DreamWeaver update fails on my Mac

While trying to install an update to Dreamweaver CS6 on my MacBook Pro running OS X 10.10.2, the update fails during the installation process with error code DS016, exit code 7. Does anyone have any idea what the problem is?

Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5

Similar Messages

IPad originally synced with PC, updates fail when on Mac

I originally synced and stored my iPad info on a PC, then a few months later I got a MacBook Pro. I'm running OSX 10.6.8 on Mac, iTunes 10.4. The problem is that when I attempt to update the IOS on iPad (as I did today), the update fails, then I have to go back to the PC and do a full restore then update.
My question is, can I make the PC "forget," or unregister the iPad, then have sole updates/restore/sync associated to the MacBook? I rarely use the PC, and it's just a pain in the butt to have to keep restoring from a 6 month old back up.
Thanks for any help!!

The iPad is designed to only be used with one computer, and there is no 'forget' option - you can copy all your iTunes content from the PC over to the Mac and start syncing from it, but you may lose all your content when you first connect it and have to re-sync it all back onto the iPad

Latest Premiere Pro CC update 7.2.2 Update Failed on New Mac Pro.

I can't get the latest 7.2.2 Premiere Pro CC to update on the new Mac Pro computer. Is it not compatible?
"Update Failed. Update could not be applied."
CC Manager says I am currently updated to the latest version. When I check my Premiere CC Version I am only on 7.0. I tried manually downloading 7.2.2 .dmg file and it fails.

Same problem here on a previous-gen MacPro tower running 10.7.
PPro CC won't update
Have yet to find a useful suggestion.

Help Update Failed Xperia Z Mac

I tried updating firmware via sony bridge mac app. I got a meaasge on my phone saying update failed. Now it wont boot and my mac dosent recognise.

If you could borrow a PC you could use PCC or SUS
Update Service (SUS)
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Dreamweaver update failed

Updated failed. Updates could not be applied.
Mobile Application Development
Installation failed. Error Code: U44M1P7

Please download and install the updates manually.
Go to http://www.adobe.com/downloads/updates and download the update that you are trying to install.
Refer : http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-upda tes-ccm.html

Dreamweaver update failed with U41M1C212

After installing Dreamweaver CS5.5 in Windows 7, and then trying to update, received message from Adobe Application Manager error code U41M1C212.
( could not connect, and download updates). Found solution in Forums acrobat discussion ( Update server not responding" when trying to update Acrobat 9 Pro ) from Ken7795, his solution worked perfectly, 1. Open Network and Sharing Center 2. Click Change adapter settings
3. Right-click the Microsoft Virtual WiFi Miniport Adapter, and click Disable.
My question is, why this solution works ? Thank you for your help.

blulou wrote:
After installing Dreamweaver CS5.5 in Windows 7, and then trying to update, received message from Adobe Application Manager error code U41M1C212.
( could not connect, and download updates). Found solution in Forums acrobat discussion ( Update server not responding" when trying to update Acrobat 9 Pro ) from Ken7795, his solution worked perfectly, 1. Open Network and Sharing Center 2. Click Change adapter settings
3. Right-click the Microsoft Virtual WiFi Miniport Adapter, and click Disable.
My question is, why this solution works ? Thank you for your help.
Sounds like an Acrobat question since the error only occured when updating Acrobat, but regardless, what is the Microsoft Virtual WiFi adapter that you have and is it running? It could be a conflict with the adapter with another adapter (software related). Being that the package for the Virtual adpater is part of the MSDN Developer Platform, you might want to cross post this in the MSDN forum as developers on that level will have more of an understanding of why development software would conflict with production software.

Why does the Adobe Acrobat DC Update Fail on a Mac Running OS X Yosemite 10.10.2?

I don't have Adobe Acrobat installed anymore, yet CC is still telling me I need to update Adobe Acrobat DC. When I try to update it, it gets to 35% and fails, every time. I've tried quitting and reopening CC; quitting CC, deleting the OOBE folder in my profile, and reopening CC. Regardless, it fails. Here's the output:
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR: DW013 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 6 error(s)
ERROR: -------------------- BEGIN - Initialization Failures - BEGIN --------------------
ERROR: Fatal error initializing from proxy files.
ERROR: The following proxy files could not be loaded
ERROR: /tmp/58A66F1A-A7D8-4523-AC9C-AF23DB3337F3/proxy.xml
ERROR: -------------------- END - Initialization Failures - END --------------------
ERROR: DW013: Cannot initialize payload session

Hi,
Could you please retry after restarting the system. This should be fixed now.
If this issue does not get resolve even after restart then please share the following details :
1. Operating System information.
2. Do you have any previous version of Acrobat installed?
3. Share PDApp.log file from ~/Library/Logs, Acrobat Installer logs (Adobe Setup Error.log and Adobe Acrobat DC 15.007.20033 <Date>.log.gz) from /Library/Logs/Adobe/Installers and install.log from /var/log.
4. proxy.xml if present in /tmp/58A66F1A-A7D8-4523-AC9C-AF23DB3337F3/proxy.xml .
Thanks,
Tushark

13.2 update fails on a Mac

Any idea what's going on here? I clicked see more details, located the log.gz file, decompressed it and found a couple of log files. Both had this error:
ERROR: DF019: Unable to find the file to patch. Re-install the product & then apply the patch again. (Unable to locate file to patch at "/Library/Application Support/Adobe/CEPServiceManager4/CEPServiceManager.app/Contents/Frameworks/IMSLib.dylib") (Seq 3)
01/09/14 17:07:28:965 | [INFO] | | OOBE | DE | | | | 3168 |
01/09/14 17:07:28:965 | [INFO] | | OOBE | DE | | | | 3168 | Please search the above error string(s) to find when the error occurred.
01/09/14 17:07:28:965 | [INFO] | | OOBE | DE | | | | 3168 | These errors resulted in installer Exit Code mentioned below.
01/09/14 17:07:28:965 | [INFO] | | OOBE | DE | | | | 3168 | -------------------------------------------------------------------------------------
01/09/14 17:07:28:965 | [INFO] | | OOBE | DE | | | | 3168 |
01/09/14 17:07:28:965 | [INFO] | | OOBE | DE | | | | 3168 | Exit Code: 7 - Unable to complete Silent workflow.
01/09/14 17:07:28:965 | [INFO] | | OOBE | DE | | | | 3168 | Please see specific errors for troubleshooting. For example, ERROR: DF019 ...
01/09/14 17:07:28:965 | [INFO] | | OOBE | DE | | | | 3168 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
01/09/14 17:07:28:965 | [INFO] | | OOBE | DE | | | | 3168 | END - Installer Session
01/09/14 17:07:28:965 | [INFO] | | OOBE | DE | | | | 3168 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
I checked the Library folder and sure enough:
I'm about to do an uninstall. Please let me know if anybody else running OSX 10.9.1 is having this problem.
Edit (6:05 Pacific Time) On another forum I read a suggestion to re-install CCloud. Did that win no success. Now uninstalling some other apps. I'll let you know.

Finally figured a way around this. I uninstalled Premiere Pro from the CC suite, then re-installed. The missing file, CEPServiceManager.app, showed up in the library and Dreamweaver, and the other updates released today completed without problems.
Still would like to know why the file was not there when it should have been....

Installing dreamweaver on mac air osx. Message appears update failed the patch is not applicable to you

Can't install dreamweaver on new mac air osx Keep getting message Update failed This patch is not applicable to you.

Dreamweaver download prob which version of Dreamweaver are you trying to install? What version of Mac OS do you have installed on your new MacBook Air? Finally what specific update is failing?

10.4.8 update failed, I now have mac os with serial number, no version

Tried to update my iBook G3 700MHz to 10.4.8 but the update failed. Software update told me that I could try running the updater again from the Trash which did not work (even after moving the file from the Trash and running it from the desktop).
If I try running the updater (delta or combo, downloaded from apple.com) I only get a message telling me that there was some kind of JavaScript error and that the package cannot be installed.
According to apple > About this computer I don't have any version of Mac os, there is just a serial number there that I have never seen before. The serial number is where 10.4.8 would normally be.
At the bottom of the popup it only says "(c) & tm", I believe it should read "c & tm Apple Computer".
Disc Utility cannot repair permissions on my start-up drive because the button is greyed out. It seems as if Disc utility cannot find any version of Mac os on my single partition. I have no other harddrives or partitions attached to the ibook btw.
The iBook starts up just fine and Mac os works though. I'm using the iBook now. All programs that do not check the OS version work fine too, but BBEdit does not start since it "requires mac os 10.3.5 or later" and Disc utility does not want to repair permissions since it thinks I have no mac os installed.
Any idea how to reset or repair the version number except reinstalling mac os?
I did an update on my G5 powermac and that worked just fine so I can probably copy files from there if I only knew which ones to copy.
iBook G3 Mac OS X (10.4)

Hi-
Sorry you're having problems. Me too, but not quite as severe as yours. Was running 10.4.7 on a TiBook 800, 37 GB free space. Ran from the autoinstaller and it failed the same way yours did and suggested I run the package that was in the trash. I pulled that out and first ran disk utility. It fixed some permissions but I was unable to run the 'repair' as it was greyed out (the 'verify' came up w/ errors and said the disk needed repaired). I started up in single user mode and ran fsck -fy. This was able to fix the disk and resolve all (disk) errors.
Reran the updater by double-clicking on the package but it fails the same way. My info under the blue apple icon is unchanged from before I ran the updater (not as severe as your problem). But I'm just waiting for more info or a new release from Apple. I don't want to find a way to force this update and end up in worse trouble.
This is not the stock disk that came from Apple, I've upgraded it. I haven't noticed any other problems w/ the computer's behavior.
Good luck and let me know if you find a fix.
PB Ti G4 / 800 Mac OS X (10.4.2)

Photoshop CS6 mac OS X 10.9.5 - cannot update 13.0.6 - error "Update failed - unable to write at location." Tried manual update also failed. Tried to change permissions also failed.

Photoshop CS6 mac OS X 10.9.5 - cannot update 13.0.6 - error "Update failed - unable to write at location." Tried manual update also failed. Tried to change permissions also failed.
Follow write permission on thread below - same error message
Re: CS6 updates and Mac write permissions
Need Adobe help to solve this. My own searches in Forums and Google all have failed.

It is not an Adobe problem. You have a OS permissions problem. You can try to correct this by using Disk Utility to Repair Permissions. It is in the First Aid area of Disk Utility.

All Appstore and Mac updates Fail saying "...could not be verified or may have become corrupt"

Recently my Mac started to become glitchy so I decided to wipe the hard drive and reinstall my OSX Mountain Lion. After doing so almost all of my updates fail showing this msg "...could not be verified or may have become corrupt". Not to mention downloading updates take ridiculously long. I have 80mbps down and small updates say they could take up to 2 days. I wanted to try upgrading to the the newest OS however that also has the error msg…not to mention a 4 days estimated download!
any help with this would be greatly appreciated!
and yes I did set my date and time to automatic.

Mavericks Download can’t be verified

Enter Machine Password DNS Update Failed on Mac Pro 10.6.6

Windows 2008 R2 Active Directory with several PCs and 3 MACs, all three at 10.6.6.
Only one, the Mac Pro, is slow to access network resources, gets Enter Machine Password: DNS Update Failed on Console, and is much slower to open webpages than the other 2 MACs; they work fine. I know that AD is configured right since I have no network errors on them.
Can bind and unbind as expected, can access Mac from AD Server as well as other PC/Macs, so this issue is not like most all other posts in that everything works except slow network (opening a network share gets the spinning wait cursor).
Any Ideas?
TIA

On the offending Mac open System Preferences->Network pane and highlight the port that you are connecting to the domain. Then in the right side of the pane click on the word "Advanced". In that drop-down select the DNS tab and make sure it has the same DNS that the domain uses. You can use thew + button to add the correct DNS servers. Also while in the Network pane, Advanced, select the WINS tab and fill it the appropriate settings for the Windows Domain.
Also on the offending Mac open System Preferences->Date & Time and make sure the Map Location is correct and also you are using the same Time server that the Domain uses (you can type in the Time Server address in the Time Server field.
Lastly are you using DHCP or Static in your Domain?

Dreamweaver CS6 update fails U44M1P7

Dreamweaver CS6 update fails U44M1P7

Hi Mary,
See the solutions in Installation failed. Error U44M1P7 | Updates and let us know if you need more help.
Thanks,
Preran

ACR 6.1 (Mac) Update fails

When I try to install the ACR 6.1 using the Adobe Patch tool supplied in the disk image, the install fails with this message:
Adobe Application Manager
Some updates failed to install.
The following updates were unable to install. If you wish to install these updates, please fix the problems below and retry:
Photoshop Camera Raw 6.1 Update
Installation failed
Contact Customer Support for further assistance.
There appears to be no way to determine why the install failed unless there are log files somewhere. Contacting Customer Support results in another download of Adobe Support Advisor. Running it produces this somewhat confusing message:
Found issues generated after 05/11/2010 00:00:00:
The module found no issues to report for the selected log file. If you continue to have difficulties with the application, please contact Adobe Support.
After reading other install issues, I have tried the install after a reboot with same results.
iMac 9,1
8Gb ram
OSX 10.6.3
Jim Kirkpatrick

I have exactly the same problem with trying to install ACR 6.1 on an iMac under OSX 10.6.3.
So I rebooted and tried again - no go.
Uninstalled CS5 and also used the Adobe clean script at http://www.adobe.com/support/contact/cs5clean.html .
Reinstalled CS5.
Tried again - get the same error:
Photoshop Camera Raw 6.1 Update
Installation failed
Any advice appreciated. Or maybe I just wait for the final release.

DreamWeaver update fails on my Mac

Similar Messages

Maybe you are looking for