Dreavweaver CS3 Loses All Logins and Passwords Regularly

Dreamweaver CS3 regularly loses all saved logins and passwords.
All I have to do is closeout Dreamweaver, shut down Windows, reboot, then open Dreamweaver and all my saved passwords and logins are gone. This doesn't happen every time, but has happend 3 times over the past two months.
Any ideas on how to avoid this? any ideas how to get back all of my saved passwords and logins, so I don't have to re-enter them all the time?
I'm running CS3
Windows XP Professional
Version 2002
Service Pack 3
Intel(R) Core(TM) 2 Quad CPU
Q6600 @ 2.40GHz
2.39 GHz, 3.00 GB of RAM

Although it's for DW8, does any of this help?
http://kb2.adobe.com/cps/349/3491671c.html

Similar Messages

How can I force ALL logins and passwords to save/remember

I have upgraded to Firefox 8.0. However I can no longer force force Firefox to remember my logins and passwords for certain sites. I was able to do this with my old version by changing some config setting. However, I can not find anything about 8.0 where I can do that again. I'm running XP Pro. Can anyone help? Thanks.

The website may be using autocomplete=off to prevent Firefox from saving the name and password.
You can remove autocomplete=off with a bookmarklet to make Firefox save the name and password.
*http://kb.mozillazine.org/User_name_and_password_not_remembered
See also:
*Saved Password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/

All Safari Logins and Passwords LOST upgrading from Mavericks

All my Safari Logins and Passwords were LOST upgrading from Mavericks.
There were HUNDREDS of them.
HOW DO I GET THEM BACK????
I did a Time Machine Backup.
Is there a way to get the file with al those?

http://www.roboform.com/support/news
Version 7.3.2
* Firefox 5: add support for Firefox 5.

Lost administrator login and password.

We can't download new software etc. because we lost our administrator login and password. How do we reset it? Will we lose all of our files?

Insert the install disk that came with your MacBook. Reboot holding the C Key down. Once it boots from the install disk continue until you get to a window the has the menu bar across the top. Look under Utilities and find the *Reset Password* item. Change it and you should be able to log in again once you reboot your system.

Saving login and password of the server in MD5-Challenge

I want to authenticate the server automatically using MD5-Challenge with Cisco Secure ACS4.1.
When I unplugged and plugged the network cable, it always prompt for login and password.
How can I avoid this process?
What can I do if I want to have authentication automatically at the start-up of my server.
Note: All the fonctionnality of the ACS server is OK

This is a function of the server. How this will work, if at all, depends on which type of server you have.
Which server, which network device and what scenario are you using with MD5?

No CD, can't change admin login and password???

Hi...Please help. I do not have a startup disk and cannot change the aministrator login and password...what do I do?

Hi skyjac, and a warm welcome to the forums!
Reset OS X Password Without an OS X CD...
http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/
Admin Hack...
http://www.hackmac.org/?q=node/4
Starts up like the first time you buy a new Mac, but after filling in all that info again, you should have access to the computer and the other Users & files will still be there... though I was just thinking, this new User probably shouldn't be the same name as an existing one.
If that doesn't work for you (and some users have reported it has not worked for them), try Niel's procedure Making the Setup Assistant reappear.
http://discussions.apple.com/thread.jspa?messageID=607547
I lost my admin user (Mac OS X 10.4 and earlier) ...
http://discussions.apple.com/thread.jspa?threadID=121786&tstart=0

FTP login and password are not saved on some sites

On some of my sites the FTP login and password are not saved
(even though the "saved" box is checked). Dreamweaver 8.0 on XP
SP2. I can export the site information and then import the same
file exported and there still will be no login or password placed
in the login or password window. I opened the exported .ste files
in notepad and found the login correct and the password incorrect.
I uninstalled Dreamveaver and reinstalled still same
problem.

Ok, I just spent about 3 hours on this. Here's the latest
that I've found. I had looked at the knowledgebase and my registry
matched what was suggested. As this has been an ongoing issue for
me, I thought it was still an issue. Apparently 8.02 did have some
improvements.
I can only guess that many of the 36 sites I have in the Site
Manager lost info before the .02 update.. or I hope so.
I did however discover that there is still what could be
considered a minor bug. I went in to Manage Sites and selected edit
for all of my sites, fixing the ones that had lost their user/pass
info. I'm not positive, but I think only the last edited site kept
it's data.
I discovered after many checks on all the sites, over and
over and over, that it appears that they are now holding the data,
but, if I add the user/pass, I must not only click the OK button to
close that particular site, but I must also click the 'Done' button
before only that one will be saved.
So, I thought I was fixing logins when in fact I was only
fixing one at a time.. Completely closing 'Manage Site' seemed to
hold one new set of login data each time. Seems that it shouldn't
be this way.
But I must say, I am rejoicing at the moment, as I actually
have all my sites set up with FTP info and I am now looking forward
to hopefully adding more and maybe they'll actually be available
for the next editing session.

How to get safari to remember login and password after I said do not remember

I went to a website through Safari and logged in and accidentally hit Never remember for this site and now I cannot get safari to remember the login and password. I have gone through preferences/passwords and the site is not listed and it will not allow me to add a site. I would love help with this since I log on to this site just about every day! Any suggestions?

It might be a corrupted keychain ...
Open Keychain Access located in HD > Applications > Utilities
Open Keychain Access then select Passwords on the left.
Right or control click a keychain then click Delete.
Back to Safari. Login to the website you want the password autofilled.
Click Yes when prompted to save that data to a new keychain.
Keep in mind, not all websites espcially financial institutions allow the autofill feature.

Conference link with login and password included

Hi,
I have been trying to find a way to make Adobe Connect send meeting invitation e-mails with login and password included in the link - unfortunately to no avail.
Does anyone know, if it's at all possible to do it and if so, how it's done?
I'm still on a trial version, but I've been assured, that it shoudn't be a problem.
Thanks in advance for any hints!
Kamil

OK, I played with it and here is how I got it to work:
Appending the URL:
The URL would need to be appended with /?login=username&password=password. The "api/xml?action=" string was incorrect. I verified that this does work.
The full URL would look similar to this: http://realeyesconnect.adobeconnect.com/bestroomever/?login=myusername&password=drowssap
The login can also be done programmatically.You would need to do the following steps to get the log-in to be automatic.
Log the individual into the server:http://YourServerURL/api/xml?action=login&login=username&password=password
Should return a value of OK
Get the BREEZESESSION cookie for the user:
http://YourServerURL/api/xml?action=common-infoShould show a value similar to this:<cookie>na3breezr59qzu2pp2qy4zdm</cookie>
Log the user in to the room with the cookie:http://YourServerURL/RoomLink/?session=na3breezr59qzu2pp2qy3zdm
Guest names can also be added to the url link. These options are described here: http://help.adobe.com/en_US/connect/9.0/webservices/WS5b3ccc516d4fbf351e63e3d11a171dd2d4-7 ff4_SP1.html

Workspace- login and password

Hi
I am having problems logging onto workspace and reporting studio..I have got 9.3.1 version installed on my laptop..Shared services is working properly..
I had been using the same "admin" and "password" for all of them..But, now a days, when I try to log on to workspace using the same login and password, it pops up a message reading "invalid user id or invalid password". can any one pls help me sort this problem...
Thanks

You might want to try bouncing Shared Services and Workspace.
I occassionally have trouble with my VM if I don't shut down properly.
Regards,
Cameron Lackpour

Captive Wi-Fi network not saving login and password

Since yesterday my iPhone 5S stopped asking if I want to save the login and password information when start a session on a captive Wi-Fi network. The settings Safari>Passwords & Autofill is on and Safari isn't in Private mode. It was working until yesterday and had the option to automatically fill in when I touched the login field.
Any help would be greatly appreciated. Thanks
iPhone 5S - iOS 8.0.2

Well, I tried to duplicate what you talked about. I have my wireless here at home, and I chose, "Forget this network" and when I went to rejoin, it asked for a password. Many public networks take their username and password through the browser. Have you tried to open Safari to see if it will default to the username/password screen? I've used mine at hotels that change their access every 24 hours and if I try to log back on after the time, it defaults back to the login screen. That is the only solution that I can think of. And yes, if you go to settings and reset network settings, it will clear all of them.

Why can't I use the same login and password for apps and cloud

I try to go on to face time and it asks for my login and password which works
ok with the App Store but is not recognised when using face time or I cloud

You can, if logged in using the same Apple ID for all.

OWB 10gr2 - Location Login and Password

I can't find in which tables are stored login and password of locations.
Thanks,
Marco

Hi
Locations in OWB are like db links and i dont think that passowrds or user names of dblinks/locations are stored in Repository Tables(Plz correct me if im wrong)
Locations point to the schema at which you are creating your objects using OWB. When you created a module and assign a location, it means that all the objects created in that module will be created in the Schema pointed by the Login Id of a Location.
To get information regarding the schema/users/login you can go to design center and right click on the module and choose open editor. and then click on the .... Tab
Ther you can find the schema/users/login as USER NAME and for passwords you need to refer to your DBA. You can also know the username from the Locations of Connection Explorer in Design Center.
Please let me know why do u need this info.
I hope this is what you were looking for.
Regards
Vibhuti

Safari 7 Preferences: I can't delete a web site login and password

Hello:
I can't delete a safari web site login and password
After tapping delete all there is 1 item still in the box.
¿How can I delete it?
Thak's in advance,
Luis

I had the same problem, and the solution was to delete the entries using the Keychain Access tool, found in Applications → Utilities. You can search for the entry there, remove it, and then it will be deleted from Safari as well.
(I had to do this when I changed my email address on Amazon, and all the auto-login pages had the old email addresses and wouldn't update. I tried to delete them from Safari's passwords dialog and ran into the problem you described).
Note that this question provides the same answer in more detail.

When I enter a website, FireFox used to auto login and password. Now is does NOT. If I choose remember me check box, the website remembers me but I still have to enter a password. I think this is a problem created with website programming.

The problem is with most websites but not all. When I try to login to this website to ask this question, I have recorded 3 logins. Only one works, but that is a different problem. The websites used to automatically login and suddenly don't. I believe the problem is a change in programming for the website programmers. I found a solution (not a viable one) previously here that is supposed to remember login and password through a laborious process, but that is really cumbersome and doesn't always work either. Today I cannot find that process to try it. I am trying to login to ATT website which was just changed.

Here are two screen shots to show you what I am seeing. The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as). The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue). However when I click on the user "Orion" nothing happens. It will not change to highlight that user.

Dreavweaver CS3 Loses All Logins and Passwords Regularly

Similar Messages

Maybe you are looking for