Dreamweaver with CourseBuilder Extension

Hi,
I want to give CourseBuilder extension a run before I decide on purchasing it for eLearning projects. I already own Dreamweaver CS4, so is there any way I just get a trial version of this extension, or can I simply download Dreamweaver from the Elearning package with the extension installed?
GF

I would like to give a BIG thanks to fosgha for posting this solution!
I was in exactly the same boat (installing my old Studio 8 on a new Win7Pro machine) and I was going out of my mind trying to figure out how to get Coursebuilder up and running. The suggested solution (turning off UAC or, in my case, pulling its slider down to minimum, then rebooting) did the trick in an instant. I wish all my problems got solved this easy...;^)

Similar Messages

Compatibility question with Dreamweaver 8/Coursebuilder

We are putting together our first web-based training using
Dreamweaver 8 with the Coursebuilder extension. We aren't sure just
how involved we will be in web-based training. If we get quite
involved in it and later want to use Authorware, will we be able to
open and use our Dreamweaver 8/Coursebuilder files? Thanks for any
advice.

Well, kinda.
You can load the IE ActiveX contol in Authorware. You could
then use
that control to display the HTML pages. I'm not sure what
that would
really help...but could be that if you have informational
pages you like
the layout of and don't want to recreate in Authorware, you
could use
the ActiveX control to show and navigate between those pages,
then
hide/erase the control when you want to 'return the stage' to
Authorware
for whatever interactions or other information you want to
present.
Erik
Kathy.az wrote:
> We are putting together our first web-based training
using Dreamweaver 8 with
> the Coursebuilder extension. We aren't sure just how
involved we will be in
> web-based training. If we get quite involved in it and
later want to use
> Authorware, will we be able to open and use our
Dreamweaver 8/Coursebuilder
> files? Thanks for any advice.
>
Erik Lord
http://www.capemedia.net
Adobe Community Expert - Authorware
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
samples, tips, products, faqs, and links!
*Search the A'ware newsgroup archives*
http://groups.google.com/group/macromedia.authorware
*The Blankenship Caveat: Note that direct linking to http
content
through any Authorware icon will likely fail if a proxy
server is present!*

Coursebuilder Extensions for CS4 or CS 5

Is there a separate Coursebuilder extension that can be downloaded for CS4 or CS5 or does it only come with the Dreamweaver packaged with the elearning suite? I don't want that suite, but I need the Coursebuilder.

The message you sent requires that you verify that you
are a real live human being and not a spam source.
To complete this verification, simply reply to this message and leave
the subject line intact.
The headers of the message sent from your address are shown below:
From [email protected] Thu Jul 21 10:37:31 2011
Received: from mail.sgaur.hosted.jivesoftware.com (209.46.39.252)
by a2s39.a2hosting.com with esmtps (TLSv1:AES256-SHA:256)
(Exim 4.69)
(envelope-from <[email protected]>)
id 1QjuNU-0029mt-U3
for [email protected]; Thu, 21 Jul 2011 10:37:31 -0400
Date: Thu, 21 Jul 2011 08:37:13 -0600
From: T_Colorado <[email protected]>
Reply-To: [email protected]
To:
Message-ID: <1853097646.6197051311259048003.JavaMail.jive@sgaurwa41p>
Subject: Dreamweaver extensions Coursebuilder Extensions for CS4 or CS 5
MIME-Version: 1.0
Content-Type: multipart/mixed;
boundary="----=_Part_627954_1516001199.1311259033642"
Content-Disposition: inline
X-Spam-Status: No, score=-3.6
X-Spam-Score: -35
X-Spam-Bar: ---
X-Ham-Report: Spam detection software, running on the system "a2s39.a2hosting.com", has
identified this incoming email as possible spam. The original message
has been attached to this so you can view it (if it isn't spam) or label
similar future email. If you have any questions, see
the administrator of that system for details.
Content preview: borggirl <mailto:[email protected]> 07/21/2011 08:06 AM Please
respond to mailto:[email protected]
Â Â To
email address removed
cc Â Subject Dreamweaver extensions
Coursebuilder Extensions for CS4 or CS 5 Â Â Â Â Â Â The message you sent
requires that you verify that you are a real live human being and not a spam
source. Â To complete this verification, simply reply to this message and
leave the subject line intact. Â The headers of the message sent from your
address are shown below: Â From mailto:mailto:[email protected] Thu Jul 21
10:02:57 2011 Received: from mail.sgaur.hosted.jivesoftware.com (209.46.39.252)
Â Â Â Â by a2s39.a2hosting.com with esmtps (TLSv1:AES256-SHA:256) Â Â Â Â
(Exim 4.69) Â Â Â Â (envelope-from <mailto:mailto:[email protected]>) Â Â
Â Â id 1Qjtq3-001rnM-QA Â Â Â Â for mailto:mailto:[email protected];
Thu, 21 Jul 2011 10:02:57 -0400 Date: Thu, 21 Jul 2011 08:02:46 -0600 From:
T_Colorado <mailto:mailto:[email protected]> Reply-To: mailto:mailto:[email protected]
To: Susan Hines Message-ID: <296295950.6185071311256974966.JavaMail.jive@sgaurwa41p>
Subject: Dreamweaver extensions Coursebuilder Extensions for CS4 or CS 5
MIME-Version: 1.0 Content-Type: multipart/mixed; Â Â Â Â boundary="----=_Part_626751_1794222057.1
311256966203" Content-Disposition: inline X-Spam-Status: No, score=-3.6 X-Spam-Score:
-35 X-Spam-Bar: --- X-Ham-Report: Spam detection software, running on the
system "a2s39.a2hosting.com", has Â Â Â Â identified this incoming email
as possible spam.Â The original message Â Â Â Â has been attached to this
so you can view it (if it isn't spam) or label Â Â Â Â similar future email.Â
If you have any questions, see Â Â Â Â the administrator of that system for
details. Â Â Â Â Content preview:Â I did find a work around, but you need
to find someone that Â Â Â Â has the CS4 with the extension (I think it only
comes with CS4 eLearning Â Â Â Â ...
Content analysis details: (-3.6 points, 5.0 required)
pts rule name description

Editing pages created using dreamweaver with microsoft's visual studio express

Here's a quick, somewhat vague, question for anyone who might have an answer. Is there a trick to editing pages created using dreamweaver with Microsoft Visual Studio Express? The reason I ask is I recently finished a web site for my first client who now wants to make edits herself using the program she uses, that being Microsoft. I thought it would be as easy as pulling the html files from the server (or the usb flash drive i gave her), making changes and then putting them back to the server, but apparently she is having some problems. I'm meeting with her soon. I have no experience with any other programs, other than Adobe, so I don't know how much good I'll be in helping her. Maybe it's an easy question, maybe not. Any info appreciated. Thanks!

David wrote -
Dreamweaver template commands are all wrapped in HTML comments, so they
shouldn't cause any problems. They should simply be treated as comments.
However, the concept of editable and locked regions will be ignored.
Hi David, I meant the templates with the dwt extension, not the html files that are created from them. The full version of VS will recognize the dwt extension as 'Dynamic Web Template' but as this is a microsoft extension it does not recognize the code for editing and shows a large number of errors, (before anyone comments the dwt file extension is used by a number of other programs, all referring to a different file type).
PZ

I want to add image name with the extension to db after upload, Can any body help?

Hello there,
Earlier in the week I created PHP photo/image upload form so clients will be able to upload to my site, it worked very well uploading image to designated directory to the C:/path/ but there is more that I would like to do with the form, and that is to write the image name with the extension, “Joplateau.jpg” for example in the database after upload. I wanted to use hiddenField but it's not working for me, may be i am not doing it right. If any one has an idea how to do this please let me know, and thanks in advance.
Thanks in a lot.
Joplateau.

Server-side coding questions are best answered in the Application Developers forum:
http://forums.adobe.com/community/dreamweaver/dreamweaver_development?view=discussions
Nancy O.

I want to add image name with the extension to db after upload in PHP, Can any body help?

Hello People!
Earlier in the week I created PHP photo/image upload form so clients will be able to upload to my site, it worked very well uploading image to designated directory to the C:/path/ but there is more that I would like to do with the form, and that is to write the image name with the extension, “Joplateau.jpg” for example in the database after upload. I wanted to use hiddenField but it's not working for me, may be i am not doing it right. If any one has an idea how to do this please let me know, and thanks in advance.
Thanks a lot.
Joplateau

Server-side coding questions are best answered in the Application Developers forum:
http://forums.adobe.com/community/dreamweaver/dreamweaver_development?view=discussions
Nancy O.

How to use spry in the dreamweaver with the php/mysql

hello,
Iam new to the spry framework
and i want to know can we use the spry in the dreamweaver
along with php / mysql code
if so please tell how to do this
thanks in advance

swetha123 wrote:
> but when i complie this page it is not showing the
preiew or any thing in the
> browser i saved this page with the extension .php if i
run the same page with
> .html then i can see the design but it is not being
executed
The reason you get nothing when you save the page with a .php
extension
is because you have display_errors turned off, so you can't
see the
error message telling you there's a syntax error. The
semicolon is
missing at the end of this line:
> echo "<font color='white'>Hello
Swetha</font>"
The reason it doesn't work with an .html extension is
probably because
you haven't uploaded SpryAssets/SpryTabbedPanels.js. I have
copied your
page and tested it locally with the correct JavaScript file,
and the
tabbed panels work as expected.
There are lots of other mistakes in your page. You can't use
float and
position:absolute on the same element. In at least one place,
you have
used </br> instead of <br />. You have also got
an closing paragraph tag
after the paragraph that contains abc.jpg.
Getting Spry or any other JavaScript library to work
correctly relies on
good, clean code. Your mixture of inline styles and font tags
is going
to make it difficult to incorporate Spry into your pages. I
suggest you
improve your HTML and CSS before bringing Spry into the mix.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Dreamweaver 8 FrontPage Extension Support?

Hi All,
I have posted this question in the Exchange Forum but I have
not received a response so I am expanding the question to the
General Forum in the hope that one/some of you have seen this
problem.
I have a client that requires me to work with a FrontPage
enabled server and to use FrontPage extensions. As some of you may
know there is an Extension, published by Adobe, that enables DW and
DWMX 2004 to work with FrontPage Extensions. These extensions
create an additional drop down menu item option in the 'Remote
Info' Category of the Site Definition Wizard.
However, the latest extension (for DW MX 2004) does not work
in DW8; the extra FrontPage extension option fails to appear in the
Site Definition wizard's Remote Info Access category.
Does anyone know how to enable DW8 to work with FrontPage
extensions and FrontPage enabled servers? Should the MX 2004
extension work in DW8? Should I be using a different exchange
download or can the MX 2004 extension be modified locally to allow
access to the FrontPage Extensions?
Any help, as always, is much appreciated.
Thanks.
Nick Barling
www.barkingweb.com

Before doing anything else, take a couple of weeks to
gothrough the DW
tutorials, and also to study HTML and CSS. The more you know
about those,
the easier your transition will be. DW expects alot more from
you than FP
did, and as a result, you may find it much more frustrating
to have the raw
reality of web development staring you in the face rather
than the wizards
of FP.
> Is there a way to convert a Frontpage site into a
> Dreamweaver site
1. I'd define a Dreamweaver site that points to a location on
your hard
drive for the local site's root, and to the current FP site
on the web as
the remote site
2. I'd use Dreamweaver (if your host supports FTP
connections) to download
the remote site to the root of the site you just defined on
the hard drive.
This will pick up all the pages *after* webbot action so that
shared borders
and all are already present in the page HTML. This will also
pick up all of
the server scripting. Note - in the event that you are not
able to connect
using FTP since some FP hosts block that protocol, you will
have to use a
third party 'site copier' like Black Widow, QuadSucker, or
WebCopier, (or
even the DW extension called SiteAssist from WebAssist) to
connect and
download using http protocols. Doing it this way will *not*
retrieve any of
your server-script code, if any (unless you have used the
WebAssist
extension).
3. I'd create a DW template for the pages, that captures the
"shared
border"
effect you had in FP.
4. I'd copy and paste content from each FP pages to a new
template child
page and then save the new child page with an easily
identifiable
nomenclature that is distinct from what was used on the FP
site (since you
are saving the new child pages into the same local site as
the FP pages).
5. When the basic site is completed, I'd upload the new DW
pages to some
staging area/webspace, and by using the browser, I'd verify
that the site
(as it now exists remotely) is complete.
6. Then I'd create a *new* DW site in a new location on the
hard drive, and
connect to and download all the files from the staging site.
7. You can now delete the original FP site from your local
system if you
want.
You now have a complete site (minus any of the FP extension
server-side
code) that has no FP footprint.
If you have used any FP server extension functions on the
original FP site
(form processing, guestbooks, tables of contents, etc.), you
will have to
recreate those functions in DW using 3rd party scripts, or
scripts that you
write yourself.
If this site will continue to be 'touched' by FP, don't even
think of using
DW on it.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"robtattam" <[email protected]> wrote in
message
news:[email protected]...
> Hi, I am a newbie to using Dreamweaver.
> I am having a problem importing a site that has been
running in frontpage
> into
> dreamweaver.
> I run through the wizard but when I have finished the
wizard and it closes
> the
> program down, I re-open but yet my website is not in the
files section to
> the
> right of the screen.
> I have tried creating the folder and then drag and drop
into it, it seems
> to
> see the files, however does not recognise the documents.
> I am using the 31day free trial. Would this make a
difference??
> If anyone could help me to imoprt my frontpage site into
dreamweaver then
> you'll have a friend for life!!!!
> Please help a highly frustrated newbie??!!!
>
> Many thanks in advance
> Rob
>

Hosting type-Ecommerce with paypal extension

If I create a website with paypal e-commerce extension cart, does my client still need the ecommerce type of hosting to ensure security?

Hi Chris,
I think that the easiest way to do ecommerce sites these days is with CMS (content management systems) like Joomla, Wordpress, Drupal or OS commerce.
My preference is Joomla some info in my experience here:
http://www.anonsolutions.com/Joomla-Web-Designer-Canada.html
A Joomla site will do all the ecommerce stuff automatically.
You can even design the site in Dreamweaver (free Joomla extensions exist) and either you can convert it to Joomla yourself or I can do it for your client.
Thanks,
Bruno

Dreamweaver Adobe BC Extension showing blank window

I´ve had this problem with Dreamweaver´s Adobe BC extension a year and a haft now:
Is simply blank. The window where is supposed to show the USERNAME + PASSWORD rectangles to write them down.
I tried everything in all forums: install/uninstall AdobeBC Extension and DW CS5.5, update extension etc.. And Nothing happnes.
At first, DW was working ok with the extension (1 and a haft year ago, when I first installed DW) And suddenly, it just stop working and showing just a blank space.
If u have any suggestions, please let me know. I´m tired and frustated with this problem.
MAC OSX Lion 10.7.3 version vy the way.

or... BLANK Cloud Screen http://forums.adobe.com/message/5484303
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

Dreamweaver CS5.5 extension: create ZXP or MXP?

Hi,
I'm new to creating extensions for Dreamweaver. I found a PDF document entitled "Packaging Extensions with
ADOBE® EXTENSION MANAGER CS5" and it seems to indicate that you need to create a ZXP file when creating an extention for CS5 and above. Does this apply to Dreamweaver extensions? Are all of the extension gurus out there creating ZXP files or are they creating MXP files for Dreamweaver CS5 and up extensions? Here is a link to the PDF document: http://help.adobe.com/en_US/extensionmanager/cs/using/packaging_extension.pdf
Thanks,
Laura

Hi Laura
If your extension is only for DW5 or above then create a ZXP file as this will prevent anyone with an older versions of DW installing the extension. But if it will work in previous version then MXP is the file to create, as this can be installed in all versions of DW including DW5 or above.
When submitting your extension to the Adobe Exchange or even if you only offer it as a download from your own site, always indicate the version you are targeting and/or if it will work/has-been-tested in a previous version.
PZ

Extending dreamweaver with custom ssi functions ?

Hi
I read many posts about ssi and virtual function. Il could'nt find answer to my problem.
i want to use all the capabilities of DW for ssi inclusion using php virtual function :
absolute path from site root, visual rendering in creation mode, automatic path calculation ...
but i don't want to use virtual function, because i'll won't be all the time on apache server.
i don't want to use native require or include php function because my framework need absolute path from site root.
I would liket to tell dreaweaver to treat myIncludeFunction() exactly as it does with virtual function.
so i was expecting to extend Dreamweaver with customs tags. I read part of the Frecnh manual, extending dreamweaver
but i couldn't manage to do this.
Someone know the issue, or extensions taht could do this ?
Thanks
(sorry if my english is not good, my french is better )

"Joris van Lier" <[email protected]> wrote in message
news:fghlrc$ka$[email protected]..
> Hi all, I'm looking for a way to extend the Dreamweaver
DOM object with
> custom functions.
> In this case I need to backport the copyAssets function
>
http://livedocs.adobe.com/en_US/Dreamweaver/9.0_API/dwr_pagecontent_cn_088.html
> for earlier versions of dreamweaver and reroute calls to
an existing of
> custom implementation.
>
> My idea is to create a Startup Item that uses the dom
object as prototype
> and extends or overrides certain functions, but then:
how should I tell
> dreamweaver to use that object instead of the normal
DOM?
>
> --
> Joris van Lier
I'm still looking for the preferred/recommended way of doing
this,
does anyone have a bright idea?
Joris van Lier

How do I share access to Dreamweaver with a colleague of mine in a separate location?

How do I share access to Dreamweaver with a colleague of mine in a separate location?
I currently have DW loaded onto my desktop. I am presuming that if my colleague wants to get access to it, I have to copy the DW files I've created and put them onto the creative cloud connection. If that is the answer, How do I do that?
My colleague has already downloaded DW onto his computer - he just can't see the files that I've created, even though I am making sure that my version of DW is always closed when he accesses his version.
Any help gratefully received
Jamie

It is against the standard Dreamweaver license for your colleague to be using your license. Your colleague needs his license.

Extensive (very very very extensive) memory usage of host application with CS extension

Hi!
I tried this only under Photoshop CS5 and InDesign CS5 under Windows 7.
When you open and close CS extension panel, the memory taken by Photoshop (InDesign) increases by 6-30MB!
In case of the simple HelloPhotoshop (HelloInDesign) panel from the examples, compiled in release mode, when you open it and close, - it's about 6-10MB each time you do it. And in case of a more complex panel, which uses AIR, etc. it's about 30MB per one panel close/open.
When I use some panels in 5-10 minutes Photoshop (InDesign) increases its memory pool from 600MB up to 1,2 GB. And more. And this memory is never freed, only until Photoshop (InDesign) shutdown.
I tried freeing all my arrays, killing display objects, etc. - nothing helped. Even a simple HelloPhotoshop (HelloInDesign) that does nothing eats memory.
By the way, InDesign eats memory a lot faster .

James, thank you for the very fast answer! I did various tests on the weekend on my computer and computer of my friend.
And I can say, that Debug flag doesn't affect memory consumption. They still eat memory. My steps to reproduce are as follows:
(Windows 7 32 bit)
Photoshop CS5:
1) set HKEY_CURRENT_USER\Software\Adobe\CSXS2Preferences\PlayerDebugMode to 0
2*) check HKEY_LOCAL_MACHINE\SOFTWARE\Adobe\CSXS2Preferences (just in case)
3) Compile HelloPhotoshop example to ZXP and install via Extension manager
4) restart computer
5) Run Photoshop CS5 - Memory consumption: 100 096 KB
6) Open HelloPhotoshop and close it 10 times
7) Memory consumption: 155 840 - 5,574 MB per one close/open
Maybe a garbage collector is expected to run and free this memory, but it never happened in my case. The memory pool was increasing to 1 GB when I was working with one of my panels - with no documents open in Photoshop
In InDesign I tried the same thing with HelloInDesign ( I had to close the panel completely and then open with Window | Extensions | HelloInDesign)
Memory consumption on start: 118 516
Memory consumption after 10 open/close cycles: 197 516
It's 7,9 MB per one close/open
It's the simpliest panel test. When I'm using AIR libraries the memory usage is increasing a lot faster.

I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open? Next in Elements 11, how do I load and print different pictures and different sizes options on the same page?

I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open? Next in Elements 11, how do I load and print different pictures and different sizes options on the same page?
Thanks,
Shir

sbmgrams wrote:
I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open?
See here:
Reading PhotoDeluxe PDD Files

Dreamweaver with CourseBuilder Extension

Similar Messages

Maybe you are looking for