Dreamweaver SC5 splashes the logo and disappears doenst open in windows xp platform.

How to fix this please.. unable to open Dreamweaver and Fireworks CS5

What MAY work is to Reset Preferences = Press/HOLD Ctrl+Alt+Shift while starting program

Similar Messages

Ive got this problem with itouch 4th gen when im trying to upgrade my ios to ios 6.1.3 when it is verifying it suddenly shutdown and it keeos on blinking with the logo and i cannot open it...what is the main cause of thst..tnx

ive got this problem with itouch 4th gen when im trying to upgrade my ios to ios 6.1.3 when it is verifying it suddenly shutdown and it keeos on blinking with the logo and i cannot open it...what is the main cause of thst..tnx

- Reboot the computer
- Try DFU mode and then restore/update
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Delete the update file so that new one has to be download.
IPSW file location for Mac and Windows
- Try on another computer to help determine if you have an iPod or computer problem.

My iMac will not boot past the logo and spinning gear

My iMac will not boot past the logo and spinning gear (After a Rogue Amoeba update). I can't access the recovery disk I made on a flash drive. (Am I doing it correctly? - Hold down option while switching on? It just stays on the logo). What (if anything) can I do please?

If you installed Lion onto your machine, it should have created a Recovery HD (hidden from view, but visible in Disk Utility with its Debug menu enabled, under Show all Partitions).
That article states:
Note: In order to create an external Lion Recovery using the Lion Recovery Assistant, the Mac must have an existing Recovery HD.
Would I see the recovery menu (by holding down option on power up)
Yes.
if there was no recovery disc connected do you think?
Shouldn't matter, since your int HD is always connected.

HT1208 After updating my iphone 5C, the screen was black but had the itune logo in the center, a white arrow pointing to the logo, and what seemed like a white lock, but it had a long white line leading to the bottom of phone. Phone is now frozen. What

After adding the latest update to my 5c iphone, the screen was black, with the itune logo in the center, a white arrow below it point to the logo, and below that, what seemed to be a white lock, but it had a long white line reaching the bottom of the screen. I can't get the phone to start. The white apple appears and then I get the same logo, arrow, etc. What can I do to fix this? Thanks for any assistance.

i m also put passcode in my iphone...but i dont know that how i know that my passcode is crack by someone???and same as police is not interested to find out it..
i want ma iphone backkk...........

My homepage is Google but the logo and search box seems higher on the page than normal...can I adjust the position?

I had to set the settings on Google to Do Not Use Google Instant in their search settings as no cursor was showing on the google search box. After the change it seems that the Google logo and search box seems higher on the Firefox page. I would like to be able to adjust the height of the Google logo/search box. Please tell me if I can make that adjustment.

Thank you for the information about the zoom feature on Firefox. I had found that under the View menu (although I did find it was a temporary fix and the Tools/Options/Font method does change it for a "stick") and changing the font size does increase the size and enlarges or "moves" the logo and search box on Google but that also increases the font size displayed in the search screen. I was hoping to find a way to move the Google logo and search box down on the home page a bit but not change the font size but realize that may be too fine of an adjustment. The zoom feature added to the toolbar via customization may be a good solution for me. Thank you again for your helpfulness.

HT201210 After updating my iphone. Only the logo and connect to itunes on the screen.

After updating and system restore my iphone wont open. only the logo and connect to itunes on the screen.

Hello nicolajan,
Thank you for contacting Apple Support Communities.
I see you linked here from TS1275, that is where I would recommend you starting to troubleshoot this issue. Did you follow the steps in that article? If not, here is that link again and I would recommend following all of the steps outlined there.
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/TS1275
If that doesn't resolve the issue, then you can move on to this article for more advanced troubleshooting.
Resolve iOS update and restore errors
http://support.apple.com/kb/TS3694
Regards,
Jeff D.

In the Dreamweaver brim Bindings, the recordset and all of the fields of the table are not EXHIBITED

In the Dreamweaver brim Bindings, the recordset and all of the fields of the table are not EXHIBITED. I don't know if an option of configuration adjustment exists in Dreamweaver that corrects the problem. It is Dreamweaver CS4 - Version 10.0 build 4117.

I have traced the problem to a corrupted profile. When I captured the images in question, I also used Color Cherckr to create a profile for processing. When I apply that profile to the adjustments I make, I can no longer "Edit In". If I use another profile, even one that I created using Color Checkr at a different point in time, I don't have the issue. Something seems to have corrupted the new profile. I will re-create the profile and see if the issue is resolved.

System does not show the logo and header

Hi,
My system doesn't show the header & Logo in ALV Grid Report. Other system showed that report Properly. Please Clarify.

DATA : head1   TYPE slis_listheader,
      head2 TYPE slis_t_listheader.
form head.
head1-typ = 'H'.
head1-info = 'REPORT Check'.
APPEND head1 TO head2.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary       = head2
      i_logo                   = 'ENJOY_SAP_LOGO'
I_END_OF_LIST_GRID       = ''
endform.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
      i_callback_program                = sy-repid
      i_callback_top_of_page            = 'head' .
the above report does not display the SAP logo and header info. please help. the same report is display the logo and info. in other system. Please clarify.
Edited by: bala on Dec 8, 2008 10:44 AM

My I pod touch has the logo and busy sign and is frozen please help

My I pod touch has the logo and busy sign and is frozen please help
Cheers Allan

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I was restoring my iTouch and accidentally unplugged it and now it is stuck at the logo and loading bar under it. I can't go into DFU because the home button doesn't work.

I was restoring my iTouch and accidentally unplugged it and now it is stuck at the logo and loading bar under it. I can't go into DFU because the home button doesn't work. How can I fix it?

- See if placing the iPod in recovery mode with this program will allow a restore.
RecBoot: Easy Way to Put iPhone into Recovery Mode
- Next let the battery fully drain. After charging for at least an hour try again.

My iPod touch was frozen for a several hours and whe i hooked it up to iTunes, it has the USb cable and iTunes logo. ITunes says i need to unlock my iPod, but i can't do that if it has the logos and stuff...what do i do?

my iPod touch was frozen for a several hours and whe i hooked it up to iTunes, it has the USb cable and iTunes logo. ITunes says i need to unlock my iPod, but i can't do that if it has the logos and stuff...what do i do?

See Here
http://support.apple.com/kb/HT1808

I have a iMac (20-inch, Mid 2009). On start up It will sit at the White screen with the logo and the wheel that spins under it. It will not go past this point? Any ideas?

I have a iMac (20-inch, Mid 2009). On start up It will sit at the white screen with the logo and the wheel that spins under it. It will not go past this point? Any ideas?

Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

My imac desktop wont boot up there is the logo and the timer pls help

my imac desktop wont boot up there is the logo and the timer pls help

What model iMac do you have and what operating system are you running? By Timer are you referring to a progress bar?
Mac OS X: Gray screen appears during startup - Support - Apple
Resolve startup issues and perform disk ... - Support - Apple

Apple logo and menu no longer come up when turning on my 2nd gen nano. However, if I just hit the right buttons the songs play and it runs normally. On occasion the logo and menu come on but it is now in chinese. Should I restore or Junk?

Apple logo and menu no longer come up when turning on my 2nd gen nano. However, if I just hit the right buttons the songs play and it runs normally. On occasion the logo and menu come on but it is now in chinese. Should I restore or Junk?

See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

TS3276 An email sent from my iMac has a button linked to a clip hosted on Vimeo. When received, the link functions on iMac and iPad, but opens a window of app icons on iPhone and iPod touch. Any ideas what's wrong?

An email sent from my iMac has a button linked to a clip hosted on Vimeo. When received, the link functions on iMac and iPad, but opens a window of app icons on iPhone and iPod touch. Any ideas what's wrong?

For anyone else reading this thread, it is worth knowing that sometimes an email is, or can be, corrupted thereby jamming the works. The solution above is good, but I just wanted to suggest another one.
If the problem arises, go to an online mail access service, such as Mail2Web.com and login to you mail account there and delete the offending message.
Problem solved.
And George, as this is all entirely voluntary, whinging about no takers may not endear people to you. Besides which, a few minutes of searching on Google would have found you a number of solutions.

Dreamweaver SC5 splashes the logo and disappears doenst open in windows xp platform.

Similar Messages

Maybe you are looking for