Dreamweaver Template problem updating links since upgrading to cs 5

I've just installed DW CS5 onto my W7 system.
Can some one please explain why when I update the menu links on my template
now
All my links are displayed like this now when the template updates
<li><a href="membrane_keypad.htm">Membrane Keypads </a></li>
I wish them to be like how they were below
<li><a href="../membrane_keypad.htm">Membrane Keypads </a></li>
Even if I hard code like the above code ..//membrane_keypad.htm dreamweaver cs5 over writes
them when I update the template.
Is there a setting somewhere I have missed.
I never had this issue on CS4
Regards
Ian

The links in the page will depend on what the links look like in the Template file and where the child page is saved in the site.
So - what do those links look like in the Template file? Where is the child page saved in the site?
Dreamweaver manages links in Template files and in Library items so that they are adjusted to account for saving that child page at any folder location in the site. Are you saying you DON'T want DW to do that?
For what it's worth, there is no difference between CS5 and CS4 regarding management of these links.

Similar Messages

Problems using links since upgrade???

I have a porfolio page with 52 images which are 165px x 165px. They all link to different pages. Since the upgrade I decided to make some changes to the order. When I try to change the links using the hyperlink box at the top of the window it appears correct when I first change it but after a few more changes i go back and it has changed to a completely different link. Many of the images share the same link whereas they should all be independent? It seems like after I make about 5 changes they previous link changes get corrupted? please advise?

Please send your .muse file and a link to this forum topic to my attention to [email protected] If your .muse file is larger than 20MB use a filesharing service like SendThisFile or Adobe SendNow.
Also, please provide me with the replicating steps.
- Abhishek Maurya

Dreamweaver CS6 Templates not updating pages since i copied the website to a new computer

Dreamweaver CS6 Templates not updating pages since i copied the website to a new computer
First i install CS6 on the new computer
copy the projects
import the websites
Now, when i change any template the pages do not update any more. New pages working correct. Also manuell updating works.
Any Idea?
Where are the info about the join template and the pages. Seems on the old computer - but where?
Thx

hm?
now I made a new page from the template on the new machine - and find one difference:
New Page:
<!doctype html>
<html lang="de">
<head>....
Old Page:
<!doctype html>
<html lang="de">
<head>...
The slash / after template=" is not there on the new machine. If i remove the slash on the copied pages and restart dreamweaver then it works. A lot of work, but i can solve my problem this way.
Maybe there is some checkbox for path handling...?

Dreamweaver 8 - not updating links when moving files

I am still having problems getting Dreamweaver 8 to work the
same way as my Dreamweaver MX2004. When I use the file panel in
Dreamweaver 8 to change the name of a file it does not update my
links throughout out site. I have gone to EDIT > PREFERENCE and
made sure that update links when moving files and the Prompt box is
checked.
I have also tried Site > Advanced > Recreate Site Cache
but it's not working.
Can anyone please help. Thank you.

Give me the code from a link that is not managed by DW,
please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Rockysowner" <[email protected]> wrote in
message
news:e2eoj3$idn$[email protected]..
>I am still having problems getting Dreamweaver 8 to work
the same way as my
> Dreamweaver MX2004. When I use the file panel in
Dreamweaver 8 to change
> the
> name of a file it does not update my links throughout
out site. I have
> gone to
> EDIT > PREFERENCE and made sure that update links
when moving files and
> the
> Prompt box is checked.
> I have also tried Site > Advanced > Recreate Site
Cache but it's not
> working.
>
>
> Can anyone please help. Thank you.
>

Dreamweaver templates not updating *.php file

Hello everyone,
I have been given an exisiting website to update that uses
Dreamweaver templates.
I have made the changes successfully within the content.dwt
file, saved it, and then uploaded both the new content.dwt file and
the related *.htm pages that were linked to it.
After going to the website to double check the new pages I
found a *.php file that uses the same template, content.dwt, but it
never asked to update that particular file.
So, I opened the *.php file in Dreamweaver and tried to apply
changes from the content.dwt file to it using: Templates - Update
current page, but no such luck. Since there is no code at the start
of this file like the other *.htm files how do I "connect" it with
the newly updated template. I tried making a small change on the
content.dwt file so see what files would come up in the "do you
wish to update..." list but for some reason the *.php file is not
there.
Perhaps the answer is fairly obvious to someone who has
worked with Templates a lot but since I have just started working
with templates I still have a large knowledge gap in this area.
Any help would be appreciated.
Many thanks
Mr Zedd

Can you post a link to the PHP page, please? This will allow
me to see the
HTML markup on it....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Mr Zedd" <[email protected]> wrote in
message
news:eviqn8$ntm$[email protected]..
> Hello everyone,
>
> I have been given an exisiting website to update that
uses Dreamweaver
> templates.
>
> I have made the changes successfully within the
content.dwt file, saved
> it,
> and then uploaded both the new content.dwt file and the
related *.htm
> pages
> that were linked to it.
>
> After going to the website to double check the new pages
I found a *.php
> file
> that uses the same template, content.dwt, but it never
asked to update
> that
> particular file.
>
> So, I opened the *.php file in Dreamweaver and tried to
apply changes from
> the
> content.dwt file to it using: Templates - Update current
page, but no such
> luck. Since there is no code at the start of this file
like the other
> *.htm
> files how do I "connect" it with the newly updated
template. I tried
> making a
> small change on the content.dwt file so see what files
would come up in
> the "do
> you wish to update..." list but for some reason the
*.php file is not
> there.
>
> Perhaps the answer is fairly obvious to someone who has
worked with
> Templates
> a lot but since I have just started working with
templates I still have a
> large
> knowledge gap in this area.
>
> Any help would be appreciated.
>
> Many thanks
>
> Mr Zedd
>

N97 RSS update issues since upgrading to v21

Hi Since upgrading to the V21 firmware on my N97, if the phone powers off for any reason, my RSS feeds default to not automatically updating. I have to go to each feed and reset the update schedule each time I run out of battery or change to my backup battery. Im using the built in RSS reader that you configure through the "Web" browser application. I am using this to display 3 feeds as widgets on the home screen. has anyone else experienced this or have any suggestions.

I have found a workaround:
The problem with RSS feeds disabling their auto-update setting only happens when you switch off the phone using the power button. If you power down by dropping out the battery the auto-update settings stay enabled.

Dreamweaver template to update file other than html?

Hi,
I am using Dreamweaver CS4 to manage my website.
The problem is i cannot get Dreamweaver to update my .tpl (php template)
Any idea?
Thanks

Thanks,
I finally figure it out how to get if fix.
May be i should say it clear, i use dreamweaver template which is a dwt file to update all html pages in my website.
But some of the file i use which is tpl extension (the same as html file but with template variables). The dreamweaver
did not recognize it. The page did not show up when i make changes in dwt file.
Then what i do is change the "configuration" > "DocumentTypes", so that dreamweaver recognize tpl as a type of html file.
After that i change extension.txt file also. Rebuild site cache. And now its done.

Dreamweaver Template not updating pages error code 2?

Hi All
I wonder if someone can help me - I have a site that i made with Dreamweaver. I then got a new computer (windows 7) and updated my dreamweaver from cs4 to cs5. I have just tried to update my pages and it doesnt seems to be working.
Not sure what information you need - but I have a root folder and within the root site there is a folder with Templates and the templates have the extension .dwt
I have read some posts that say recreate the cache which i have tried - this hasnt worked
I then read another post that says you can update the pages by Modify > templates > Update Pages..
When i tried this I get the update dialog box, but when i try to update the pages i get the following error message:
"error accessing file - (name of the dwt file), file not found, error code 2"
Can i ask the what is the error code 2 - i mean is there any information about the error code which will help me to resolve my templates not being found? as i am bit stuck...
Would appreciate any help on this and thank you in advance
Regards
Lorna

I would like further help with the issue Guy McMickle identified.
When I update links to my two template files I receive the above Error Code 2 message four times. There are 22 page files based on these templates.
The <!-- InstanceBegin template... code does not exist in either of the template files. I does, however, show up in every one of the 21 files that were created from one of the two templates. In these files it shows up in uneditable header code.
Why does the error code only show up four times? If the instanceBegin code is only generated when a file is created based on a template, how can it be avoided or corrected?

Problem Printing PDFs since upgrading to Lion

Since upgrading to Lion on two machines (macbook pro 2011 and imac 2010) I have had a HP CM2320 and a HP M2727 produce the following error whilst printing from Preview PDF documents:
/usr/libexec/cups/filter/cgpdftops failed
The PDF documents are many but here is an example,
http://dl.dropbox.com/u/26737363/Modified%20contract%20Causing%20error%20in%20pr int.pdf
The only way I can print is to print using Generic PCL printer driver. Gereic Postscript also causes the problem.
The problem doesn't occur when printing from Snow Leopard.

I went to the page of your link: Safari 5 without plugins displayed the pdf page perfectly.
Then I saved as.. to the desktop.
Then I opened it with preview, printed pefectly.
Closed Preview and opened it in Adobe Reader (I do not use Acrobat): printed perfectly.
I don not have a HP printer but I tried it on Canon Multifunctionals.
So I conclude: it is not Safari (or a plugin), it is not the document itself, it has to do with the HP driver(s) probably.

Problems with apps since upgrading to Mountain Lion

Since upgrading to Mountain Lion, I get the message "Application Not Responding" for several apps (Quark 9, CS5 apps, and Word for Mac) after they've been sitting open and not being used for a couple of hours. I have to "Force Quit", then restart the program. Not sure what's going on. Didn't have this problem with Lion. Any suggestions on what I can do to fix this?

OK, I updated Quark 9, CS5 apps & Word for Mac. Quark 9 and InDesign are still giving me "Application Not Responding" after being open and unused for a few hours. The other apps are now working fine...Photoshop, Illustrator, Adobe Bridge and Word for Mac. Any suggestions for what I should do about Quark and InDesign?

Problems downloading movies since upgrading to mavericks

Ever since upgrading to mavericks when it was first released, I have had nothing but problems downloading movies in iTunes. What normally would take no more than 30 minutes to download a movie and iTunes extras has now turned into waiting more than 3 hours with no less than 4 error messages saying iTunes cannot download the movie and I have to relaunch iTunes or reboot my entire system. It is getting quite annoying and I can't seem to find a solution.
Any help would be greatly appreciated.
Thank you in advance.

I upgraded to Mavericks on two computers and have display problems too! I have CC on one Macbook Pro (2011) and CS6 on another (2012) and I'm now almost positive my display problems are triggered by InDesign. I don't have to be doing anything special, and I don't have to be working in InDesign at the time, but InDesign has to be open and I get things like this:
Once it turns magenta or green, that's when I have to boot the system. I can still work with the glitchy display before it turns colors and if I'm still able to quit InDesign while it's glitching, the display goes back to normal. Same on both computers and the 2011 one has a new logic board in it.
At first I thought it had something to do with connecting my hard drive or my external display, but the display issues happened with both computers with nothing hooked up. Those are ruled out now. I took my 2012 computer to Apple and they told me it was a software issue and all my hardware is ok. Obviously they didn't fix the software issue because it's still happening.
This is not normal and needs to be fixed soon!

Dreamweaver template files updating, but javascript/jquery not being called on random pages.

Hello,
I have been tasked with updating the navigation on a site that is using a Dreamweaver template (DWT) as the base file. The navigation was originally built using jQuery navigation UI, however this did not address all of our needs and I have updated it with another version of an accordion.
The .dwt file only is only controlling the navigation and the head of the site.
I have integrated the new xhtml structure and added/removed javascript/jquery into the .dwt file. I saved the file, therefore updating all of the relevant .html files, and verified that the accordion works.
However - the accordion does not work for all of the xhtml files. Some files, seemingly at random, are not pulling in the javascript.
When opening the relevant .html files, I can verify that they have all been updated with the new xhtml and the correct javasctipt. However, when viewing the .html files that are not displaying correctly with FireBug, I can see that none of the jquery/javascript is being applied to the navigation (classes are missing that are injected into the xhtml, but the structure and css is correct).
I've done some research and the only issues I've been able to find are related to .xhtml files not being updated with the correct code, but in my case all of the affected files have the correct xhtml and scripts in the head.
Does anyone have any light to shed on this subject? I am quite puzzled.

While I understand that looking at code is the ultimate way to find a solution, the intent of my question was not "how do i fix this" or "what is wrong with my code" but rather "does anyone have any idea as to why this would be happening". Or even, "where would you start to troubleshoot this".
I made my question general as such because I intended on trying to troubleshoot on my own in order to better understand the issue.
Thank you for stating the obvious, not all first time forum posters are completely unaware of how to ask questions properly.

Question on templates and updating linked files

OK I have a master template file. Let's say it is named
a.dwt. I used a.dwt to create another template (b.dwt) that had
more content on it than a.dwt. I would use b.dwt to create a group
of similar looking pages which still had all the elements of a.dwt
but also the additional content of b.dwt.
Now if I make a change to the a.dwt template, all pages
created from a.dwt change except b.dwt. So either I forgot to
create the b.dwt by going to file->new->page from
template->and then save it as a .dwt OR maybe it's not possible
to have a secondary template that gets updated when the first
template gets updated thus causing all pages from the secondary
template to get updated?
Is there any way to go back and make b.dwt update
automatically whenever a.dwt gets updated? The scenario I have
right now is that I have to make certain site changes on both a.dwt
and b.dwt instead of just making the change on a.dwt and that
change flowing into b.dwt and its spawned pages.

>I think what possibly happened is that I opened a.dwt and
then made the
> addition of the form element to a.dwt but then simply
saved as b.dwt
> instead of
> FILE | New From Template
Yes, I think that's a possible scenario.
> There will be about 15 pages that will look the same
(have the
> same form) except that at the top it will say "Send mail
to Person X"
> where
> Person X will change.
I see. Are you using "mailto:" on each of those forms? This
method of
sending form data is notioriously unreliable, you know? It
depends on a)
your visitor's browser knowing what to do with such a link,
and b) your
visitor's email client knowing what to do with such a link,
and c) your
visitor not being put off by the security alert message that
may pop up when
they click. Nevermind the fact that it fails completely in
public locations
that do not have an email client installed.
Why not do this the right way with server scripting? In that
case you could
have a single page with a single form, and let the visitor
select a name as
the recipient from a list/menu field.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Johnny the boy" <[email protected]> wrote
in message
news:[email protected]...
>I think what possibly happened is that I opened a.dwt and
then made the
> addition of the form element to a.dwt but then simply
saved as b.dwt
> instead of
> FILE | New From Template
>
> Thus when I made changes to a.dwt, they did not
propagate to pages created
> from b.dwt
>
> I am asking you what I should do. Should I create a new
page from a.dwt
> and
> then paste in the form code (which is the additional
code that
> differentiates
> it from a.dwt)? There will be about 15 pages that will
look the same
> (have the
> same form) except that at the top it will say "Send mail
to Person X"
> where
> Person X will change.
>
> Or should I nest the templates by doing your steps:
> 1. Create a.dwt.
> 2. Spawn a child from a.dwt with FILE | New From
Template..., and select
> a.dwt
> 3. Edit this child, as needed, and then SAVE IT AS A
TEMPLATE, e.g., FILE
> |
> Save as Template....
>
> I do not understand how there will be a complex
maintenance price. The
> behavior that I would be looking for is that if I had to
make an addition
> or
> edit of the navigation using a.dwt, the change would
carry over to the
> b.dwt
> template and it's pages.
>
> I am kind of leaning towards copying the code that is
already present for
> the
> forms spawned from b.dwt and then pasting it into a
brand new page that is
> spawned from a.dwt but I don't know if that's the best
way to do it or if
> there
> would be consequences.
>

Problems with cfscheduler since upgrading to CF10

We are having major issues with the scheduler since upgrading to CF 10 (All the job are from CF 9 and had not issues)
1. When I try to update a schedule task I get
Unable to store Job : 'SERVERSCHEDULETASK#$%^DEFAULT.job_BASICDATA1_LOADER &#X28;PRPMS&#X29;', because one already exists with this identification.
and the JOB disappears
2. I have several jobs that create text files and when run from the scheduler the file is not creates BUT when run from the URL work fine. No errors from the scheduler or the job.
Any help would be appreicated.
Server Product
ColdFusion
Version
10,0,11,285437
Tomcat Version
7.0.23.0
Edition
Standard
Serial Number
1187-5009-9935-7814-8611-5578
Operating System
Windows Server 2008 R2

I also have a sound issue with fast track pro and posted this on m-audio forum today to see what turns up...
Periodically the sound through my FastTrack Pro crackles then dies.
I think this is more prevalent, albeit I don't understand why, when changing sound 'sources' e.g. if last use was via Ableton and next was from youtube, or visa versa - I can't replicate this at will, it seems to be random.
I can resuscitate things things by going in to the driver settings and changing a setting e.g. the output channel, saving (Applying), then changing back and saving again.
Model: iMac 27" (Mid 2011)
OS: Mountain Lion 10.8 (12A269)
CPU: 3.1 GHz Intel Core i5
Memory: 8Gb 1333 MHz DDR3
M-Audio Products: Fast Track Pro (software 1.8.1, firmware 1.00)
Ableton Live 8.3.3 - 32bit

Since upgrading to ios7 I cannot read pdf links, Since upgrading to ios7 I cannot read pdf links

Since upgrading to ios7 I cannot read pdf file links

Hi bcac,
If you are currently unable to access your iPad because it is disabled, you may find the following article helpful:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Regards,
- Brenden

Dreamweaver Template problem updating links since upgrading to cs 5

Similar Messages

Maybe you are looking for