DreamweaverCC won't start under OS X 10.10.1 French

When I double Click on Adobe Dreamweaver CC 2014.1 it show the icon like it start, but it won't.
Any help ?

I did :
- uninstalled DreamweaverCC
- deleted all the DreamweaverCC Users folder
- reinstalled DreamweaverCC
It works know.
Thanks a lot for your help :-)
Sincerely,
Bertrand

Similar Messages

Tomcat 5 service won't start under w2k

Has anyone else had trouble getting the Tomcat 5 service to start under Windows 2000 or Windows XP? I have tried installing the service using the installer .exe and also manually by downloading the zip file and using the service.bat file in the bin directory. I can install the service, but when I attempt to start it I receive the following message:
Could not start the Apache Tomcat service on Local Computer.
Error 1053: The service did not respond to the start or control request in a timely fashion.
I have set the JAVA_HOME and CATALINA_HOME environment variables properly. I can start and stop Tomcat just fine by using startup.bat and shutdown.bat. If I can start Tomcat by using startup.bat, what is stopping me from starting it as a service? I must be missing some configuration setting or something...
I am having the same problem on 3 different computers, 2 w2k machines and 1 XP Pro machine. I have tried both Tomcat 5.0.18 and 5.0.19, same result on both.
Any help would be appreciated!

run regedit in command line,add the key:
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Runtime Environment]
"CurrentVersion"="1.4"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Runtime Environment\1.4]
"JavaHome"="C:\\Program Files\\Java\\j2re1.4.1_01"
"MicroVersion"="1"
"RuntimeLib"="C:\\Program Files\\Java\\j2re1.4.1_01\\bin\\client\\jvm.dll"

OS 9 won't start under Tiger

Hi,
My Classic environment will no longer start under Tiger, although I can boot from it independently. I suspect my recent maintenance activities may be to blame. I have three internal drives, all with Tiger and one also with OS 9.2. Recently the boot disc showed signs of failing: I caught it in time, imaged the disc and replaced it. After a bit of fiddling with the remade disc I could start from it. Unfortunately I can't recall whether OS9 has ever worked since, but I think it has. I don't use it often.
I have tried booting under Tiger with extensions off and also moving and replacing the Finder so that it is 'blessed', both without success. I thought about reinstalling but I get a message saying I can't install over a newer OS.
All help gratefully received!
Andy
G4 Digital Audio 733MHz Mac OS X (10.4.9) ATA 120GB, ATA 80GB, SCSI 17GB, Airport

Problem solved: I reinstalled the printer drivers as they had also been affected by my maintenance and Classic now fires up perfectly. I can't begin to imagine why this should have had any effect, but there we are

Classic won't start under Tiger

When I try to start classic, it hangs as soon as the startup "Smiley Mac" screen appears"
My computer will boot from OS9 system folder, but not start classic either from system preferences or automatically if I'm in Tiger.
I've fixed OS9 permissions from Disk Utility, turned off all extensions, rebuilt desktop, checked that there's only one OS9 on drive...what's next?
Thanks, mavens!

Ok...at this point, we know the system will boot to 9, but not startup 9 from inside of X - rather, it starts, then hangs after the splash screen. I'm back to extensions.
I know you said you had disabled them once; I come back to the same conclusion for a couple of reasons.
If it were a disk error, bad block, or corrupted (os9) system file, then it is most probable that booting the machine to 9 would also fail. Since that works, and we know extensions are the first thing that loads on power on...
Also, I did have this same problem when I first switched to X (about v10.0.4). But it's been so long since I resolved that issue, I cannot recall which one(s) I disabled. I am using the same HD and OS9 system folder I used then (moved the drive to this machine), and have not toyed with the extension settings since resolving the problem.
Rather than use the all/no extension option in the X Classic control pane, I would boot the machine to 9, run extension manager, and select the "all off" option. This does not rely on Xs ability to disable them on the fly, and will disable any extensions that load before extensions manager does (there are a few) and is permanent (until you turn them back on.)
Reboot to X, then try to run Classic.
If it works, then rerun extension manager and select "OS9.2 extensions only" which will not load any 3rd party extensions.

DSEE 6.0 won't start under Cluster 3.2u2

DS v6.0 originally native package install then install DS v6.3.1 with patch 125278-08, my mistake was that I describe below, then probe with DS v6.0 and I still have the same error.
pienso que el problema es con el agente de cluster y sus binarios
I think the problem is with the agent and its binary cluster
Solaris 10 x86
bash-3.00# hostname
solnodo1
bash-3.00# clrg status
=== Cluster Resource Groups ===
Group Name Node Name Suspended Status
ldap-rg solnodo1 No Offline
solnodo2 No Offline
bash-3.00# clrs status
=== Cluster Resources ===
Resource Name Node Name State Status Message
ldap-lh-rs solnodo1 Offline Offline - LogicalHostname offline.
solnodo2 Offline Offline - LogicalHostname offline.
ldap-hastp-rs solnodo1 Offline Offline
solnodo2 Offline Offline
ds--opt-iplanet-ds-63-instances-PCUS-LDAP solnodo1 Offline Offline - Successfully stopped Sun Java(TM) System Directory Server.
solnodo2 Offline Offline - Successfully stopped Sun Java(TM) System Directory Server.
bash-3.00# clrt lsi ist
SUNW.LogicalHostname:3
SUNW.SharedAddress:2
SUNW.HAStoragePlus:6
SUNW.ds6ldap
bash-3.00# df -h
Filesystem size used avail capacity Mounted on
/dev/dsk/c1t0d0s0 7.1G 5.4G 1.6G 77% /
/devices 0K 0K 0K 0% /devices
ctfs 0K 0K 0K 0% /system/contract
proc 0K 0K 0K 0% /proc
mnttab 0K 0K 0K 0% /etc/mnttab
swap 1.0G 1.2M 1.0G 1% /etc/svc/volatile
objfs 0K 0K 0K 0% /system/object
sharefs 0K 0K 0K 0% /etc/dfs/sharetab
/usr/lib/libc/libc_hwcap1.so.1
7.1G 5.4G 1.6G 77% /lib/libc.so.1
fd 0K 0K 0K 0% /dev/fd
swap 1.0G 44K 1.0G 1% /tmp
swap 1.0G 32K 1.0G 1% /var/run
/vol/dev/dsk/c0t0d0/sc_32u2_dvd
1013M 1013M 0K 100% /cdrom/sc_32u2_dvd
/dev/did/dsk/d2s5 486M 5.5M 432M 2% /global/.devices/node@1
/hgfs 16G 4.0M 16G 1% /hgfs
/dev/did/dsk/d8s5 486M 5.5M 432M 2% /global/.devices/node@2
bash-3.00# cd / /opt/SUNWdsee/ds6/bin/dsadm -V
[dsadm]
dsadm : 6.0 B2007.025.1834
[slapd 32-bit]
Sun Microsystems, Inc.
Sun-Java(tm)-System-Directory/6.0 B2007.025.1834 32-bit
ns-slapd : 6.0 B2007.025.1834
Slapd Library : 6.0 B2007.025.1834
Front-End Library : 6.0 B2007.025.1834
[slapd 64-bit]
Sun Microsystems, Inc.
Sun-Java(tm)-System-Directory/6.0 B2007.025.1834 64-bit
ns-slapd : 6.0 B2007.025.1834
Slapd Library : 6.0 B2007.025.1834
Front-End Library : 6.0 B2007.025.1834
bash-3.00# pkgingo fo -l SUNWldap. -directory-ha
PKGINST: SUNWldap-directory-ha
NAME: Sun Java(TM) System Directory Server Component for Cluster
CATEGORY: system
ARCH: i386
VERSION: 6.0,REV=2006.07.07
BASEDIR: /opt/SUNWdsee
VENDOR: Sun Microsystems, Inc.
DESC: Sun Java(TM) System Directory Server Component for Cluster
PSTAMP: carabosse20060707032224
INSTDATE: Mar 25 2010 07:27
HOTLINE: Please contact your local service provider
STATUS: completely installed
FILES: 13 installed pathnames
3 shared pathnames
4 directories
8 executables
998 blocks used (approx)
bash-3.00# clrs g online ldap-rg
bash-3.00# clrs status
=== Cluster Resources ===
Resource Name Node Name State Status Message
ldap-lh-rs solnodo1 Online Online - LogicalHostname online.
solnodo2 Offline Offline - LogicalHostname offline.
ldap-hastp-rs solnodo1 Online Online
solnodo2 Offline Offline
**ds--opt-iplanet-ds-63-instances-PCUS-LDAP solnodo1 Starting Online - Completed successfully*.*
solnodo2 Offline Offline - Successfully stopped Sun Java(TM) System Directory Server.
bash-3.00# tail -f /var/adm/messages
Mar 25 09:21:30 solnodo2 Cluster.RGM.global.rgmd: [ID 515159 daemon.notice] method <hafoip_monitor_stop> completed successfully for resource <ldap-lh-rs>, resource group <ldap-rg>, node <solnodo2>, time used: 0% of timeout <300 seconds>
Mar 25 09:21:30 solnodo2 Cluster.RGM.global.rgmd: [ID 224900 daemon.notice] launching method <hafoip_stop> for resource <ldap-lh-rs>, resource group <ldap-rg>, node <solnodo2>, timeout <300> seconds
Mar 25 09:21:30 solnodo2 Cluster.RGM.global.rgmd: [ID 944595 daemon.notice] 39 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/rgm/rt/hafoip/hafoip_stop>:tag=<ldap-rg.ldap-lh-rs.1>: Calling security_clnt_connect(..., host=<solnodo2>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Mar 25 09:21:30 solnodo2 ip: [ID 678092 kern.notice] TCP_IOC_ABORT_CONN: local = 010.010.010.050:0, remote = 000.000.000.000:0, start = -2, end = 6
Mar 25 09:21:30 solnodo2 ip: [ID 302654 kern.notice] TCP_IOC_ABORT_CONN: aborted 0 connection
Mar 25 09:21:30 solnodo2 Cluster.RGM.global.rgmd: [ID 515159 daemon.notice] method <hafoip_stop> completed successfully for resource <ldap-lh-rs>, resource group <ldap-rg>, node <solnodo2>, time used: 0% of timeout <300 seconds>
Mar 25 09:21:30 solnodo2 Cluster.RGM.global.rgmd: [ID 224900 daemon.notice] launching method <hastorageplus_postnet_stop> for resource <ldap-hastp-rs>, resource group <ldap-rg>, node <solnodo2>, timeout <1800> seconds
Mar 25 09:21:30 solnodo2 Cluster.RGM.global.rgmd: [ID 944595 daemon.notice] 39 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/rgm/rt/hastorageplus/hastorageplus_postnet_stop>:tag=<ldap-rg.ldap-hastp-rs.11>: Calling security_clnt_connect(..., host=<solnodo2>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Mar 25 09:21:30 solnodo2 Cluster.RGM.global.rgmd: [ID 515159 daemon.notice] method <hastorageplus_postnet_stop> completed successfully for resource <ldap-hastp-rs>, resource group <ldap-rg>, node <solnodo2>, time used: 0% of timeout <1800 seconds>
Mar 25 09:21:30 solnodo2 Cluster.Framework: [ID 801593 daemon.notice] stdout: no longer primary for ldap-ds
somebody help me
Edited by: bootbk on Mar 26, 2010 7:26 AM

DS v6.0 originally native package install then install DS v6.3.1 with patch 125278-08, my mistake was that I describe below, then probe with DS v6.0 and I still have the same error.
pienso que el problema es con el agente de cluster y sus binarios
I think the problem is with the agent and its binary cluster
Solaris 10 x86
bash-3.00# hostname
solnodo1
bash-3.00# clrg status
=== Cluster Resource Groups ===
Group Name Node Name Suspended Status
ldap-rg solnodo1 No Offline
solnodo2 No Offline
bash-3.00# clrs status
=== Cluster Resources ===
Resource Name Node Name State Status Message
ldap-lh-rs solnodo1 Offline Offline - LogicalHostname offline.
solnodo2 Offline Offline - LogicalHostname offline.
ldap-hastp-rs solnodo1 Offline Offline
solnodo2 Offline Offline
ds--opt-iplanet-ds-63-instances-PCUS-LDAP solnodo1 Offline Offline - Successfully stopped Sun Java(TM) System Directory Server.
solnodo2 Offline Offline - Successfully stopped Sun Java(TM) System Directory Server.
bash-3.00# clrt lsi ist
SUNW.LogicalHostname:3
SUNW.SharedAddress:2
SUNW.HAStoragePlus:6
SUNW.ds6ldap
bash-3.00# df -h
Filesystem size used avail capacity Mounted on
/dev/dsk/c1t0d0s0 7.1G 5.4G 1.6G 77% /
/devices 0K 0K 0K 0% /devices
ctfs 0K 0K 0K 0% /system/contract
proc 0K 0K 0K 0% /proc
mnttab 0K 0K 0K 0% /etc/mnttab
swap 1.0G 1.2M 1.0G 1% /etc/svc/volatile
objfs 0K 0K 0K 0% /system/object
sharefs 0K 0K 0K 0% /etc/dfs/sharetab
/usr/lib/libc/libc_hwcap1.so.1
7.1G 5.4G 1.6G 77% /lib/libc.so.1
fd 0K 0K 0K 0% /dev/fd
swap 1.0G 44K 1.0G 1% /tmp
swap 1.0G 32K 1.0G 1% /var/run
/vol/dev/dsk/c0t0d0/sc_32u2_dvd
1013M 1013M 0K 100% /cdrom/sc_32u2_dvd
/dev/did/dsk/d2s5 486M 5.5M 432M 2% /global/.devices/node@1
/hgfs 16G 4.0M 16G 1% /hgfs
/dev/did/dsk/d8s5 486M 5.5M 432M 2% /global/.devices/node@2
bash-3.00# cd / /opt/SUNWdsee/ds6/bin/dsadm -V
[dsadm]
dsadm : 6.0 B2007.025.1834
[slapd 32-bit]
Sun Microsystems, Inc.
Sun-Java(tm)-System-Directory/6.0 B2007.025.1834 32-bit
ns-slapd : 6.0 B2007.025.1834
Slapd Library : 6.0 B2007.025.1834
Front-End Library : 6.0 B2007.025.1834
[slapd 64-bit]
Sun Microsystems, Inc.
Sun-Java(tm)-System-Directory/6.0 B2007.025.1834 64-bit
ns-slapd : 6.0 B2007.025.1834
Slapd Library : 6.0 B2007.025.1834
Front-End Library : 6.0 B2007.025.1834
bash-3.00# pkgingo fo -l SUNWldap. -directory-ha
PKGINST: SUNWldap-directory-ha
NAME: Sun Java(TM) System Directory Server Component for Cluster
CATEGORY: system
ARCH: i386
VERSION: 6.0,REV=2006.07.07
BASEDIR: /opt/SUNWdsee
VENDOR: Sun Microsystems, Inc.
DESC: Sun Java(TM) System Directory Server Component for Cluster
PSTAMP: carabosse20060707032224
INSTDATE: Mar 25 2010 07:27
HOTLINE: Please contact your local service provider
STATUS: completely installed
FILES: 13 installed pathnames
3 shared pathnames
4 directories
8 executables
998 blocks used (approx)
bash-3.00# clrs g online ldap-rg
bash-3.00# clrs status
=== Cluster Resources ===
Resource Name Node Name State Status Message
ldap-lh-rs solnodo1 Online Online - LogicalHostname online.
solnodo2 Offline Offline - LogicalHostname offline.
ldap-hastp-rs solnodo1 Online Online
solnodo2 Offline Offline
**ds--opt-iplanet-ds-63-instances-PCUS-LDAP solnodo1 Starting Online - Completed successfully*.*
solnodo2 Offline Offline - Successfully stopped Sun Java(TM) System Directory Server.
bash-3.00# tail -f /var/adm/messages
Mar 25 09:21:30 solnodo2 Cluster.RGM.global.rgmd: [ID 515159 daemon.notice] method <hafoip_monitor_stop> completed successfully for resource <ldap-lh-rs>, resource group <ldap-rg>, node <solnodo2>, time used: 0% of timeout <300 seconds>
Mar 25 09:21:30 solnodo2 Cluster.RGM.global.rgmd: [ID 224900 daemon.notice] launching method <hafoip_stop> for resource <ldap-lh-rs>, resource group <ldap-rg>, node <solnodo2>, timeout <300> seconds
Mar 25 09:21:30 solnodo2 Cluster.RGM.global.rgmd: [ID 944595 daemon.notice] 39 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/rgm/rt/hafoip/hafoip_stop>:tag=<ldap-rg.ldap-lh-rs.1>: Calling security_clnt_connect(..., host=<solnodo2>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Mar 25 09:21:30 solnodo2 ip: [ID 678092 kern.notice] TCP_IOC_ABORT_CONN: local = 010.010.010.050:0, remote = 000.000.000.000:0, start = -2, end = 6
Mar 25 09:21:30 solnodo2 ip: [ID 302654 kern.notice] TCP_IOC_ABORT_CONN: aborted 0 connection
Mar 25 09:21:30 solnodo2 Cluster.RGM.global.rgmd: [ID 515159 daemon.notice] method <hafoip_stop> completed successfully for resource <ldap-lh-rs>, resource group <ldap-rg>, node <solnodo2>, time used: 0% of timeout <300 seconds>
Mar 25 09:21:30 solnodo2 Cluster.RGM.global.rgmd: [ID 224900 daemon.notice] launching method <hastorageplus_postnet_stop> for resource <ldap-hastp-rs>, resource group <ldap-rg>, node <solnodo2>, timeout <1800> seconds
Mar 25 09:21:30 solnodo2 Cluster.RGM.global.rgmd: [ID 944595 daemon.notice] 39 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/rgm/rt/hastorageplus/hastorageplus_postnet_stop>:tag=<ldap-rg.ldap-hastp-rs.11>: Calling security_clnt_connect(..., host=<solnodo2>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Mar 25 09:21:30 solnodo2 Cluster.RGM.global.rgmd: [ID 515159 daemon.notice] method <hastorageplus_postnet_stop> completed successfully for resource <ldap-hastp-rs>, resource group <ldap-rg>, node <solnodo2>, time used: 0% of timeout <1800 seconds>
Mar 25 09:21:30 solnodo2 Cluster.Framework: [ID 801593 daemon.notice] stdout: no longer primary for ldap-ds
somebody help me
Edited by: bootbk on Mar 26, 2010 7:26 AM

Director won't start under Vista

I had installed the trial version of Director this computer
(AMD laptop) about a year ago, and it worked fine, but I didn't
have much of a use for it at that point, so I uninstalled it.
Now I've installed it on the same laptop except running
Vista. When I double-click the Director application, the hard drive
looks like it's working, but the application never begins. I've
installed all of the updates, and have rebooted several times.
Is there a compatibility problem between Director and Vista?
Thanks for any help you can pass along!

This technote for Encore also fixes this issue with Director:
http://www.adobe.com/cfusion/knowledgebase/index.cfm?event=view&id=KC.333696&extid=333696& dialogID=3251142&iterationID=1&sessionID=483094da429d72452d5b&stateID=0+0+3249974&mode=sim ple
Right click the Director app, and choose Properties. Go to
the Compatibility tab, and click the box for "Run with
administrator privileges."
That fixes it. Just FYI, in case anyone else has the same
problem. :-)

Powerbook G4 10.4.11 won't start from hard drive . Tried repair, " The underlying task reported failure on exit (-9972).Invalid sibling link,invalid B tree header, invalid map node,invalid record type,the volume needs to be repaired.

Powerbook G4 10.4.11 won't start from hard drive . Tried repair, " Invalid sibling link,invalid B tree header, invalid map node,invalid record type,the volume needs to be repaired.Powerbook G4 10.4.11 won't start from hard drive . Tried repair, " The underlying task reported failure on exit (-9972).Invalid sibling link,invalid B tree header, invalid map node,invalid record type,the volume needs to be repaired.
The underlying task reported failure on exit (-9972).

kauribill wrote:
" The underlying task reported failure on exit (-9972).Invalid sibling link,invalid B tree header, invalid map node,invalid record type,the volume needs to be repaired.
The underlying task reported failure on exit (-9972).
This is a directory issue that Disk Utility cannot fix. Although it manifests itself as a software issue sometimes it may be hardware based. See DiskUtility reports "Underlying task reported failure" when repairing avolume http://support.apple.com/kb/TS1901?viewlocale=en_US". You can try using a utility like TechTool Pro, Drive Genius or Disk Warrior to repair and replace the directory. Another option would be to use the Archive and Install feature to reinstall. If the problem returns after correction you may have a failing or failed HDD.
cornelius

PS CS5 under Lion--won't start?

Just installed PSCS5 Ver 12.0 x64 under Mac OS X Ver 10.7.2.
Photoshop won't start, but hangs at "Reading brushes..."
Have tried opening it from Bridge and opening directly from the Dock (without Bridge).
Any suggestions or pointers?

Have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift pressed while starting Photoshop, 3rd party plug-ins deactivation, system maintenance, font validation, etc.)?

My iphone 3g has been restored but it went under safety mode and now it won't start, what do I do?

My iphone 3g has been restored but it went under safety mode and now it won't start, what do I do?
It just has a picture of the usb cord needs to hook up to i tunes but itunes says the problem about being unable to start it under safety mode

It's in recovery mode. You need to plug it into your computer running iTunes and restore it.

Mac won't start (Kernel Panics)

Hello,
My mac won't start up. It turns on, gets as far as the spinning circle and apple logo then a dark screen comes down with a Kernel Panic message. This occurred roughly three months ago and I ended up taking the mac into the regent street store where it was fixed under apple care warranty. My care has now run out, and the 90 day repair warranty has expired but the problem is back so obviously hasn't been fixed properly. Is there anything that can be done about this?
Every time I boot up the computer the message appears, I have tried rebooting with the safe option as well as re installing OSX from the original disks. The install completes successfully but upon restart it pops up with the original kernel panic message.
Luckily I have everything backed up so am prepared to try anything to get it running.
Thanks.

Let us know, but since you obviously have another machine, have you tried Target Disk Mode and then Disk Utility?
use TDM to access Disk Utility.
1. Click the First Aid tab.
2. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
3. Select your Mac OS X volume.
4. Click Repair. Disk Utility checks and repairs the disk.
Please post back,

Firefox Won't Start

Firefox was running fine on my Win7 Pro PC.
My PC started running slow, so I cycled the power. Afterward, Firefox started reporting, "can't log into server". Other browsers worked fine. So I tried a few things that didn't work, and I eventually uninstalled, then reinstalled Firefox.
First time I tried running Firefox after reinstalling, my PC bluescreened.
Now, Firefox simply won't start. I get the little spinning wheel for a few seconds, then nothing. A Firefox process shows up in task manager, but just goes away. Same thing happens when I try starting Firefox in Safe Mode.
A recent post with this title has a link to: http://kb.mozillazine.org/Browser_will_not_start_up , but the link gives me a "URL could not be retrieved" error.
I have also tried looking at the crash reports, but there is no "Submitted" folder under the Firefox folder.
Help? Thanks!

Potentially important note. MalwareBytes was already installed - it looks like the problem with Firefox appears to have started after I downloaded an update to MalwareBytes.
It would be interesting to know if anyone else has experienced this problem.

IPod Touch not recognized in Windows & iTunes won't start unknown error -50

I have been trying to fix a connectivity issue with my iPod touch for almost 6 hours now. I've read all over the iPod Touch forums and none of the solutions worked for me. I've installed and uninstalled iTunes multiple times and nothing seems to work.
Also, earlier this evening iTunes was working but it wouldn't recognize my iPod touch although it would charge. Now that iTunes won't start I'm also having problems with charging my iPod and at no time, was my iPod ever recognized in 'My Computer'.
Someone please help! I'm at my wits end without being able to use and update my iPod. All help/insight/suggestions are appreciated and thanks in advance!

AppleNEve wrote:
I double checked to make sure that the cable is not faulty and it's working perfectly.
how did you test that ?
anyhoo, you might want to give this a shot:
+Hi, All,+
+It works now, It suddenly stopped detecting due to unknown reasons, but try these steps.+
+Restart the device without connecting to your pc and+
+Connect to pc and restart again, I did this 2 times and it was recognized and its working fine.+
+Best of luck.+
here's the original thread: http://en.kioskea.net/forum/affich-17997-ipod-not-detected
if still no joy, it could be that your Touch is a goner. if it is still under warranty, you should plan a trip to the nearest Apple store.
JGG

Tiger won't start up, no volume to mount to?

Hi everyone,
I was doing some permissions repair and disk cleanup, when my power went out. Now Tiger won't start up! I get a full-screen shell with the following text:
disk0s3: I/O error.
disk0s3: I/O error.
/etc/master.password: Input/output error
disk0s3: I/O error.
-sh: /etc/profile: Input/output error
-sh-2.05b#
If I leave the Mac on, the fans start spinning up slowly and keep building to a roar. I've left it on for about 1 minute, then shut it down.
Starting up by holding the Command key down after the startup ding gets me a screen with a folder icon (?), which proceeds to turn into a smiley face and then the bootup sequence starts. It then goes back to the full-screen shell.
I put in my Tiger (10.4) install disk, and the Disk Utility shows the Hard Drive, but the Macintosh HD volume is greyed out and won't / can't mount, be verified, or repaired.
Trying to install so that I can archive / install yields no HDs that I can install to. Luckily I keep my PC around for just such an occurance
So the question is, what is going on here? Thanks in advance,
-Gary

You are going to have to reformat the drive. If there is a chance of data recovery it would be best if you stop using the drive altogether. Find another Mac with Firewire. Connect the two by Firewire cable. Boot the "bad" computer into Target Disk Mode, then boot the "good" computer normally. The "bad" computer's disk drive should appear on the other computer's Desktop. If the drive is still accessible, then you may be able to recover your data.
When you reformat the drive use the following procedure:
1. Boot from your Tiger DVD. After the installer loads select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.

HP OfficeJet J6410 won't install under Windows 8 & Windows 8.1

Recently I made a posting about installing the HP OfficeJet J6410 printer on my daughter's new HP laptop.
Please, before answering my question, I would like to point out to two earlier postings from me.
1. The first posting.
Around april this year (2014) I bought a new laptop for myself (a HP 15 Notebook PC, d081ed). It had Windows 8.1 pre-installed on it. At first I had problems installing the HP OfficeJet J6410 printer. I received a very usefull reply by which I was able to solve the problem.
Read more about this posting here: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Officet-J6410-won-t-install-under-Wind...
2. The second posting.
Almost two weeks ago a bought a second HP laptop (HP Pavilion TouchSmart 11-e000ed) voor my daughter. This laptop had Windows 8 pre-installed on it. I experienced the same problem with the printer and made a posting. Unfortunatelly that didn't resolve the problem. I received no further reactions. The problem is still unsolved.
Read more about this posting here: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/HP-OfficeJet-J6410-won-t-install-under...
A. What have I done afterwards?
Afterwards the previous above I first made sure I had all the updates for Windows 8 installed. I've read that in the case of the laptop of my daughter I could upgrade for free to Windows 8.1. So I did that too.
B. Why a second posting?
Since I upgraded to Windows 8.1. I realized my second posting wasn't quite accurate anymore. I realized it could lead to confusion since I now don't have Windows 8 installed on it anymore.
Now here's the strange part.
B.1.
On my own laptop (d081ed, HP 15 Notebook PC) I have the same operating system (Windows 8.1. ) as I now have on the laptop for my daughter (11-e000ed, HP Pavillion Touchsmart)
B.2.
After upgrading I tried the same steps, as described in my first posting, on the laptop for my daughter.
Strangely enough, and although we now both have a HP laptop with exactly the same operating system on it, I can not get the printer installed.
What can be wrong? I tried updating, the scrubber, the packages to solve the C++ redistributable packages... nohting works! And worse!! It seems I somehow made the problem worse...
Why do I think that, and are there things or error-messages that are different than the one I experienced before (with my own laptop, see point 1 above at the beginning of this posting).
B.2.1.
The first thing that is different:
If I want to install the printer, and after it extracted files, checked the system and prepares it for installation, I receive the message:
C:\users\<username of my daughter.\AppData\Local\Temp\7zS0FF0\Setup\de..
This is different than the message (Program: C\Users\IRN\AppData\Local\Temp\7zS28Db\Setup.exe) I experienced with my own laptop (the d081ed).
Note the difference between:
..Temp\7zS0FF0\Setup\de.. (<-- that is the message I get on the laptop of my daughter)
and
..Temp\7zS28Db\Setup.exe (<-- that is the message I had on my own laptop)
B.2.2.
The second thing that is different:
At some point I installed, after upgrading to Windows 8.1, the SP 40669 package. I can't remember having done that on my own laptop.
B.2.3.
On my own laptop I installed the C+++ packages for 2005, 2008 and 2010.
On the one for my daughter I only installed the C+++ package for 2010 (KB2562063, version 10.0.30319 and 10.0.40219, but I don't think that is the problem really, correct my if I'm wrong).
B.2.4.
Before I upgraded to Windows 8.1. I got an error message at rebooting the system (in Dutch
explorer.exe - Toepassingsfout
De instructie op 0x5d2c3e01 verwijst naar geheugen op 0x00000000. Een lees- of schrijfbewerking op het geheugen is mislukt: read.
Klik op OK als u het programma wilt beëindigen.
And after that the message doesn't wait for your click on OK. It just flashes away very quickly. Since I got that message a couple of times, I did manage to capture it with the camcorder on my mobile phone. In that way I was able to describe you the message as exactly as here above.
I sometimes get the message again, and then not. So it's not consistent. It seems to me the problem there is with explorer.exe and not with the printerproblem, but I'm not sure. Couple of days later, there were new updates for Windows 8.1, which I installed, and the error-message didn't show up again the last few days.
Last request.
I would really appreciate some help with this. The reason I like the printer installed is because of the HP Solution Center. I'm sure my daughter would use it for scanning documents needed for her study and printing activities.
I installed the basic printer for the time being, but only as I temporarily work-around, so she can - at least - print all of her study materials. Scanning, on the other hand, is some differtent then, but that is a known problem with the basic printer driver.
I truly don't understand this problem. We both have an HP laptop, we both have the same operating system now (Windows 8.1) and stil .. on my laptop I managed to install the printer, and on hers not.
Please help me.
(p.s. I do have a HP support Pack for both laptops, and if one thinks that this problem is too complex and would redirect me to HP support ... no offense taken, from my side. But, I really would like to try to solve problem myself at first and would really appreciate your help with it. )

Hello RNRMusicMan,
Glad you're willing to help me out. So Sorry I couldn't send a message earlier. I had a few appointments the last few days and afterwards I had to little time to spend enought time to try to solve te problem.
But o.k, let's continue.
I've followed the steps you mentioned as a second option. I'll describe what I've done.
First I tried the Hp printer install wizzard
No succes
Same error occured …\setup\de.. (at the second fase of the installation program of the printersoftware)
Restarted the system
I used the Scrubber
L4
Error: uninstaller didn't work. Clicked ok
Restart
At restart I got the same error about something with the memory. (In dutch; 'De instructie op 0x5d2c3e01 verwijst naar geheugen op 0x00000000. Een lees- of schrijfbewerking op het geheugen is mislukt: read.' and please note that 0x5d2c3e01 was this with different numbers etc, but I guess that's just the adress in the memory where the program wants to read/write to)
I continued with cleanboot
Msconfig – services – hide all microsoft services – disable
Startup – system configuration – open task manager
On startup tab in task manager – I disabled each startup item
Closed taskmanager
Startup – system configuration – checked ok box
Restarted
Tried to install again with the OI_AIO_J6400_Full_Win_WW_140_4.exe software I downloaded from the hp website
At ‘systeem wordt voorbereid op installatie’ I got the same error again: ‘C:\Users\Simone\AppData\Local-\Temp\7zS46SD\Setup\de..
After this I followed the steps as described to start up again normally (that is: msconfig, enabling the services again, etc.) and that step went o.k and as aspected, so no problems there.
After that I restarted the system again. I didn't get the message about the problem with the memory again. So I guess that must have been due to the error in the scrubber program.
I really don't understand this. Me and my daughter both have a hp, both the same OS (windows 8.1), and on my laptop I got the printer running and hers not. What can it be? I'm guessing that there most have been something that went wrong then with either the installation with one of the windows 8 or windows 8.a upgrades, or with the upgrading from windows 8 to windows 8.1. Or is that to far fetched? But that just a question I have, trying to understand what went wrong or what could be the cause of this.
So what now? It didn't work.
Update (29-9-14):
Since all the suggested solutions didn't work out I decided to start all over.
One of the reasons I decided to do so, was the following:
I've got an external DVD writer (Samsung, Slim External, model SE-8084D/TSWS) that I needed to use for installation of the HP J6410 CD that came with the printer, since the laptop of my daughter doesn't have a built-in DVD player.
Now here the strange thing! When I use it on my own laptop, it starts the software on the the HP J6410 DVD flawlessly. No problems there! But, when I connect it to the laptop of my daughter, it sees the CD and I can explore the files on it. But, when I try to start HPSetup.exe on it it does ... nothing!! Now that's very stange! Me and my daughter both have a HP laptop, with the same OS. Still it functions normally on my laptop, and on for the one for my daughter it does nothing. Same with the software that you can download from the HP site. It runs on my computer, but gives errors on the one for my daugther. So I guess that was a good reason to decide to start all over again from scratch
This is what I've done so far.
- I made a (full) factory recovery.
- I've installed all the updates for Windows 8.
- After that I upgraded to Windows 8.1 again and installed all of the updates for it as well.
- I removed the antivirus program (Norton Antivirus)
- After that is done I tried to install the printer again.
No success!
But.. I'm convinced I've found out where the problem might lay.
My daughter had c++ 2012 redistributable installed (version 11.0.50727).
My other laptop doesn't. An even older hp laptop (with Windows Vista on it) does neither. On those laptops the printer software ran.
On the new laptop for my daughter it doesn't.
So.. I'm suspecting the problem does not lay in the printer software but in the c++ 2012 redistributable package.
Another difference is that my own laptop had an Intel processor. The one for my daughter has an AMD.
So I am convinced the problem must lay in the C++ 2012 package (maybe combined with the AMD processor? I don't know) and NOT the printer software.
Anyone got any ideas on what to do next?
If so, I thankfully await your answer.

2nd Gen iPad Mini stopped working yesterday. Won't startup under and configuration and is not recognized by my iMac.

2nd Gen iPad Mini stopped working yesterday. Won't startup under and configuration and is not recognized by my iMac. I believe it upgraded itself to iOS 8 (????)

Hey Kenneth,
So it sounds as if your iPad is not responding at all when you try to turn it on, is that correct? If so, I would suggest that you troubleshoot using the steps in this article -
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
If you get it to start up and it is still not recognized by iTunes on your Mac, use the steps in this article to troubleshoot that issue -
If you don't see your connected device in iTunes for Mac - Apple Support
Thanks for using Apple Support Communities.
Happy computing,
Brett L

DreamweaverCC won't start under OS X 10.10.1 French

Similar Messages

Maybe you are looking for