Dreamwever suddenly will not start.

It has been working fine for months. Suddenly it crashes on start up.
Microsoft Visual C++ Runtime Library
Runtime Error!
The application has requested the Runtime to terminate it in an unusual way. Please contact the applications support team for more
information.
The error message comes up immediatiately (with the dreamweaver splash screen)
My other CS4 products come up fine (Flash, Fireworks...)
I searched the knowledge base and tried a few things to no avail.
    Deleted the temp config files,
    Uninstalled and re-installed.
    I even reinstalled the Microsoft VC++ runtimes.
Is there an startup/error log somewhere?
Where else can files be hiding besides DocumentsAndSettings/user/Application Data/Adobe/Dreamweaver CS4
Is there a way to get a celan uninstall?
I need to get this working ASAP to update our site.
Operating System: Windows XP Professional

Hi
I also have a prob with dreamweaver that crashes ...
I try to reinistall it
I aslo tryed to rename de configuration folder (Application data > Adobe > Dreamweaver CS4)
But still have an error message :
Runtime error !
Program : ...rogram Files\Adobe\Adobe Dreamweaver CS4\Dreamweaver.exe
The application has requested the Runtime to terminate it in an unusual way.
Please contact etc ...
Thx in advance for your return.

Similar Messages

For some reason my iPhone 4s suddenly will not "start sync" when I attach it to my macbook pro. It has worked fine until now. help!

I have been using my iPhone 4s for a while and had no problem syncing it to my macbook pro with Lion. Suddently today it gives me a message that sync does not start. What can I do to fix this?

Oops...my phone is running 6.0.1

My MP960 printer printed one page today, and suddenly quit. It will not start up again.

My MP960 printer printed one page today, and suddenly quit. It will not start up again. I'm a retired master electrician and I checked the power output and the power cord to the machine and everything is OK. I looked for a fuse location, but was not able to find any. Can anyone help me get my wonderful printer starter again? Thank you.

I have had the same problem with my MX860... I am very sad... I just bought new set of Ink for it & I went to open the top and noticed that the print head would not move into position... then I closed the lid and noticed that ONLY THE YELLOW :ALARM: light was on... It will not turn ON and the Yellow light only goes out when I unplug the unit. I tried the UNPLUG to reset and nothing happened when I plugged it back in and pushed the Power button on. I have it on a HUGE SURGE PROTECTOR And we have not had a storm in Weeks! My Laptop & Phone is plugged into the same surge/power back up.. besides, I know it's getting power or the Yellow ALARM LIGHT would not be on... Anyone have any IDEAS? The HELP staff is off for the WEEK END now..

Askcom has taken over as my browser firefox will not start, how do I get rid of askcom

firefox will not start. When I try to open firefox my computer displays askcom every time. I would like to get rid of askcom, I do not know how it got in my computer. I have tried to remove it in Win 7 programs and features but it will not go away.
My O/S is Win 7 Home addition.

''how do I get rid of ask.com''
See
:All of a sudden Ask.com showed up today as my default rather than Google. How do I get my Google back?
:'''https://support.mozilla.com/questions/868741'''
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>
a good starting place for problems with extensions and toolbars are
:http://kb.mozillazine.org/Problematic_extensions
:http://kb.mozillazine.org/Uninstalling_toolbars

Firefox will not start and profile manager will not start

This has happened on two accounts on my laptop. I am running windows 7, 64 bit and firefox 18.0. Firefox had been running on this machine for several years without incident, but suddenly when I try to start firefox, it will not start. The little wait icon spins for about a second then disappears without starting firefox. Other browser will start and run. I reboot and when I click on the icon to start firefox nothing happens. I tried to start the profile manager as seen in the knowledge base, but nothing starts either. I switched to another account on this computer and firefox started and ran for about a week, until today where it just stopped working. I have not tried to reinstall firefox as the message boards say this will not help. Any ideas?

Thanks for your help. I had tried starting Firefox in safe-mode before I posted this request, but it did not work. I tried to restore the system to an earlier version, but that made everything worse. Two accounts were unusable and one sort of worked, so I reloaded the operating system and now firefox works, for how long, I don't know. But thanks again for your suggestion.

My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data.

My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data. I'm not sure what has happened. It was working fine a few hours ago. I have tried resetting it, ive restarted my browser etc. I tried to erase all data from my Ipad but I can't do that because it needs to sign into my Apple ID and use the Internet!

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Mac crash; recovery will not start

Yesterday my Mac suddenly crashed into a screen with blue (and white) lines. It wouldn't respond to anything, so I powered it down and tried to boot again. However, it will not boot. It will show the Apple logo, request my password and after a while (with the Apple logo and the spinning wheel) it just shows a blank screen (grey), while the CPU fans are spinning like crazy.Sometimes will it not even get this far and stop doing anything before requesting the password. The guest mode has the same problem.
I basically tried everything to fix it; the recovery option will also show the blank grey screen but nothing else (even after 30 minutes); the internet recovery downloads fine and then pulls the same stunt, so even the recovery will not work. I've tried save mode, which cannot start up (Filevault is activated) and seems to end mid-way through. Sometimes the safe mode crashes immediately after the boot starts with a kernel panic (/sbin/launchd failed, errno 2); after resetting the NVRAM it won't panic.
I've checked the hardware (T startup option, full check), which al seems to be OK. SMART status from the harddrive looks OK (checked with DiskWarrior). Starting in single user mode sometimes gets me through the password request screen and allows me to check the hard drive (fsck -fy). This seems to change permissions, however, after a reboot or exit command, the problem persists and starting up in single user mode and performing the fsck -fy command again seems to fix some issues. When I enter the exit command in safe mode, it'll start up fine, but when the graphic user interface starts, it'll give me the grey screen again (so a blank screen, while the CPU fans are at full power).
Does anyone have any idea what I can do to fix this? Since even the recovery will not start (and neither will the internet recovery), I've got no clue what to do to fix this issue...

Your comment about the "blue and white lines" has me wondering. You say you have a fairly recent MacBook Pro, correct? If that is the case, you probably have a model which has both discrete and integrated GPUs. It is possible that your discrete GPU has failed, and whenever the OS is trying to switch to it is when your system just "hangs" (because the GPU has failed). It all works properly as long as it is on the integrated GPU, but when something causes it to switch it hits the bad GPU and locks.
I would suggest that you make an appointment at your nearest Apple Store to have the specialists at the Genius Bar take a look at it for you. If you are still under the 1 year warranty (or extended Apple Care if you purchased it) then any needed hardware repairs would be free, unless it is due to accidental damage such as a spill in the keyboard, etc.
If you don't have access to an Authorized Apple Service Center, and you do have access to another Mac, you could try making an external boot drive on the other Mac, then install the app "gfxCardStatus" on that MacOS instance (when booted from the external drive). While still booted from the external drive, use the gfxCardStatus app to force the Mac to only use the integrated GPU then shutdown and boot your "dead" Mac from that drive. If it boots and runs, now, try to change the external drive to force to use only the discrete GPU then see how your system boots. If your system, will fully boot using one or the other, then it seems that your problem is probably related to one of your GPUs. It could be a hardware failure, or it could be a corrupted driver. If your system won't boot from either GPU, then my guess about it being a GPU issue is probably wrong.

DW CS4 Will Not Start

I'm using DW CS4 and have been for many months without any problems - Version 10.0/Build 4117. All of a sudden it will not start, When I click on its icon I see the big green DW block and then a Microsoft notice saying Dreamweaver CS4 has stopped working - a problem..... and the only choice I have is to close the program. I've restarted my computer and tried again, with no success. The program sits in my Program Files/Adobe folder on my C: drive.
I badly need the program for the work I'm doing. I've added no new software to my computer lately - at least none that I know of.
Any suggestions?
Joe

Hi Thanks for this. I tried what you said the problem I have Win Vista and have installed dreamweaver cs4 Trial. I have Dreamweaver MX as well and have given up trying to use this on my vista machine. I can run CS4 on XP without any issues. Clearly this is a Vista use, but I can be alone with this problem can I?
When I try to run it It will not get past the splash screen, then reports the following.
I have tried turning off UAC and runing as Admin. Here is the error trail
Description: A problem caused this program to stop interacting with Windows.
Problem signature: Problem Event Name: AppHangB1 Application Name: Dreamweaver.exe Application Version: 10.0.0.4117 Application Timestamp: 48c874b4 Hang Signature: b4b6 Hang Type: 0 OS Version: 6.0.6001.2.1.0.768.3 Locale ID: 5129 Additional Hang Signature 1: 3ff7ef531c8f561f7432659a0b9534bf Additional Hang Signature 2: d4fd Additional Hang Signature 3: 044608c4cccbc38d42ab3134e57441d2 Additional Hang Signature 4: b4b6 Additional Hang Signature 5: 3ff7ef531c8f561f7432659a0b9534bf Additional Hang Signature 6: d4fd Additional Hang Signature 7: 044608c4cccbc38d42ab3134e57441d2
REALLY hope someone can help
Martin

System will not start

T60 will not start. While turning on and initiating system, it died suddenly. Even the battery light was not illuminated. Battery part# is FRU P/N 42T4504. Should the system still start with the AC adapter, even if battery has died? Are others having problems with this battery?

I had a similar problem, it ended up being much less of an issue than I originally thought.
THis was my problem, maybe its similar to yours.
When doing any type of CPU or GPU intensive work, such as video encoding, or even playing a flash application with lots of things going on, it would jsut die. Lights out, not even the battery or charging lights would come on. Pressing the power button would do nothing either. I had to unplug, take the battery out, put it back in, wait about 10 mins then restart and pray for no BSOD.
I thought it was the power source, but since it was just shutting off randomly, (a symptom of an overheating GPU or CPU) I decided to clean out the fan first (I was out of warrenty).
If that sounds like your problem, I recommend you try the following. If it doesn't fix it, then you're out about $15 and a half-hour of your time. If your machine is out of warrenty, or if you don't want to wait a couple weeks for your laptop to return from the depot, definitely try this. Its cheaper then paying for repairs, and cheaper then getting an assessment of the problem.
Go to a computer parts store, bought a good tube of thermal paste (cost like $15) and some compressed air. Get the good stuff if you have a good processor. It works much better than the stock stuff.
First unplug your laptop, take the battery out, then Unscrew the Screws at the bottom that hold the palmrest, Keyboard down (they'll be marked) then the screws that hold the bezel (not marked).
Once those are off, draw a quick sketch of the inside components, and as you take screws out, label on your sketch the size/colour of the screw, so everything goes back in correctly.
Then, you'll need to take the top left speaker out, and two metal 'arms' that hold the Fan in place. The fan should then pop out. If there's another screw I'm forgetting about, take it out too.
On the fan, your CPU and GPU, there will be old thermal paste. With a lint-free cloth, with a bit of 70% rubbing alcohol, clean the paste off. Be sure to use something that won't leave residue. Things like TP, kleenex, etc are bad. Coffee Filters work pretty well.
Now with the compressed air, spray out the inside of your laptop, spray the fan out well, and anything else that looks dusty.
Now put a bit of the thermal paste on the CPU and GPU, and pop the fan unit back in place, screw it in immediately. Put the rest of the components back together, and while you're at it, take the time to blow out your keyboard, as I'm sure its full of dust, crumbs ,hair, and other fun stuff.
This would likely solve your problem for under $20. And best yet, you don't have to ship your laptop away for a few weeks.
In my case, I thought there were bigger problems. After cleaning/replacing the fan, I haven't had an issue at all, its been a few months. I can encode video, run graphically intensive programs/games, etc. without an issue. CPU/GPU temps don't get nearly as bad as they did.
Hope that helps your problem.
T61 15.4" T9300 (2.5GHz 6MB L2) Windows 7 Professional x64 4GB Memory, NVidia Quadro NVS 140M

Firefox will not start up ive tried everything even uninstalling it and it wont do that either

ive used mozzila firefox for 3 years and now all of a sudden it will not start up at all,i have firefox 4.0 beta6 ive tried to uninstall but it doest do it

One of your add-ons might be the culprit. Try running Firefox in [[Safe Mode]]. If that solves the problem, see [[Troubleshooting extensions and themes]] and possibly [[Troubleshooting plugins]]
~~~~~~~~~~~
If that does not solve the problem, [http://support.mozilla.com/en-US/kb/Managing+profiles#Creating_a_profile create a new profile] Then, Recover your data from the old profile. See http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile'

My macbook will not start up. It gets stuck on the page with the apple and the pinwheel. Can anyone assist?

My macbook will not start up. It gets stuck on teh opening page with the apple. It was working fine and all of a sudden i cant get it to work. Does anyone know what could be wrong with it? Or, is there a bypass to the start up page?

You won't lose your files unless something goes very wrong -- which may already have happened. You absolutely must have a backup before you do anything else. If you don't already have one, boot from your installation disc and follow the instructions in this article under "Instructions for backing up to an external hard disk via Disk Utility":
Mac OS X v10.5, v10.6: How to back up and restore your files

IPhoto suddenly will not drag

My iPhoto suddenly will not drag and drop, nor can I email, or upload to Facebook from iPhoto. I can upload from my iPhone just fine but can not use the photos once they are in iPhoto. I have never had this problem before, it just started. Any suggestions as to what might be causing this?

The disk must be formatted Mac OS Extended (Journaled)
iPhoto needs to have the Library sitting on disk formatted Mac OS Extended (Journaled). Users with the Library sitting on disks otherwise formatted regularly report issues including, but not limited to, importing, exporting, saving edits and sharing the photos.

MacBook will not start up (no display, no chime)

I have a MacBook (white plastic housing, Intel Core 2 Duo processor) that will not start up. I had replaced an original crashed Toshiba hard drive with a new Seagate drive. That worked well for about 3 months, then suddenly the new HD was causing problems and even reinstalling OS X would not work (installation could not be completed). I sent the Seagate drive back under warranty, and they replaced it with a refurb drive of the same model. (Presumably this means they confirmed that the HD I sent back in was defective.)
Yesterday I installed the refurb drive, and now the MacBook will not boot up, even to the OS X install DVD in the optical drive. Booting up holding down "C" or option does not help. When I press the power button, there is no chime and the display does not come on, but the white power light on the front right of the case is on. The optical drive spins up, and there is a very brief flash on the display, but then nothing happens. After a few minutes, the optical drive spins down, and I power down by holding the power button. I tried booting up without a HD installed, and the same occurs.
Any suggestions? Thanks in advance.

It often is useful if you indicate what exact MBP you have and the OS you have installed.
Try SMC and PRAM resets:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/ht1379
Ciao.

ITunes is installed but it will not start

I just updated iTunes and the progam shows as being installed but iTunes will not start.

I have had this problem - started two days ago. (Win 7 Enterprise 64-bit OS.) I have not added anything new recently that could cause a conflict (upgrades, new software, etc). Suddenly it didn't work - will not open. In Windows Task Manager I can see that it starts and then stops without opening. I've plugged in my IPhone, IPad and IPod and nothing will connect. Some forum threads suggest removing/reinstalling QuickTime and some have found that to work. Didn't for me. It will open if "Run as Administrator" is used, but that - according to threads - suggests third-party add ons as a problem. Not the case with mine. I completely removed all of the ITunes software (Bonjour, Mobile Support, etc.) and reinstalled. Nothing changed. I am so frustrated with Apple on this - I found nothing in the support discussions to help. Quite frankly, I do not understand why Apple, with tech equipment that is so well designed and elegant, still puts out such a lousy piece of software that you are held hostage to use. I have hit a wall - I hope you get a response and help! I've run out of ideas!

Finder folder with question mark, now will not start at all!!!

Hey guys, I was working in Avid and i opened up Quicktime, all of a sudden i got a crash log. So i restarted, upon restart i got the finder folder with the blinking question mark. I tried restarting with the OS9 cd by holding down the C button, no luck there. So i moved onto the next step, resetting the PRAM, no luck there (just sat on black for numerous minutes until i let up, then the folder came back). Then I moved onto resetting th PMU, now it will not start up at all. I restart, and all i see is a black screen, nothing. Any help appreciated. Thanks in advance.
The machine im workin on is a Powermac G4 (quicksilver), OS9, 1.5 G Ram, machine bases around Avid Editing system
Rhyno

Ok let me clarify this.
1)system crashed restarted and got the folder with the ?
2) tried to boot from the OS 9 CD no luck? it did not boot?
3)reset pram and still the flashing ?
4) Reset the PMU chip and the mac is dead won't start up at all?
a couple of ideas too...
did you press the pmu button more than once?
Check to make sure the power cord is plugged in correctly etc.
Check the Pram battery to see if it might be dead it should read between 3.3v and 3.7v
also try to restart the computer without other devices plugged into it (USB Firewire, keyboard, even monitor.
hmm...
iBook G4 Mac OS X (10.4.3)

Dreamwever suddenly will not start.

Similar Messages

Maybe you are looking for