Dreamweaver thinks my images are in a folder

I've set up a site with many images in the root folder. When
I drag an image to the page (also in the root folder, not a
sub-folder) the src box in the properties inspector has a slash in
front of the filename as though the image is in a sub-folder. For
example, if the image is named picture.jpg the src box in the
properties inspector reads /picture.jpg.
Does anybody know why this is happening? It's really annoying
because I have to erase the slash for every image in order for the
image to display in the browser.

Your site definition is set to use root relative links. Don't
panic. They
work. But they will not work in local preview UNLESS you have
enabled
PREFERENCES | Preview in Browser > Use temp files for
preview.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"ss2104" <[email protected]> wrote in
message
news:gnmqqc$pjp$[email protected]..
> I've set up a site with many images in the root folder.
When I drag an
> image to
> the page (also in the root folder, not a sub-folder) the
src box in the
> properties inspector has a slash in front of the
filename as though the
> image
> is in a sub-folder. For example, if the image is named
picture.jpg the src
> box
> in the properties inspector reads /picture.jpg.
>
> Does anybody know why this is happening? It's really
annoying because I
> have
> to erase the slash for every image in order for the
image to display in
> the
> browser.
>

Similar Messages

Aperture 2 Thinks Referenced Images are Offline with Network Home Directory

Aperture thinks my Home directory is offline, but it's not. My Home directory is on a Mac OS X Server on the LAN (i.e., not on the machine in front of me that I run Aperture 2 on). I'm able to import images from my Nikon D200 in RAW/NEF format using Aperture 2, and write them to my Network Home directory (again, on the Mac OS X Server across the LAN) with no problem. Images are added to Aperture Library as REFERENCED images. Actual image files and Aperture Library are within the Pictures folder in my Network Home directory (on the OS X Server across the LAN). Previews and images show up fine initially. However, after importing and quitting, the next launch of Aperture 2 shows those same imported/referenced images as being offline (i.e., alias badge with red strike-thru). No way to get Aperture 2 to recognize that these image files are really ONLINE, not off.
Tried to re-establish the link from Aperture to each image file using File->Manage Referenced Images..., but that corrupted something. Image becomes red slate with "Unsupported Image Format" message, and image preview goes blank/gray on next Aperture 2 launch.
Previous version of Aperture (v1.5.?) did not have this problem.

Thanks for the replies (in triplicate! from grommet). More information:
REFERENCED images that were imported earlier (using Aperture v1.5.x) show up ON-LINE in Aperture 2 (i.e., all is OK with the earlier images; referenced image badge has no red strike-thru).
The images that were imported more recently--all with Aperture 2--continue to show the referenced image badge with the red strike-thru, indicating Aperture thinks they're OFF-LINE (even though they're not). This makes it impossible to edit or use any of the more recent images that were imported with Aperture 2.
Here's the kicker: the more recent images imported with Aperture 2 and indicated as being OFF-LINE are stored in the SAME general file location as the earlier images that were imported with Aperture v1.5.x and are indicated as being ON-LINE!
My Home Directory is on a Mac OS X Server across the LAN.
Aperture Library is at: ~/Pictures/
Earlier images are at: ~/Pictures/Digital Photos/Roll-000001/1999-05-26-0001.NEF
Recent images are at: ~/Pictures/Digital Photos/Roll-000107/2008-04-17-0001.NEF
Clearly a bug with Aperture 2. I've filed feedback with Apple. Hope to heck this bug is not overlooked in next incremental release. I'm stuck/dead in the water without a fix.

Aperture thinks missing images are duplicates

I am running Aperture 3.4.3 on Mountain Lion on a 17" Macbook Pro.
Aperture crashed while importing pictures from an SD card. When I try to start the import again I have the following problems:
    When 'Do not import duplicates' is checked. It will not list the pictures that previously attempted an import but are not in the library.
    When 'Do not import duplicates' is unchecked, I see all the pictures on the card (including those that are missing).
    I do not want to import all pictures and then go through the library to figure out which ones are copies and manually remove them. There are hundreds of pictures on the card.
    I have tried holding command-option and have rebuilt both the database and the library. This does not change anything.
    Any advise would be greatly appreciated.

    I have tried holding command-option and have rebuilt both the database and the library. This does not change anything.
The partially imported images must be somewhere in the Aperture library. Have you looked into the Aperture Trash or checked if they are somewhere in a "Recovered Project"?

I have about 5,000 images in a Folder. How can I determine which images are NOT in a Collection?

I have about 5,000 images in a Folder. How can I determine which images are NOT in a Collection?

Create a smart collection with criteria "collection" and "does not contain"; and also with criterion Folder contains (or folder contains all)
That works if you are thinking about a specific named collection.
If you are interested in finding photos that are not in ANY collection, the usual trick is "collection" "does not contain" "a e i o u y"

I am new to Mac and am having trouble with uploading images from my pictures folder to Facebook and other share sites- some of my images are accessible while others are seemingly locked....

I am new to Mac and am having trouble up loafing images from my pictures folder to photography sites and Facebook. Some of the saved images are accessible, while others are not, ( they are light colored and cannot be uploaded) I am not saving them any differently.

Hi Robodisko,
Thanks for your prompt reply......
I often proof my work in preview then edit images in photoshop and rename from there. The dsc images are renamed to correlate the name of the class etc. i.e. dcs_001 is saved as the file name required 7A.jpeg etc.
The file names are required to correlate what is what and so on..........

Edge animation-images are not displayed on my dreamweaver-site

Hello, could someone please help me?
My animation, which is inserted into a Dreamweaver-website, shows no pictures - only text elements when you open the page in the browser. In the live view and preview in the browser the images are displayed but on the Website they are not display. I have already set the file permissions to 777 - but it did not help.
When i open the Animation without my Dreamweaver-site - only the Animation in the browser the Images are displayed correctly.

I've just found the error! One file was not uploaded... sorry ! Anyway thanks for the quick reply!!!

Images are missing in Aperture v2.1.4 after Project folder is renamed.

I was working with a batch of pictures (images) in Aperture the other day. Opening new projects and renaming some old projects. All to add some meaning to the content of the Projects. I had 150 pictures (images) in a "Colorado" project folder and decided to rename the project to "Colorado 2011". Looked for the images in "Colorado 2011" to make an album and there are no more pictures. All have disappeared.
Can everyone tell me how to recover the pictures (images)??

I would have said "Try renaming the folder containing the images in Rh's Project Manager. That sometimes fixes the problem. You can revert to the old name afterwards."
Keeping all the images, and / or topics, in the root is never a good idea. It can slow things down and it's messy.
You can move the images you can see but obviously you cannot move the others. Try moving a topic that has one of the images to a different folder and see if that refreshes. Also try deleting the CPD file and reopening Rh.
Backup first.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

JPanel Multipe Images are cutoff (layout problem I think)

I am adding images (custom JPanel: Entity class) to a JPanel but the images are getting cut off. I was originally trying BorderLayout but that only worked for one image and adding others added image cut-off the first or completely removed the original image all together. So I switched to other layouts and the closest I could get was BoxLayout however that adds a very large cut-off which is not acceptable either.
So basically; How can I add images (from a custom JComponent) to a custom JPanel without bad effects such as the one present in the code.
How do I go about adding images from Entity class to a JPanel without them getting cutoff or not showing at all?
Note: the images need to animate.
Entity Class:
import java.awt.Dimension;
import java.awt.Graphics;
import java.awt.Graphics2D;
import java.awt.image.BufferedImage;
import javax.imageio.ImageIO;
import javax.swing.JComponent;
public class Entity extends JComponent implements Runnable {
private BufferedImage bImg;
private int x = 20;
private int y = 20;
private int entityWidth, entityHeight;
public void run() {
bImg = loadBImage("test.png", bImg);
entityWidth = bImg.getWidth();
entityHeight = bImg.getHeight();
setPreferredSize(new Dimension(entityWidth, entityHeight));
@Override
public void paintComponent(Graphics g) {
super.paintComponent(g);
Graphics2D g2d = (Graphics2D) g.create();
g2d.drawImage(bImg, x, y, null);
g2d.dispose();
public BufferedImage loadBImage(String filename, BufferedImage tmpBI) {
try {
tmpBI = ImageIO.read(getClass().getResource(filename));
} catch (Exception e) { }
return tmpBI;
public int getEntityWidth() { return entityWidth; }
public int getEntityHeight() { return entityHeight; }
public int getX() { return x; }
public int getY() { return y; }
public void setX(int x) { this.x = x; }
public void setY(int y) { this.y = y; }
}Main:
import java.awt.EventQueue;
import javax.swing.JFrame;
public class MainWindow
public static void main(String[] args) {
new MainWindow();
private JFrame frame;
private GraphicsPanel gp = new GraphicsPanel();
MainWindow() {
EventQueue.invokeLater(new Runnable() {
public void run() {
frame = new JFrame("Graphics Practice");
frame.setSize(680, 420);
frame.setVisible(true);
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.add(gp);
}Graphics Panel: This is where the problem arrises.
import java.awt.BorderLayout;
import java.awt.Color;
import java.awt.Graphics;
import java.awt.Graphics2D;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.awt.event.MouseEvent;
import java.awt.event.MouseListener;
import javax.swing.JPanel;
import javax.swing.Timer;
public class GraphicsPanel extends JPanel implements MouseListener {
private Entity entity;
private Entity ent2;
private Timer timer;
private long startTime = 0;
private int numFrames = 0;
private float fps = 0.0f;
GraphicsPanel() {
entity = new Entity();
entity.setOpaque(false);
Thread t1 = new Thread(entity);
t1.start();
ent2 = new Entity();
entity.setOpaque(false);
Thread t2 = new Thread(ent2);
ent2.setX(100);
ent2.setY(100);
t2.start();
//ESSENTIAL
setLayout(new BorderLayout());
//COMMENT OUT add(ent2) to see the problem. Any image will do.
add(entity);
add(ent2);
//GAMELOOP
timer = new Timer(30, new Gameloop(this));
timer.start();
addMouseListener(this);
@Override
public void paintComponent(Graphics g)
super.paintComponent(g);
Graphics2D g2 = (Graphics2D) g.create();
g2.setClip(0, 0, getWidth(), getHeight());
g2.setColor(Color.BLACK);
g2.drawString("FPS: " + fps, 1, 15);
public void getFPS()
++numFrames;
if (startTime == 0) {
startTime = System.currentTimeMillis();
} else {
long currentTime = System.currentTimeMillis();
long delta = (currentTime - startTime);
if (delta > 1000) {
fps = (numFrames * 1000) / delta;
numFrames = 0;
startTime = currentTime;
public void mouseClicked(MouseEvent e) {}
public void mousePressed(MouseEvent e) {}
public void mouseReleased(MouseEvent e) {}
public void mouseEntered(MouseEvent e) { }
public void mouseExited(MouseEvent e) { }
class Gameloop implements ActionListener
private GraphicsPanel gp;
Gameloop(GraphicsPanel gp) {
this.gp = gp;
public void actionPerformed(ActionEvent e) {
try {
gp.getFPS();
gp.repaint();
} catch (Exception ez) { }

You got a bit of a concurrency time bomb on your hands with those Entity threads of yours. Your Entity class also inadvertently overrides Component#getX() and Component#getY() to return where the image is painted within the component. That can't be good. I'm also not sure how your Entity class is functionally different from a simple JLabel with an ImageIcon and a (20,20,20,20) empty border.
But as for your immediate problem: 1) Use FlowLayout for your Graphics panel, 2) Include a revalidate() call after you set the preferred size in the run() method of your Entity class 3) Don't override Component#getX() and Component#getY() in your Entity class and 4) Add the GraphicsPanel to the frame before, not after, you make the frame visible.

Certain master images are gone: how do I use my backup vault to restore?

Images stored in a folder (the little blue book icon) named Dogs is suddenly empty. Apparently the Masters are gone too. I have searched through the Library, in the original project, by date. They are gone.
(I think I know how I lost them — by renaming other images accidently keyworded as Dogs.)
But the issue is: how do I get back these images?
I have the Library backed up to a Vault on a dedicated external FW hard drive. I have read the posts about restoring the library, but am terrified to make a misstep, with all my images at risk.
I would very deeply appreciate advice on how to proceed — that is, use the vault to restore the lost images.
Thank you very much.
17 " Powerbook G4 Mac OS X (10.4.9) 2GB 1.67MH
17 " Powerbook G4 Mac OS X (10.4.8) 2GB 1.67MH

Choose File>Vault>Restore Library. Aperture will show you an alert that your old library will be renamed. If this is OK click restore. After the restoration is complete Aperture will prompt you to relaunch Aperture. After relaunch you'll see another dialogue box. If everything is OK click Recover Now. The next feedback you'll get is Recovery Complete. Click OK and you're done.
Jeff

Can't upload "put" files to remote server unless they are in a folder. Please help.

I have done many searches on this and found no solutions. Here is the problem:
When I upload a file from my local site to the remote server it works fine as long as that file is contained in a folder.
Example:
I can upload an image from my images folder, or a template page from my template folder with no problem.
BUT, I can not upload any web/html pages, my CSS page, site map, or any file for that matter that is simply in the root directory but not in it's own folder.
When I try to do that I get this error:
index.html - error occurred - An FTP error occurred - cannot put index.html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured.
File activity incomplete. 1 file(s) or folder(s) were not completed.
Files with errors: 1
index.html
So every time I make a change to my index page I can't upload it to the server without getting that error unless I use a 2nd party program like Filezilla - which works fine. It is only Dreamweaver doing this.
I have been using dreamweaver for a long time and had no problems with this site. This all started happening out of no where. and it is happening on my work and home computer.
I made no changes to my server preferances or anythijng like that.
I was just doing my thing - being happy - and then BAM, not happy any more....

Hi there. First off thank you for your interest and your help.
I have done what you suggest probably 30 times as I have obsessed over this crazy problem for a couple straight weeks before I finaly gave up on CS5.5
I'm not sure what you mean by REMOTE server. The only server settings I am aware of are the ones in Dreamweaver. Here they are:
5.0 Settings:
Server Name = the same values on each
Connect Using = FTP
FTP Address = same numeric value on 5.0 & 5.5 port 21
User name = same on both
Password = same on both
Root directory = is blank (I have tried it using / with no luck as well)
web URL = http://ftp.westbrookadvertising.com/www/htdocs/
Passive FTP is checked & Use FTP Peformance optimization is checked.
5.5 Settings:
Server Name = the same values on each
Connect Using = FTP
FTP Address = same numeric value on 5.0 & 5.5 port 21
User name = same on both
Password = same on both
Root directory = is blank (I have tried it using / with no luck as well)
web URL = http://ftp.westbrookadvertising.com/www/htdocs/
Passive FTP is checked & Use FTP Peformance optimization is checked.

Images are not visible in the client

Hi All,
I have created a Web Dynpro application for laptops using SAP Netwever Composition Environment 7.1 .
I have put the images in src\mimes\Components\com.utility.comp.UtilityComp (utility is the name of the application) folder and have specified the name of the jpg file in the source property of the Image UI element.
I am able to see the image in NWDS but not in the SAP Netweaver client . There is an empty space instead of the image in the client .
I have even set the visible property as visible.
It would be nice if you get help me out in displaying the images.
Thanks ,
Madhu.

I using local deployment. I deploy my application directly from NWDS to a Mobile Client running also locally in my machine. Maybe I'm wrong, but I think that Mobile Client look for resources in NWDS workspace.
This is the dpi file located in the Mobile Client inbox folder when I perform the deployment.
<?xml version="1.0" encoding="UTF-8"?>
<deployment>
<device>
<repository>
<mcd name="IrviaDemoApp" namespace="" version="1">
<action type="install"/>
<location type="local">
<source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\MOBILE-INF\MCD.xml" property="mcd" type="file"/>
<component name="hpcds.es~irvia_demo_app">
<applications>
<application deploy="true" name="IrviaDemoApp"/>
</applications>
<source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\bin" property="bin" type="dir"/>
<source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\gen_wdp" property="gen_wdp" type="dir"/>
<source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\src\mimes" property="mimes" type="dir"/>
<source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\gen_wdp\application-j2ee-engine.xml" property="j2ee_xml" type="file"/>
</component>
</location>
</mcd>
</repository>
</device>
</deployment>
There is a <source> entry for the mimes directory, where "Component images" are located.
PD: Sorry about my poor english. I hope you to understand me.

Images are not visible in the iPhone.

When I open iTunes there are number of images found in the iPhone, but the images are not visible in the iPhone actually.

I using local deployment. I deploy my application directly from NWDS to a Mobile Client running also locally in my machine. Maybe I'm wrong, but I think that Mobile Client look for resources in NWDS workspace.
This is the dpi file located in the Mobile Client inbox folder when I perform the deployment.
<?xml version="1.0" encoding="UTF-8"?>
<deployment>
<device>
<repository>
<mcd name="IrviaDemoApp" namespace="" version="1">
<action type="install"/>
<location type="local">
<source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\MOBILE-INF\MCD.xml" property="mcd" type="file"/>
<component name="hpcds.es~irvia_demo_app">
<applications>
<application deploy="true" name="IrviaDemoApp"/>
</applications>
<source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\bin" property="bin" type="dir"/>
<source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\gen_wdp" property="gen_wdp" type="dir"/>
<source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\src\mimes" property="mimes" type="dir"/>
<source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\gen_wdp\application-j2ee-engine.xml" property="j2ee_xml" type="file"/>
</component>
</location>
</mcd>
</repository>
</device>
</deployment>
There is a <source> entry for the mimes directory, where "Component images" are located.
PD: Sorry about my poor english. I hope you to understand me.

Pictures and Scanned images are now gray boxes

I have Adobe Reader XI and it will no longer show images or allow me to scan from my printer. I have a mac, and have always been able to create pdfs and scan to them until the past few days. My version is up to date. Images in pdfs and the scanned documents now appear as gray boxes.

All your images are pointing to your Templates folder. I would guess that they are not uploaded to the server.
I don't think that is the ideal place to store your images. Normally, one would have an image folder and images would be there. Also your css is also in your Templates folder, not ideal again.
IE:
Your css: <link href="../Templates/style.css" rel="stylesheet" type="text/css" />
Your image(s): <a href="../Templates/still_life_1_css.html"><img src="../Templates/still_life_1_thumb.jpg" width="35" height="35" border="0" /></a> <a href="../Templates/still_life_2_css.html"><img src="../Templates/still_life_2_thumb.jpg" width="35" height="35" border="0" /></a>
Usually when they are greyed out, then could be a broken link.

Keynote: Some images are missing

Ever since I upgraded to Keynote 6.2 and Mac OS 10.9.3 my images are deleted somewhere between me saving the file, and retrieving the file again later.
Last night I was working on a brand new presenation I created (not upgraded or imported). Everything looked great. I saved the file on my computer. The next day I opened up the presentation to work on it, and I received that warning dialog and about half of my images were gone. I cannot tell if there is any common trait between the ones that were gone, or not.
This is causing me to lose hours and hours of work. I'm either going to switch to Powerpoint, or downgrade my Keynote. Not sure which.
I see lots of people with this same issue, but under different circumstances than mine.
Has anybody successfully resolved this issue?

Ah! That is perhaps the missing piece of the puzzle.
I use Google Drive to synchronize the folder on my computer with my Google Drive in the cloud. Thinking back on it, I probably created the presentation on my home computer, then tried to open the presentation on my work computer. Bam. Missing images.
I will have to run a test to confirm, but I feel very certain that this is most likely the culprit.
The new Keynote file format seems to contain multiple files, and that probably was the catalyst.
Unfortunately, that means that your zip file workaround will not work for me.

Images missing in project folder

Hi you all,
I have created a big project in RB5 with 166 images included
in the topics. Everything was fine.
When I just opened this particular project the images appear
to be ok (you see them in the topics). But when I look in the
'images' folder in the project, I am missing 80% of the used images
(I only see 17 images!). If I locate the 'images' folder on our
network server, they all are there.
- 'missing' images are .jpg .gif and .png (at random)
- restoring location doesn't help: go to 'missing' image in
topic > go to image properties (right click) > image name is
correct (../images/edit24.png), preview is ok (right), but image
not in the project folder (left). I click OK and save the project
> image is back in the 'images' folder in the project! BUT when
I re-open the project, it's gone again.
Help me! What should I do? And how is this possible??

When the project was originally created (back about RH v9) it
was decided not to keep all the images in the root directory. We
normally save our images to our Images folder, then Browse to that
directory to add it into the first topic. Once referenced in the
topic, it is listed in our Images folder, as you said with the two
Images hierarchy. This has worked fine up until this upgrade to
RH7.
I also thought naming confusion might have been the case,
which is why I tried renaming the Images folder to a variety of
different things. However the only one that seems to stick is Img2.
I've also belatedly remembered to check another images
directory, which is located a couple of folders down (this is for
admin specific images). This is also missing files. And again, the
only folder name that correctly displays all images after deleting
the cpd is Img2. (why do I always find the weird things??
The current project is probably too big to share easily. I'll
see if I can recreate in a new project, but I suspect I won't be
able to. I'll let you know how it goes.
Edit: Okay, with the admin images folder, if I rename it
Images, I get a few more images than when it is Admin_Images. Img3
also seems to give me the full list, while Img1 gives me the same
list as Admin_Images...I think I'm getting more confused.

Dreamweaver thinks my images are in a folder

Similar Messages

Maybe you are looking for