Dreamweaver won't open same file in two different folders. Fix or switch to Aptana?

Same file copied between 2 folders. DW will open one but not the other. Copied code from 'good' file to new file; saved in 'bad' folder. DW opened the file once then the spinning wheel of death again. All files open in Aptana, Coda, Sublime no problem. 'Bad' file was coded and FTP's previously without problem. Was annoyance previously but not the problem is becoming acute. 'Bad' file opens on Windows7 with DW8; won't open on MAC CS6. Tried every fix posted; still POS.

BTW - this has been a problem for years (plural). I just had accepted that DW did this sometimes. I write a lot of PHP so DW is not my primary software. Couple of days ago, I was doing a customer presentation and it did it again. MY mistake was I copies the development folder to a new folder and upload/took the approved site live. Literally, I could navigate back to the old folder and open index.php but it would not open in the new folder. Copied the old contents to the new folder/file, saved it, opened it and it worked fine. This whole time I am tap dancing in front of a room full of people. Go back to reopen the file and no go. As my face slowly turns bright red, I navigate back to my development folder to open index.php. Surprise, now it won't open either. Luckily for me, I had a copy of Coda2 on my laptop, switched over and sold the job. I mainly use DW for customers where I can split screens - use an 80" presentation screen - for convenience. Was thinking about upgrading from CS6 but 4 and 5 had the same problems which was why I went to 6.

Similar Messages

One file to two different folders simultaneously?

Is there a way to copy one file to two different folders simultaneously?
Maybe a script?
Drew

Thanks for the response Baltwo.
Maybe I shouldnt have said 'simultaneously'.
What I'm trying to achieve is this.
I drop a file into one folder and it automatically copies to ano folder (a redundant back up of the first folder)
Is that possible at all?
Drew

Encrypt/decrypt same file with two different passwords

Hi everyone:
I'm quite new to Java and cryptography in general and have a theoretical question. Is the following scenario possible and how would it be implemented:
Two users with two passwords (say, a regular user and a superuser) encrypt, decrypt, read from and write to the same file. The secret key for encryption and decryption should be based on their passwords (generated from their passwords), i.e. not stored anywhere on the system.
I've been racking my brains but can't think of a way. Am I missing an obvious solution?
Can it be done?
Thanks,
Michael

I don't think you can avoid having more than just a password hash stored on the system. Using a combination of my approach and Jeff's approach I can implement this as long as you allow a password protected key store to be stored on each system. A given user's key store would contain his RSA private key and associated public key together with the admin user's RSA certificate (thought the admin user's public key could be stored in the program since it does not have to be kept private). The admin user's key store would contain only his RSA private and public keys.
Assume that the data file is to be create by a standard non-admin user. His code performs the following actions -
1) Generates a random symmetric algorithm key. Say a 128 bit AES key.
2) He write a digest of this to the output file.
3) He writes the random key encrypted with his public key to the file.
4) He writes his public key (or certificate) to the file.
5) He writes the random key encrypted with the admin users public key to the file.
6) He encrypts the data using the random key writes the result to the file.
This user can then update the file by
1) reading from the file the digest of the random key.
2) reading the random key encrypted with his public key.
3) Decrypting this encrypted random key using his private key extracted from his keystore.
4) Check the digest of this key to make sure he has the correct random key.
5) skipping his certificate and the random key encrypted using the admin user's public key.
5) Decrypting the data using the random key.
6) Update the data.
7) Re-encrypt the file as described in the first part using a new random key.
The admin user can
1) read from the file the digest of the random key.
2) skip the random key encrypted using the user's public key.
3) reading the user's public key from the file (for use later if the file needs to be updated).
4) read the random key encrypted using the admin's public key.
5) decrypting the random key using the admin's private key obtained from his key store.
6) check the digest of the random key to make sure it is correct.
7) decrypt the the data.
The admin can edit the data since he can re-encrypt the data in a similar manner to the way it was created in the first place.

What To Do To Be Able To Use Same Files on Two Different PCs.??

I need to tell each PC that the files are related, since Dreamweaver writes internal code for each file?
What do I need to do? The computers are NOT on a network.
I hope I a clear with my question.
Cheers,
Dreamweaver101.1

Ok,
I want someone to do some work for me using Dreamweaver 8 at their home.
My license allows me to use at least 2 computers.
If they format content for me using my template, I want to be able to upload these file to my web site?
Are you saying unless they are on a network, this arrangement (working at different locations) will NOT work?
cheers,
Dreamer101.1

Dreamweaver CS5 won't open any files from a project

Hi,
I'm working on a simple website. I work on it from 2 different locations (home and work), and the files are stored on a removable USB disk. The problem is that for some reason Dreamweaver won't open any files made on the other computer. It shows the sitemap, eveything. But when I click on a file, nothing happens.
I've tried a couple of things:
1. recreate the site in the site manager - still the same problem
2. remove the preference folder - still the same problem
The only solution is that I have to copy the files to my desktop, recreate the website in the sitemanager and then it works. But only if I copy the files to my desktop, any other location on my HD (not the removable USB disk) simply doesn't work.
Does anybody know why this happens? Or even better, does anybody have a tip of how to workaround this problem?
thanks!

The D600 was first supported in Camera Raw 7.3 which is only compatible with CS6 and later - not CS5 unfortunately.
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
Some options:
FREE
Download the free Adobe DNG converter, convert all D600 Raw files to DNGs then open the DNGs in CS5
http://www.adobe.com/products/photoshop/extend.displayTab2.html
PAID
Upgrade to CS6
Buy Lightroom 5.4
Buy Photoshop Elements 12
Join the Cloud and get CC (subscription only)
Join the Photoshop Photography Program and get Photoshop CC + Lightroom (subscription only)

Error message: "Dreamweaver can't open .jpg files"

I'm using DW 8, and I have installed the 8.0.2 update. I'm
having trouble inserting certain JPG images into a site. I get an
error message pop-up that states "Dreamweaver can't open .jpg
files". It will allow me to insert some jpg files, but not all of
them. I've tried drag & drop and going through the Insert menu.
The files are not large at all. Doesn't appear to be any problem
with png's or gif's. It's incredibly frustrating. Anyone have any
suggestions? TIA.

> why was i taught that all my web images need
> to be in 72dpi if it doesn't really matter?
most people suggest 72 because it was an old standard with
the early
macintosh DTP programs. For web use it's easier to
standardize on it because
when you make an image, you have to put ~some~ number in the
resolution box
and it might as well be 72 as any other number. It simplifies
moving image
files around in different applications if they are all the
same resolution.
For display in a browser, these will all have the same file
size and display
size in a web page:
600x600 pixels at 1dpi
600x600 pixels at 72dpi
600x600 pixels at 6000dpi
It's when they are used in other applications or when a
direct url like
/photos/1.jpg is printed out that they may display in the
resolution, not
the pixel dimension.
I came across a page once where the designer always saved his
images with a
resolution of 6000 dpi or some other odd number because he
thought that if
people dragged the image off the page to save it- most of
them wouldn't be
able to resize it. or some other idiot reason maybe.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists

Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists follow link: http://www.adobe.com/go/kb407111. Have installed Bridge 5.0.2.4; Raw Ref Version 7.0.0.308; DNG converter_8_7_1.dmg; Bridge 5.0.2 Update 2. Also same problem with Lightroom which I don't normally use. Lightroom_3_LS11_mac_3_6.dmg installed.

In the link you posted it states that the Nikon 810 requires ACR 8.6 or newer.
Version of ACR are specific to versions of Photoshop. You cannot use 8.6 nor even 7.0.in CS5.
I believe that ACR 6.7 is the latest that will work with CS5, so make sure you have this installed and get rid of ACR 7.
Having 2 versions of ACR will cause problems.
You have already downloaded DNG Converter 8.7.1.
Have you double clicked the DMG file to allow you to install DNG Converter on your computer?
Be aware that DNG converter is a stand-along application and not a plug-in.
You need to open DNG converter at select the FOLDER that contain your .NEF files.
Don't open the folder and try to select individual files, it doesn't work that way.
After converting your D810 files to DNGs you can then open the DNGs in CS5
The problem is your camera didn't exist when CS5 & its version of ACR was developed.
i don't use Lightroom, but the list mentions Lightroom 5.6 as needed to open D819 so your 3.6 version of LR won't cut it.

Safari won't open pdf files on my iphone 5c

Safari won't open pdf files on my iphone 5c. Whenever I try to open a link leading to a pdf from say the google search page it won't load up. If I touch-and-hold, the. choose "open", I get taken to a blank page. There are not buttons, like the one that offer to open the pdf in iBooks for example. I get the same result in the google Chrome app.

Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
/Library/Internet Plug-Ins
Click Go
If you see this plugin: AdobePDFviewerplugin
Move it to the trash, then quit and relaunch Safari and try a PDF file.

How do I open same file twice in LR into Photoshop

I like to work on the same image in two different windows in photoshop. I like to see different options with editing on two or sometimes open the original image again to apply image to tone down editing. When I click open in photoshop through LR4 it just goes to the file I was working on and doesn't open new copy. How can I open same file twice in raw format? I was able to do this in previous versions and it just listed copy-...in front of the file name.
Thanks so much,
Melissa

brwmmw wrote:
Thank you Ian, I am running trials of LR4 and CS6 and yes I am making sure I select the right one when I right click open in photoshop. I did this action all the time in the previous versions. There is not a tab or anything within photoshop. Once the file is already open in photoshop nothing happens. If I close the file then I can open again. I am sure this is simple, but I cannot figure it out. I can open it as a smart object and that's it. In the past, it would list copy-"filename" as the file name opened into photoshop a second time.
Melissa,
In Lightroom there is no such command as 'Open in Photoshop'. The command is 'Edit in Photoshop CSx' (x being whatever version of Ps you have installed). I don't know what it is you're trying to achive and from where you're trying to open the file, but I have tried Edit in CSx muliple times on 3 Mac's and a Windows 7 box in past 10 minutes and it works fine.

Quicktime won't open mpg files

I am trying to create a DVD with chapters/scenes from a single .avi file that won't open in Quicktime (nor iDVD nor iMovie). It's the basic QT, not pro. I can convert the .avi file to .mpg (using Burn or other tools), but the resulting file (.mpg) won't open in Quicktime either. Seems if it won't open in Quicktime, it won't open in iDVD or iMovie, where I'd hoped to include chapter markers and menus.
Since this was created by Burn on my Macbook, I'd expect the resulting .mpg file to be readily useable by Qucktime, but it isn't. Can someone first explain why QT won't open the file (VLC will open it), and second what other approach I might use?
Thanks!

OK, again, I'm not using the avi file, but the mpg that was created by Burn from the avi file, so I wonder if the original is so "muxed up" as it might seem. No mpg inside of an avi, if I understand you both correctly. The original AVI is thus far MIA though I do think I burned it to a data disc.
Having the original AVI would let see what compression codecs were used to create it, how compressed the video was, see the encoded dimensions/display dimensions if PAR encoded, and give us some idea as to how much visual quality may have been lost in transcoding the AVI to MPG, as well as, save you one level re-compression if you were then able to start your work flow with the original source file. Too bad you can't find it.
"Muxed" in the case of your MPEG2/MP3 MPG file refers to the fact that the audio and video content is broken into blocks of video data which are interspersed with blocks of audio data in a single data stream to provide synchronizarion. QT files, on the other hand, contain up to 99 tracks of audio, video, and/or other forms of data the playback of which are all sybchronized to an external clocking system and is the main reason your MPG file is not natively QT compatible,
To play MPEG-2 content, whether in an elementary or a multiplexed stream, in a QT based application, you must first purchase and install the Apple QT MPEG-2 Playback component ($20). Even then, for any of the unsupported audio compression formats you would need a secondary application like MPEG Streamclip (free) to bridge the spatial to temporal synchronization problem to make it compatible Apple QT-based applications like QT, iMovie, GarageBand, iDVD, etc. So, if you plan to use the MPG file as your source file, you will either have to purchase the MPEG-2 component or use a third-party application work flow.
All that said, I think I'm understanding how to go about this now. Oddly, I do have Perian installed (I think because I once had a similar problem and had hoped it would help) and it's up to date. It does not seem to fix my problems though.
This is why you need to pay attention to the actual codecs used in the AVI file and ensure that you have removed any third-party components which may conflict with the Perian component package as detailed on the support page of the Perian web site.
I'm using this file to try to learn a little about iDVD and iMovie (after all these years of using Macs!), so I had hoped to take these first steps without buying a commercial product. I don't mind spinning my wheels trying different workflows so long as I'm learning and have options. Garageband is an interesting idea as I had no idea it would handle video files. Perhaps Audacity would also do the trick? I don't have any need of creating markers at any particular points in the file, just something to ease the process of moving from one place to another in the video. Markers at an even time interval would be fine, and I'd love to create a menu that allows navigation, though even that isn't crucial.
To learn more about iDVD, use help file, view the tutorials, and visit the iDVD forum. However, before you can do anything in iDVD, you will have to convert your MPEG2/MP3 MPG file to a QT compatible compression format. On my system, I would simply open the MPG file in MPEG Streamclip (which already has the Apple QT MPEG-2 Playback component installed) and convert the MPEG-2 video to AIC (Apple Intermediate Codec) and the MP3 audio to Uncompressed audio. The resulting MOV file will then import to any Apple QT-based edit/conversion application on your computer (assuming the source file and your software is in proper working order).
I may end up trying Toast as I've considered it in the past and my needs aren't very sophisticated. But being largely without work and mostly self-employed these last two years has made me a bit of a miser...
Toast should save you the cost of the MPEG-2 Playabck component but does cost much more than the $20 component. I am still using Titanium Toast 10 Pro but it may be aout time to upgrade to 11. It is a really good general purpose conversion/authoring appliction for all forms of target optical media.

Photoshop shut down while I drew a picture, now the file is broken and I can´t fix it, photshop won´t open the file and I have tried repearing it with different programs. What should I do?

Photoshop shut down while I drew a picture, now the file is broken and I can´t fix it, photshop won´t open the file and I have tried repearing it with different programs. What should I do? I spent 6 hours on the pic and I dont even have a screenshot or anything.

You don't even say what platform you are on, or any other details that may help others assist you.
If you are on a Mac, try opening your file in GraphicConverter (they have a demo version) if that doesn't open it, nothing will, in my experience.
I assume you have tried Adobe Illustrator already to recover.
You may also have a JPEG of your complete file (flattened) in Bridge Cache.
On the Mac you'd find it in your User ~Library (NOT the Root Library ):
Users > yourname > Library > Caches > Adobe > Bridge CS6 > Cache > 1024 > jpg(fileID)number Filename.psd.jpg
The user ~Library is hidden, but you can make it visible for an moment or two. Ask Apple if you don't know how.
I don't do Windows.

Help! PS won't open any files!

Well i did a system restore and now PS won't open any file, it was working FINE before i did the system restore, I have flash and dreamweaver also installed and they're working fine!
I open PS everythings fine, but when i try to open ANY file i get this error
- adobe photoshop cs3 extended photoshop.exe - fatal application exit
the specified module could not be found C:\program files\common files\adobe\adobe version cue cs3\client\3.10\versioncueui.dll
Then when i clicked "Ok" got this error
the instruction at "0x5ad71531" refrenced at memory at "0x00000014". The memory could not be read.
I don't know what to do anymore, i've reeinstalled it again probably 15 times by now and it still doesn't work.
I did something i found on google and i deleted this folder C:\program files\common files\adobe\adobe version cue cs3\
But it still doesn't works!
I really need help! I've had this problem for about a week and haven't found yet a solution!
Please help!

Um its set to Microsoft XPS Document writer....
abd Ed... I did try stopping it but there is nothing running
The setup process is called Setup.exe, well there is nothing running with that name but it says it is... when its not...

Dreamweaver can't open .jpeg files...

When I try to insert a jpeg image onto a page, i get this
message: Dreamweaver can't open .jpeg files. Please choose an HTML,
XML or other compatible file. Most all of my images are jpegs and
I've never had a problem with them before. Any ideas why this is
happening now?

"DJ Website Designer" <[email protected]>
wrote in message
news:ft3bpb$pub$[email protected]..
>
quote:
Originally posted by:
rtadobe
> thanks for your responses and sorry for the confusion -
i'm not totally up
> on
> lingo. I have an image created in photo shop called
forum.jpg. And yes,
> the
> error message says "can't open .jpg files..." not "jpeg
files." I get this
> message when I try to drag the photo into place on the
page. If I try to
> do it
> using the insert function (from the insert tab) the
image will be placed
> but is
> just a gray box and in my browser comes up as a box with
a red X in it.
> I've
> been placing images on this site for a couple of years
and have never had
> this
> problem...
>
>
> When you say that DW can't "open" a .jpg - do you mean
you cannot see the
> .jpg
> you have placed (inserted) on a page you created?
>
> Does the gray box have the "broken link" symbol?
No, he said that DW gives him an error message: "Can't open
JPEG file" and
won't allow him to insert the file.
Patty Ayers | Adobe Community Expert
www.WebDevBiz.com
Free Articles on the Business of Web Development
Web Design Contract, Estimate Request Form, Estimate
Worksheet

Adobe Bridge CS6 (Mac) won't open .arw files from my Sony RX100. How do I get and install the right version of Camera Raw?

Adobe Bridge CS6 (Mac) won't open .arw files from my Sony RX100. I was told to update Camera Raw to at least 7.2. I tried to download this but got a DNG Converter instead. Where is Camera Raw? (it does not show up in a search of my hard drive. There is a folder of camera profiles but no extension or plug-in with this name). How do I find out what version I have already? How do I get the correct version? . . . OR . . . is it the case that Bridge will never open Sony raw files directly and I will have to do a separate conversion process every time I want to use a raw file??. Can someone explain this?
Thanks.

A Good samaritan answered this for me on another forum
How to update Camera Raw

How come pages won't open PDF files made by Pages?

How come pages won't open PDF files made by Pages?
I have files I made with Pages and exported as PDF but I can't open them with pages to edit?
Also, where are the recent files created by pages located? Can't find those to open either..

Hi Tom,
I was delighted when I signed up for Pages. Clunky yes, but it worked. I've been a graphic designer on a Mac for 25 plus years and have logged too many horror stories of "upgrade" wars which cost me massive lost time, data and money forcibly extracted just so I could finish a project.
When I first used Pages in April of 2012? or there about, I was able to open Word documents exported to .pdf format, emailed to me, which I then dragged into Pages. I could make the changes I needed to make, export as a .pdf, return it back to my client which they could then edit on whatever it was they were using. I'm not a neophyte with this. I've had Original Photoshop as a stand alone, Quark (which locked users out 6 months after I purchased it.) Quark again, Freehand, Pagemaker, Illustrator, Photoshop again, Creative Suite for several upgrades, Acrobat Pro. 2 years ago I lost 6 years of Quicken data and had to and "upgrade" start over. This last go around I had to "upgrade" my Apple ID - yes I had 2 on purpose, lost my Pandora One and my ability to get into the Tulsa County Library website.
At this point, I'm retired and feel like what I've paid for in the past should WORK today. I have a 100+ page cookbook in Quark which I was able to export as a .pdf, that I've lost the tags too, Easier to start over. I have artwork that is hundreds of megs in Photoshop. Not the least bit interested in anybody's "cloud".
Thanks for letting me vent. I'm determined to keep my equipment and software up to date so I can enjoy the skills I've acquired, but I completely cringe at Apple's antics. I truly hate it when I have to respond to some new "tip" or product offer. BooHiss. Happy Turkey Day. Pages is a "turkey" program.
Best regards, mbd

Dreamweaver won't open same file in two different folders. Fix or switch to Aptana?

Similar Messages

Maybe you are looking for