely NO Flash content showing on any page of the site now.
Not even in browser view in Safari, or Firefox.
I uploaded the files along with the newly created SCRIPTS folder to my server, and still no .swf files are viewable.
These are NOT FLV files they are .swf files that were imbedded properly, and were always viewable. Until now.
I have to go to Tokyo in two days and give a presentation of this site.
What is the problem?
The attached files show the view in Dreamweaver CS4. The view in Safari, and the view in Firefox.
I'm screwed for a desperately needed job in Tokyo if I can't get this fixed ASAP.
Please help.

i think you are on to something here. but i am not sure how to go about fixing this.
are you saying the "../s
should be replaced with "S
where is this code located? in the source code of each page that has the swf files? i should replace it with the correct version you copy and pasted? and that should resolve the problem?
big thanks if this is the issue.
<script src="../scripts/AC_RunActiveContent.js" type="text/javascript"></script>
The correct link to that file would be this -
<script src="Scripts/AC_RunActiveContent.js" type="text/javascript"></script>
Note the "S" in place of the "s". *nix servers are case sensitive.

Can't get dreamweaver to open swf files.

Hello,
I am new to dreamweaver and I am having a major problem in
trying to edit an existing website. My website was done with flash
files swf. and when in the local directory I click on the file I
get an error message "Can't find a valid editor for this file".
What am doing wrong? Please help.
Thanks
Nixon

> So what and how do I edit a file that was done in flash?
You would have to have two things -
1. The parent *.FLA file that was used to create your *.swf
file
2. Flash (the application, not the reader plugin)
I'm afraid you are holding a very short stick. All Flash
websites are not
the way to go unless you are Nike or Victoria's Secret.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Starstruck13" <[email protected]> wrote in
message
news:g6hra1$s0t$[email protected]..
> Murray,
> Thanks for the response. Now understand why I couldn't
edit the file. So
> what
> and how do I edit a file that was done in flash? DW
directs me to my
> browser
> list for the flash component. I am certain I have flash
but not sure of
> which
> to select. Also, once the flash file is open in code, I
don't see the
> text I
> would like to edit just the codes. What links do I need
and or missing?
> Thanks
> Nixon
>

11.1.2 essbase upgrade not recognizing application files location

Hi all
I am upgrading an essbase database (Planning) from 11.1.1.3 to 11.1.2.2,
I trying to configure 2 essbase servers (original 11.1.1.3 and new 11.1.2) running on 1 physical server using different ports and filesystems
Following all the steps in the Deployment guide in Preparing Essbase Data for Upgrading,
I ran all the steps in the Manual file transfer instructions to copy from source machine to target machine.
I have started the steps in rehosting the essbase applications,
- Completed enable lookup by cluster name:
- I completed the server to cluster script on the HSS box (updateEssbaseServer )
when i went to run EssbaseUpdateEssbaseServer one of the planning databases did not update i got this error
[Mon May 21 14:03:50 2012]cphypd.sherwin.com///admin/Error(1002097)
Unable to load database [PlanFcst]
Error loading application = 1002097, continue...
looking in the logs i found that it was trying to go to the prior location of the 11.1.1.3 instance and not the new location of the 11.1.2 instance
Why is it not recognizing the new datafile locations

I saw this in the guide
I followed these instructions and specified a different directory when running the staging tool, the script was empty, i do not believe it should be, it should contain mapping info to update essbase.sec, which it did not
On the Configure Essbase Server page, for Full path to application location (ARBORPATH), specify the location of the existing or replicated Essbase data.
Note:
If you replicated data to a new machine, and if you selected Differently-named disk volumes, table spaces, or ARBORPATH on source and target or Consolidated disk volumes or tablespaces on target by exporting data during data replication, you must run a script immediately after configuring Essbase to update the Essbase security file to reflect the disk volumes on the upgraded system. The Essbase Staging Tool provides a script to update the settings in the security file (essbase.sec):
Start the Essbase Server and EPM System services. Navigate to ARBORPATH/app on the machine that is hosting the upgraded Essbase Server and run the following script using MaxL:
%ARBORPATH%/bin/startMaxl.bat -u userName editagtsec.msh
where userName is the Administrator user name to connect to the upgraded Essbase server. The script prompts you to enter the password.
Note:
editagtsec.msh could be empty in some scenarios. For example, when you launched the Staging Tool, the Staging Tool reports on existing volumes. If no volumes are listed, editagtsec.msh is empty.

IPod classic - iPod and iTunes is not recognizing music files

Here's the problem I am having:
iPod is saying there is "no music" on the iPod. Yet, when you view the settings and files it shows there to be 70GB worth of data - that is how much music I have. iTunes is also not recognizing iPod either. I also get an error stating:
"iTunes cannot read the contents of __ iPod. Go to the summary tab in iPod preferences and click RESTORE to restore this iPod to it's factory settings". It's also not reading anything from the Music database.
This is the 2nd time I've had this error in the past two months. It happened in August - I noticed it had happened as I disconnected my iPod from my computer. The first time was when I tried to eject from iTunes. It said the files were currently in use by another program (I had nothing running, what program?), so I "safely removed" as I would a USB device. The 2nd time happened similarly, though not before iTunes locked up totally and would not let me eject from there. The last time I had this problem, I also removed each file/folder manually from iPod control, to hard drive, and restored iPod, and put them back on iPod. However, this time I am not so fortunate as it gives me an error when I attempt to copy stating either the "parameter is incorrect", or "cyclic redundancy error". Some of these files that are giving me this error at some point during the process have been accessible and working fine, and other times they are not, as I successfully copied five folders worth of data without error, then after I started getting errors with the next folders, attempted to copy one of the same folders into a different directory, which THEN gave me an error. I'm not sure what's going on here, but this is proving to be quite the pain and never experienced these problems with my 60GB iPod, which I did not take nearly as good of care as I have this one - and is still working with all of my original music on it.
My question is how do I solve any of these errors, and what would be the best course of action to take? I have a 160 GB Classic iPod. Warranty expired (probably) September, and purchased from Circuit City.
*I DO NOT wish to "Restore" unless absolutely necessary as I have 18,000 songs on my iPod. Restoring this would be cumbersome, and I keep my music on my iPod as I do NOT have the hard drive space to store it with*
Please help!
-dgo

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

DNG not recognizing NEF files

.I have Photoshop CS5 and I recently downloaded Adobe DNG Converter 7.1 to convert my NEF files so that I can open them in Camera RAW which was working for about a week, now it is not recognizing them. Any suggestions as to why?

I don't think you want to use the DNG converter on existing DNG files. You would want to use it on your original NEF files taken by your camera.
In the DNG converter, notice that the prompt is asking for the FOLDER that contains the raw files. Choose the folder, but don't double click on the folder. Don't expect to see your raw files listed. Just choose the FOLDER, and don't try to go any deeper. If you want to convert individual NEF files, drag/drop them onto the DNG converter icon. The program will open and will convert that one file.
Once you have chosen the folder containing your raw files, click on the convert button, and you will see each file listed as it is being converted.

Photoshop not recognizing PSD files

My PSD files are not being recognized. When I go to Properties and then Open With, and browse to the Photoshop application as usual, I am unable to select Photoshop as the program to open my file. I am completely baffled.
It looks like the Open With function is not recognizing PhotoShop, and I do not know if this is a Photoshop error or a Windows error.
Other Adobe programs are working and are recognized just fine. I am using Windows 7 and Photoshop CS4. I am running up-to-date Norton 360 so it is extremnely unliklely to be a virus.
Help please!

Sounds like a basic system problem, not a problem with Photoshop per se...
First, Photoshop should have installed itself so that it would automatically be in the list of programs available to open that file type.
Second, if it's not there by default, browsing to the Photoshop.exe file should make it work as you expect.
I've just opened a file from my desktop using Right Click, then Open With, and choosing Photoshop.exe as you have described. However, in my case Photoshop is already in the list of Recommended Programs.
Out of curiosity, do you see it in the list of "Other Programs" toward the bottom of the Open With dialog? You'll have to click on the little arrow to the right to see them.
-Noel

Dreamweaver not recognizing swf files

Similar Messages

Maybe you are looking for