Dreamweaver/Vista Conflicts??

I am considering buying a new laptop that has Windows Vista
Ultimate on it. I presently have XP and Dreamweaver CS3...has
anybody been running into any significant conflicts between Vista
and Dreamweaver CS3 that I should be aware of?

It is an understatement to say this is the first thing I
checked. but you see Vista Home Premium has a severe multiple
personality disorder. It does not recognize admins logon half the
time. there are several treatments but it will not take the cure in
the form of Vista updates that it refuses also to install. Every
time it's sickness gets threatened it refuses to take the admin
actions. Even though I have successfully installed other Adobe
programs.
The .NET Frameswork is broken and CMD efforts to fix it are
refused. PROMPT sfc/scannow error refused repair after multiple
tries Also acroIEhelper.dll refuses to delete to makeway for new
Adobe Reader. Efforts to find were it is used meet a blank wall.
Here is the rest of it so far;
I have now tried to install DW CS3 8 more times. 13 in all
I have tried the following suggestions from listers and the
university help desk;
1. running cmd and typing regsvr32 jscript.dll to fully
establish admin privledge.
2. Using AdobeCS3Cleaner in both methos 1 and then 2 to clean
out old files that might interfere. MS cleaner was installed also
as per Adobe instructions.
3. Running msconfig to do an alternate shutdown of all non MS
program, virus checkers, etc.
4. I have used these separatedly and in combination. The same
failure to install DW CS3 occurs. DW does not get installed and
shared components also fail.
Have run as per Adobe help desk intstructions
3 times tried 02-20-08
pulled cat 5 to protect from net
1) selective start settings all non MS off
2) restart
3 ) made sure acct control is off
4) made sure Norton si off
5) ran
adobeCS3clean script
6) ran DW CS3 installer from Desktop folder
Anomalies;
A) Acrobat 7 folder with file acroIEhelper.dll could not be
deleted
B) SFC error; Repair refused
Does that help the ? ;)
Adrian

Similar Messages

Wrt54g and vista CONFLICTS

Hello,
I bought two new Dell computers with Vista Home and Home Premium installed in February. I have had on going problems with communicating with the remote computer which has the printer wired to it. Using Wireless WRT54G router. Intermittantly loses connection to internet, just comes back by itself. Bigger problem is printing via the router is problematic. When using Word 2003, can't print. Printer set-up get's deleated. When I try to re-install the printer, the system hangs. At times, something happens and I can't access the remote computer at all--says I don't have permission or some such. In a few days it will magically start working again for not apparent reason. Another wierd problem....AFTER completing a print job, the print processes take on a life of their own and the CPU usage grows to 100% freezing the computer!
I have narrowed this down to Linksys, because the remote computer does not have these problems, which is connected via USB to the printer. Only the computer using the wireless router has these problems.
Eventhough Linksys says the router is compatible with VISTA, I think they've missed something, and there is still a conflict! HELP! LINKSYS, CAN YOU HEAR ME????

By default, Windows Vista uses NTVLM2 for authentication when attempting to map network drives to a Samba network share, such as your Home or Website share on Datastore01.
This problem can be resolved by making a change in the Windows Vista registry. The necessary change switches Windows Vista's authentication policy from "NTVLM2 responses only" to "LM and NTLM - use NTLMV2 session security if negotiated."
Try this and let me know if it works.

WRT54G Vista conflicts

Anyone have problems similar to mine?
Hello,
I bought two new Dell computers with Vista Home and Home Premium installed in February. I have had on going problems with communicating with the remote computer which has the printer wired to it. Using Wireless WRT54G router. Intermittantly loses connection to internet, just comes back by itself. Bigger problem is printing via the router is problematic. When using Word 2003, can't print. Printer set-up get's deleated. When I try to re-install the printer, the system hangs. At times, something happens and I can't access the remote computer at all--says I don't have permission or some such. In a few days it will magically start working again for not apparent reason. Another wierd problem....AFTER completing a print job, the print processes take on a life of their own and the CPU usage grows to 100% freezing the computer!
I have narrowed this down to Linksys, because the remote computer does not have these problems, which is connected via USB to the printer. Only the computer using the wireless router has these problems.
Eventhough Linksys says the router is compatible with VISTA, I think they've missed something, and there is still a conflict! HELP! LINKSYS, CAN YOU HEAR ME????
04-10-200708:49 AM

I am having a similar problem I have found the cd (setup wizard 6.0) that comes with the router not to work as it did on XP. I cannot get into safe surfing due to a conflict with symantec and Norton that I received pre loaded on my pc. I completly deleted all Norton and the update program to get the router working, still the conflict exists. I set up a wireless password on my network settings and now my internet works half the time. for now I have completly disconnected it and am using another router without wireless. Unsure of how to resolve this, it was a easy simple set up on XP.

Dreamweaver Installation Conflict

I bought dreamweaver cs3 a couple of months ago and installed
it on my computer. Since then my computer was wiped out and xp
re-formatted. Now when i insert the disk and go to the "setup" part
it says "conflicts with dreamweaver cs3" and so i figured that
parts of the old program files were still existent. However there
was no dreamweaver when i opened up "add/remove programs" and i
couldnt find any "uninstall" files. So i manually deleted all files
and foldes with "dreamweaver" in them... Tried to install it again
but still the same message. Can anybody PLEASE help? THANKS

Did you check your registry?
Odd thing is that if you reformatted your computer there
shouldn't be anything left from the old setup.

Can't install Adobe registry patch for DW/Vista conflict

Running Vista Business, Dreamweaver 8.02 installed. After
losing the use of Vista help function, I downloaded the registry
fix from Adobe's KB article (
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb400789&sliceId=1).
When I double click the file provided in the article
(DW8_Fix_Help_and Support.reg), I get the following error:
"Cannot import...Not all data was successfully written to the
registry. Some keys are open by the system or other processes."
No applications are running at the time. I have rebooted and
tried again with no success.
I am doing this while logged into a "standard user" account.
I noticed that I was able to make the registry fix when logged in
as an administrator, but when I log back in as a standard user the
Vista Help still won't function.
Just curious--anybody else have this problem? Should I be
performing my everyday tasks while logged into my administrative
account? I thought you weren't supposed to do this as a security
precaution.
Thanks for the help.

Hi there, I had this problem weeks ago - my Vista Ultimate
Help and Support can't open. As I realized later, this was due to
my DW 8 installed, and both had the XML crash. My system had that
fix installed successfully and I think there may be some
restrictions on your system.
1. Have you tried "Running as Administrator" on the fixes
(ie. Right-click on the application and choose 'Run as
Administrator'?
2. Maybe you had the wrong permissions set on your account -
that's why you could only have certain permission even when you are
on Administrator account.
If you still can't access it, you may want to try out
http://www.howtogeek.com/forum/
- these people are very helpful and most emails are replied
overnight.
Hope these help!
Ash

Dreamweaver & Vista

I am not sure why this is, but lately I've been having issues
with Dreamweaver...I open the program with no problem, however as
soon as I go to open a page within my website, Dreamweaver displays
"not responding" on the top title bar where it says Macromedia
Dreamweaver MX. Does anyone have any idea why? I wish I could go
back to my previous version of Windows...I am not liking Vista at
all!!!! Does anyone know if I can do that?

It is not a Vista problem per se. Dreamweaver MX predates
Vista by 5 years.
Dreamweaver MX is not compatible with Vista. Dreamweaver MX
was a version
you should run away from. Upgrade to Dreamweaver CS3 and it
will likely run
just fine in Vista. Given Adobe's current upgrade policy, if
you do not
upgrade now, you will lose the upgrade path to the next
version of
Dreamweaver, assuming they stay with the no more than 3
versions back
policy.
Michael
"salyc" <[email protected]> wrote in message
news:g2klfv$iug$[email protected]..
>I am not sure why this is, but lately I've been having
issues with
> Dreamweaver...I open the program with no problem,
however as soon as I go
> to
> open a page within my website, Dreamweaver displays "not
responding" on
> the top
> title bar where it says Macromedia Dreamweaver MX. Does
anyone have any
> idea
> why? I wish I could go back to my previous version of
Windows...I am not
> liking Vista at all!!!! Does anyone know if I can do
that?
>
>

Windows Vista conflicting with Clean Access?

When I try to log into Clean Access to use the internet, it gives me an error message saying that in order to fulfill all of my requirements and get into the system, I need to download windows defender. But Windows defender comes with Windows Vista, which is what I have...So when I try to download Windows Defender and install it, it gives me a popup saying that I already have it on my comnputer and that I don't need to download it. Any ideas? Anybody? Please? Am I even in the right place for this kind of question?

If you using Windows Vista,You already have windows defender. Ensure the version of the defender because if Windows Defender informed you that an update is available, you are running an older version.
Below are Windows Vista Supported Antispyware Product as of the latest release of the Cisco Clean Access software.
Product version - 1.x
AS Checks Supported
(Minimum Agent Version Needed) are:
Installation - (4.0.5.0)
Spyware Definition - (4.0.5.0)

Illustrator cs3 headache! Error loading plugins. ColorHarmony.aip DxfDwg.aip FHImprot.ap PNGFileFormat.aip TracingSuite.aip TrcingUI.aip

I have searched everywhere on both the net and the adobe website and there is no solution for this problem. I have tried all suggestions, aside from reformatting my hard drive and loading everything from scratch. I have Adobe CS3 Master Collection which we paid quite a bit for and I find these errors and mistakes outrageous. I have a Zune and I still hve to disable the launch using the Vista Task Manager in order to get PDF files to save using any progrm within the suite.
All of a sudden one day, I started getting the following error: Error loading plugins. ColorHarmony.aip DxfDwg.aip FHImprot.ap PNGFileFormat.aip TracingSuite.aip TrcingUI.aip
I have tried using the CS3 Script clean up tool, even at level 2. I have gone through and got rid of any vestiges of folders or files that have to do with Adobe CS3 Master Collection. Nothing works. The only thing that did work that I refuse to do is to make another User Account and use that account just for Illustrator so I have to switch users back and forth to send e-mails and such.
What is the fix for this? Is Adobe paying attention?
Any words of wisdom? I have read that even after paying the $39.95 for help from Adobe, they still dont have a solution. Is t his a ploy to make some money off of fees during this economy?

Okay all, here is what I have tried; re-installed printer drivers,nothing, then:
I went to C:\Users\[your name]\AppData\Roaming\Adobe\Illustrator CS3 Settings on Win Vista.
Found the following folders: Brushes, Composite Fonts, Graphics Styles, Kinsoku, MojiKumi, New Document Profiles, Plug-ins, Swatches, Symbols, Workspaces. All folders were empty except for the New Document Profiles which had the following: Basic CMYK, Basic RGB, Mobile and Devices,
Print, Video and Film and Web, as I said these are document files which I deleted before this re-installation and nothing. Same error as above.
The three files listed in the Illustrator CS3 Settings folders are: AI Color Settings, AIMenuFaceCache and IllustratorFnt.lst. I deleted all three, IllustratorFnt.lst rebuilds immediately when I Open Illustrator CS3, however, the other two dont seems to rebuild until I receive the Microsoft Windows alert: a problem caused the program to stop working correctly. Windows will close the rpgoram and notify you if a solution is available. You'd think with the many times that this program has shut down automatically, someone would have a solution by now!
There is no AdobeFnt.lst file as specified by Mylenium.
corrupt preference folder, the whole users preference folder: I do not see an AI.Preferences folder in this area neither, and when I reopen Illustrator there is still no Preferences folder. Dont know how to get to the whole users preferences folder. I have a done Search for Preferences*.* and I only get entries for ACT! 2008 CMR which we have installed here.
corrupt Illustrator Settings folder located somewhere in the Documents and Settings No, this does not seem to do anything, If I delete the entire contents under Illustrator CS3 Settings.
a corrupt or conflicting plug in from a thrid party which is what it sounds like. Nothing in the plug-ins (Illustrator CS3 folder) and I haven't downloaded a third party. I do see the plugins that this mentioned in this error: ColorHarmony.aip DxfDwg.aip FHImprot.ap PNGFileFormat.aip TracingSuite.aip TrcingUI.aip in the following C: Program Files\Adobe\Adobe Illustrator CS3\Plugsin\Extensions, but the system will NOT let me remove them.
a corrupt font(s) or font data base(s) or both. Removed all possible fonts that the system would let me, and still nothing.
a corrupt color or monitor profile (this once happened to me) Do not use Custom monitor nor color profies.
a conflicting haxie running a PC
an update to something on your user account Hmmm all I have done are the recommended updates to Vista
conflicting software on the mac it is usually entourage or Quicken but they usually interfere with the keyboard shortcuts. On a PC.
and on the pc world of course a virus that is affecting your user account because it has only found your password on that accounts and which you obtained via browser or e-mail. Ran a full system virus scan and nothing.
The last and very unpopular amongst the pc world is a permissions problem in the pc world they always find a work around thuis issue rather than face the fact and why Adobe may have given up at this point. Turned off the UAC account, but your right, when I tried to delete the mentioned plugins in the errror, it said i didnt have the permissions.
There can be other reasons. The reason Adobe could not find it is the problem on the pc is often denial that this is user induced it also a problem but to less a degree on the Mac.
Maintaining your system is important. I do regular scans and things.
For instance have you set your scratch to a hard drive hat has a lot of free space do you have scratch other than your start up disk? Have a huge hard disk and 4 gb of DDR3 ram.
How much RAM do you have these are less likely to be the problem since the new user account works.
If you want to get his running again try a few things and tell us what did not work and perhaps we can help with nrrowing it down.
PLEASE HELP YOU GUYS, THIS IS VERY BIZARRE, WHY WOULD ONE SEPARATE USER ACCOUNT WORK AND THE OTHER NOT. THEY BOTH PULL OFF OF THE SAME PROGRAM FILE FOLDER RIGHT?

Dreamweaver Flash Buttons / Frame Navigation in VISTA

Hey, I use some standard flash buttons from Dreamweaver to
navigate. I have two frames in this web. The buttons are in frame
"A" and refer to a target in frame "B". This worked perfectly fine,
even with IE 7 in Windows XP it still works. But in Windows VISTA
every button opens a new browser windows.
Windows VISTA, IE 7, Dreamweaver 8, running the web on my HD
Thanks in advance.
Sky

If you want to use Flash for navigation, consider this -
1. Some people don't have Flash installed - what do they do?
2. Search engines don't parse Flash links - your site will
not be spidered
3. Screen assistive devices don't parse Flash links - what
will those users
do?
4. DW cannot maintain links within a Flash movie, so if you
move or rename
a linked file, your navigation will break - what will you do?
It's usually a very bad idea for these reasons...
Adding in frames makes it even worse - you are in the deep
stuff here. Why
are you using frames?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"LeichterLernen" <[email protected]> wrote
in message
news:er5fua$3am$[email protected]..
> Hey, I use some standard flash buttons from Dreamweaver
to navigate. I
> have two
> frames in this web. The buttons are in frame "A" and
refer to a target in
> frame
> "B". This worked perfectly fine, even with IE 7 in
Windows XP it still
> works.
> But in Windows VISTA every button opens a new browser
windows.
>
> Windows VISTA, IE 7, Dreamweaver 8, running the web on
my HD
>
> Thanks in advance.
>
> Sky
>

Dreamweaver and Windows Vista Problem

Hello,
I ran into a problem with my Dreamweaver - 8 application and
cannot find a fix. I open up the Dreamweaver application, 2-3
seconds later, I get the following error message, “A problem
caused the program to stop working correctly, windows will close
the program and notify you if a solution is available.” I am
using Windows Vista and believe the problem is associated with the
Vista operating system. I am puzzled by the fact that I have been
using Dreamweaver with Vista and have had no problems up until now.
I uninstalled & reinstalled Dreamweaver to no avail. I
restored my computer to an earlier date, and updated Dreamweaver,
and still have the same problem.
Any help to resolve this problem would be greatly
appreciated.
Steve
Text
Text

Hello Again,
I finally fixed the problem. I went into my network settings
and reset my network address. This did the trick, I went back and
opened up Dreamweaver without any problem.
Steve

Is Dreamweaver compatible with Windows Vista?

No matter what I do I can't insert text into Dreamweaver. I'm
beginning to think Dreamweaver is not compatible with Windows
Vista. I can type text into it but I can't write a document in
another program then insert it into a DW page. It just won't do
anything at all. I've watched about 4 videos on this and read many
things on Dreamweaver help and can't find it. I think it might be
easier to learn html than Dreamweaver. I can't find any good
Dreamweaver tutorials, even in Lynda.com. They all teach as if you
already know most of the program.

Where are you copying the text FROM? Which app?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"bob e kimball" <[email protected]> wrote in
message
news:ginjdm$q8g$[email protected]..
> No matter what I do I can't insert text into
Dreamweaver. I'm beginning to
> think Dreamweaver is not compatible with Windows Vista.
I can type text
> into it
> but I can't write a document in another program then
insert it into a DW
> page.
> It just won't do anything at all. I've watched about 4
videos on this and
> read
> many things on Dreamweaver help and can't find it. I
think it might be
> easier
> to learn html than Dreamweaver. I can't find any good
Dreamweaver
> tutorials,
> even in Lynda.com. They all teach as if you already know
most of the
> program.
>

Dreamweaver CS3 hangs on "initializing files" in Windows Vista Home Premium

Hi,
Anybody else encountering this issue? I noticed this7 error
in Windows Vista Home Premium. When you launch Dreamweaver CS3, it
opens the splash screen, displays “initializing files”
and thats it.
Necessary Troubleshooting steps we’re already done to
attempt to launch/fix the program but to no avails.
seems the problem happens on acer computers with 4 gigs of
ram.
You can check it from this
Thread
Thanks! I hope someone from engineering can take a look at
this issue!

A little more on this topic with solution ...
http://sidapolinario.unicpinoy.com/2008/05/09/dreamweaver-cs3-some-emmerging-issues/
Regards.
Patrick.

ITunes 7.3.1 under VISTA causes DVD/CD driver conflicts or blockage !!!!!!!

After installing iTunes under VISTA I noticed that both of my DVD/CD drives were missing. Device manager shows a conflict or blockage causing the drivers not to start.
I tried iTunes 7.3.1 on another PC with VISTA and it did the same thing. I had to remove iTunes since it basically disables by DVD and CD drives. Any ideas?

Actually everything is working just fine after I had
uninstalled iTunes 7.3.1. Oh, I didn't have error
code 31 but just for your information it was 10.
Please don't give bad advice to people or perhaps to
some that don't even know what regedit is or will
even do for that matter. Apple should be able to
put together a script that will get the job done
correctly without having the enduser try a dangerous
tool.
I love how you're asking for help, and then refusing the help provided. Regedit is complex, but that article goes through it step by step, and even gets you to export the specific registry tree that you will be working on, so you can set the registry back to how it was before.
However, the regedit fix that was mentioned earlier would be the easiest thing to go through. If you go through the steps and it doesn't work, try going through the exact same steps again, except skip the step where is says to enter 'GEARAspiWDM' in the UpperFilters. If you just leave UpperFilters blank, and restart the computer, the CD drive should re-appear, and iTunes should work (but give you a message saying that you'll be unable to import or burn CD's... although most of the time you still can anyways). If it doesn't work, you can always import the registry tree back to how it was before, and close out of that scary regedit program.

Connection String Problem with Dreamweaver CS4 and Vista Compatability?

Hi,
I am receiving the below error when viewed in the browser.
I am running this under Vista Home Premium and IE7 with IIS
7.0
and I am using DreamweaverCS4. Please help me can we fix
this.
Thanks in Advance.
error '80004005'
/test/index.asp, line 8
Code looks like below in connTest.asp page:
<%
' FileName="Connection_odbc_conn_dsn.htm"
' Type="ADO"
' DesigntimeType="ADO"
' HTTP="false"
' Catalog=""
' Schema=""
Dim MM_connTest_STRING
MM_connTest_STRING = "dsn=dsntest;"
%>
Code looks like below in ASP page:
<%@LANGUAGE="VBSCRIPT" CODEPAGE="65001"%>

<%
Dim rsTest
Dim rsTest_cmd
Dim rsTest_numRows
Set rsTest_cmd = Server.CreateObject ("ADODB.Command")
rsTest_cmd.ActiveConnection = MM_connTest_STRING
rsTest_cmd.CommandText = "SELECT * FROM testtlb"
rsTest_cmd.Prepared = true
Set rsTest = rsTest_cmd.Execute
rsTest_numRows = 0
%>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml"
xmlns:spry="
http://ns.adobe.com/spry">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8" />
<title>Untitled Document</title>
<script src="SpryAssets/SpryData.js"
type="text/javascript"></script>
<script src="SpryAssets/SpryHTMLDataSet.js"
type="text/javascript"></script>
<script type="text/javascript">

</script>
</head>
<body>
<p><%=(rsTest.Fields.Item("Field1").Value)%>
</p>
<p><%=(rsTest.Fields.Item("Field2").Value)%></p>
<p><%=(rsTest.Fields.Item("Field3").Value)%></p>
<p> </p>
<p><%=(rsTest.Fields.Item("Field4").Value)%></p>
</body>
</html>
<%
rsTest.Close()
Set rsTest = Nothing
%>

"srikanth1058" <[email protected]> wrote in
message news:go0qd7$cg1$[email protected]..
> Hi,
>
> I am receiving the below error when viewed in the
browser.
> I am running this under Vista Home Premium and IE7 with
IIS 7.0
> and I am using DreamweaverCS4. Please help me can we fix
this.
>
> Thanks in Advance.
>
>
> error '80004005'
>
> /test/index.asp, line 8
>
>
Follow the instructions on the following page - and the
linked pages - and see if that helps:
http://blogs.iis.net/bills/archive/2009/02/20/more-tips-and-troubleshooting-help-for-class ic-asp-developers.aspx
Ken Ford
Adobe Community Expert - Dreamweaver/ColdFusion
Adobe Certified Expert - Dreamweaver CS3
Adobe Certified Expert - ColdFusion 8
Fordwebs, LLC
http://www.fordwebs.com
http://www.cfnoob.com

Is there a patch to help Dreamweaver work without problems in vista?

Please let me know if there is a patch I can download to make
Dreamweaver compatible with Vista. The problems are numerous and
are driving me nuts at the moment. Can you upgrade to DW CS3 from
the website?
Nick.

There are many of us who are running DW without problems in
Vista. What
problems are you having? Which versions of Vista and DW are
you running?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Megisti" <[email protected]> wrote in
message
news:evf3v1$1nj$[email protected]..
> Please let me know if there is a patch I can download to
make Dreamweaver
> compatible with Vista. The problems are numerous and are
driving me nuts
> at the
> moment. Can you upgrade to DW CS3 from the website?
>
> Nick.
>
>

Dreamweaver/Vista Conflicts??

Similar Messages

Maybe you are looking for