Dreamweaver rame
Bonjour,
j’ai un problème avec Dreamweaver et le temps d’exécution des opérations quand je travaille sur des templates construits avec un CMS. Dreamweaver est d’une lenteur la-men-ta-ble j’ai la toupie colorée qui tourne sans arrêt à chaque modification que j’apporte, bref il est tout simplement impossible de travailler dans ces conditions.
La machine que j’utilise est un MacPro avec 20Gb de mémoire vive donc je ne pense pas que les performances du Mac soient à la base des lenteurs que je rencontre.
Est-il possible d’allouer plus de mémoire à Dreamweaver?
Faut-il désactiver certaines options dans les préférences?
Merci de m’éclaircir à ce sujet.
Edit: À titre d'information, je viens de m'apercevoir dans le moniteur d'activité que pour certains templates le % du processeur s'arrête à 100%, d'où la lenteur des opérations. Sur d'autres templates, là où je n'ai pas ce problème, le processeur monte tranquillement à 200%/300%, d'où la fluidité des opérations…
Edit-2: Ok, avec la désactivation de JavaScript (ou avec la commande "figer") Dreamweaver à le temps de prendre du souffle, mais par moment on ressent tout de même qu'il est à la traîne... d'autres conseils à me donner? Merci.
If there is a solution, you'd probably find it on the Adobe forums:
http://www.adobe.com/support/forums
Similar Messages
-
Powerbook G4 1.67 ghz, 2Gb ram, OS X 10.5 Leopard. Is it good enough for word processing, Dreamweaver, flash, sculptris, some programming software, Internet browsing, and some basic video editing? It also includes iLife and iWork, what is actually included in these packages?
This is the fastest of the G4 Powerbooks which was a good performer when it was new. Graphics intense programs will not perform well by todays standard. In addition the up to date software programs need an Intel processor and more RAM. iLife includes iPhoto, iMovie, and GarageBand. iWork includes Pages, Numbers, and Keynote.
http://www.apple.com/hk/en/iwork/
http://www.apple.com/lae/ilife/ -
OT: Dreamweaver quits after ram upgrade
Anyone had this senario before. I upgraded ram from 1gb to
2gb and now
MX04 just keeps quiting on start up, lol.
I haven't done a complete reinstall of the software yet but
any ideas
why this should be happening?
All other software, Photoshop, Illustrator, Quark, InDesign
appear at
the moment to be uneffected.
Iz a weird, weird world.
Humm I was intending to upgrade to CS4 but I'm awaiting the
trial
version first.
Oh well I guess I go back to other computer for the moment.Hi Alan I have the issue with MX04 so I don't think below
applies,
according to this line:
'The crashes do not occur in Dreamweaver 8 or earlier (Ref.
229536).'
Problem just started after I upgraded the ram from 1gb to
2gb, which
seems odd, but hey I expect anything these days. Some file
within DW I
think may have been affected by the time/date because on
reboot I had a
warning that the computers clock/date was set to March 2001
and may
interfere with some software, even weirder as I only
purchased the
computer last year, so why the clock should go back to 2001 I
don't know.
I'll try a complete reinstall and see if that clears it up,
overwrite
the corrupt file hopefully. It doesn't matter much to be
honest I was on
the verge of upgrading so I can live with it for now.
Thanks for your input.
Alan wrote:
> Technote:
>
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb402776
>
> quote from technote/
>
>
> TechNote
>
> Dreamweaver CS3 crashes after Daylight Savings Time ends
>
> Issue
>
>
> Adobe Dreamweaver CS3 crashes when working with certain
PHP or ASP files in
> Code view or Design view after the clock goes back one
hour, when Daylight
> Savings Time ends. The crashes only occur when selecting
certain lines in
> Code view, or selecting certain objects in Design view.
The crashes only
> occur in files that have PHP or ASP code, intermingled
with HTML code. The
> crashes do not occur in Dreamweaver 8 or earlier (Ref.
229536).
>
>
> Reason
>
>
> The Dreamweaver CS3 WinFileCache-AD76BB20.dat file has
been corrupted by the
> time change.
>
>
> Solution
>
>
> 1. If Dreamweaver is open, quit the application.
> 2. Delete the WinFileCache-AD76BB20.dat file from the
Dreamweaver user
> configuration folder. Note that on Windows, the
Application Data and AppData
> folders are hidden by default, so verify that your
Windows Explorer folder
> options are set to View Hidden Folders. The location of
this file is as
> follows:
> * Dreamweaver CS3 on Windows Vista:
> C:\Users\[username]\AppData\Roaming\Adobe\Dreamweaver
9\Configuration
> * Dreamweaver CS3 on Windows XP:
> C:\Documents and Settings\[username]\Application
Data\Adobe\Dreamweaver
> 9\Configuration
> 3. Restart Dreamweaver.
>
>
> Keywords
>
> Code/Design view, Daylight Savings Time, Dreamweaver,
crashes
>
> TechNote Details
> Last Update: 11-05-2007
> ID: kb402776
> OS:
> * Windows XP, Windows Vista
> Permanent Link:
http://www.adobe.com/go/kb402776
>
> /q
>
> -
Dreamweaver CS5 on Lion Opens but then won't work
I'm using Dreamweaver CS5 with Lion 10.7.2 on a new iMac 3.4 GHz Intel Core i7. I've had the machine about 2 weeks and Dreamweaver worked fine. Yesterday what happened was that I can launch the program but cannot use it. Anytime I click any menu item in the program like the file menu or help menu I get a spining ball. I can't open files in Dreamwever from outside or inside it. I can't do anything at all in Dreamweaver. I wait a long time and the spinning ball doesn't stop. I didn't do anything new except add ram to the computer and the ram works fine and shows up in "about this Mac" and has caused no problems. This Dreamweaver is a part of CS5 Web Premium and whatever the problem is it has not effected Photoshop CS5. In fact I have no problems anywhere else on my computer except for Dreamweaver.
I've tried the following solutions that I saw in these and other forums and nothing works:
1) in Dreamweaver preferences changed the following:
[REMOTE DOWNLOAD]
remotedownloadcachesize=50
remotedownloadallow=TRUE
to
[REMOTE DOWNLOAD]
remotedownloadcachesize=50
remotedownloadallow=TRUE
resolveremoteurltoipaddress=FALSE
That didn't work so I changed it back.
2) repaired disk permission on my hard disk from disk utilities, then verified the hard disk and it was ok, restarted various times.
3) tried replacing preferences and app support from previous days in time machine when it work but no change.
4) deledted com.adobe.Dreamweaver.11.plist from preferences. That didn't work so put it back
5) checked and remade permisions for user at ~/library/application support/adobe/dreamweaver cs5 but the permissions were already at read & write
6) renamed ~/library/application support/adobe/dreamweaver cs5 folder and restarted Dreamweaver
7) renamed ~/library/application support/adobe/dreamweaver cs5/en_US/Configuration and restarted Dreamweaver
8) deleted ~/library/application support/adobe/dreamweaver cs5 and restarted Dreamweaver
9) uninstalled Dreamweaver using Dreamweaver's uninstall app and reinstalled it from my disk and updated it.
10) tried using Dreamweaver from a different user login and it worked, but I need it to work in THIS login. I can find no way that this user is corrupt.
I hope someone has an idea of what to do.New info. My husband just installed the older version of Firefox, and it is also not responding. Again without ever seeing a request for a response from him.
-
Dreamweaver crashes in Leopard and Snow Leopard
Hey guys, so this issue has been going on for about two weeks now. I am trying to get Dreamweaver running on my computer to start my own site.
I went to adobe.com to try the Photoshop and Dreamweaver trial and installed it to my iMac (3.06GHz, 2GB RAM, OSX10.5.8). The photoshop trial works perfectly and have been using it for about two weeks now. However, every time I try to launch Dreamweaver it bounces in the dock, then the rectangular Dreamweaver Splash comes up, hangs then crashes. Normally the splash rectangle has like initializing... but nothing. Just the blank splash and a crash. I have reinstalled atleast 6 times in one day with no luck (Photoshop is still running great).
I've looked here for help so far:
- http://forums.adobe.com/thread/417116
- http://forums.adobe.com/message/2188511#2188511
Yesterday I got my new MacBook Pro (13" 2.26 - Fresh install of Snow Leopard). I redownloaded the trial from adobe and installed. Same crash.
This is the crash report:
http://files.me.com/nayeemhassan/zrcj1q
Any help would be seriously appreciate. This is driving me up the wall.
Message was edited by: kungfookillerI just installed the 10.6.2 update and can report that Dreamweaver hasn't crashed all day. Quite a change since 10.6.1 where it would crash every 5 minutes.
-
Problem with Dreamweaver Crashing When Trying to Resolve Bad Image URLs
I have consistently had this problem ever since using Dreamweaver CS4 (3-4 years). I constanly hand code HTML emails using Dreamweaver (about 100-150+ / yr), when I start a new email, becaue of the nature of the emails, I have to use absolute URLs for the images contained within said email. Usually when I go to create a new email, I pick up an old one, to grab keep the same basic template and then do a find and replace to update the URLs for the images contained within the email. The emails and image assets are kept on a web server and separated out with different directories, for example: mysite.com/email1/ and mysite.com/email2/. If I fail to upload all of the images from email1 into email2's directory or is I mistype the new URL Dreamweaver gets stuck when it tries to resolve the updated URLs and it can't find the images. Quite frankly, I don't need dreamweaver to resolve the URLs for images, I don't use design view and probably never will, it automatically pulling the height and width attributes is conveinient but not neccessary. Dreamweaver will stay hung up (completely unresponsive) indefinitely when this happens, and I usually have to kill the process via the Task Manager to even get it to shut down. Then when I restart Dreamweaver it rebuilds the site cache which takes at least 5-10 minutes, I have a very large internal developement server. This has caused me an absolute ton of frustration and lost time. I was hoping someone could suggest a solution.
A couple of ideas I have kicking around as possible solutions but don't know how to do:
Killing the resolving of the absolute URLs (I can't find this in the Dreamweavers settings, I haven't checked the config files themselves though)
Disabling design and split view (last resort)
In case this helps my, system info:
Windows 7 64-bit
Intel Xeon W4530 @ 2.8 GHz
12.0 GB of RAM
Abobe CS4 Master Suite
Thanks,
JasonThank's for replying. Since the first time I put in this answer, I've done a couple of tests to see what actually would go through the exporting process in iMovie and it turns out that I can export videos created using my webcam along with videos with slideshows.
The only problem is that with the slideshows (which is the type of video I'm attempting to export now), if I'm using all still images/pictures, I can only export videos no longer than about forty five seconds...anymore than that and iMovie crashes.
So my new question is...do you or anyone else know why this could be and how I could fix this problem? Also, I'm not very tech savy and this is the first Mac I've ever owned so more details and instructions in the answers would be greatly appreciated. Thanks. -
I downloaded a trial version of dreamweaver. It worked for a
few days, then stopped working. When I click on the desktop icon it
loads and asks me if I want to continue with my trial (29 days
left) or enter serial number. When I click continue with trial a
"Dreamweaver 8" banner comes up (indicating it is loading) then it
closes. I phoned technical support and wasn't able to get through
several times. When I finally did (after 45 minutes) the conclusion
they gave me was that THEY COULD NOT HELP ME FOR "FREE" because it
was a trial version. I really want to learn this program and would
really appreciate any help. I also checked out the dreamweaver
download trouble-shooting page and tried a few things which did not
seem to help. My computer is fairly new and has more than enough
memory (160G or so?).
THANK YOU SO MUCH FOR ANY HELP!I'll try. What are your machine specs. You say 160G of
memory? I am
assuming you mean a 160 gb hard drive. That is not memory.
How much RAM do
you have? What operating system are you running?
Did you download the trial from the Adobe site? Do you have
antivirus or
firewall software that might be blocking the program?
Nancy Gill
Adobe Community Expert
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: DMX 2004: The Complete Reference, DMX 2004:
A Beginner''s
Guide, Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"Catherine Lalonde" <[email protected]>
wrote in message
news:epc33v$93o$[email protected]..
>I downloaded a trial version of dreamweaver. It worked
for a few days, then
> stopped working. When I click on the desktop icon it
loads and asks me if
> I
> want to continue with my trial (29 days left) or enter
serial number. When
> I
> click continue with trial a "Dreamweaver 8" banner comes
up (indicating it
> is
> loading) then it closes. I phoned technical support and
wasn't able to get
> through several times. When I finally did (after 45
minutes) the
> conclusion
> they gave me was that THEY COULD NOT HELP ME FOR "FREE"
because it was a
> trial
> version. I really want to learn this program and would
really appreciate
> any
> help. I also checked out the dreamweaver download
trouble-shooting page
> and
> tried a few things which did not seem to help. My
computer is fairly new
> and
> has more than enough memory (160G or so?).
>
> THANK YOU SO MUCH FOR ANY HELP!
> -
Safari is using all my free Ram and resources
Ever since Safari 5.1 and the emergance of "Safari Web Content" safari now takes sometimes up to 2GB of Ram! Thats more than every other program running combined! I am then left with ~10-50 mb of ram to share with Dreamweaver Photoshop and several other programs.
Once it bogs down all my resources it will require me to reload all my pages before I can use any of my pages. Once it returns its still using just about as much resources.
-First of all it is not my extenstions or plug-ins, (I never had any till just recently)
-I am running safari on just a few windows on several desktops.
-I almost never experience this amount of ram usage before 5.1
I have seen others experience this and the only viable solution seems to be "just close down safari and open it back up"
I am developing for the web and keep several pages open on multiple desktops for different reasons, when I close down Safari all my windows from all my other desktops (at least now safari saves my old windows) and opens them all on one desktop and taking sometimes nearly a minute to do so.
It has been two versions now since 5.1 (5.1.1, 5.1.2) and little has been done in regards to (in my opinion) this very serious issue. (there might have been slight decreases in ram usage but if so I dont really notice it)
What can I do (or what is being done) to limit the amount of Ram consumption Safari is allowed to take (adobe programs have this option)I have the same issue. I see that no one has added to this since March. Does that mean it was address somewhere else? I understand the app is designed to use as much memory as it can grab to make it run better, but when it grabs so much that you start virtual memory thrashing, that's a problem. I have a Mac Mini with 2GB that was barely functional when Safari was running. I just upgraded to 8GB, and it's much better, but Safari still gladly takes half of that memory. I don't see how clearing the cache or history would have anything to do with RAM utilization. I agree this is a real problem.
-
Dreamweaver 8 not responding on cfm page
I have an existing .cfm page that I'm adding
<cfqueryparam> tags to several queries. Once I add the new
code if I try to highlight it in code view Dreamweaver quits
responding and peggs my processor and also uses around a gig of
physical ram. This continues until I end the Dreamweaver task using
Task Manager. The code is valid and works correctly through a web
browser but hangs as soon as I try to select any text in
dreamweaver. I'm wondering if anyone has experienced this type of
issue and if so is there a way to stop it? Thanks in
advance.On Wed, 4 Oct 2006 15:35:01 +0000 (UTC), "900spg"
<[email protected]> wrote:
>Just an update in case anyone else runs into this issue.
I have deleted the
>WinFileCache-*.dat as suggested above. I deleted the
entire local configuration
>directory and the registry keys for Dreamweaver as well.
I did test the .cfm
>page in question on a different machine running
DreamweaverMX and it worked
>just fine. I'm now in the process of rebuilding the
entire page piece by piece
>to try to determine the section of code that is causing
this problem. When my
>Dreamweaver hangs I get the following errors in my event
viewer:
> Hanging application Dreamweaver.exe, version 8.0.2.2809,
hang module hungapp,
>version 0.0.0.0, hang address 0x00000000.
> and
> Fault bucket 290312414.
> A crash logs directory is not created. Will post more if
I find the root cause
>of the issue.
I don't know if this is easier for you, but if you have more
than one
stick of RAM, you might try pulling them out one at a time.
You might
have a bad stick. -
Crash and Memory errors in Dreamweaver MX/8/9/10. No idea!
After executing Dreamweaver v8-10, program work fine, but if switch between application (Alt-Tab for exemple), program crash (exit with code 0xc0000005). This error show different debuggers. Windows show defaoul error "The memory could not memory "read"". Dreamweaver MX don't start. Try
almost all, what may changing situation. Disable DEP, checking RAM with memtest86, remove all Adobe products, cleaning registry, delete all setting data. Run program from safe-mode, without services of OS, closing almost all not standart, unload antivirus ware, and firewall. No change:( This trouble static, and no changing. In another software this problem do't viewing.
System:
OS: Windows Xp Pro SP3
MB: Asus P5K SE
CPU: Inter Core 2 Duo 2.6 MHz L2
RAM: 2x1Gb Kingston 800MHz
GPU: Sapphere Radeon 1950 SE 512 Mb
Kasperski Internet Security 2009
.NET Framework 3.5
Visual C++ Express SP1
I understanding, this is system bug. But don't know, how this can be fixed? 2 days i tring, but 0% succses:( Else Flash begin work more correctly, with third-party components:) Anybody may help to me? I searching so much, but no result. I could reinstal Operating System now, and one software, bad motivation.It seems that there is a conflict in accessing memory. When I replaced the video card driver to the older, I noticed that CrushDoctor can not recover from the terminate dreamweaver.exe, endlessly shifting to other memory addresses. Before replacing the driver of such attempts have been up 2-3 times. But, given the experience run in Safe-Mode, it is not clear which system process in the memory, can interfere dreamweaver any version?
-
Dreamweaver CS3 hangs on "initializing files" in Windows Vista Home Premium
Hi,
Anybody else encountering this issue? I noticed this7 error
in Windows Vista Home Premium. When you launch Dreamweaver CS3, it
opens the splash screen, displays “initializing files”
and thats it.
Necessary Troubleshooting steps we’re already done to
attempt to launch/fix the program but to no avails.
seems the problem happens on acer computers with 4 gigs of
ram.
You can check it from this
Thread
Thanks! I hope someone from engineering can take a look at
this issue!A little more on this topic with solution ...
http://sidapolinario.unicpinoy.com/2008/05/09/dreamweaver-cs3-some-emmerging-issues/
Regards.
Patrick. -
Local net ssh failure Tiger (PHP MYSQL Apache Dreamweaver)
I can't be sure, but I think this problem started with the latest security update. I'm 80% done with my first web application using PHP and Mysql in dreamweaver when I began getting an unknown error from dreamweaver when attempting to connect to my DB on my testing server. After 2 days of debugging and re-installing apps I finally wiped the testing server (G4 400 Cube memory topped out 120GB HD, down to the metal) reinstalled Tiger, fully patched, edited the httpd.conf file to enable php 4.4.1. Installed Mysql 4.1 (which was the last general distribution with a packaged install) and the server works fine, so I created myself as a user in mysql @localhost & @localmachinename to replicate root user. Navicat was up and running in no time, so I re-populated my server from my backup. Then I jumped over to my design workstation (G5 2Ghz Dual, 2GB Ram, 250GB HD) only to find navicat can't login to the mysql server because ssh wont connect to the G4. After much testing I discovered ALL of my macs will attach only to external addresses. My linux box, external linux boxes, even windows boxes emulating ssh will attach internally or extenally, the macs won't talk to anything in the local network 10.0.x What the ****! My project is now past due and I'm stuck because I can no longer ssh from any macs to internal machines mac or otherwise. PLEASE HELP!!! is there an SSH pakage so I can re-install? I couldn't find a mac ssh package on apple or ssh.org, Will that even make a difference? Can I uninstall the security update? Can anyone suggest a workaround?
My network
*10.0.1.2 Ganymede (Mandrivia 10 server and Gateway)
*10.0.1.6 Artemis (G5 10.4.7) Web/Video
*10.0.1.10 Miletus (G4 10.4.7) Web Testing
*10.0.1.5 Venus (G4 10.4.7) Photo editing
*10.0.1.4 Hero (G3 ibook 10.4.7) office work
*10.0.1.7 Hermes (iMac 10.4.7) iLife
*10.0.1.3 Apollo (Wintendo XP) Web Testing/The Sims
Here are several ssh logs.
mac to mac (FAIL)
Artemis:~ phil$ ssh -vv 10.0.1.10
OpenSSH_4.2p1, OpenSSL 0.9.7i 14 Oct 2005
debug1: Reading configuration data /etc/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to 10.0.1.10 [10.0.1.10] port 22.
debug1: Connection established.
debug1: identity file /Users/phil/.ssh/identity type -1
debug1: identity file /Users/phil/.ssh/id_rsa type -1
debug1: identity file /Users/phil/.ssh/id_dsa type -1
debug1: Remote protocol version 1.99, remote software version OpenSSH_4.2
debug1: match: OpenSSH_4.2 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_4.2
debug2: fd 3 setting O_NONBLOCK
debug1: An invalid name was supplied
Cannot determine realm for numeric host address
debug1: An invalid name was supplied
A parameter was malformed
Validation error
debug1: An invalid name was supplied
Cannot determine realm for numeric host address
debug1: An invalid name was supplied
A parameter was malformed
Validation error
debug1: SSH2MSGKEXINIT sent
debug1: SSH2MSGKEXINIT received
debug2: kexparsekexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-g roup1-sha1
debug2: kexparsekexinit: ssh-rsa,ssh-dss
debug2: kexparsekexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes1 92-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kexparsekexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes1 92-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kexparsekexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac- md5-96
debug2: kexparsekexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac- md5-96
debug2: kexparsekexinit: none,[email protected],zlib
debug2: kexparsekexinit: none,[email protected],zlib
debug2: kexparsekexinit:
debug2: kexparsekexinit:
debug2: kexparsekexinit: firstkexfollows 0
debug2: kexparsekexinit: reserved 0
debug2: kexparsekexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-g roup1-sha1
debug2: kexparsekexinit: ssh-rsa,ssh-dss
debug2: kexparsekexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes1 92-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kexparsekexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes1 92-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kexparsekexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac- md5-96
debug2: kexparsekexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac- md5-96
debug2: kexparsekexinit: none,[email protected]
debug2: kexparsekexinit: none,[email protected]
debug2: kexparsekexinit:
debug2: kexparsekexinit:
debug2: kexparsekexinit: firstkexfollows 0
debug2: kexparsekexinit: reserved 0
debug2: mac_init: found hmac-md5
debug1: kex: server->client aes128-cbc hmac-md5 none
debug2: mac_init: found hmac-md5
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2MSG_KEX_DH_GEXREQUEST(1024<1024<8192) sent
debug1: expecting SSH2MSG_KEX_DH_GEXGROUP
Write failed: Broken pipe
Artemis:~ phil$
Mac to linux internal (FAIL)
Artemis:~ phil$ ssh -vv 10.0.1.2
OpenSSH_4.2p1, OpenSSL 0.9.7i 14 Oct 2005
debug1: Reading configuration data /etc/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to 10.0.1.2 [10.0.1.2] port 22.
debug1: Connection established.
debug1: identity file /Users/phil/.ssh/identity type -1
debug1: identity file /Users/phil/.ssh/id_rsa type -1
debug1: identity file /Users/phil/.ssh/id_dsa type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_4.3
debug1: match: OpenSSH_4.3 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_4.2
debug2: fd 3 setting O_NONBLOCK
debug1: An invalid name was supplied
Cannot determine realm for numeric host address
debug1: An invalid name was supplied
A parameter was malformed
Validation error
debug1: An invalid name was supplied
Cannot determine realm for numeric host address
debug1: An invalid name was supplied
A parameter was malformed
Validation error
debug1: SSH2MSGKEXINIT sent
debug1: SSH2MSGKEXINIT received
debug2: kexparsekexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-g roup1-sha1
debug2: kexparsekexinit: ssh-rsa,ssh-dss
debug2: kexparsekexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes1 92-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kexparsekexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes1 92-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kexparsekexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac- md5-96
debug2: kexparsekexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac- md5-96
debug2: kexparsekexinit: none,[email protected],zlib
debug2: kexparsekexinit: none,[email protected],zlib
debug2: kexparsekexinit:
debug2: kexparsekexinit:
debug2: kexparsekexinit: firstkexfollows 0
debug2: kexparsekexinit: reserved 0
debug2: kexparsekexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-g roup1-sha1
debug2: kexparsekexinit: ssh-rsa,ssh-dss
debug2: kexparsekexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes1 92-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kexparsekexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes1 92-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kexparsekexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac- md5-96
debug2: kexparsekexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac- md5-96
debug2: kexparsekexinit: none,[email protected]
debug2: kexparsekexinit: none,[email protected]
debug2: kexparsekexinit:
debug2: kexparsekexinit:
debug2: kexparsekexinit: firstkexfollows 0
debug2: kexparsekexinit: reserved 0
debug2: mac_init: found hmac-md5
debug1: kex: server->client aes128-cbc hmac-md5 none
debug2: mac_init: found hmac-md5
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2MSG_KEX_DH_GEXREQUEST(1024<1024<8192) sent
debug1: expecting SSH2MSG_KEX_DH_GEXGROUP
Write failed: Broken pipe
mac to linux external (Success)
Artemis:~ phil$ ssh -vv 69.253.x.x
OpenSSH_4.2p1, OpenSSL 0.9.7i 14 Oct 2005
debug1: Reading configuration data /etc/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to 69.253.x.x [69.253.x.x] port 22.
debug1: Connection established.
debug1: identity file /Users/phil/.ssh/identity type -1
debug1: identity file /Users/phil/.ssh/id_rsa type -1
debug1: identity file /Users/phil/.ssh/id_dsa type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_4.3
debug1: match: OpenSSH_4.3 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_4.2
debug2: fd 3 setting O_NONBLOCK
debug1: Miscellaneous failure
No credentials cache found
debug1: Miscellaneous failure
No credentials cache found
debug1: SSH2MSGKEXINIT sent
debug1: SSH2MSGKEXINIT received
debug2: kexparsekexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-g roup1-sha1
debug2: kexparsekexinit: ssh-rsa,ssh-dss
debug2: kexparsekexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes1 92-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kexparsekexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes1 92-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kexparsekexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac- md5-96
debug2: kexparsekexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac- md5-96
debug2: kexparsekexinit: none,[email protected],zlib
debug2: kexparsekexinit: none,[email protected],zlib
debug2: kexparsekexinit:
debug2: kexparsekexinit:
debug2: kexparsekexinit: firstkexfollows 0
debug2: kexparsekexinit: reserved 0
debug2: kexparsekexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-g roup1-sha1
debug2: kexparsekexinit: ssh-rsa,ssh-dss
debug2: kexparsekexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes1 92-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kexparsekexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes1 92-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kexparsekexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac- md5-96
debug2: kexparsekexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac- md5-96
debug2: kexparsekexinit: none,[email protected]
debug2: kexparsekexinit: none,[email protected]
debug2: kexparsekexinit:
debug2: kexparsekexinit:
debug2: kexparsekexinit: firstkexfollows 0
debug2: kexparsekexinit: reserved 0
debug2: mac_init: found hmac-md5
debug1: kex: server->client aes128-cbc hmac-md5 none
debug2: mac_init: found hmac-md5
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2MSG_KEX_DH_GEXREQUEST(1024<1024<8192) sent
debug1: expecting SSH2MSG_KEX_DH_GEXGROUP
debug2: dhgenkey: priv key bits set: 130/256
debug2: bits set: 514/1024
debug1: SSH2MSG_KEX_DH_GEXINIT sent
debug1: expecting SSH2MSG_KEX_DH_GEXREPLY
debug1: Host '69.253.239.85' is known and matches the RSA host key.
debug1: Found key in /Users/phil/.ssh/known_hosts:3
debug2: bits set: 516/1024
debug1: sshrsaverify: signature correct
debug2: kexderivekeys
debug2: set_newkeys: mode 1
debug1: SSH2MSGNEWKEYS sent
debug1: expecting SSH2MSGNEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2MSGNEWKEYS received
debug1: SSH2MSG_SERVICEREQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2MSG_SERVICEACCEPT received
debug2: key: /Users/phil/.ssh/identity (0x0)
debug2: key: /Users/phil/.ssh/id_rsa (0x0)
debug2: key: /Users/phil/.ssh/id_dsa (0x0)
debug1: Authentications that can continue: publickey,password,keyboard-interactive
debug1: Next authentication method: publickey
debug1: Trying private key: /Users/phil/.ssh/identity
debug1: Trying private key: /Users/phil/.ssh/id_rsa
debug1: Trying private key: /Users/phil/.ssh/id_dsa
debug2: we did not send a packet, disable method
debug1: Next authentication method: keyboard-interactive
debug2: userauth_kbdint
debug2: we sent a keyboard-interactive packet, wait for reply
debug1: Authentications that can continue: publickey,password,keyboard-interactive
debug2: we did not send a packet, disable method
debug1: Next authentication method: password
[email protected]'s password:
debug2: we sent a password packet, wait for reply
debug1: Authentication succeeded (password).
debug1: channel 0: new [client-session]
debug2: channel 0: send open
debug1: Entering interactive session.
debug2: callback start
debug2: clientsession2setup: id 0
debug2: channel 0: request pty-req confirm 0
debug2: channel 0: request shell confirm 0
debug2: fd 3 setting TCP_NODELAY
debug2: callback done
debug2: channel 0: open confirm rwindow 0 rmax 32768
debug2: channel 0: rcvd adjust 131072
Last login: Tue Aug 15 12:56:42 2006 from artemis.ganymedia.net
[phil@ganymede ~]$
G5 Dual 2G Mac OS X (10.4.7)Mac comes with a fully functioning Apache web server with all the scripting languages (except VB). You need to enable them in the configuration file.
You need some light weight UNIX administration skills to do this. Use the system restore disk to set the password for the root account.
Open a terminal screen from the Utilities folder in Applications. Type "su", press return, then enter the root password you set using the system restore disk.
Make a backup copy of the Apache configuration file with the following command (type this in with no mistakes and press the return key).
cp /etc/httpd/httpd.conf /etc/httpd/httpd.conf.copy
Enter the following to open the Apache configuration (type this in with no mistakes and hit the return key).
/Applications/TextEdit.app/Contents/MacOS/TextEdit /etc/httpd/httpd.conf &
Locate and remove the # comment symbol from the following lines and save the file in /etc/httpd/httpd.conf.
#LoadModule php4_module libexec/httpd/libphp4.so
#AddModule mod_php4.c
Exit the TextEdit application and quit out of the terminal application.
Put the following web page into a file named greetings.php inside the folder Library/WebServer/Documents.
<html>
<head>
<title>Experiment</title>
</head>
<?php
echo "Greetings";
?>
</body>
</html>
Once you have made these changes, you can reboot to activate the changes.
Put the following into your browser to test the configuration.
http://localhost/greetings.php
You should see "Greetings" on a web page titled "Experiment".
MySQL is a separate server that you need to download and configure to complete your web server.
I hope this helps.
Best regards - Greg -
Lack of Ram and Leopard= tragic
I just got the new Leopard as an early xmas-present along with a 500GB external hard-drive and the new slim keyboard.
I currently have a iMac OS X version 10.3.9, PowerPC G4, 1.25 GHz, 256 MB, and Bus Speed: 167 MHz.
I attempted to install Leopard and when my computer restarted it wouldn't go beyond the infamous blue screen with the beach ball spinning!! I contacted tech support and they helped me get back to the original screen and suggested that I need more Ram, which makes ALOT of sense!
So here it goes I've been fishing around forums and comparing answers. I'm unsure about what to get either a 512MB or a 1GB. I've recently graduated in Graphic Design... so I basically use my Apple for everything! I love it! I use Photoshop, Illustrator, InDesign, Dreamweaver, Flash, Word, Firefox, iTunes, iPhotos, iChat and the list can go on. Please if anyone has any suggestions about which size Ram I should go for, I would really appreciate it! Thanks!
P.S I am also thinking about installing it myself, so far it looks pretty easy... (after seeing the many diagrams in the forums)Hello Greenjuju and welcome to discussions,
Have a look in this, excellent, post by Mr Totes....
http://discussions.apple.com/thread.jspa?threadID=1274834&tstart=0
Just remember to follow the instructions carefully and be very very gentle with the Mac - You will be fine.
Regards
Ian -
About Mac Pro RAM and one "Nehalem" Processor 2.8 vs 3.2
Hi,
Unfortunately I don't have so much money to spend but I find Apple products very high quality and in same time very expensive, specially for my country (Russia), according to statistic, it’s less then 1% of people that using Mac Pro in here, my country really poor :/
I never use Mac before, but I think that time is come and I would like to buy one on my birthday soon (22 November). I really tired of my crazy PC with Vista, it’s always bugs lags, and so on, it’s poor machine. I can buy new PC with i7, nice performances or buy Mac, but I think, Mac will be more quality and stable.
I'm web designer and programmer and using my PC with Adobe programs, normally Photoshop, Illustrator, Dreamweaver, very rare with After Effect (1 day per month). Sometimes I’m playing games like Dragon Age or CS:Source, Starcraft2. But I got PS3, but unfortunately it’s connected to our main home TV, and I can’t play PS3 because all day this TV watching my family :/ lol
I’m not sure if there are any way to connect PS3 to TV and computer screen at the same time… but it’s another question.
Now about Mac I'm wondering of buying cheapest Mac Pro 2010:
# One 2.8GHz Quad-Core Intel Xeon “Nehalem”
# 3GB (3x1GB)
# 1TB 7200-rpm Serial ATA 3Gb/s hard drive
# ATI Radeon HD 5770 1GB
# One 18x SuperDrive
But at the same time, I wondering about how long time I will be able to use this Mac, and enjoy it before it will come too old. Because I just can’t spend and buy Mac every 2-3 years.
I’m looking forward to use it for 4-5 years I think or so. I know it’s very hard question and I’m not really sure if it’s right to discuss it, but I’m saying just what I think.
And maybe because of this, it’s better to order processor with 3.2Ghz, and a bit more RAM (8GB (4x2GB))? What you think?
And what will be the different between this 2 processors and more RAM? Because it will be +800 USD or so, and it’s very expensive for me (pay addition 800 Dollars), I just want to ask you if it will costs this money. Unfortunately I can’t spend more money on Mac to buy 6-core Westmare and more RAM But I think cheapest Mac, for my tasks already very powerful and awesome, what you think?
And if you’ll advice me, not to pay addition 400 USD for +0.4Ghz, and the different is very little, then what you think about addition Ram for stock MAC?Thank you hatter.
I'm appreciate for your help and answer, and this amazing links! They are very helpful.
I find some interesting information. And most interesting is SSD thing. But unfortunately it's very expensive for me
I got 2 ways to go, and I really confused now. I take a look what you said, about making a PC with i7. And here is what I find on our Russian market - only 1 company which offers high quality custom PC's with up to 3 years guarantee.
What they can offer:
Price: $2060
(Basic Config: DEPO Ego Z71i)
OS:
Microsoft® Windows 7 Home Premium RUS 32-bit
or
Microsoft® Windows 7 Home Premium RUS 64-bit
MotherBoard:
*ASUS P6T, Intel®X58 chipset , DDR3, ATX*
CPU:
*Intel® Core™ i7 Processor 930 (4-Cores, 2.80GHz, 4.8 GT/s, 8Mb)*
Intel® Core™ i7 Processor 950 (4-Cores, 3.06GHz, 4.8 GT/s, 8Mb) +$365
Intel® Core™ i7 Processor Extreme Edition 980X (6-Cores, 3.33GHz, 6.4 GT/s, 12Mb) +$1150
RAM:
*3Gb DDR3-1600 Corsair Dominator, Triple Channel*
6Gb DDR3-1600 Corsair , Triple Channel +$40
12Gb DDR3-1600 Corsair , Triple Channel +$260
HDD1:
*1TB SATA hard drive (7200rpm)*
2 x 1TB SATA hard drive (7200rpm) +$80
4 x 1TB SATA hard drive (7200rpm) +$230
2 x 2TB SATA hard drive (7200rpm) +$355
4 x 2TB SATA hard drive (7200rpm) +$790
HDD2:
WD VelociRaptor 150GB, 10000rpm, 16Mb cache, SATA-II +$175
2.5" 64GB SSD SATA II +$205
WD VelociRaptor 300GB, 10000rpm, 16Mb cache, SATA-II +$285
2.5" 128GB SSD SATA II +$405
RAID:
RAID0 (required minimum 2 HDD) +$10
RAID1 (required minimum 2 HDD) +$10
Optical Drive 5.25":
*DVD±RW/CD-RW/DVD 16x4x/5xDL/16x4x/16x/48x/24x/48x*
BD-ROM&DVD RAM&DVD±R/RW, 5x/5x/12(R9 6)x/6x/12(R9 4)x/6x/12x/24x/24x/32x +$130
SuperMulti Blu-Ray ReWriter +$235
Card Reader 3.5":
*Card Reader/Writer 50 in 1 (CF/MD/SM/MS/SD/MMC)*
Video:
*ATI Radeon™ HD 5870 (1024МБ, PCI-E TV-out DVI+HDMI)*
1536MB NVIDIA GeForce 480GTX PCI-E DVI +$110
2x ATI Radeon™ HD 5850 (1024МБ, PCI-E TV-out DVI+HDMI) +$230
2x ATI Radeon™ HD 5870 (1024МБ, PCI-E TV-out DVI+HDMI) +$490
Sound:
*Realtek 7.1 (integrated)*
Creative Sound Blaster X-Fi™ Titanium Fatal1ty Champion Series +$400
Power:
*800W (12sm)*
1000W (14sm) +$50
1200W (14sm) +$55
WiFi:
*WLAN 802.11bg*
Mouse + KeyBoard: (lol)
Without mouse and keyboard -$75
Cordless Desktop® Wave Pro™ +$75
Maitance:
*1 Year*
2 Years +$10
3 Years +$20
Ok, that’s it.
DEPO - It’s our Russian company so I can’t give you link on English web page, but if you are interesting to view it, maybe with Google translate:
http://www.depo.ru/H/MDL658/1000004953/zconfigurator.aspx
And I’m not really sure, if they offer high quality components, and I can’t check it.
I just don’t want to repeat same experience like with my previous computer – I bought top computer for very high price with top components, but everything was bugging, it’s terrible, I’m working with this computer 3 years now (it’s cored 2 duo with radeon x1900 and vista :S video card - without supporting DX10-11, 2 Hdd 500Gb RAID 0, - maximum lags – I cant’ even make a diagnostics… crazy). And I’m so sad about this computer, and I don’t want to repeat same experience. That’s why I wonder about Mac Pro or any other quolity PC, but price is too high, or if I buy just normal Mac Pro:
• One 2.8GHz Quad-Core Intel Xeon “Nehalem”
• 3GB (3x1GB)
• 1TB 7200-rpm Serial ATA 3Gb/s hard drive
• ATI Radeon HD 5770 1GB
• One 18x SuperDrive
• Apple Magic Mouse
• Apple Keyboard with Numeric Keypad (English) & User's Guide
For 2499 USD, I still need to add more RAM, and It will costs 2874 USD with 8 Gb, but without changing Processor and/or HDD for SSD to speed up computer like **** and enjoy it every minute. I maximum can spend 3000-3200 USD for new computer. And all I want, to enjoy it’s stability and speed. To load photoshop in less then 5 seconds, working with AE a bit, 3dmax a bit, play a bit. Maybe I want to much :/ -
Hi, thanks for any insight you can provide:
my specs are as follows:
Macbook pro mid 2012 13.3 inch
OSX 10.8.4
2.5 ghz Intel Core i5
intel HD Graphics 4000 512 MB
10 Gb 1333 mhz ddr3 ram
500gb hdd/326 gb free
I had CS6 master collection installed on my computer up until today. I removed it because Illustrator was having a strange issue where points would snap to random nothing and, align wouldn't work and changing the stroke of an object would cause it to move down and to the left each time the stroke changed.
Illustrator issues aside, since uninstalling I can't get it to reinstall! It gives the following error:
the error summary returns this hefty chunk of text:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 25 error(s), 5 warning(s)
WARNING: DW065: Display requirements not met for {8ACD4814-788B-11E1-AC70-A860A781E0D9} Adobe Dreamweaver CS6 12.0.0.0
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
WARNING: DW029: Custom Action for payload {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 wants to skip this payload. Skipping this payload.
----------- Payload: {E1C48031-9366-427F-AC04-535CEDAAD995} Acrobat X Pro 10.0.0.0 -----------
WARNING: DW029: Custom Action for payload {E1C48031-9366-427F-AC04-535CEDAAD995} Acrobat X Pro 10.0.0.0 wants to skip this payload. Skipping this payload.
----------- Payload: {8ACD4814-788B-11E1-AC70-A860A781E0D9} Adobe Dreamweaver CS6 12.0.0.0 -----------
ERROR: DF015: Unable to delete symlink "/Applications/Adobe Dreamweaver CS6/Adobe Dreamweaver CS6.app/Contents/Frameworks/amtlib.framework/Resources"(Seq 418)
ERROR: DW063: Command ARKDeleteSymlinkCommand failed.(Seq 418)
----------- Payload: {39C9FB9C-7A84-11E1-B574-D095DF20721F} Adobe Fireworks CS6 12.0.0.0 -----------
WARNING: DF012: File/Folder does not exist at /Volumes/CS6 MstrColl/Adobe CS6 Master Collection/payloads/AdobeFireworks12-mul/OEM(Seq 3600)
----------- Payload: {76A4887E-7A85-11E1-88DE-92A96E70B8CF} Adobe Fireworks CS6_AdobeFireworks12en_USLanguagePack 12.0.0.0 -----------
WARNING: DF012: File/Folder does not exist at /Volumes/CS6 MstrColl/Adobe CS6 Master Collection/payloads/AdobeFireworks12en_USLanguagePack/OEM(Seq 84)
----------- Payload: {4817D846-700B-474E-A31B-80892B3E92E3} Adobe After Effects CS6 11.0.0.0 -----------
ERROR: DF015: Unable to delete symlink "/Applications/Adobe After Effects CS6/Adobe After Effects CS6.app/Contents/Frameworks/amtlib.framework/Resources"(Seq 1405)
ERROR: DW063: Command ARKDeleteSymlinkCommand failed.(Seq 1405)
----------- Payload: {4FAB339E-2132-434F-9376-9CD735E4C69C} Adobe Flash CS6 12.0.0.0 -----------
ERROR: DF015: Unable to delete symlink "/Applications/Adobe Flash CS6/Adobe Flash CS6.app/Contents/Frameworks/amtlib.framework/Resources"(Seq 3665)
ERROR: DW063: Command ARKDeleteSymlinkCommand failed.(Seq 3665)
----------- Payload: {AAF0D225-F129-40F2-916E-12E28DBD19ED} Adobe Illustrator CS6 Core 16.0.0.0 -----------
ERROR: DF015: Unable to delete symlink "/Applications/Adobe Illustrator CS6/Adobe Illustrator.app/Contents/Frameworks/amtlib.framework/Resources"(Seq 2135)
ERROR: DW063: Command ARKDeleteSymlinkCommand failed.(Seq 2135)
----------- Payload: {9124DF4E-617D-486B-A970-8FA632244F24} Adobe Photoshop CS6 Core 13.0.0.0 -----------
ERROR: DF015: Unable to delete symlink "/Applications/Adobe Photoshop CS6/Adobe Photoshop CS6.app/Contents/Frameworks/amtlib.framework/Resources"(Seq 524)
ERROR: DW063: Command ARKDeleteSymlinkCommand failed.(Seq 524)
----------- Payload: {327492D4-78EB-11E1-8ABE-84C55623D190} Adobe InDesign CS6 Application Base Files 8.0.0.0 -----------
ERROR: DF015: Unable to delete symlink "/Applications/Adobe InDesign CS6/Adobe InDesign CS6.app/Contents/Frameworks/amtlib.framework/Resources"(Seq 1051)
ERROR: DW063: Command ARKDeleteSymlinkCommand failed.(Seq 1051)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Flash CS6_AdobeFlash12.0-en_USLanguagePack: Install failed
ERROR: DW050: - Adobe Photoshop CS6 English Language Pack_AdobePhotoshop13-en_US: Install failed
ERROR: DW050: - Adobe InDesign CS6 Application Base Files: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe InDesign CS6 Common Language Files_AdobeInDesign8CommonLang-en_US: Install failed
ERROR: DW050: - Adobe After Effects CS6: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Flash CS6: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Illustrator CS6 Core_AdobeIllustrator16en_USLanguagePack: Install failed
ERROR: DW050: - Adobe Dreamweaver CS6_AdobeDreamweaver12en_USLanguagePack: Install failed
ERROR: DW050: - Adobe Dreamweaver CS6: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Photoshop CS6 Core: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Illustrator CS6 Core: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe After Effects CS6_AdobeAfterEffects11en_USLanguagePack: Install failed
ERROR: DW050: - Adobe InDesign CS6 Application Language Files_AdobeInDesign8AppLang-en_US: Install failed
So far this is what I have done:
uninstall everything, run the cleaner tool, reinstall- same error
uninstall, restart, run cleaner tool , restart, reinstall- same error
run cleaner tool, restart, resintall - same error
in checking the error codes individually it looked as though I might have file system errors
I rebooted with command+r and launched disk utilities from there (mac safe mode I guess?)
verified mac hdd: verified OK
ran repair anyway- verified OK again
checked and, if possible, repaired each other volume- all OK
rebooted, reinstalled, same error
I am going to address the first error now- that the display requirements were not met, and remove my external diplay from my macbook and reinstall.
Any help you might have though, I would be very grateful.oh, also, i've re-downloaded the installer and also gotten a third installer from a friend.
removing the external display did not help
Maybe you are looking for
-
Hello, always that i close and then try to open adobe muse, i got an error that says that i need the "Application Manager" to launch it, so i went to download it. After i entered in the page that it provides ( www.adobe.com/go/applicationmanager_es )
-
ITunes doesn't recognize my iPhone 4s
iTunes doesn't recognize my iPhone 4s. Whenever I plug my iPhone into my computer it starts to charge like normal but iTunes does not recognize it. I've tried all of the troubleshooting steps provided by Apple (Downloading the latest iTunes version,
-
Satellite 3000 x11 cannot use its network card
On my friend's satellite 3000 x11 I'm trying to configure it to connect to my uni halls internet, but to do that I need the MAC address. If I do ipconfig it just says "Windows IP configuration" and nothing else. If I go to device manager there's no c
-
Can anybody tell me the difference between the below 2 set of adapter parameters ? BC_http://sap.com/xi/XI/System.Call.maxConsumers 5 BC_http://sap.com/xi/XI/System.Recv.maxConsumers 5 BC_http://sap.com/xi/XI/System.Rqst.maxConsumers 5 BC_http://sap.
-
Need running java sample for sun access manager deployed on weblogic 8.1
Hi All, I have deployed amserver.war in weblogic 8.1 through amserver.war. I am able to login through user amAdmin. It's working fine. I have used file system at the time of configuration of access manager. I want to communicate with the sunaccess ma