Dreamweaver template child's content not displaying in Safari

I just created a template from this site:
http://www.bonch.tv/new/jarrett/comm.html
and made a new page from it, but the new page only shows the background in Safari, no other content:
http://www.bonch.tv/new/jarrett/comm_cancerpsa.html
It works fine in Firefox, though. Any help on figuring out what is causing this would be greatly appreciated.

In your template file, change this -
</script>

to this -
-->
</script>

Then given that you have 45 absolutely positioned elements on the page, it's fair to say that you have committed one of the more grievous mistakes a new developer can make: using absolute positioning as a primary layout tool. Looking at your page in FF I do not see any reason at all to use a single absolutely positioned container there....

Similar Messages

Room Template's icons are not displaying

In Collaboration->collaboration content->Administration of Room part Templates,
The Room Template's icons are not displaying.
All icons are avilable in the folder
\usr\sap\J2E\SYS\global\config\cm\etc\public\mimes\images
i checked in both IE 6.0 and Netscape.
Please give some Hints about this.

i solved the problem.The root directory was changed.So i corrected.The path is as follows
systemAdministration<>SystemConfiguration<>KnowledgeManagement<>ContentManagement<>FileSystemRepository

TOC Topic content not displayed in WYSIWYG Editor

I use RoboHelp X5. When I click a topic in the TOC pane I
expect to see its contents displayed in the WYSIWYG Editor. Instead
the WYSIWYG pane is grey and the TrueCode pane is blank with a
cursor flashing on the upper left corner!
I searched for some similar issue on this forum and could not
find it. However, I did gather that I could use another editor by
right clicking a topic when in the Project tab and selecting one of
5-6 editors. I tried RoboHelp TrueCode and was amazed and relieved
to see the code and content for the topic displayed in the TrueCode
pane...so I went a step further and tried the WYSIWYG editor and
wonder of wonders, the topic content was displayed.
Can someone please tell me what is going on? Should I
reinstall RoboHelp X5? Why does the topic content not display when
I click the topic from the TOC tab?

Welcome to the forum.
There have been posts about this but maybe your forum search
history is not set to go back far enough.
Rather than right click and selecting RH True Code, at the
bottom of the editing pane there is a true code tab which will
quickly enable you to see your code is still safe. That said, if
you then click WYSIWYG, you don't get the view restored, usually.
Maybe your way has an advantage.
It's one of those things that happens now and again. I don't
think reinstalling will help. I have had it happen several times in
a day and then you go months with it working just fine.
I don't believe anyone has ever lost any data. At worst you
just have to close RH and reopen it.
For what it is worth, I haven't seen this happen in RH7.

Page not displaying in Safari and Internet explorer but showing up in Mozila

Hi,
I bought this pre-made template which I would like to use for my website. When I upload it to my website and try to open the pages like "Contact us", "News", "Team members" and so on, they are not displaying in Safari and Interner Explorer, but they DO show up in Mozilla. Also, the pages I created myself do show up in all browsers. I really need to fix this problem as I already put a lot of effort to create my web site and now it is not working online. I would really appreciate some help. Here is the link to the original template:
www.opremadoma.si
Thanks,
Anne

The tag should read "myself" (no quotes) not "_self".
http://www.apple.com/quicktime/tutorials/embed2.html
For cross OS browser compatibility (and no "embed" tag code) you should consider using javascript:
http://developer.apple.com/internet/ieembedprep.html
With all of my skills I could not get your "hotspot" to open a new html page:
http://www.30fps.com/mov/aboveCristallina02VREn.mov

Site does not display in Safari

Trying to view a website that displays fine in FireFox and IE, but appears blank when viewed in Safari. Any suggestions, ideas?
http://www.casasmith.com/Web/Form/Vikings/Default.aspx

I would say that it does not display in Safari because it is not standard html document. The errors shown in the W3C Validator, especially the first one, indicate they are using proprietary Microsoft extensions. The fact that the page was created using "Microsoft Visual Studio .NET 7.1" bolsters this view. Safari is the least forgiving of browsers that are not written to the HTML/XHTML standards.

Social media buttons not displaying in safari

Hi
the social media buttons on my html site not displaying in safari browser, though fine in every other browser
see site below
http://digitalcinemafilms.co.uk/
Can anyone help?
thanks in advance
Melanie

Sorry forgot to say the java buttons dont work - facebook and twitter - the manually placed ones - vimeo and youtube work - so safari doest like java?

Content not displaying.

I built a login form and put an Application.cfc file in the folder i want to restrict and it's not displaying the simple text i put in the index.cfm for testing purposes.
======= Application.cfc code (in folder name "admin_section")==========
<cfcomponent>
<cffunction name="onRequest">
    <cflogin>
      <cfif IsDefined("FORM.Login_btn")>
        <cfquery name="qLogin" datasource="poll">
        SELECT UserLogin, UserPassword, UserRoleID
        FROM Users
        WHERE UserLogin = <cfqueryparam value="#FORM.UserName#" cfsqltype="cf_sql_varchar">
        AND UserPassword = <cfqueryparam value="#FORM.Password#" cfsqltype="cf_sql_varchar">
        </cfquery>
        <cfif FORM.username IS "#qLogin.UserLogin#" AND FORM.password IS "#qLogin.UserPassword#">
          <cfloginuser name="#FORM.username#"
                       password="#FORM.password#"
                       roles="#qLogin.UserRoleID#">
        <cfelse>
        <cfset request.errorMsg = "Incorrect login; please try again">
          <cfinclude template="../login/login.cfm">
            <cfreturn>
        </cfif>
      <cfelse>
        <cfinclude template="../login/login.cfm">
          <cfreturn>
      </cfif>
        </cflogin>
</cffunction>
</cfcomponent>
======= Application.cfc End =======
====== Login Form (in folder name "Login" ====
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
</head>
<body>
<cfform action="../admin_section/" method="post">
<table width="250">
<tr align="center">
    <td colspan="2">
      <cfif IsDefined('Request.errorMsg')>
        <cfoutput>#Request.errorMsg#</cfoutput>
      <cfelse>
        Please Log in.
      </cfif>
    </td>
</tr>
    <tr>
      <td>
        <font size="-1">User Name:</font>
      </td>
      <td>
        <cfinput type="text"
                 name="UserName"
                 required="yes"
                 message="- You must enter a user name!">
      </td>
    </tr>
    <tr>
      <td>
        <font size="-1">Password:</font>
      </td>
      <td>
        <cfinput type="password"
                 name="Password"
                 required="yes"
                 message="- You must enter a password!">
      </td>
    </tr>
    <tr>
      <td> </td>
      <td>
        <cfinput type="submit" name="login_btn" value="Log me in!" >
      </td>
    </tr>
</table>
</cfform>
</body>
</html>
It takes me to the page, but nothing displays. Again i have simple text for testing purposes.
Any help would be great.

Your problem is that you're using onRequest, which replaces the default page rendering event. There are two ways you could fix this.
1. Use onRequestStart instead. This will happen before your page is processed, rather than instead of your page being processed. This is the approach I'd recommend.
2. Add code at the bottom of your onRequest to include the page to be processed. You'd identify this page by using the targetPage argument and including it:
<cffunction name="onRequest">
     <cfargument name="targetPage" required="true">
     <cfinclude template="#targetPage#">
</cffunction>
Dave Watts, CTO, Fig Leaf Software
http://www.figleaf.com/
http://training.figleaf.com/

Business Workplace Inbox : Mail Content Not Displayed

Friends,
We have a problem in displaying contents of the mail(SAP Inbox) in one of the PC's. When we reply w/refernce to that message the content is displayed properly. And also the same mail content is displayed properly in another PC's for the same user.
We thought this is a GUI problem and re-installed SAP GUI(all components) but still the issue exists.
Any other settings are required to be done to solve this problem? Can anyone please help us solving the issue?
Note: we are using SO_DOCUMENT_SEND_API1 for creating the mail notification and the content is passed as 'RAW'.
Thank you very much for your help and suggestions.
Cheers,
MS
Message was edited by: Srinivasa Maram

Srinivas,
1) Is the problem only with the message being sent through custom code using SO_DOCUMENT_SEND_API1? What happens if you send a message using SAPOffice?
2) Are the patch levels of the GUI same on both machines? Are you sure both PCs are configured exactly the same? Especially wrt to Windows & IE patches. I vaguely remember there were some issues a while ago with some IE patches. Normally in most client environments the desktops upgrades are controlled centrally and users do not have admin rights. Make sure the user has not done upgrades/installs on the PC in question. If that were the case the PC may needs to be reimaged.
BTW - What version are you on R/3 and SAPGUI?
Regards,
Ramki Maley

HTML Content not displayed correctly in UWL

Hi all,
I have setup UWL to connect to SRM 5.0 system. I have no problem retrieving alerts from the backend. However, alerts with HTML content are not displayed correctly in the UWL. Instead of parsing the HTML content, the html tags are displayed instead.
Am I missing some configurations here?
Thanks in advance.

Hi Benny;
Please see:
My Oracle Support FAQ [ID 747242.5] << What are the browser requirements for accessing My Oracle Support?
If you have still problem you can go wiht SR
Regard
Helios

"BI Content" not displayed in RSA1

Hello Folks,
i have a newly installed SAP BW 7.31 with BI_CONT 747 Patch 3. When opening RSA1 the branch "BI Content" is not displayed, therefore no BI Content can be installed.
Do i we have to activate anything? or are there any special options in SPRO to enable this area?
When we use Txn RSORBCT, the branch "BI Content" is displayed, but there is no tree below...
Thanks in advance
--MIKE

Hi Mike,
Uncheck tick mark using transaction RSOCONTENT @ System is a Content Dev sys
Better rise ticket to BASIS team, they help better.
- vijay

Parent child relationship is not displaying for IDOC_OUTPUT_ORDERS (PO)

Hi,
Can somebody help me the reason why parent child relationship not displaying properly for ORDER05 basic type?
If we go in details about the problem, a purchase order is creating in R/3 through EBP. To modify my requirement I am using userexit EXIT_SAPLEINM_002. Here I am appending the records in the segment for E1EDKT1 and E1EDKT2. IDOC is creating with an error of status record 26.
When I check in the transaction WE19 for the respective IDOC the data is showing correctly for all the segments including e1edkt1 and e1edkt2 segments and also I check in the table EDID4 segment number is showing correctly and the for the segment E1EDKT2 PGNUM also showing correctly, but when I see the IDOC in the transactions WE02 unable to see parent child relationship between E1EDKT1 and E1EDKT2 segment. Simply the data is displaying one below other like other segment.
I don't know the reason why it is displaying like that?
If anybody is having the solution is highly appreciable.
Regards,
Noorul

hi hassan,
When you are appendng the REcods which belong to the purticular segment..
all the segment needs to be appended in in the proper order as in the WE30..
I<b> think you are appending the segment E1EDKT2 at the end of the EDIDD.. or IDOC_DATA in the user exit..</b> .. eventho no eerror will be displayed but idoc will generted with sataus 26 .. if check the <b>STATUIs Recored u ewill find the SYNTaX ERROR.</b>
<b>Sollution for ur probelm is</b>... don append the E1EDKT2 at the lastr instead <b>you ahve to insert the segment E1EDKT2. only afer E1EDKT1..</b>..
Tehn you r problem will be solved.. I had faced the Same proble when i worked on material maser idoc..
<b>Close this thread if when u r problem ise solved</b>
Reward if helpful
Regards
Naresh Reddy K

Iframe contents not displaying in FF Windows 7 or Mac

I've read almost all posts about frames not displaying in FF, however, I have an odd issue. While I am able to get the iframe to display, NOT ALL of its contents is displaying. It's odd. A sample page is below, click on the virtual tour tab and you will see what I mean. All the code does show up. This also happens for another page with similar type of code. This works fine in Chrome/IE both PC and Mac. Any help would be appreciated.
Thanks
http://www.kdnovelties.com/educational/terrance-the-giraffe/personalized_293.html

The content is there, but is hidden with display:none style rule, so it looks that if there is script running to show this content then it doesn't finish properly.
<pre><nowiki><div id="virtualbook" class="kdnbook" style="height: 465px; width: 680px; display: none; margin: auto;"></div></nowiki></pre>
Removing the display:none makes the book appear for me.
The Web Console also shows an error with the MP3 file:
<pre><nowiki>HTTP "Content-Type" of "audio/mpeg" is not supported. Load of media resource http://26ebe445280acec2e3b0-023df79dc48add581f4e26895345aac6.r54.cf1.rackcdn.com/page-flip.mp3 failed.</nowiki></pre>

Webhelp TOC and Contents not displayed in Google Chrome

Hello All,
I recently tried to view webhelp (generated using Robohelp 7.0) in Google chrome. But chrome displays only the first topic of the web help and does not display the TOC of the help. Can any one please help me in why this is happening.
PS: I am viewing the online help from a server and not from local folder. When viewed from within local folder it doesn't display any info.
Rithesh

Hi,
See snippet 103 and snippet 130 on Peter's site: http://www.grainge.org/pages/snippets/snippets.htm
Greet,
Willam

Content not displayed on webcenter spaces page tiIl I login to UCM server.

Hi Yannick,
I have created an html file which loads the flash file and checked in to the UCM server. I have added a content presenter on the page runtime and selected the html file as the content.
Now when I load the page, I couldnot see the content. The content gets displayed on the page once I login to the UCM server and refresh the webcenter page.
Please suggest the solution. I am working with Avitek Demo VM. I have stored the file in the public_images folder.
Thanks,
SK

You need to assign application (spaces) role "Administrator" to your user for Admin link to see (by default weblogic user is assigned to this role)
To add it
Login to Fusion Middleware Control -> WebCenter -> WebCenter Spaces -> Right Click on WebCenter -> Security -> Application Role
Add your user to role “Administrator”
Atul Kumar
http://onlineAppsDBA.com

Subtitles & other text not displaying properly safari & firefox

Hello
some text in Safari and Firefox is seriously degraded. I changed to Firefox because Safari was displaying wrongly, but Firefox has the same problem. See image:
I cannot use subtitles on BBC streamed movies either, and the timing of the movies on the bottom ribbon do not display either
I am using Lion 10.7.5
Is there a solution for this problem?

The tags at the bottom of my original message are out of date:
Should be
Mac OS Lion 10.7.5
Safari 6.0 (7536.25)
Firefox 16.0.2

Dreamweaver template child's content not displaying in Safari

Similar Messages

Maybe you are looking for