Dreamweaver template attach error

Hello all,
I have several different pages reading from the same template
file which is located in the templates folder with the website
directory. After i have modified the template file to how i need, i
then inturn proceed to update it on the other pages but this is
when the error occurs. I open up the index file and go to modify
}}} templates }}} update current page, then the error message i
recieve is ((error accessing file "templates`web-data-2006.dwt";
bad file path (error code 3) )) does anyone know what this means or
know how i can fix this??? The link to the file seems to be fine as
does the name of the file
Any suggestions would be much appreciated.
Regards
Pokerflat

Show us the page, please.
You are doing this inside of DW, right? And the Template is
in the
Templates folder that is in the root of the current site,
right?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"pokerflat" <[email protected]> wrote in
message
news:evh99l$q65$[email protected]..
> Hello all,
>
> I have several different pages reading from the same
template file which
> is
> located in the templates folder with the website
directory. After i have
> modified the template file to how i need, i then inturn
proceed to update
> it on
> the other pages but this is when the error occurs. I
open up the index
> file and
> go to modify }}} templates }}} update current page, then
the error message
> i
> recieve is ((error accessing file
"templates`web-data-2006.dwt"; bad file
> path
> (error code 3) )) does anyone know what this means or
know how i can fix
> this??? The link to the file seems to be fine as does
the name of the file
>
> Any suggestions would be much appreciated.
>
> Regards
>
> Pokerflat
>

Similar Messages

Dreamweaver Template Error: Error reading file (Site Location/info) returned incomplete data

Hello!
I am working on new website we are creating for our company. I have never really had any Dreamweaver template file errors before...so this one has me really stumped! We purchased the site files from Template Monster and I have contacted their tech support, but I have not had much luck with them.
I started out by creating the Dreamweaver template folder that includes the template files that I would like to use. I started creating some pages using the template. I placed all the html pages in the main folder of the website. When I go to update the template to those pages I get the following error: "Error reading file (Site Location\Folder name\Dreamweaver template name) returned incomplete data".
I am not sure what I am doing wrong. Any help and advice would be greatly appreciated!
The site is a CSS based site with a Flash navigation menu. Since it is in the production phase, I do not yet have it placed on a server so you can take a look at it at this time (although if really needed and we cannot find an answer, I may be able to get the test site on line - if someone thinks they can help me answer this problem by viewing the site). Right now the site is housed in the same place we house all of the other sites we have produced and all of our other templates on our other websites work just fine. The main difference with this site is that we did purchase files from Template Monster to help speed us along during the construction of the page structures and also this site has a Flash Navigation Menu and a few other Flash elements (something our other sites do not really have).
I am using Abobe Dreamweaver CS5 and Windows 7
Thanks again for taking the time to help find and answer to this problem!
-J

I am curious as to why no one likes them around here.
They have spammed these forums in the past.
The code on their pages is rarely 'best-practice' code.
There are much better choices available.
My co-worker and I have to share the files, since we are editing the site together. The files are not local on our computers, but on the company's f drive that have Novell on it.
This arrangement is a recipe for disaster. The correct way to collaborate on a site with a colleague is with the following setup:
Each of you must have a LOCAL site (local to your workstation)
You would use a single remote location as a staging area, so each of you would have a site definition that specifies your own workstation for the local site, and the same network shared location as the Remote site
You will both need to enable Check In/ Check Out
You will both have to agree to PLAY BY THE RULES!
One (or both) of you will also need to have a second site defined that has the staging server as the local root folder, and would have the PRODUCTION server as the remote site. I'll explain how to use this site soon.
When you use CI/CO, your 'gold-standard files' are on the staging server. To begin working, you would connect to the staging server, and double click on a file, which will a) fetch the file from the staging server to your local site, and b) CHECK OUT the file to you. As long as you have the file checked out, it cannot be edited by your colleague. When you are done with your edit, you would CHECK IN the file (which uploads it to the staging server). It can now be edited by your colleague.
When you add templates to this scenario, things get even more complicated, although manageable. If you ever need to make a change to a template you must use the following procedure:
ALL FILES MUST BE CHECKED IN - this includes both you and your colleague.
One of you would connect with the SECOND SITE, open and edit the template, and save it propagating the changes to all "LOCAL" files (i.e., on the staging server).
Each of you would then need to return to the FIRST SITE, and again check out any files you want to work on.
When changes are done, and files are ready to publish, connect to the SECOND SITE, and upload the files from STAGING to PRODUCTION.
Does that make sense? It's important that it does.
I need to add in one more tab/link to the Flash nav bar.
Using Flash for navigation is a VERY POOR CHOICE, unless you also have redundant, text-based navigation on the pages. By using Flash to navigate, you guarantee: a) your pages will not be spiderable by search engines, b) your pages will not be navigable by iPlatforms, and c) your pages will be inaccessible to anyone browsing with screen assistive devices. Someone is making bad decisions about this site, in my opinion.

Dreamweaver Templates and Include files

Hi,
I am using dreamweaver templates so that my users can create
new pages on our Intranet using Contribute.
When I create a template and try and use an inculde file for
the menu systems I get an error. I am trying to use the following
code to inculde the asp file:

And I get the following error when saving the template:
Unbalanced body tag
I have checked and I definetly have opening and closing body
tags in the HTML. So I am wondering whether the error is caused by
the fact that the file is a dwt and not as asp.
So, is there anyway of using include files in a dreamweaver
template?
Thanks in advance for any help.

That's the wrong syntax for a file include. It should be
either of these -

or

Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Alan" <[email protected]> wrote in
message
news:C568040E.31895D%[email protected]..
>
>
>> 
>>
>> And I get the following error when saving the
template:
>>
>> Unbalanced body tag
>>
>> I have checked and I definetly have opening and
closing body tags in the
>> HTML.
>
> Is the include file JUST the html that would be correct
syntax for where
> it
> is used in the main file?
>
> In other words- included files should not be complete
html docs with their
> own head and body tags. That would result in multiple
head and body tags
> in
> the assembled files.
>
>
> --
> Alan
> Adobe Community Expert, dreamweaver
>
>
http://www.adobe.com/communities/experts/
>
>
>

Dreamweaver Template Issues

Heyyy,
I have been trying to set up some Dreamweaver Template files.
I have defined an editable region for the content to go in, I then create a new file using this template and start editing the page. However when I put in too much content, the editibale region doesnt flow or stretch its height to match the content. (I have attached a screenshot of DW to show that the design looks fine, but you can tell that the content overflows the editable region guidelines)
This isn't a problem in any browser apart from IE7 (which I have attached a screenshot of to show you what is happening) where the content doesn't display properly.
I was just wondering if anyone might know how to correct this issue? If I need to provide any more details, code or screenshots it would be great if you could let me know. And thanks for any help offered!
Cheers,
Ezra

Ezra-The best thing you can do to get help on this is put that page out there on a web server and provide a link. That will give the very helpful people here all the resouces needed to view what might be causing your problem. If you don't do this, it's just a guessing game that really nobody wants to play.

Dreamweaver Template & Javascript

I have a Dreamweaver template with this script:
<SCRIPT type="text/javascript">

</SCRIPT>
When I create a new htmlpage & attach the template, the
new page has extra code in my script! The last function turns out
like this:
function randomImages(){
if(counter == (imgs.length)){
counter = 0;
MM_swapImage('rotator', '', imgs[counter++]imgs);
function randomImages(){
if(counter == (imgs.length)){
counter = 0;
MM_swapImage('rotator', '', imgs[counter++]);
setTimeout('randomImages()', delay);
How can I stop this from happening? It breaks my new page
every time!
Thanks for any ideas,
nicki

Upload the template file and post a link to it, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"akmagnolia" <[email protected]> wrote in
message
news:[email protected]...
>I have a Dreamweaver template with this script:
>
>
> -----------------------
> <SCRIPT type="text/javascript">
> 
> </SCRIPT>
>
>
> ----------------------------------
>
> When I create a new htmlpage & attach the template,
the new page has extra
> code in my script! The last function turns out like
this:
>
>
> -------------------------------
> function randomImages(){
> if(counter == (imgs.length)){
> counter = 0;
> }
> MM_swapImage('rotator', '', imgs[counter++]imgs);
> }
> }
>
> function randomImages(){
> if(counter == (imgs.length)){
> counter = 0;
> }
> MM_swapImage('rotator', '', imgs[counter++]);
> setTimeout('randomImages()', delay);
> }
>
>
> --------------------------
>
> How can I stop this from happening? It breaks my new
page every time!
> Thanks for any ideas,
> nicki
>
>

Dreamweaver template declaration affects Google Map loading

My Dreamweaver Template declaration statement

is preventing a Google Map from loading. It works fine in IE and Firefox, but not in Safari and Chrome. The weird thing is, if I move it above the following declaration is works fine.
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
Dreamweaver inserts and locks this code so the only way I get it to work is to either detach it from the template completely or edit the code in a text editor before upload. I need a different fix. I'm hoping that there is actually other code in my page that is leading to the declaration problem although it seems unlikly.
For reference here is the html that calls the map
<a href="javascript:;" class="content" title="Location Map" onclick="mopen('map1');loadScript();return false">Location Map</a></p>
                  <div id="map1" style="visibility:hidden;"> <span class="content"><a href="javascript:;" class="closemap" onclick="mclose('map1')" title="Close Map">Close</a> </span>
                    <div id="googlemap1"> </div>
                  </div>
For the code or to see for yourself go to http://www.outbackadventures.com/trips_classes/kayaking/kayak_classes/intro_paddling/index 2_3.html
Any help would be much appreciated. Thanks.

The problem has been solved. It seems that Google Chrome and Safari do not entirely ignore comment tags such as Dreamweaver's template declaration.
In my "lazy load" Google Map code taken from a Google employee suggestion
http://groups.google.com/group/Google-Maps-API/msg/4e2acbe1ca7f0324
Example at http://imagine-it.org/google/gmaps-samples/dynamicloading.html
there is this line of code
document.documentElement.firstChild.appendChild(script);
As I understand it Chrome and Safari may read the Dreamweaver template comment

as the first.Child and therefore results in invalid html causing an error and no loading of the script.
This was solved by the help of folks at this post:
http://groups.google.com/group/google-maps-api/browse_thread/thread/101bc4c59d098367/0decf 0c096119f82#0decf0c096119f82
Essentially the code above needs to be modified so that it reads from the head section rather than from above it. To fix this, replace the above code with either one of the following lines:
document.getElementsByTagName(\"head\")[0].appendChild(script);
document.documentElement.getElementsByTagName(\"head\")[0].appendChild(script);

Dreamweaver templates' regions and AllWebMenus linking code

Hi,
I am thinking of using AllWebMenus (the menu-making program) in a site based on a DW template that I'll create. If anyone uses AllWebMenus together with DW I'd be grateful for an answer.
I was wondering what is best practice in the case of Dreamweaver templates, in which you stipulate editable areas and the remainder are non-editable areas. I understand that AllWebMenus will place the menu-linking code immediately after the <body> tag.
Should I make sure that the area of the page code immediately after the <body> tag is an editable area of the template?
I suppose that Dreamweaver would not like it if the linking code for AWM were part of a “non-editable” part of any page’s code that had been created from the template?
I would be positioning the menu relative to an element (to a <div> tag at the top of the page). When the menu is set up and ready to compile, is there a way of knowing how many pixels wide and deep (in the case of a horizontal menu) the end-result menu will be, so that I can set the pixel dimensions of the <div> accordingly (and the width of the page’s overall content container), so that the menu, in its unclicked state, will not hide my text or page elements that should appear immediately underneath it, and so that the menu won’t exceed the width of the overall container?
Thank you...

That's the wrong syntax for a file include. It should be
either of these -

or

Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Alan" <[email protected]> wrote in
message
news:C568040E.31895D%[email protected]..
>
>
>> 
>>
>> And I get the following error when saving the
template:
>>
>> Unbalanced body tag
>>
>> I have checked and I definetly have opening and
closing body tags in the
>> HTML.
>
> Is the include file JUST the html that would be correct
syntax for where
> it
> is used in the main file?
>
> In other words- included files should not be complete
html docs with their
> own head and body tags. That would result in multiple
head and body tags
> in
> the assembled files.
>
>
> --
> Alan
> Adobe Community Expert, dreamweaver
>
>
http://www.adobe.com/communities/experts/
>
>
>

I am getting the attached error while bringing up the Prcs Scheduler

I am getting the attached error while bringing up the Prcs Scheduler:
Cannot open message catalog TMADMIN_CAT
Starting Process Scheduler Server PSNT for Database FSUAT ...
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 752; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
INFO: BEA Tuxedo, Version 8.1, 32-bit, Patch Level 192
NLS:4: Cannot open message catalog LIBTUX_CAT, set 1, num 1571; check TUXDIR=C:\
bea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog LIBTUX_CAT, set 1, num 1570; check TUXDIR=C:\
bea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 793; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
exec BBL -A :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUX
DIR=C:\bea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 801; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
exec PSDSTSRV -p 1,600:1,1 -sPostReport -- -C psprcs.cfg -CD FSUAT -PS PSNT -A s
tart -S PSDSTSRV :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 1685; check TU
XDIR=C:\bea\Tuxedo8.1, LANG=English_United States.1252
tmboot: NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 827; check TUX
DIR=C:\bea\Tuxedo8.1, LANG=English_United States.1252
tmshutdown -y
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 753; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 916; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 907; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 936; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 948; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 775; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
Please advise, thank you

Is that ever running ? Where/how did you installed tuxedo ? Which OS user was used for tuxedo install ?
Nicolas.

"Template import error: No VM configure file found" on brand new setup

Previously, I posted Console does not launch OVM 3.1.1, Win7x32 Firefox15/IE8 - Empty .jnlp file which was about VM Console not launching. Since this is a new installation, and it seemed to be a unique problem, I scratched the whole installation and started again from scratch. Everything, including the NFS file server, was re-installed from scratch CD OS installation.
The process is pretty straightforward once you're used to it, and in less than three hours I was ready again to import my first template (a template I had imported before). But now, I submit the the request, and almost immediately the process aborts. (You can see in the information below, that 1 second passes between the Import request (06:32:36) and the failure.)
Thing is, it takes about three minutes, even locally on the web server, to get an index of that large file (tar tzf), and at completion, the vm config file is listed.
Am I misreading the error? My web searches for enlightenment found only one good hit on this error, and in that case it appeared to be an "out of space" issue. In this case, though, I'm importing a 5GB tarfile into a 390GB, otherwise-empty file system, so I don't think that is the issue. The failure in ovs-agent.log is below. What other information may I provide to get to the bottom of this? (Thanks for any guidance/help, of course!)
[2012-10-31 06:31:40 3341] DEBUG (monitor:36) Cluster state changed from [Heartbeating] to [DLM_Ready]
[2012-10-31 06:31:40 3341] INFO (notification:67) Notification sent: {CLUSTER} {MONITOR} Cluster state changed from [Heartbeating] to [DLM_Ready]
[2012-10-31 06:31:40 3338] INFO (notification:193) Sending notification: {CLUSTER} {MONITOR} Cluster state changed from [Heartbeating] to [DLM_Ready]
[2012-10-31 06:31:48 4914] DEBUG (service:77) discover_cluster: ()
[2012-10-31 06:31:48 4914] DEBUG (service:85) discover_cluster: call completed.
[2012-10-31 06:32:03 4926] DEBUG (service:77) storage_plugin_mount: ('oracle.generic.NFSPlugin.GenericNFSPlugin', {'status': '', 'admin_user': None, 'admin_host': None, 'uuid': '0004fb00000900003cf41964f3476788', 'total_sz': 0, 'admin_passwd': '******', 'storage_desc': '', 'free_sz': 0, 'access_host': 'filesrv.ps.***.com', 'storage_type': 'FileSys', 'alloc_sz': 0, 'access_grps': [], 'used_sz': 0, 'name': '0004fb00000900003cf41964f3476788'}, {'status': '', 'uuid': 'fc3564eb-ce8b-489c-96bc-df6de2cc8a11', 'ss_uuid': '0004fb00000900003cf41964f3476788', 'size': '330279518208', 'free_sz': '330075340800', 'state': 2, 'access_grp_names': [], 'access_path': 'filesrv.ps.***.com:/mnt/ps_big/repo/repo', 'name': 'nfs:/mnt/ps_big/repo/repo'}, '/OVS/Repositories/0004fb0000030000659e0ce6f2ecfb55', None, True, [])
[2012-10-31 06:32:03 4926] INFO (storageplugin:108) storage_plugin_mount(oracle.generic.NFSPlugin.GenericNFSPlugin)
[2012-10-31 06:32:03 4926] DEBUG (NFSPlugin:353) cmd = ['mount', '-t', 'nfs', 'filesrv.ps.***.com:/mnt/ps_big/repo/repo', '/OVS/Repositories/0004fb0000030000659e0ce6f2ecfb55']
[2012-10-31 06:32:03 4926] DEBUG (service:85) storage_plugin_mount: call completed.
[2012-10-31 06:32:03 4931] DEBUG (service:77) add_repository: ('filesrv.ps.***.com:/mnt/ps_big/repo/repo', '0004fb0000030000659e0ce6f2ecfb55')
[2012-10-31 06:32:03 4931] DEBUG (service:85) add_repository: call completed.
[2012-10-31 06:32:36 4972] DEBUG (linux:847) async call function: import_template
[2012-10-31 06:32:36 4975] DEBUG (service:77) import_template: ('0004fb0000030000659e0ce6f2ecfb55', '0004fb0000140000fdc18a572a244015', ['http://aspire/pstop/OVM_EL5U7_X86_64_TOOLS8_52_06_PVM.tgz'])
[2012-10-31 06:32:37 4975] INFO (notification:74) async_proc_prog: notification {ASYNC_PROC} progress PID 4975 status {'OBJECT': 'template', 'TOTAL_OBJECT_COUNT': 1, 'CURRENT_OBJECT_COUNT': 1, 'TOTAL_BYTES': 0L, 'CURRENT_BYTES': 613L, 'OPERATION': 'download'}
[2012-10-31 06:32:37 4975] INFO (notification:67) Notification sent: {ASYNC_PROC} progress PID 4975
[2012-10-31 06:32:37 3338] INFO (notification:193) Sending notification: {ASYNC_PROC} progress PID 4975
[2012-10-31 06:32:37 4975] ERROR (service:96) catch_error: Template import error: No VM configure file found.
Traceback (most recent call last):
File "/usr/lib64/python2.4/site-packages/agent/service.py", line 94, in wrapper
return func(*args)
File "/usr/lib64/python2.4/site-packages/agent/hypervisor/xenxm.py", line 1041, in import_template
raise RuntimeError('Template import error: %s' % err)
RuntimeError: Template import error: No VM configure file found.
[2012-10-31 06:32:37 4975] DEBUG (linux:879) ovs_async_proc: pid 4975 status 1 output Template import error: No VM configure file found.
[2012-10-31 06:32:37 4975] INFO (notification:67) Notification sent: {ASYNC_PROC} exit PID 4975
[2012-10-31 06:32:37 3338] INFO (notification:193) Sending notification: {ASYNC_PROC} exit PID 4975
[2012-10-31 06:32:39 4987] DEBUG (service:77) storage_plugin_listFileSystems: ('oracle.generic.NFSPlugin.GenericNFSPlugin', {'status': '', 'admin_user': None, 'admin_host': None, 'uuid': '0004fb00000900003cf41964f3476788', 'total_sz': 0, 'admin_passwd': '******', 'storage_desc': '', 'free_sz': 0, 'access_host': 'filesrv.ps.***.com', 'storage_type': 'FileSys', 'alloc_sz': 0, 'access_grps': [], 'used_sz': 0, 'name': '0004fb00000900003cf41964f3476788'}, True)
[2012-10-31 06:32:39 4987] INFO (storageplugin:108) storage_plugin_listFileSystems(oracle.generic.NFSPlugin.GenericNFSPlugin)
[2012-10-31 06:32:39 4987] DEBUG (NFSPlugin:142) ENTER: listFileSysytems()
[2012-10-31 06:32:39 4987] DEBUG (NFSPlugin:257) EXIT : listFileSysytems()
[2012-10-31 06:32:39 4987] DEBUG (service:85) storage_plugin_listFileSystems: call completed.
[2012-10-31 06:32:39 5005] DEBUG (service:77) discover_pool_filesystem: ()
[2012-10-31 06:32:39 5005] DEBUG (service:85) discover_pool_filesystem: call completed.

How did you get the template to where you staged it?
I'd say the template is corrupt or you only have a partial template.
I did notice the call to the template is based on the short name of the host. Can you confirm the VM manager can access the http path via short name?

Dreamweaver Template Without Dreamweaver

Hi.
I'm doing an internship for the semester and the place i work is having me redesign their intranet. I'll be gone in December, and while no immediate changes will really need to be made, over time they will probably want to do something such as adding a link in the side menu...
The problem is, I don't think they use Dreamweaver--if they're using another web design program, is it possible for them to edit the dreamweaver template I've created for them?
Thanks.

Another approach is to use Server-Side Includes (text files) that contain hyperlinks, common headers & footers for example. Person responsible for updates could edit the SSI files in any html editor. Upload to server and the server would populate changes throughout the site.
More on SSIs:
http://www.smartwebby.com/web_site_design/server_side_includes.asp
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

Edit First line in dreamweaver templates

Hello,
When I create a page from a Dreamweaver template, a
dreamweaver comment similar to the one below will be inserted:

Each time I edit a page to add php code in the very first
line, it is removed with every template update and the source code
again starts with the dreamweaver comment. I need to add to all my
pages a php code in the very first line like this one:
<? $ob_start; $session_start; ?>
How can I do that without removing the code from my pages
with each template update. Another problem is that I can't insert a
placeholder in the very first line of a dreamweaver template. Above
that the first line is locked in dreamweaver, so that I can't
change it manually. Is there any workaround available?
Thanks,
Philip

> How can I do that without removing the code from my
pages with each
> template
> update. Another problem is that I can't insert a
placeholder in the very
> first
> line of a dreamweaver template. Above that the first
line is locked in
> dreamweaver, so that I can't change it manually. Is
there any workaround
> available?
Put the code ABOVE the <html> tag.
Which DW are you using? It looks like DW4 or earlier....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"flip3" <[email protected]> wrote in message
news:ec40u0$mr3$[email protected]..
> Hello,
>
> When I create a page from a Dreamweaver template, a
dreamweaver comment
> similar to the one below will be inserted:
>
> 
>
> Each time I edit a page to add php code in the very
first line, it is
> removed
> with every template update and the source code again
starts with the
> dreamweaver comment. I need to add to all my pages a php
code in the very
> first
> line like this one:
>
> <? $ob_start; $session_start; ?>
>
> How can I do that without removing the code from my
pages with each
> template
> update. Another problem is that I can't insert a
placeholder in the very
> first
> line of a dreamweaver template. Above that the first
line is locked in
> dreamweaver, so that I can't change it manually. Is
there any workaround
> available?
>
> Thanks,
>
> Philip
>

Flash banner in a Dreamweaver Template

Hi all,
I am using one of the provided Dreamweaver Templates (CSS).
All is fine, except that for some reason it does not like Flash
imports. I can alter the template as much as I like and it will
always successfully change across the site, BUT if I try to insert
a Flash movie/banner into the template - then it does not appear of
ANY of the site files. The only way I can see the flash banner, is
if I open the template.php file in a browser - then you can see
that it is in fact there and working - but for some reason the
other pages refuse to acknolwegde it. Images / Tables / Text - all
work fine - just not flash banners. I even tried saving the banner
as a JPG file in Flash, then sticking the JPG file in the template
where the banner should - and it worked perfectly, but as a .swf
extension it fails.
Am I missing something?
Nathan

> BUT if I try to insert a Flash movie/banner into the
template - then it
> does not appear of ANY of the site files.
Because of the active content .js fix, when you insert a .swf
file into a
template, you must use a Site Root relative path for it.
Open the .dwt template file.
Double-click on the .swf in design view- the "browse to file"
dialog box
should come up showing the currently selected file.
look in the bottom of that dialog box for the pulldown to
change from
document relative path to site root relative path. Change it
to site root.
click okay and save the file, and let changes propagate.
does it show in the child files now?
[note- It may still not show during local preview because
site root relative
paths in javascript will not make any sense during local
preview- they
should work fine on the remote host if the site has it's own
domain name
though]
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Dreamweaver Templates with Web Gallery

I have built a site in dreamweaver CS4 I have used a Dreamweaver Template for my pages. Rather than clog my pages up with images I used Adobe Bridge to create a web gallery, It created a gallery ok and I saved it to my hard drive. It created two items, a resourses folder and an "index" file. So I I copied and pasted the two items into my Dreamweaver folder I created and called SS_Bridge. I pointed a link I created to point to the "index" file within the SS_Bridge Folder in Dreamweaver, Will this create a problem as there will be two "Index" files within my site
jjrutter

The "home" page index file would be at the root level of the site. Other folders within the root can all have their own index (default) files.

NEW! Free Dreamweaver templates WITH Fireworks vector files

I just released some free Dreamweaver templates that include
not only the Dreamweaver template dwt file, but also the original
pre-sliced Fireworks file with all the template graphics.
The templates include the dwt, Fireworks file, pure CSS
menus, are AdSense-ready, XHTML 1.0 valid and are very customizable
through both the Fireworks file and the CSS.
If you use one, let me know so I can get a screenshot and
post a link to your site showing how the templates have been
customized by various designers.
Cheers!
Brodit

Can you post a link to the PHP page, please? This will allow
me to see the
HTML markup on it....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Mr Zedd" <[email protected]> wrote in
message
news:eviqn8$ntm$[email protected]..
> Hello everyone,
>
> I have been given an exisiting website to update that
uses Dreamweaver
> templates.
>
> I have made the changes successfully within the
content.dwt file, saved
> it,
> and then uploaded both the new content.dwt file and the
related *.htm
> pages
> that were linked to it.
>
> After going to the website to double check the new pages
I found a *.php
> file
> that uses the same template, content.dwt, but it never
asked to update
> that
> particular file.
>
> So, I opened the *.php file in Dreamweaver and tried to
apply changes from
> the
> content.dwt file to it using: Templates - Update current
page, but no such
> luck. Since there is no code at the start of this file
like the other
> *.htm
> files how do I "connect" it with the newly updated
template. I tried
> making a
> small change on the content.dwt file so see what files
would come up in
> the "do
> you wish to update..." list but for some reason the
*.php file is not
> there.
>
> Perhaps the answer is fairly obvious to someone who has
worked with
> Templates
> a lot but since I have just started working with
templates I still have a
> large
> knowledge gap in this area.
>
> Any help would be appreciated.
>
> Many thanks
>
> Mr Zedd
>

DreamWeaver Template change not updating children webpages?

Hi Group,
Sorry for my newbie question here.
I loaded an HTML webpage, and saved it out as a DreamWeaver Template file.
I then created webpages from the template file (( File - New - Page From Template - Site - Template), and made sure that the "Update Page when Template Changes" check box was selected/checked.
I then created several chldren webpages, and saved them as .html files.
I decided to change the navbar system - part of the uneditiabel region in the template - by opening the template file and edit-ing that file, and then saving it as the same DreamWeaver template file.
However, the webpages did Not Update to reflect the navbar changes in the template fle !??!???
Can someone tell me what I'm doing wrong?
I believe it is something that I'm doing incorrectly with DreamWeaver ..
Here is the HTML if anyone is interested.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>

<title>CNC Joe's WorkShop - - Home Page </title>

<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
   <link href="../style.css" rel="stylesheet" type="text/css" media="screen" />

<meta http-equiv="X-UA-Compatible" content="IE=8" />

<link rel="stylesheet" type="text/css" media="screen,projection" href="../style.css" />
</head>

<body>
<div id="wrapper">
<a name="top"></a>
<a href="index.html" target="_self" title="CNC-Joe's Home Page" >
<img src="../joesworkshoplogo.gif" width="770px" height="300px" alt="CNC Joe's WorkShop - Home Page" />
</a>



<div class="mainmenu">
<ul>
      <li class="li_nc"><a href="index.html" target="_self" >Home</a></li>
      <li class="li_hc"><a href="cad.html" target="_self" >CAD</a><ul class="ul_ch">
         <li class="li_nc"><a href="cad_intellicad.html" target="_self" >IntelliCAD</a></li>
         <li class="li_nc"><a href="cad_draftsight.html" target="_self" >DraftSight</a></li>
         <li class="li_nc"><a href="cad_progesoft.html" target="_self" >Progesoft</a></li>
      </ul></li>
      <li class="li_hc"><a href="cam_html" target="_self" >CAM</a><ul class="ul_ch">
         <li class="li_nc"><a href="cam_mach3.html" target="_self" >Mach3</a></li>
         <li class="li_nc"><a href="cam_vcarve.html" target="_self" >V-Carve</a></li>
         <li class="li_nc"><a href="cam_cut3d.html" target="_self" >Cut 3D</a></li>
         <li class="li_nc"><a href="cam_bobcadcam.html" target="_self" >Bob-CAD-CAM</a></li>
         <li class="li_nc"><a href="cam_meshcam.html" target="_self" >Mesh CAM</a></li>
         <li class="li_nc"><a href="cam_deskcnc.html" target="_self" >Desk CNC</a></li>
      </ul></li>
      <li class="li_hc"><a href="projects.html" target="_self" >Projects</a><ul class="ul_ch">
         <li class="li_nc"><a href="projects_zzeroplate.html" target="_self" >Z Zero Plate</a></li>
         <li class="li_nc"><a href="projects_x0y0edgefinder.html" target="_self" >X0-Y0 Edge Finder</a></li>
         <li class="li_nc"><a href="projects_digitizingtouchprobe.html" target="_self" >Digitizing Touch Probe</a></li>
         <li class="li_nc"><a href="projects_millwebcam.html" target="_self" >Mill Web CAM</a></li>
         <li class="li_nc"><a href="projects_laseredgefinder.html" target="_self" >Laser Pointer Edge Finder</a></li>
         <li class="li_nc"><a href="projects_davidlaserscanner.html" target="_self" >David Laser Scanner</a></li>
      </ul></li>
      <li class="li_hc"><a href="reference.html" target="_self" >Reference</a><ul class="ul_ch">
         <li class="li_nc"><a href="ref_gcodes.html" target="_self" >G-codes</a></li>
         <li class="li_nc"><a href="ref_nema.html" target="_self" >NEMA Motor Info</a></li>
         <li class="li_nc"><a href="ref_vbearings.html" target="_self" >V-Bearings</a></li>
         <li class="li_nc"><a href="ref_linearguides.html" target="_self" >Linear Guides</a></li>
      </ul></li>
      <li class="li_hc"><a href="offtopictopics.html" target="_self" >Off-Topic Topics</a><ul class="ul_ch">
         <li class="li_nc"><a href="ott_backyardfoundry.html" target="_self" >BackYard Foundry</a></li>
         <li class="li_nc"><a href="ott_blacksmithing.html" target="_self" >BlackSmithing</a></li>
      </ul></li>
      <li class="li_nc"><a href="links.html" target="_self" >Links</a></li>
      <li class="li_nc"><a href="contact.html" target="_self" >Contact</a></li>
</ul>
</div>





<h2>Projects: Digitizing Touch Probe:</h2>
<ul>
<li> </li>
    <li> </li>
    <li> </li>
    <li> </li>
    <li> </li>
    <li> </li>
    <li> </li>
</ul>





<br />
<p><a href="#top" >Back To Top...</a></p>



<div id="footer">
<hr />
<p>
<a href="http://validator.w3.org/check?uri=referer">
<img class="logos" src="http://www.w3.org/Icons/valid-xhtml10" alt="Valid XHTML 1.0 Transitional" height="31" width="88" /></a>
<a href="http://jigsaw.w3.org/css-validator/check/referer">
   <img style="border:0;width:88px;height:31px"
    class="logos" src="http://jigsaw.w3.org/css-validator/images/vcss"
    alt="Valid CSS!" />
</a>
</p>
<h5><strong><i>
   This website is for educational purposes only. Any resemblance to any person - living or dead - is purely coincidental
</i></strong></h5>
</div>
</div>
</body>
</html>

Additional Info:
No -I haven't been able to get the DW Template feature to work on other sites - this is my first application of it to a website (actually it's the whole reason for getting DreamWeaver... I know it works, I know that I'm doing something wrong.. I just don't know what it is...)
All the .HTML files (index.html, cad.html, cam.html, etc. etc.) are in the website's root directory.
The Template file is in its own sub-directory folder named "Templates".
Right now even the .css file is in the root directory....
Thank You for trying to help me - I greatly appreciate it.
Joe

Dreamweaver template attach error

Similar Messages

Maybe you are looking for