Dreamweaver will not install

I have tried installing from the AAM which stalls at 24% and from a direct download which stalls at 25% while installing adobe help. I have already installed photoshop and lightroom without problems. I have updated the AAM with still no improvement

Hi jsteinmann,
Thanks for getting back to me. I have tried this 5 times
now:(
I don't understand what the issue could be. I am going to try
one more time, and if it will not install, then I think that I will
just have to bring my mac laptop to school so I can use
dreamweaver. I think that adobe would want people to be able to
install there software, otherwise why could they sell it? The last
one even asked me to install the disk, but since I am downloading
off the Net there is no disk, yikes!
This is bizarre!
Thanks for your help,
John

Similar Messages

Dreamweaver cs6 will not install after i uninstalled it

having problems reinstalling dreamweaver cs6 it wasnt working right so I uninstalled it now it goes to 25% and will not install anymore it seems to be stuck at the help part of installment. bob b.

Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://www.adobe.com/support/contact/cscleanertool.html

Vista re-install, now Dreamweaver will not launch

I am a dummy so please do not give me solutions that are too complicated or at least use terminology that is for dummies.
Purchased CS3. Did not install it on any computer.
Bought new computer.
Installed CS3.
Think I registered, can't remember 'cause I am a dummy.
Two months later stupid Vista needed to be completely re-installed.
Installed CS3 (because my hard drive was wiped clean and Vista was re-installed).
Registered because it asks me to when I first opened it.
Dreamweaver will not open. (photoshop etc. does)
What do I need to do (besides getting a new brain)?

I have to say I am impressed.
A call this morning had me speaking to someone who was friendly without being condescending as some men (in my experience, I can't speak for anyone else) are when talking tech to women.
Unfortunately he could not solve the problem and asked if I could call back while he looked up the solution. I called back and again I was speaking with someone repsectful and friendly. Again the problem could not be solved, but he forwarded my call to a "Dreamweaver specialist."
This person, also friendly, helped me with an Acer patch and now the program opens. How thankful am I? Very. I was panicking inside at the thought of having to go back, even temporarily, to hand-coding html and css. Phew.
Patch is here: http://www.egistec.com/oem-acer001/program-update.html.
Thanks again Adobe.
PS I am not actually a dummy.

Acrobat 9 Pro will NOT install (CS4 Design Premium)

Acrobat 9 Pro will NOT install (CS4 Design Premium)
Acrobat Pro 9 will not install (FAILED), although every other program on the CS4 DVDs did install properly.
I have followed the instructions, and have tried with no programs running, not even virus protection (which is an insane thing for Adobe to demand of a product being installed where the installation routine is expecting an Internet connection): FAILED.
I uninstalled my Acrobat 6 Pro, (a standalone Pro version that I had to have a few years ago.) I uninstalled that working program knowing I had no idea where my original Adobe Acrobat CD is located, so I was essentially cutting myself off of Acrobat Pro if the Acrobat 9 Pro install continued to fail.
I reported this to Adobe support online.
I have followed the instructions to disable startup items and services, then tried the Acrobat 9 Pro install: FAILED.
At that point, I gave up installing Acrobat 9 Pro. I didn't have any more time to screw with it - I would re-visit the installation failure later.
Lo and behold, a client sent me a PDF file of a brochure, in an email, and I had to grab some text from it to put on his website (Done in Dreamweaver CS4.) Well, damn, now I'll have to go back and get that install to work...FAILED!
Suspecting a problem in the installation routine on the DVD, I decided to download the trial version of Acrobat 9 Pro. So, I did. It downloaded and installed without a hiccup, and I had Acrobat 9 Pro working for 30 days...
I did what I had to do, using the trial version, then figured I would re-visit the installation issue later, when I had a few hours to dedicate to all the hell of calling Adobe software support, handholding, maybe registry edits, multiple reboots, and multiple attempts at doing everything again, just so the support person would know that I did follow all the steps correctly to prove thw outcome is sill FAILED!
Oh crap, I got another PDF file. No problem, I thought, I don't need to edit the PDF, just read it. When I tried to open the file, Acrobat 9 Pro plastered a screen over the program - the screen saying my 30 day trial version has now run out, demanded a serial number, or quit. My CS4 serial number would not activate it, and so I had to quit, not even being able to read the PDF file.
So, I un-installed the trial version of Acrobat 9 Pro that had installed without a hitch and had worked flawlessly for 30 days.
Now I'm going to have to visit hell, and get the software that I paid hundreds of dollars for to work...
Please STOP and NOTE: Acrobat 9 Pro installed perfectly from the downloaded Internet version. What does that tell you? There are no operating system issues, no hardware compatibility issues (which I knew anyway, as the OS and hardware is up to date.) Even more significantly, there is no issue with the Windows registry, or other versions of Adobe Acrobat that had been installed before in the machine. My conclusion was that it has to be a problem with the installation routine on the CS4 disks.
So, I spent an hour on the phone with Adobe personnel: software support, to customer service, to sales, to customer service, and back to sales. After software support came to the conclusion that I needed to UNINSTALL ALL OF CS4, and run a clean-up utility, I knew I had to try getting a new set of DVDs and hope the installation routine problems/bugs had been worked out.
After being batted back and forth by Adobe Customer Service and Adobe Sales, I finally got someone to agree to send a set of DVDs to me.
I got the DVDs. I tried to install Adobe Acrobat 9 Pro: FAILED
As I told the software support person, I do not want to un-install the entire CS4 suite. I have all of those programs working fine, and have about a dozen web sites within Dreamweaver CS4 painstakingly set up and active, and some of them are current projects that I am working on daily. I also have multiple extensions installed, and spent quite a bit of time getting all of those programs set up for my preferences and my work flow. I DO NOT WANT to uninstall the entire suite of applications to get Acrobat 9 Pro to install.
And the conclusion of the "sophisticated" Adobe Support Advisor as to what specifically was the instalation issue?
Adobe Support Advisor
The module found no solutions to report for the selected log file.
If you continue to have difficulties with the application,
please contact Adobe Support: http://www.adobe.com/support
System Information :
Operating System = Windows XP
Locale = en
At this point, what I want is to know what registry keys to edit and which folder(s) to delete to eliminate previous traces of Acrobat. In other words, just exactly the tiny piece of the "clean-up utility" that I need to run in order to allow the *Y#^%@#&#(& installation routine to work for Acrobat 9 Pro. I have no intention of uninstalling Dreamweaver CS4, as that is my business livlihood, and I know that my Dreamweaver CS4 client files/sites could not be read by earlier Dreamweaver versions. Asking me to uninstall Dreamweaver, Photoshop, Illustrator, Flash, InDesign, and Fireworks is insane. Your bad installation routine is not my fault, and you cannot expect me spend countless hours getting all those programs set up the way I want and with all my client/work files working correctly and all the extensions set up properly. So, if Adobe software support refuses to tell me what registry keys need to be changed, then I want Adobe Sales to send me a new, standalone version of Acrobat 9 Pro on disk.
Dennis

I hit the same problem except I had a Reader X installed not a pro version. For me the solution was to really make sure that nothing else was running. I followed the steps from http://support.microsoft.com/kb/2438651#reso2 the link is goofy so here is the pertinent text:
Programs that are currently running on your computer may be interfering with the installation processDisable programs that might be interfering with the installation process. To do this, follow these steps:
Click Start
, type msconfig in the Search box, and then click msconfig.exe.
If you are prompted for an administrator password or confirmation, type the password, or provide confirmation.
On the General tab, click Selective startup, and then click to clear the Load startup items check box.
Click Services, click Hide all Microsoft services, and then click Disable all.
Click OK, and then click Restart.
Try running your software program installation.
When you are finished troubleshooting the problem, restart the computer in Normal Startup mode. To do this, follow these steps:
Click Start
, type msconfig in the Search box, and then clickmsconfig.exe.
If you are prompted for an administrator password or confirmation, type the password, or provide confirmation.
On the General tab, click Normal startup, click OK, and then click Restart.

My Elements 8 was not working OK so I reinstalled it off CD. Will not install

Elements 8 was not working OK so I reinstalled it off CD. Will not install and says installation interrupted. Try again - OK - no go. Also lost initial installation so I now have no Elements 8!!!

OK. Have you got any other Adobe products like Photoshop or Dreamweaver? IF the answer is NO then I suggest try to use this Adobe cleaner:
<http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html>
This utility works very well in PSE so it is a good idea to clear the registry entries using the official tool from Adobe.
If you have other products then PLEASE DON'T USE THIS TOOL BECAUSE THE TOOL CLEARS EVERYTHING FROM THE SYSTEM PERTAINING TO ADOBE. (sorry about capital letters but it is essential you read it carefully)
Good luck.

Downloaded calendar extension will not install

just downloaded Light Date Picker Calendar for Dreamweaver CS6 (not CC). Extension manager CS6 says invalid. Will not install. How do I get a refund if this is not valid?

It is not compatible with CS6, as per compatibility window on the add-on homepage.

I am trying to use an education program that needs Java applets to install and use and it will not use Safari. When I download IE from the web it will not install. How can I get a browser that will work on my MacAir for travel use of this program?

I am trying to use and education program that needs Java applets and it will not run on Safari. IE will not install from the web. How do I get a browser that will work to install so I can use this program when I travel.

Try using FireFox. IE will only run on a Mac if you run Windows on the Mac.
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows 7 or Windows 8. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusion and Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. A more recent comparison of Parallels, VM Fusion, and Virtual Box is found at Virtualization Benchmarks- Parallels 10 vs. Fusion 7 vs. VirtualBox. Boot Camp is only available with Leopard and later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.

I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.
I have tried to uninstall all Abode Acrobat installations but one file remains and refuses to be uninstalled. It gives me this error : Error applying Transforms . Verify that specified paths are valid. It was installed on Sept 18 2014. I have downloaded a Transform update but it tells I do not have a Adobe Acrobat product installed.

Hi all,
Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
Please help !
Regards,
Vipul

ITunes will not install, I get an error message: Could not open key:HKEY_LOCAL_MACHINE_software_classes_CLSID

I tried to reinstall iTunes 10.5 on an older PC using Windows XP. iTunes will not install. Tthis is the full error message. Could not open key: HKEY_LOCAL_MACHINE\software\classes\CLSID\{063D34A4-BF84-488D-B699-E8CA04DDE}
Please Help

I was able to solve this problem using the utility explained in this post:
http://blogs.msdn.com/astebner/archive/2006/09/04/739820.aspx
Thanks!
Dell Windows XP

ITunes 11.2.2 for Windows x64 will not successfully install. Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2. Any Thoughts?

iTunes 11.2.2 for Windows x64 will not successfully install. Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2. Any Thoughts?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component won't install normally.
If needs be, the Microsoft Program Install and Uninstall Utility (MS Installer "Fixit") may be able to help force through the installation.
tt2

Quicktime will not install on my PC - also stopping iTunes from working

Quicktime and iTunes will not install on my Vista SP 1 PC, Whenever I try to install either I get the following error message;
Quicktime - "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
iTunes - "The installation of Quicktime did not complete successfully. iTunes requires Quicktime."
From my iTunes error message I hope that by correcting the Quicktime error the iTunes should in turn be fixed.
I am using the latest installers for each and I can't understand why this is happening,
I have tried completely removing my old version of Quicktime and tried to copy my other PC's Quicktime folder into this one however that has not worked. I have also tried using the latest installers multiple times however I always get the same error message.
Please help me fix this error where Quicktime can't install,
Thanks
James

Says windows install package does not operate yet I can install other programs.
What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.)

I have installed the most recent version of Snow Leopard on my MAC, and I am trying to install Mountain Lion from the Apple Store. It will not install, because it says I do not have 2GB of memory, even though I have over 200GB available. Please help.

I have installed the most recent version of Snow Leopard on my MAC, and I am trying to install Mountain Lion from the Apple Store. It will not install, because it says I do not have 2GB of memory, even though I have over 200GB available. Please help.

Welcome to the Apple Support Communities
One thing is the memory, and another thing is the hard disk space. You are telling me that you have 200 GB of free space on the hard disk, but the App Store is telling you that you have to install 2 GB of memory or more on your Mac if you want to upgrade to OS X Mountain Lion.
First of all, open  > About this Mac > More Info, and copy "Model Identifier" here, so we can know what Mac you have got and how much memory you can install.
We recommend to buy the memory in OWC or Crucial (Crucial is cheaper and offers the same compatibility warranty as OWC) because you won't probably have any problem with the memory you buy there

The new ACR 5.5 update will not install in Elements 7.0

Hello All:
This situation is now becoming ridiculous (well, for me that is). I just tried to install the new ACR 5.5 update and it is "unable to install" into Elements 7.0. I downloaded the update several times, unzipped the install file, but when trying to install, it just gives me a message that it is unable to install and to hit the "quit" button.
I have a Vista 64 Bit system with 12 Gigs of RAM. I've installed Elements 7.0 and Lightroom 2.5 on my system - all with no problems. For some reason, I could never get Photoshop CS-4 to install at all and I've been through the mill trying to install Photoshop - but nothing worked and had to eventually give up. Trying to get Adobe support for CS installation on my 64 Bit system has been ridiculous in this regard as each and every time I called, I was connected with some techrep located in India who all they did was "parrot" back what I told them - how frustrating. But as I mentioned, Elements 7.0 and Lightroom installed just fine.
The previous ACR 5.4 installed just fine into Elements, but now...ACR 5.5 will not install. It tells me that I do NOT have CS-4 installed so it cannot install. What's up with that? Has Adobe stopped supporting the latest ACR upgrades for Elements? What gives?
Does anybody just have just the newest ACR 5.5 plug-in by itself that they can send me so I can just put it in my plug-ins folder (or a place where I can download it)? Adobe used to just have the plug-in that you could unzip and copy and paste and put it into your plug-in folders - but not anymore. Now they make it an 82 Meg install program and thus some of my problems.
Can anybody help here? Why does the install program look for CS-4, yet overlook Elements 7.0 completely. Helpppppppppp.
Ben

Hi Benherrmann,
Sorry to listen that you havent been able to install the Camera Raw 5.5 plugin.
But as far as my knowledge goes for PSE, PSE never lists Camera Raw plugin for updates in the Updater Preferences dialog i.e., if you will launch Help->Check for updates, a updater window will open. If you will check the preferences of that updater dialog, it will tell you that it never checks for updates for Camera Raw plugin unlike what happens in Mac. In Mac Camera Raw updates does get installs just by installing PSE(v6 of course as there is no PSE7 for Mac. Hopefully there will be a v8 for Mac by the end of october as seen in the last release).
Dont know exact reason why Adobe had configured it in that way? why there is some difference between Win and Mac.
So it prompts me that somehow you need to install Ps CS4 on the machine to get the patch installation through updater. Although this is not Ps forum, would you mind telling what error/issues are you facing while installing Ps CS4?
Regards,
Ankush

Java applet will not install in browser

My VI will not install a JAva Applet. I jsut keeps saying "Installing Java Applet" and it never prompts for an install or anything. Any ideas? Is there something extra that I need to do that I am not realizing? I attached a screenshot of the window where is says installing.
Solved!
Go to Solution.
Attachments:
Capture.PNG ‏54 KB

How are you trying to install the java applet? Through a website? Calling an installer?
Could it be that the applet already installed on the computer?
Has it ever worked?
Applications Engineer
National Instruments
CLD Certified

Macbook Pro SMC update 1.3 will not install

Greetings,
I am having problems getting the latest SMC update to install on my 15" Macbook pro. My built in drive has a boot camp partition, so I understand if the update won't install using that. But When booting off freshly GUID partitioned and HFS+(journaled) formatted Firewire 400 drive (Leopard installed and updated to 10.5.7) SMC 1.3 update will not install and gives same error "Your firmware can not be updated because the hard drive partition scheme may not be supported. You must be booted from a GUID partition or RAID scheme." Huh?
I tried the update pushed down by software update, and a manual download.
Current SMC version showing in system profiler as 1.16f10
Anyone else experience this or have any suggestions?

"...hit the hardware start button, get gong, machine starts to boot, something briefly flashes on the screen"
Hi Bob, you have to hold down the start button(5-10secs) until you hear a long tone. Then let go and everything is ok.
You'll also see the progress bar install the update, that is what the brief flash was but because the button wasn't held for a few seconds, it didn't take.
Message was edited by: musashi88

Dreamweaver will not install

Similar Messages

Maybe you are looking for