Dreamweaver over Linux

Why Not? Dreamvweaver Over Linux Platform

"vicentehe" <[email protected]> wrote in
message
news:fj49gr$ngc$[email protected]..
> Why Not? Linux Over Linux Platform
Dreamweaver MX and 8 are supposed to run on linux with
Crossover
http://www.codeweavers.com/compatibility/search?name=Dreamweaver&search=app

Similar Messages

Why choose Solaris 10 over Linux?

Hey everyone -
I was wondering if any of you would mind telling me what advantages Solaris 10 holds over Linux?
I'm not well informed on their pros/cons and would love to hear the perspectives of some gurus.
Thanks, I appreciate the insight!

I am actually in the process of trying to answer this question for an upcoming project I am involved with. I have worked heavily with both Linux (SLES10, RHEL specifically) and also with Solaris 7,8,9, and 10 over the past several years. Honestly, I can argue on either side but I am trying to find compelling answers to bring to the management table. This may be like the search for WMD's but I think I have some answers and I continue to find myself leaning towards Solaris as I have in the past. One of the biggest reasons I chose Linux in the past was the ability to run on X86. That no longer is an issue. The many advantages of Solaris are for sure Dtrace which I have found extremely useful. Also one thing i'm finding is that support has become cheaper through sun than it is through Novell. One other thing is hardware. I have several Sun hosts that have been around longer than I have and continue to run while it seems I'm getting 4-5 years or less out of my other servers(Dell). Linux has gotten 10 times better since 2.4 and even better with 2.6 but with Dtrace, Containers and ZFS, I'm partial to Solaris. Also, ACL's are good in Solaris. I've never used them in Linux so I cannot comment.
If I'm off base on anything let me know and please add anything else.

Versions for Oracle installation over Linux

We are working for a project in the university, and basically we want to install Oracle over Linux, and develop some web applications. Before we start this project, I would like to learn which Oracle(8i or 9i) and Linux (Red Hat or Mandrake) versions would work fine and perfectly together. Since this project will be time consuming, I would rather take a right decision before we get into details.
I would be glad if anybody share that kind of experience,
Thanks in advance,
Ocal Yilmaz
California State University, Chico
MBA Program

8.1.7 on RedHat 7.1 =>Thought we were using older version that would work better...
Wrong... 4 systems hang every 3 days to 2 weeks... testing a RH VM patch now...
TAR open for 6 weeks!!! we look bad despite conservative approach...
appreciate suggestions from anyone...
[email protected] (203)740-5258 Brookfield, Ct

Tomcat over Linux

hi
i need to know which is better, to deploy JSP application over Windows or over Linux and why ?

The Java runtime environment doesn't automatically give you access to the OS environment variables. You need to pass the environment variables that you want available in your runtime during startup. This is done using the "-D<name>=<value>" options (see java -help for full syntax).
For Tomcat 4.0 you can pass parameters to the JRE by specifying the options to be passed in an environment variable named JAVA_OPTS (e.g. export JAVA_OPTS='-Dname=value'). For more info on this checkout the documentation at the beginning of the bin/catalina.sh in your Tomcat install directory.
Hope this helps.

How to Talk to an MCU over Linux

I am running Arch64 and I have an Intel 8051 microcontroller (Silicon Labs C8051F020) with the USB-to-JTAG connection. I installed the latest SDCC from AUR and am planning to modify an example code from the C8051F020 page (https://www.silabs.com/products/mcu/mix … 1F02x.aspx) to blink an LED (it's my first MCU project). Does anyone know how I can transfer the binary, once I've compiled it with SDCC, to the MCU itself, over the USB-to-JTAG cable/box? Is there a driver I should install for it or something? Thanks in advance, and I apologise for what is probably a dumb question.

I like the Atmel AtMega stuff myself. Nice little chips that are well supported in linux. The Atmel JTAG even integrates with gdb letting you debug from with your favorite environment (emacs, netbeans, etc...)
But, as to your question. I have not used an 8051 in over a decade, but you might see if you can get this to work:
https://www.silabs.com/Support%20Docume … ources.zip
You will have to compile it in the traditional GNU Autotools way
./configure
make
sudo make install
Last edited by ewaller (2009-09-17 04:17:55)

Dreamweaver and Linux OS'

Hi,
I have a Dreamweaver program. My father-in- law is going to
give me a new Home- Made computer with LInux OS. I am familiar with
Windows XP but never used Linux OS computer before. Can I install
Dreamweaver on this new computer?
Many Thanks,
Dien.

On 07 Nov 2006 in macromedia.dreamweaver, PeteC wrote:
> iwebstudent wrote:
>> Hi,
>>
>> I have a Dreamweaver program. My father-in- law is
going to give me
>> a new Home- Made computer with LInux OS. I am
familiar with Windows
>> XP but never used Linux OS computer before. Can I
install
>> Dreamweaver on this new computer?
>
> No. Linux is a completely different operating system to
XP.
>
> Dreamweaver does not exist for *nix.
Well, maybe. WineHQ reports good results (with a small sample
size) for
running DW 8 under WINE:
http://appdb.winehq.org/appview.php?appId=183
Joe Makowiec
http://makowiec.net/
Email:
http://makowiec.net/email.php

Dreamweaver on Linux, when?

Hi everyone! I'm new to this forum. I'm the CEO of a company
here in Italy and for our graphics we use all macromedia suite.
We love linux and we want to know if someone knows anything
about a macromedia and photoshop linuc version.
bye ALEK

<shrug>
Whatever. Arguments here aren't going to make this happen.
PS, ID, and DW are all workstation apps. Who cares what is
being run on
servers? If the workstation market is there, the development
will proceed.
If it's not, it won't. It's very simple economics, not a
popularity
contest.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Opally" <[email protected]> wrote in
message
news:e7e932$t07$[email protected]..
>
quote:
Originally posted by:
Newsgroup User
> Do you have PS for Linux? Or InDesign? I think that
speaks volumes about
> what you might get from Adobe. The desktop/workstation
market is just not
> there for linux.
>
>
> No comparison. The majority of web servers ARE *nix. Who
runs PHP on
> Windoze?
>
> Photoshop is only incidentally used for web development,
its heart is
> print
> production, and InDesign, of course, is for print
production, so there is
> no
> bond between those applications and *nix platforms.
>
> Dreamweaver, on the other hand, would be a natural match
with Linux.
> There's a
> BIG market for it on Linux type computers. Because the
majority of website
> development is targetted to *nix servers.
>
>

Dreamweaver on Linux

Dreamweaver cs3 is out and yet not on linux. so is there any
dreamweaver clone for linux mainly with coldfusion server
behaviours?

aptana with cfeclipse ?
never tried it though.
You cannot lose until you give up !!!
"Murray *ACE*" <[email protected]> wrote
in message
news:f34poq$lhj$[email protected]..
> No.
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.dreamweavermx-templates.com
- Template Triage!
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
> ==================
>
>
> "abhishek77" <[email protected]> wrote
in message
> news:f34n81$ia1$[email protected]..
>> Dreamweaver cs3 is out and yet not on linux. so is
there any dreamweaver
>> clone for linux mainly with coldfusion server
behaviours?
>>
>>
>
>

Sqldeveloper's window blank over Linux

Hi Forum
I've installed Sqldeveloper 1.1. Patch 1 over Mandriva Linux 2007 via rpm and via zip file for multiple platforms. Installation process was succesfull but in both cases when I ran sqldeveloper.sh application window appears with a normal behavior (Tittle in Window Title Bar, Icon, Minimize, maximize and close buttons, resize borders) BUT inside the window doesn't appear any kind of control: No toolbars, nor edit area or connection tree.
I'm using j2re version 1.5.0_08 and KDE 3.5. Any Idea for correct this problem ?
Thanks in advice !!

I'm not sure this will overcome your issue, but try using a JDK instead of a jre. I'm currently using Mandriva 2007, gnome and JDK 1.5.0_10. I've also successfully used JDK 1.5.0_08.
I never tried to get it to work with a jre because the SQL Dev download page refers to 'JDK 1.5'.
Good luck!

Best Performance for apex over Linux+HW RAID

Dear Experts,
Given:
-- Server Specs:
---- HP ProLiant ML370 G6 E5540
---- Processor name: Intel® Xeon® E5540 (4 core, 2.53 GHz, 8MB L3, 80W)
---- Storage Controller: (1) Smart Array P410i/256MB
---- 8 SAS HardDisks with 320 GB for each
---- 12 GB RAM
Required:
1)) What are the best practice bring the best performance to Apex for the following solution stack
---- Oracle Linux 6.3 x86_64
---- Grid Infrastructure 11g R2
---- Database 11g R2
---- Oracle Apex 4.2.1
2)) What is the best hardware RAID configuration?
3)) What is the maximum concurrent users of applications on apex according to the above specs+software stack ?
Regards
Mahmoud

Dear Alvaro
Thank you for your response.
The current status
When I entered HP ACU from bootable Smart Start CD, I found under the configuration of Smart Array P410i in Embedded Slot, the following:
-Smart Array P410i in Embedded Slot
---Internal Drive Cage at Port 1I : Box 1
------300 GB 2-Part SAS Drive at Part 1I : Box 1 : Bay 1
------300 GB 2-Part SAS Drive at Part 1I : Box 1 : Bay 2
------300 GB 2-Part SAS Drive at Part 1I : Box 1 : Bay 3
------300 GB 2-Part SAS Drive at Part 1I : Box 1 : Bay 4
---Internal Drive Cage at Port 2I : Box 1
------300 GB 2-Part SAS Drive at Part 2I : Box 1 : Bay 5
------300 GB 2-Part SAS Drive at Part 2I : Box 1 : Bay 6
------300 GB 2-Part SAS Drive at Part 2I : Box 1 : Bay 7
------300 GB 2-Part SAS Drive at Part 2I : Box 1 : Bay 8
The questions now:
1) Do you recommend the following configuration for RAID's logical arrays:
Using Logical View:
SAS Array A - 4 Logical Drive(s)
--- Logical Drive 1 (50.0 GB, RAID 1+0) ---> for OS
--- Logical Drive 2 (24.0 GB, RAID 0) ---> for SWAP
--- Logical Drive 3 (200.0 GB, RAID 1+0) ---> for ASM DATA
--- Logical Drive 4 (296.7 GB, RAID 1+0) ---> for ASM FRA
SAS Array B - 1 Logical Drive(s)
--- Logical Drive 5 (1.1 TB, RAID 0) ---> for non-critical applications and sources
2) What are your recommendations for the following steps to reach oracle apex 4.2 installed?
Best Regards
Mahmoud

Alternative for Dreamweaver on LInux[PHP]

Hi everyone I'm starting to learn about PHP and would like to know what PHP editor would be appropriate? Is netbeans good for PHP?
Thanks for the help...^^
Last edited by kaola_linux (2008-11-20 09:53:00)

See if there is anything you like at this link: http://www.linux.com/feature/48643?page=2

How doi install osx10.6 over linux mint 14 on imack7.1 i have disc?

i insert the disc and it comes up windows support,boot camp installer

First you must have a Mac that is capable of starting up from Mac OS X 10.6. If it came originally with a later version then it will not run 10.6.
What is necessary is a 10.6 installation DVD in order to start from (either the original that came with the Mac or a retail one which is still available from Apple). Then you use Disk Utility to reformat the hard drive as Mac OS Extended (Journaled) with GUID partition table. After this you install 10.6.
You can look up the model at one of the following links and see which Mac OS X was originally installed.
http://www.everymac.com/
http://mactracker.ca/

Can't view rest of document in Dreamweaver CS3

I'm a long-time GoLive user who has converted a number of
sites to Dreamweaver over the past few months. Yesterday I began to
convert an 1100-page PHP web site, representing my largest and most
complex client site. What I noticed immediately is that 90% of the
pages show only the menu bar in the "design view" area and are
blank below that. The code all displays properly in the code view
area. I'm really puzzled by this behavior.
The </head> tag shows in yellow in the design view.
Following that, I see the menu bar which is actually brought in as
an include file. Below that, every page is blank, except for PHP
template pages which are HTML pages and use slightly different
code.
In testing to try and isolate the problem, I found that the
page showed only when I deleted the line which called up the main
menu bar using an include file:
<?include('../components/menu-about.html')?><br>
What's curious about that is that this include command is
nothing new. Includes date back to the mid 1990's. There are other
include files in the HTML, and those display properly. I've checked
and double-checked the formatting for the include, and it is
correct. It displays properly in all browsers and is read fine in
GoLive. Only Dreamweaver chokes on this particular included object.
So I looked through the include file itself to see what I could
find.
It contains a couple of GoLive-specific Javascript function
calls in the head section, and the body tag has an onLoad call to
the GoLive Generated script file. However, when I removed those and
tried again, Dreamweaver still refuses to show the rest of the page
unless I remove the menu include from the code.
Any ideas how I can get past this annoying problem? I've gone
back to GoLive, hoping that CS4 might solve it, but this seems to
be a really weird one and I'd like to have a solution in place
soon. Thanks for any help you can offer.

This behavior (especially the yellow-highlighted markup) is
diagnostic for
invalid HTML (most likely duplicate <html>,
<head>, or <body> tags - or a
lack of the proper pairing of the opening and closing tags).
See if that's
the case.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Adwiz" <[email protected]> wrote in message
news:[email protected]...
> I'm a long-time GoLive user who has converted a number
of sites to
> Dreamweaver
> over the past few months. Yesterday I began to convert
an 1100-page PHP
> web
> site, representing my largest and most complex client
site. What I noticed
> immediately is that 90% of the pages show only the menu
bar in the "design
> view" area and are blank below that. The code all
displays properly in the
> code
> view area. I'm really puzzled by this behavior.
>
> The </head> tag shows in yellow in the design
view. Following that, I see
> the
> menu bar which is actually brought in as an include
file. Below that,
> every
> page is blank, except for PHP template pages which are
HTML pages and use
> slightly different code.
>
> In testing to try and isolate the problem, I found that
the page showed
> only
> when I deleted the line which called up the main menu
bar using an include
> file:
>
>
<?include('../components/menu-about.html')?><br>
>
> What's curious about that is that this include command
is nothing new.
> Includes date back to the mid 1990's. There are other
include files in the
> HTML, and those display properly. I've checked and
double-checked the
> formatting for the include, and it is correct. It
displays properly in all
> browsers and is read fine in GoLive. Only Dreamweaver
chokes on this
> particular
> included object. So I looked through the include file
itself to see what I
> could find.
>
> It contains a couple of GoLive-specific Javascript
function calls in the
> head
> section, and the body tag has an onLoad call to the
GoLive Generated
> script
> file. However, when I removed those and tried again,
Dreamweaver still
> refuses
> to show the rest of the page unless I remove the menu
include from the
> code.
>
> Any ideas how I can get past this annoying problem? I've
gone back to
> GoLive,
> hoping that CS4 might solve it, but this seems to be a
really weird one
> and I'd
> like to have a solution in place soon. Thanks for any
help you can offer.
>

Successful installation of 8iEE 8.1.7 on RedHat linux 7.2 but no luck with Oracle 9i

Hi All,
I've successfully installed Oracle8i EE version 8.1.7 on RedHat
Linux 7.2. However, I have NOT had much luck installing Oracle
9i version 9.0.1 on RedHat Linux 7.2. I am wondering if anyone
in this forum has any luck installing Oracle 9i on RedHat Linux
7.2. I am running Linux kernel 2.4.7-10.
Now I am not trying to start a shouting match here; however, it
seems to me that a person with any common sense would not run
Oracle database on a Windows platform. Instead of running it
on Windows platform, one would be much better off running it on
Linux platform. I am currently Oracle EE 8.1.7 on an dual-Intel
processor 266MHZ with 512MB of RAM with Linux as the Operating
System. I have to say that the performance of the box is really
solid. At the same time, I am also running Oracle EE 8.1.7 on
an identical hardware system with Win2K server and I have to say
that the performance system is really pitiful on this Win2k server.
The windows box can only 1 instance at a time. If I try to have
two instances running at the same time, the windows box just comes
to a screeching halt. In contrast, the Linux box really rocks. In
a testing environment, I have 3 instances running at the same time
and the linux is barely breaking a sweat. I am getting maximum
performance out of the linux box because I recompile the linux kernel
to optimize the box to run Oracle database.
Having said that, as an Oracle DBA newbie (with less than six months
of Oracle DBA experience, the last ten years as a Cisco/Unix Engineer),
I find it fascinating that Oracle is only certified to run on SUSE (may
be I am wrong and someone can correct me on this one) when RedHat is
probably the dominant Linux distro. It took three days to get Oracle 8i
version 8.1.7 to install on RedHat Linux 7.2. Why Oracle is slowed to
support Linux RedHat is something I just don't understand.
OK, enough of venting my frustration, if anyone has successfully installed
Oracle 9i EE version 9.0.1 on RedHat Linux 7.2, please share your knowledge.
In the mean time, if anyone interested in obtaining instructions on howto
install Oracle 8i version 8.1.7 on Redhat Linux 7.1/7.2, send me an email
at [email protected] and I will send the instructions. The instructions
are written specifically for "windows dummies" so it is very to read and
follow. If you have been Unix for a long time, there will be instructions
in there that are so easy some of you may ask why put those in there in the
first place. My response would be: "windows dummies".
Regards,
Michael (david)

I very much agree with you Oracle is working very much better on Unix/Linux than Windows BUT in many cases you are obliged to use windows ( in Case that My company high managment enforce it ) , I have installed 9i on Windows and Linux , I am herunder including the full details :
========================================================================
Installing Oracle 9i on Linux
     Linux : Redhat 7.2
     Oracle : 9i Server EE 9.0.1.0.0
     RAM Used : 256 M Ram
     Hard Disk : IDE RAID
     Linux Kernel : 2.4.4-10
     JDK : Blackdown jdk118_v3 => downloaded from www.blackdown.org
     All shell here is the Bash shell ( Bourne again shell )
1.     To run a shell script over Linux , just drag the shell file from the file manager and drop it to a shell window
     Be sure to have swap space of 400 M or more
     If the systems stop responding for some time , leave it , it will continue
     Be sure to make a stage area for the CDs # 2 , 3 only because you will start from the CD 1 but after going in the installation the CDROM freezes and refuses to open door to replace CD ,, in this case you will switch to the last 2 CDs from the stage area
     Make sure you have the following executables at /usr/bin : MAKE , AR , LD , NM , C for Unix that is installed during Linux installation from the distribution media
Steps ( Root User ) :
1.     be sure to have to have your server domain is like hostess.com.eg and you can be able to ping it
     open /etc/hosts
     add a line as follows ( for instance ) :
     192.168.0.11 hostess.com.eg hostess
     ping hostess.com.eg
     ping hostess
     ping 192.168.0.11
     be sure to have a replay for all of them
2.     install JDK inside the /usr/local directory => after downloading the JDK you can easily decompress it but just clicking at it using the GUI
3.     get to the / prompt
4.     type ln s /usr/local/jdk118_v3 /usr/local/java
5.     download binutil RBM from Redhat for version 7 of Linux to downgrade binutils for Linux 7.2 or you will encounter an error at the third CD set
6.     download it from : ftp://ftp.redhat.com/pub/redhat/linux/7.0/en/os/i386/redhat/rpms/binutils-2.10.0.18-1.i386.rpm
7.     run it as follows : rpm -Uvh force nodeps binutils-2.10.0.18-1.i386.rpm
8.     change to /proc/sys/kernel
9.     type cat sem
10.     you will get : 250 32000 32 128
     250 => SEMMSL
     32000 => SEMMNS
     32 => SEMOPM
     128 => SEMMNI
11.     you need to have the SEMOPM to be 128 , to do so , locate the file called sem open it replace the value of 32 with 128
12.     type again cat sem to be sure of taking the required effect
13.     after the installation ends just re-install the 7.2 utils again as follows :
14.     rpm -Uvh force nodeps binutils-2.11.90.0.8-9.i386.rpm
15.     you can find the last RPM at the 7.2 CD set
16.     after downloading the Oracle files from the net you need to decompress it as follows (one step) :
     zcat linux9i_disk1.cpio.gz | cpio idmv
     zcat linux9i_disk2.cpio.gz | cpio idmv
     zcat linux9i_disk3.cpio.gz | cpio idmv
17.     you can decompress them at 2 steps as follows :
     gunzip linux9i_disk1.cpio.gz
     gunzip linux9i_disk2.cpio.gz
     gunzip linux9i_disk3.cpio.gz
     cpio idmv < linux9i_disk1.cpio
     cpio idmv < linux9i_disk2.cpio
     cpio idmv < linux9i_disk3.cpio
18.     Now you have 3 directories , have care when Burning them to CD because you need to take care of paths
19.     if you have downloaded the files via a Windows machine and have a MKS installed over it you can easily invoke Visual Pax and decompress the files at one go using the GUI program
20.     log on to Linux as Root and run commands in the file commands.txt
21.     log on as user Oracle to be sure that its created
22.     log on as root again
23.     get to the directory of /home/oracle
24.     enable showing the system files
25.     open the file of .bash_profile
26.     add the accompanied bash file contents at the end of it to set the environment variables
27.     log on as user Oracle
28.     open shell and type set and be sure that environment variables are set correctly
29.     open shell and change to the cdrom by typing cd /mnt/cdrom => Linux 7.2 is an auto mounting OS so you at no need to mount the CD drive prior to using it and if you need to mount it just type : AS ROOT
     mount t iso9660 /mnt/cdrom /cdrom
     this is surly after creating a directory at / called cdrom
30.     Start the installer ( as Oracle User ) by typing ./runinstaller
31.     the installer will ask you to run a started script as root , you may open a shell and type su then open Nautilus ( if using Gnome or File manager as super user if using KDE ) and drag the noted file to the shell screen and press enter ,, after it is ended continue with the installer
32.     if asked to supply JDK home directory then it is /usr/local/java
33.     Unix group Name ( to update Oracle software ) : oinstall
34.     Oracle home is : /oracle/9.0.1
35.     base directory : /oracle/orainventory
Hisham Nagia
IT Manager / OCP DBA
Hostess Egypt / EFG-Hermes - CIIC

Oracle 9i and Linux 7.2 Suse

Hi:
Please let me know if i,m right...
I,m newie and i would like to install Oracle 9i Database over Linux 7.2.Do i have to download the linux vesion of the database?
Somebody knows if there is an installation guide for this?
Where can i get the database for linux 7.2 since i have de cd,s for NT-2000.
Thanks a lot for your help and regards

Yes, you need the cd for Linux. You can download them at technet (http://technet.oracle.com -> download). You find an installation guide on the first disc.
Also check this url :
http://www.suse.com/en/support/oracle/db/9i_71_72.html

Dreamweaver over Linux

Similar Messages

Maybe you are looking for