Dreamweaver x64

I installed dreamweaver from creative cloud but my computer is 64 bit and I installed the 32-bit version as I do so that it is the version of 64 bots?

Available as either 64-bit or 32-bit applications:
Photoshop CC
Bridge CC
Illustrator CC
InDesign CC
InCopy CC
Lightroom 5
Available in 64-bit only:
Flash Pro CC
Premiere Pro CC
After Effects CC
Audition CC
Prelude CC
SpeedGrade CC
Available in 32-bit only:
Dreamweaver CC
Muse CC
Edge Animate CC
Edge Code CC
Edge Inspect CC
Edge Reflow CC
Acrobat XI Pro/Std

Similar Messages

How can I get Windows (v7 x64) to open in Dreamweaver (CS5) if I right click it?

Hi
How can I get Windows (v7 x64) to open in Dreamweaver (CS5) if I right click it?
None of the normal mechanisms of setting an application to be the DEFAULT application for the .HTML file type seem to work...
Extremely irritating.
J

Jon Fritz II wrote:
So when you right-click an .html file and choose Open With, what are you seeing?
Is the check box for "Always use the selected program to open this kind of file" checked?
A list of various "recommended applications" but not including Dreamweaver. It's not in the list of Other Applications either. And if I browse for it, my selection of dreamweaver.exe is flatly ignored without message.
>Is the check box for "Always use the selected program to open this kind of file" checked?
Jon Fritz II wrote:
So when you right-click an .html file and choose Open With, what are you seeing?
Is the check box for "Always use the selected program to open this kind of file" checked?
A list of various "recommended applications" but not including Dreamweaver. It's not in the list of Other Applications either. And if I browse for it, my selection of dreamweaver.exe is flatly ignored without message.
> Is the check box for "Always use the selected program to open this kind of file" checked?
Yes.
J

Dreamweaver 6 Win 7 Ultimate x64. Crashes /Hangs when using site|New Business Catalyst Site...

Hi all,
I hope someone can help me here.
I have installed Dreamweaver 6 on windows 7 Ulitmate X64. I have also installed patches 12.0.2 & 12.0.3. (My current version is 12.0 Build 5861)
When I navigate through the menus
Site | New Business Catalyst Site...
The dialog appears and the application grays out. Then it will sit with the timer until I click on the blank dialog. At which point Windows performs an APPCRASH
Problem signature:
Problem Event Name:          APPCRASH
Application Name:          Dreamweaver.exe
Application Version:          12.0.3.5861
Application Timestamp:          50be54e4
Fault Module Name:          KERNELBASE.dll
Fault Module Version:          6.1.7601.18229
Fault Module Timestamp:          51fb1116
Exception Code:          e06d7363
Exception Offset:          0000c41f
OS Version:          6.1.7601.2.1.0.256.4
Locale ID:          2057
Additional Information 1:          7fdd
Additional Information 2:          7fddb5d7ac5be2d68e8c7847b585232e
Additional Information 3:          6544
Additional Information 4:          6544ff2b28432e179aaa41ed0f3a3030
Thank you advanace
Huet

Does BC require any special ports open inbound for it to work. I have managed to get it working on a DW 5 install with the BC plugin but on a different machine! Still no joy with DW6 :-(

Having trouble updating Dreamweaver CC on Windows 7 x64

I'm having problems starting a couple of days ago updating Dreamweaver CC on Windows 7 x64. Have had no issues the past couple of months.
Specific message: "Update Failed. Download error. Press Retry to try again or contact customer support (49)

jh_photos wrote:
http://swupdl.adobe.com/updates/oobe/aam20/win/PhotoshopCameraRaw7-7.0 /7.2.82/Setup.zip
I checked the link for the link Camera Raw 7.2 Windows. I just don't trust links like that, and worse yet, the download file is called Setup.exe.
Not for me! It's Setup.zip and it opens as a zip archive via Explorer. Specifically:
http://swupdl.adobe.com/updates/oobe/aam20/win/PhotoshopCameraRaw7-7.0/7.2.82/Setup.zip
If it looks like Setup.exe to you, you're right to be suspicious!
-Noel

Win X64 and Dreamweaver

I am just curious to see if I am the only one running X64. I
could not get the 8.0.2 update to take and after searching the
forums here, I am convinced that it is my operating sytem. I do no
have any problems running any programs but the update. Photoshop,
Illustrator, Indesign, Dreamweaver, Fireworks and all my MS
applications work great. Just the updater for DW 8.0.2 is the only
problem.

Say Andrew,
You claim that Adobe completely ignore x64 support. It is all
rant, misleading and inaccurate.
I am pretty darn sure that Adobe system developers and
engineers are well aware of this issue. Perhaps that you need to be
either patience for next release or make some constructive,
professional and netural feedback about X64 support. Ideally, it is
a good time for you to address this issue around CS3 products
development currently under development and being engineered for
next release.
I'd be honest with you, I don't know what is going to happen
between now and for next few months, what is going to happen if CS3
supports X64 platform/architecture, perhaps for sure in time by CS4
(perhaps other 18 months plus the pre-CS3 release few months from
now)...
It is fair for me to say that, however, it will be benefit to
all of us and Adobe system engineers if you address this issue by
send feedback email. For now, and until then, sit tight and be
patient, I guess.
Happy Holidays, DWD
quote:
Originally posted by:
virnuls
Yes, I'm running Windows XP x64! I can't run the updater,
either - 8.0.1 was fine, but 8.0.2 says that it was interrupted
when it wasn't, and never has been.
Oh, and Flashpaper doesn't work, either.
Adobe/Macromedia seem to have almost completely ignored x64,
whereas I've got drivers for all my hardware and everything else
works happily - do a search for almost any term and "x64" and this
site, though, and there are no results found.
Andrew

Adobe CC - Dreamweaver PhoneGap Problem - Win7 x64 Pro

Hallo
Ich habe Probleme mit der PhoneGap Anbindung im Dreamweaver.
Meinen Adobe Account habe ich laut Anleitung mit PhoneGap verbunden.
In den Dreamweaver Vorlagen fehlt mir die jQuery PhoneGap Vorlage. Dort sind nur die normalen jQuery Vorlagen gelistet.
Wenn ich dann eine normale jQuery Vorlage öffne und speichere und den PhoneGap Build Service öffne, bekomme ich nur die Meldung "Öffnen Sie eine Site, bevor Sie fortfahren, oder erstellen Sie eine neue Site.".
Das Anmeldefenster, wie man es in diesem Video sieht: http://tv.adobe.com/de/watch/lerne-dreamweaver-cs6/phonegapapps-erstellen-und-hochladen/ erscheint bei mir erst gar nicht.
Bei den Einstellungen für PhoneGap werden mir auch nur Android und WebOS aufgelistet. iOS, Windows Phone und so weiter fehlen.
Was mache ich hier Falsch?

Hallo,
habe das gleiche problem nur auf Mac, hast du eine Lösung parat?

ERROR: Failed to install Microsoft Visual C++ 2012 Redistributable Package (x64). during Dreamweaver CC installation. Help?

Any suggestions as to how to remedy?

Jbruced1234567 the Microsoft Visual C++ 2012 Redistributable is a component of your operating system provided by Microsoft. I would recommend reinstalling this component if it has been damaged. You can download the Redistributable packages at Latest Supported Visual C++ Downloads.

Adobe Dreamweaver CS5.5 - Windows 7 - Java Script Problem

I am having trouble with Anchor.htm.
When I try to insert an anchor in the text (Insert > Named Anchor> I get this error message:
"While executing insertObject in Anchor.htm a Java Script error occurred."
I recently downloaded both the 32- and 64-bit Java Script applications when I received a message that the existing version of Java Script was out-of-date. Anchor.htm worked before I installed the update.
The files I downloaded and installed are:
jre-7u9-windows-i586.exe
jre-7u9-windows-x64.exe
Please can anyone help me with this problem?

From Dreamweaver FAQ
http://forums.adobe.com/thread/429114
"If Dreamweaver is acting erratically, or if you see a message saying "the following JavaScript error(s) occurred", it's usually a sign of a corrupt cache file. The first thing to try should always be to delete the file cache. If that doesn't work, delete your personal Configuration folder. Full instructions are in Deleting a corrupted cache file.
http://forums.adobe.com/thread/494811"
Nancy O.

Adobe Extension Manager CS5 wont work on Windows 7 Pro x64 only on XP Mode in Virtual PC

I am on Windows 7 Professional 64 bit operating system on HP ProBook 4720s with XPMode in Virtual PC activated
I run Adobe Extension Manager CS5.exe as Admin and the log files has only 3 lines
[DEBUG] Sat Apr 16 10:33:53 2011 (d:\extensionmanager_5.0.1_win\20110110.5_0_1.334\trelo\source\manage r\win\owlmain.cpp,941) -OWL environment initializd OK
[DEBUG] Sat Apr 16 10:33:53 2011 (d:\extensionmanager_5.0.1_win\20110110.5_0_1.334\trelo\source\manage r\win\owlmain.cpp,944) -C:\Program Files (x86)\Adobe\Adobe Extension Manager CS5
[FATAL] Sat Apr 16 10:33:53 2011 (d:\extensionmanager_5.0.1_win\20110110.5_0_1.334\trelo\source\manage r\win\owlmain.cpp,982) -Failure to create SWf window
I noticed that the drive d: doesn't exist on my computer; there was only Local Disk (C:) and HP_TOOLS (F:)
I have installed Adobe Creative Suite CS5 in Windows XP Mode in Virtual PC and Adobe Extension Manager CS5 runs OK but I am in Windows XP pro SP3 not in Windows 7 Professional x64
How do I make to run Adobe Creative Suite CS5 correctly in Windows 7 Professional 64 bit operating system

I have the same problem.
I installed Dreamweaver CS5 and Adobe Exchange Manager for CS5 too in my Lenovo 760p Windows 7 x64.
The extension not open and appear this errors in the log.
[DEBUG] Tue Apr 19 07:36:54 2011 (d:\extensionmanager_5.0.1_win\20110110.5_0_1.334\trelo\source\manager\win\owlmain.cpp,94 1) -OWL environment initializd OK
[DEBUG] Tue Apr 19 07:36:54 2011 (d:\extensionmanager_5.0.1_win\20110110.5_0_1.334\trelo\source\manager\win\owlmain.cpp,94 4) -C:\Program Files (x86)\Adobe\Adobe Extension Manager CS5
[FATAL] Tue Apr 19 07:36:54 2011 (d:\extensionmanager_5.0.1_win\20110110.5_0_1.334\trelo\source\manager\win\owlmain.cpp,98 2) -Failure to create SWf window
I tried to open the extension manager as Adminstrator and not open.
Please tell us what is the issue?
I bought all the webassist extensions but i can´t install for it.
Best regards,
JG

Template url problem in Dreamweaver CS4

Hi there,
Thank you very much for reading this post. I am having a problem with templates in Dreamweaver CS4, I am following the correct procedures to build a template, but when I link the pages together and update the template, the url has not been changed/updated on the child pages.
Here is an example:
Template:
../content/section/pagename.html
Child Page:
/section/pagename.html
Missing out the first part of the link, when the pages are loaded, obviously, they are not going to the correct part of the website
Please, can anybody give me some advice, as this problem is very quickly, driving me mad.
Thank you.
John

I observe this problem too on my Vista x64 machine with CS4
using dual monitors and split code/design views, and have found
others who have this problem by searching Google.
Description of problem: Roughly 50% of the time, when
switching between files (regardless of type) and trying to select a
block of code with my mouse (dragging over some code with the left
button), it appears to work normally (the intended code is
highlighted). However, when then attempting to CTRL-C (cut) or
paste, the selected code instantly changes to a much larger block
of code (usually selecting a specific div block or something). The
cut or pasted code is then the larger (unintended) block of code.
Once the code view selection works for a particular file
(either it worked from the start or I poked at it long enough to
work), it seems to remain working until switching to another file
and then returning.
Also, Dreamweaver CS3 didn't have this problem, so it's CS4
only.
This is a workflow nuisance much like a word-processor
deciding to insert a % character randomly every 10 seconds while
typing.
I found a Google groups thread
here
in which a poster writes that deleting the Dreamweaver
configuration file fixes this temporarily (the problem eventually
shows up again, and you lose all your customizations by doing
this). The posters in this thread also describe the same problem
with other hardware configurations.
My current workaround is to type return then backspace when
dropping in to the code-view of another file--kind of a pain, but
at least predictable. I also tried avoided the issue by: (a)
selecting something in the design view and then selecting something
in the code view, and/or (b) telling Dreamweaver to show the
"element view" (right click in design view, element view, Full),
but this latter action may be superfluous.
I'd be very interested if someone were to post a simple fix
for this problem.
thanks!
JP
PS. David: I've learned a lot from your books. Thanks for
writing them!

Dreamweaver CS5 fails to open XP-Resolution Here!

Hi,
We had an issue with Dreamweaver CS5 opening under a standard user on XP Pro SP3.
The resolution....
Open msconfig and disable everything to do with Adobe. Simple! Don't mess with config files, re-install; it doesn't work! Stopping Adobe things from running seems to so far.
Before Dreamweaver will show the green startup box and then completly close, no error, warning, crash, etc.
The proceedure as follows:-
Start > Run... type msconfig
Startup Tab
Untick anythings that has Adobe in its program line/path
Click Apply/OK
Restart
Tick the box for the msconfig window to not show, then click ok if it shows up.
Open Dreamweaver, worked a treat on ones I tried. This solution also works for Bridge CS5 not opening and crashing (Bridge has stopped working) under Windows 7 x64; even after Adobe looked at the issue and were clueless!
If you want any more info, let me know.

Sorry I can't be more help. This is a user to user forum, and I'm a designer rather than a technician. How about contacting Adobe Technical support?
http://www.adobe.com/support/contact/

Dreamweaver Fails To Load On Acer Laptop

I recently purchased an Acer 6920 laptop, everything runs
fine, including other CS3 applications, however Dreamweaver loads
to the point where the splash screen shows initialising files and
then...nothing. I contacted Acer software support and was told
there is a conflict with the 3rd party PSD app shipped with the
laptop as part of what they call empowering technology :) I was
given the following fix, which has solved the problem:
First restart in safe mode - Click on start, type msconfig
into the search box, hit enter. Once open click on the boot tab,
under boot options select safe boot and then minimal click OK and
then restart
Once rebooted navigate to the following folders and in each
case rename the PSDProtect.dll file to something else such as
noPSDProtect.dll:
C:\Program Files\Acer\Empowering Technology\eDataSecurity\x86
C:\Program Files\Acer\Empowering Technology\eDataSecurity\x64
Restart your computer and all should then be fine loading
Dreamweaver, PSD will still work except you will lose drag and drop
functionality. Personally I don't use PSD but simply had to get
Dreamweaver working
Hope this helps someone
Dave

Very thoughtful of you to post Dave, thanks.
"DavePace" <[email protected]> wrote in
message
news:g35f04$fou$[email protected]..
>I recently purchased an Acer 6920 laptop, everything runs
fine, including
>other
> CS3 applications, however Dreamweaver loads to the point
where the splash
> screen shows initialising files and then...nothing. I
contacted Acer
> software
> support and was told there is a conflict with the 3rd
party PSD app
> shipped
> with the laptop as part of what they call empowering
technology :) I was
> given
> the following fix, which has solved the problem:
>
> First restart in safe mode - Click on start, type
msconfig into the search
> box, hit enter. Once open click on the boot tab, under
boot options
> select
> safe boot and then minimal click OK and then restart
>
> Once rebboted navigate to the following folders and in
each case rename
> the
> PSDProtect.dll file to something else such as
noPSDProtect.dll:
>
> C:\Program Files\Acer\Empowering
Technology\eDataSecurity\x86
> C:\Program Files\Acer\Empowering
Technology\eDataSecurity\x64
>
> Restart your computer and all should then be fine
loading Dreamweaver, PSD
> will still work except you will lose drag and drop
functionality.
> Personally I
> don't use PSD but simply had to get Dreamweaver working
>
> Hope this helps someone
>
> Dave
>

Dreamweaver Business Catalyst SFTP Fail

I really think business catalyst has some potential, but I have yet to be able to connect to it using dreamweaver cc or cs6.
Windows 7 x64
Kaspersky Internet Security (I have tried with it disabled)
When I try to connect to the servers using sftp I get the following error: (it doesn't even give me a log file)
I have no problems logging in with FileZilla.
Both BC support and Dreamweaver support have been completely utterly useless.
I'm praying someone on here has come across this with a resolution. (seems to be a common problem - I have yet to fix)

I am assuming you are correctly using these connection details:
SFTP account details
Host name - mydomain.com
Protocol - SFTP / SSH File Transfer Protocol
Port - 22
User name - mydomain.com/[email protected]
Password - Your admin login password
Notice the way username is inserted here.
You might also want to check your FTP log if it has anything to suggest what is wrong. To get the log file do this:
Window >> Results >> FTP Log
See this picture:

Css copy paste problem in Dreamweaver CS4

Having a problem in CS4 when I want to copy and paste things
in my stylesheet.
Whenever I do ctrl +c to select a something the whole
stylesheet gets selected. And that is not what I want.
Even is I want to copy something from an other css into the
css I am working on it won't do the job.
Anyone having the same problem and found a solution?

I observe this problem too on my Vista x64 machine with CS4
using dual monitors and split code/design views, and have found
others who have this problem by searching Google.
Description of problem: Roughly 50% of the time, when
switching between files (regardless of type) and trying to select a
block of code with my mouse (dragging over some code with the left
button), it appears to work normally (the intended code is
highlighted). However, when then attempting to CTRL-C (cut) or
paste, the selected code instantly changes to a much larger block
of code (usually selecting a specific div block or something). The
cut or pasted code is then the larger (unintended) block of code.
Once the code view selection works for a particular file
(either it worked from the start or I poked at it long enough to
work), it seems to remain working until switching to another file
and then returning.
Also, Dreamweaver CS3 didn't have this problem, so it's CS4
only.
This is a workflow nuisance much like a word-processor
deciding to insert a % character randomly every 10 seconds while
typing.
I found a Google groups thread
here
in which a poster writes that deleting the Dreamweaver
configuration file fixes this temporarily (the problem eventually
shows up again, and you lose all your customizations by doing
this). The posters in this thread also describe the same problem
with other hardware configurations.
My current workaround is to type return then backspace when
dropping in to the code-view of another file--kind of a pain, but
at least predictable. I also tried avoided the issue by: (a)
selecting something in the design view and then selecting something
in the code view, and/or (b) telling Dreamweaver to show the
"element view" (right click in design view, element view, Full),
but this latter action may be superfluous.
I'd be very interested if someone were to post a simple fix
for this problem.
thanks!
JP
PS. David: I've learned a lot from your books. Thanks for
writing them!

Installation Issue with Dreamweaver. (Error 1935, Exit code 7)

Hey there,
So I've been googling my little heart away for 8 hours now and I haven't found any results.
I'm installing on a x64 Win 7 system. From my googling I found out that the relevant part of the installation log is:
Feature: Microsoft_VC80_ATL_x86_
Action 19:23:42: PublishProduct. Publishing product information
[ 808] Tue May 15 19:23:43 2012 INFO
Error 1935.An error occurred during the installation of assembly component {97F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}. HRESULT: 0x800736CC.
Action ended 19:23:43: InstallFinalize. Return value 3.
Here is the in-installer error logs
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 19 error(s), 19 warning(s)
WARNING: OS requirements not met for {694213D7-1E0E-4C8F-B822-E2E3680C0FCE}
WARNING: OS requirements not met for {A1BC7068-C1BA-410F-8B9A-DB807C803DE2}
WARNING: OS requirements not met for {C79312BD-3E76-4474-A10C-1435D1856A4B}
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
ERROR: MsiConfigureProductEx failed with error: 1603
ERROR: The following payload errors were found during install:
ERROR: - Adobe Media Player: Install failed
ERROR: - SiteCatalyst NetAverages: Install failed
ERROR: - Microsoft_VC80_ATL_x86: Install failed
ERROR: - DeviceCentral_DeviceCentral3LP-en_US: Install failed
ERROR: - AdobeHelp: Install failed
ERROR: - Adobe ReviewPanel CS5: Install failed
ERROR: - CSXS Story Extension: Install failed
ERROR: - Adobe Linguistics CS5: Install failed
ERROR: - DeviceCentral: Failed due to Language Pack installation failure
ERROR: - Adobe CSXS Extensions CS5: Install failed
ERROR: - Creative Suite 5 Design Premium: Install failed
ERROR: - HIL Help Search: Install failed
ERROR: - Adobe Dreamweaver CS5: Failed due to Language Pack installation failure
ERROR: - Adobe Dreamweaver CS5_AdobeDreamweaver11en_USLanguagePack: Install failed
ERROR: - Adobe Extension Manager CS5: Install failed
ERROR: - Adobe ExtendScript Toolkit CS5: Install failed
ERROR: - Adobe AIR: Install failed
I've already tried installing it while in safe mode, repairing my .NET Framework, and sfc / scannow.
Anybody have any ideas?
Edit: added in-install log

Hi Vikas... can you help me with this error... i was trying to install dreamweaver w no success..
ERROR: Failed to install Microsoft Visual C++ 2010 Redistributable Package (x86). Please try installing it by double clicking on the executable at "C:\Archivos de programa\Adobe Dreamweaver CS6\Adobe Dreamweaver CS6\payloads\Microsoft VC 2010 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2010 Redistributable Package (x86) from Microsoft website - www.microsoft.com
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Microsoft Visual C++ 2010 Redistributable Package (x86): Install failed

Dreamweaver x64

Similar Messages

Maybe you are looking for