DreamWeaver Plug-in for New DreamWeaver Versions?

Will Oracle be updating its InterMedia plug-in for DreamWeaver versions 3 and 4 any time soon?
Thanks very much,
Ron Sweet
Solid Solutions Inc.
[email protected]

Yes, we are going to support Dreamweaver UltraDev version 1 and version 4.
Version 1 of the Oracle interMedia Extension
for Macromedia UltraDev is available for
both the Windows NT/2000 and the Macintosh
platforms. It supports the development of
Web applications in both the JSP and ASP
(with either JavaScript/or VBScript) models.
This extension should also work with
UltraDev 4.
We are going to submit the extension shortly
to Macromedia in order to get an approval.
You should be able to download the extension
from OTN as well as the Macromedia Web site
when it becomes available.

Similar Messages

  • N73 - date for new software version

    Please see below the date for the next update. This came from their Director of Customer Care:
    "With regards to your recent enquiry concerning software availability for your product code 0539101 for UK Country Variant I can confirm that at present you already have the latest software version available. New software version for your product should be available no later than Friday the 8th December in both our Nokia service points and Nokia Software Updater."

    goodie...
    for all those complaining about no Country Variant fw editions, just hang on 2 more weeks and have a merry xmas

  • WF item attributes for new workflow versions

    Hi All,
    I have a query regarding Item Attributes for a particular workflow.
    Assuming that for a particular version there are say 100 Item_Attributes for a particular Workflow.
    In case a new version is loaded and if the new version is having say 102 Item_Attributes then
    2 additional attributes appear in WF_Item_Attributes table for that Item_Type.
    What if in the new version the number of attributes gets reduced to say 95.
    Will the number of attibutes for that particular Item_Type in WF_Item_Attributes will be 95???

    workflow creates versions for the new workflows you create(for most of the activities though not all)
    satish paul
    Hi All,
    I have a query regarding Item Attributes for a particular workflow.
    Assuming that for a particular version there are say 100 Item_Attributes for a particular Workflow.
    In case a new version is loaded and if the new version is having say 102 Item_Attributes then
    2 additional attributes appear in WF_Item_Attributes table for that Item_Type.
    What if in the new version the number of attributes gets reduced to say 95.
    Will the number of attibutes for that particular Item_Type in WF_Item_Attributes will be 95???

  • MDM Publisher plug in for Adobe InDesign version CS5

    Hi,
    Does anyone know when SAP will have a plug in for Publisher/Adobe InDesign CS5 instead of CS4?
    Kind regards
    Jonna

    Hello Jonna,
    I see that you inquired about the Adobe InDesign CS5 plugin and that Hedda Cohen indicated that there IS a plugin for MDM Publisher...but she did not indicate where to find the plugin for download. Can you tell me where to find the CS5 plugin?
    Thank you very much!
    Dana Viglietta

  • Small runtime engine for newer labview versions?

    A few times in the past I have created simple LabVIEW standalone executibles.  I did this in 8.6 and used the runtime engine minimal installer instead of the full version.  This resulted in an installation package size of 30-35 Meg.  
    I agin need to create a simple executible but have not seen a minimum runtime installer for any LabVIEW version since 8.6 
    Are there any minimal runtimes for other versions? 
    The default 2014 runtime is 264 Meg!!!  It is hard to explain to a customer why a simple "Hello World" program requires a 200+ Meg download.
    Solved!
    Go to Solution.

    Jack Dunaway has documented a way of segmenting the run time engine, basically only including the pieces of it you need.
    https://connect.wirebirdlabs.com/knowledgebase/articles/172999-segmenting-the-run-time-engine
    And here is an idea exchange item on it.
    http://forums.ni.com/t5/LabVIEW-Idea-Exchange/Segment-the-LabVIEW-Run-Time-Engine-RTE-to-ONLY-Necess...
    Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
    If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

  • Old plug-ins for new Elements

    I'm running Mac OS X 5.8 (Leopard) and using iPhoto '09 as my "organizer". I just installed Elements v.10 and I'd like to know if and how to install plug-ins (On One Essentials for Elements and One-Click WOW) that I used for Elements v.4. 
    Will they work with the new version?
    Thanks,
    Firsch

    If you go to the following site you will get much of the information you need as well as some useful tools. Some of the downloads will also come will a plain text document with instructions on how to install plug-ins.
    http://www.obsidiandawn.com/
    cheers
    Andrew

  • For new itunes version, how transfert Iphones content to Itunes

    Hi Guys,
    I try to import my whole stuff buy in Itunes store before upgrade the Itunes version.
    Someone can help me because I don't know how I can transfert the shops stuff in
    my Itunes application before upgrading the Itunes version...
    Sorry for my bad english and many thanks in advance.

    Here's how to transfer your content from your device to your computer

  • Best Practice for New Doc Version?

    I'm a RH novice who needs to create a V1.1 doc based on the
    V1.0 source topics, TOC, and images. I'm using RH HTML X5. What is
    my best practice? The previous author left a unclear doc suggesting
    something like the following:
    Copy the current V1.xpj, V1.hhc, and V1.hhp files and rename
    them as V1.1.xpj, V1.1.hhc, and V1.1hhp
    Place the renamed files in the V1 root directory and open the
    V1.1.xpj file.
    Create and edit new content
    Not understanding RH too well, this seemed reasonable. It
    appears what he is suggesting will bring everything forward in a
    new project, but leave the V1 structure intact. I tried this, and
    it seemed to be working but I was confused by RH also making
    changes to the OLD V1.cpd and V1.pss (I don't know that those files
    are).
    So, apparently the copied files contain references to at
    least the old cpd and pss files (and maybe others). I'm concerned
    that continuing down this path will corrupt V1 and leave me
    mis-matched conventions. Some files being V1, and some being V1.1.
    Is there a how-to somewhere that can help me create a new
    version and not muddy up the old? Do any X5 gurus remember how they
    did this?
    Thanks in advance,
    Keith

    Peter,
    Hopefully you'll see this. I tried you suggestion. Opened the
    old file and renamed the project. About 10 links came up broken
    that weren't broken before. Any ideas why this would happen. I
    didn't make any changes other than the rename.
    Thanks,
    Keith

  • Plug-in for 11.7 version

    I downloaded recent version of adobe flash player 11.7.700.224.  I can only hear audio but cannot view any video.  I running off of Windows 7 and Internet Explorer 9.  I ensured I did in fact downloaded the recent version.  I disabled the Active X filtering.  I enabled flash player add-onns. I deleted all flash player browsing data.  However once in the advanced tab, in the bottom I found my ActiveX Version: 11.2.202.235 and Plug-In Version: Not Installed.  Finally I removed the flash player cache.  I couldnt disable the flash player harware acceleration because I could not view the video.  Are my problems stemming from the Plug-In version?  If so, which Plug-in do I install?  Finally, if not what is the problem?

    You need the plugin if you use other browsers (e.g. Firefox) beside Internet Explorer.
    What exactly means "cannot view video"; do you see black, or white, or green?  In that case you may need to update your graphics driver; see http://forums.adobe.com/thread/945765

  • Does the Previous Folders 1.1.1 add-on no longer work for newer Firefox versions?

    I asked this question once before (eight months ago) but never got an answer, and no one else seemed to be having the problem. I was accustomed to using this add-on, called Previous Folders:
    https://addons.mozilla.org/en-US/firefox/addon/previous-folders/
    but ever since Firefox Version 22.0 (approximately eight months ago), it has no longer worked. Its function is to remember the last 20 locations that you have saved to, and keep them in the address bar drop-down list for easy access.
    I just re-installed Windows 7 (I was having some other problems), and I thought that perhaps it (the add-on) might work again after the re-installation... but it seems that it still does not. If anyone knows anything, or if anyone is also having this problem (it seems that very few people use this add-on or even know about it), any help would be appreciated.

    The '''maxVersion''' coded in the install.rdf file of that extension shows Firefox '''14.0'''. So there's a good chance that its not really compatible any longer, as Firefox 22 had changes to the Download Manager code.

  • Experimental WIC import plug-in for Photoshop

    Hello,
    For what it's worth, I've written a small import plug-in for Photoshop, that uses WIC codecs to access the image files and thus is compatible with manufacturer-provided decoders such as the Nikon NEF codec and the Canon CRW/CR2 codec. It should presumably work with the new Nikon NRW codec, supporting the Nikon P6000 camera, when it comes out.
    This is an experimental plugin, provided on an "as-is" basis.
    http://www.fastpictureviewer.com/bin/WICAcquirePlugIn-ALPHA.zip
    There is no color-management support in this version, if you import, say, an image shot in Adobe RGB, you have to use "Edit->Assign Profile..." after importing to let Photoshop know about the image's profile. The plug-in was tested with CS3 but does not depends on anything except WIC, so it *may* work in other apps able to use Photoshop import plugins.

    New cameras need a new plug-in.  Adobe only updates the plug-in for the current version of elements.  Since your Elements is one version out-of-date, your camera may be too new.  Help / Updates in Elements should find the latest version of the plug-in that is still applicable.
    If your camera is too new, then you’ll need to purchase an upgrade to PSE 11, or use the newest DNG Converter 7.3 to convert your NEFs to DNGs that will open in an older version of the plug-in.
    You can find the various updates on http://www.adobe.com/downloads/updates using the dropdown list near the top.

  • What are the patches released for new browsers

    Hi Gurus,
    It's a general question.
    Is oracle released any patches for new browser versions?
    Our client is experiencing the different issue with the latest browsers.
    This is one of the error message which they had received: iRecuitment - oracle error 1403:java.sqlSQLException:ORA-01403: from Chrome user - need latest Patch.
    Regards,
    Joshna.

    You need to use a certified browser -- Please see the docs referenced above for the list of supported browsers and client OS.
    If you still get the same error, please see these docs.
    Critical Patch Released For Release 12.1.1 and Higher Customers Using Projects Web ADI Functionality [ID 1315848.1]
    Accessing Application Get Error: Fnd_session_management.Updatessioncontext Sql Exception [ID 1316294.1]
    Thanks,
    Hussein

  • How to setup a default direction for new divs in fluid grid layout in dreamweaver?

    Hi,
    how to setup a default direction for new divs in fluid grid layout in dreamweaver? I am an RTL interface user, I need my new divs to be inserted from right to left not Left to Right! could it be in dreamweaver?
    Thanks.

    This may get me into strife, but my experience is that you are better off finding another platform for your RWD.
    The framework that I tend to use is by Zub-Foundation http://foundation.zurb.com/.
    A commercial product that I have come to appreciate can be found here http://www.projectseven.com/products/tools/composer/index.htm. Please do not mention me if you happen to choose this product.

  • How to setup a default size for new divs in fluid grid layout in dreamweaver?

    Hi,
    how to setup a default size for a new divs in fluid grid layout in dreamweaver? I don't need the default size for new divs as a 100% width, I need them 13.69% as a one coulmn width only (7 coulmns fluid grids layout for desktop size 1000w).
    This problem I've faced when I intended to insert dozens of fluid grid divs in the layout.

    Sorry, I don't believe that you have had a good look at the Foundation framework. I'll now hold your hand while we go through the basics.
    Here is the specific page http://foundation.zurb.com/docs/components/grid.html
    The default values are
    Em-base : 16px
    Row width: 62.5em (62.5em x 16px = 1000px)
    Columns per row: 12
    These and other default values can be changed. The fact of the matter is that if you stipulate a section width of 2 or 3 or 12 columns, the widths will automatically be calculated for you.
    In your case, if you want 7 columns, all you need to do is change the number of columns per row and the rest is done for you.

  • SAP NetWeaver Gateway plug-in for Eclipse - New Version Available

    Hi All,
    I am happy to share with you that a new version (2.4.101 )of the SAP NetWeaver Gateway plug-in for Eclipse is now available [here|http://www.sdn.sap.com/irj/scn/downloads?rid=/webcontent/uuid/b09d414f-f227-2f10-bdbf-ba31c844b432].
    We will be happy to get any feedback on the tool from you.
    What's new?
    Framework
    u2022 Proxy generation support from Search Console
    u2022 New exploration screen (user provides URL) in Wizard
    u2022 OData 1.0 support (exploration including aggregation of catalogs)
    u2022 Enhancements (improved performance, bug fixes)
    Java Toolkit
    u2022 New Connectivity API (X.509 enablement, XSRF protection, error handling)
    u2022 New Parsing API
    u2022 OData 1.0 support
    PHP Toolkit
    u2022 OData 1.0 support
    Thanks,
    Nir

    Hi Michal,
      While installing the Netweaver gateway plugin for eclipse Juno version through the following link
    https://tools.hana.ondemand.com/juno   under Help -> Install New Software... I have encountered below error.
    Can you please help me in resolving it.
    An error occurred while collecting items to be installed
    session context was:(profile=epp.package.jee, phase=org.eclipse.equinox.internal.p2.engine.phases.Collect, operand=, action=).
    Unknown Host: https://tools.hana.ondemand.com/juno/features/com.sap.core.editor.feature_1.0.6.jar
    tools.hana.ondemand.com
    Many thanks in advance.
    Regards,
    Parthi

Maybe you are looking for