Drill Down and customer Exit variable

Hello together and A Happy New Year!
Please help me with the following topic:
I have a query with 4 selections(fields) in the columns.
In the first selection (F1) I have resctricion to Posting Period via Period to (a user entry variable).
In F2 I have restriction to Posting Period via Period to cust (customer exit based on value of V1 - introduced by the user)
In F3 I have restriction to PP via Period from, Period to (between: user entry variables)
In F4 restriction to PP fia Period from cust, Period to cust (between: customer exit variables)
In the query, if I select in the selection screen Period from 1 and Period to 3, for example, when I make the drill down, only 3 (Period to) is displayed instead of 1, 2 and 3.
If in the query designer I remove from the columns F1 and F2, then the drill down is working properly (having intervals in the other fields: F3 and F4).
Do you have any idea why drill down is not working properly with all 4 fields in the columns?
Thank you,
Iuliana

Hello,
Is there anyone who could help me?
Thank you,
Iuliana

Similar Messages

How to find out the customer exit and sap exit variables created provider?

Hi all,
How to identify what are all the customer exit and sap exit variables are been created for an info provider. is there any tables which allow us to find out.
thanxs
haritha

Hello haritha,
SAP Exit and Customer Exit variables are created for Characteristics and not for individual InfoProviders.
So whenever the characteristic is used in the InfoProvider, by selection the appropriate variable the exit can be called.
So the same Exit can be in one or more InfoProviders.
Hope it helps.
Thanks,
Chandran

Need Drill down in Customer Open Item Analysis by Balance of Overdue Items

In SAP there is one standard report by the name of
'Customer Open Item Analysis by Balance of Overdue Items'
Can I change the report according to my need.. I want to add drill down and customer name to this report. I am using summarisation 6 as my criteria.
Thanks
Sajid Hakeem

Dave!
Thanks for the help man
Just one last thing
can you help us to add drill down facility in the prescribed report. what code we should write to make it drill down to a line item report.
Regards
Sajid Hakeem

Customer Exit variable and Filter routine in DTP does not works?

Hello Experts,
Does anyone know what might be the possible reason - A customer exit variable working fine on the OLAP side does not work in a DTP??
I have also tried to use the Filter routine, which does not give me the right results..I am trying to fetch a Fiscalyear period maintained in an infoObject as follows in my Filter routine..
ata: sel_period like /BIC/PZPARAM-/BIC/ZPARAMVAL.
DATA: zperiod type /BI0/OIFISCPER.
          SELECT SINGLE /BIC/ZPARAMVAL INTO sel_period
          FROM /BIC/PZPARAM
          WHERE /BIC/ZPARAM = 'ZPCA'
          AND objvers = 'A'.
          zperiod = sel_period.
data: l_idx like sy-tabix.
          read table l_t_range with key
               fieldname = 'FISCPER'.
          l_idx = sy-tabix.
          l_t_range-iobjnm = '0FISCPER'.
          l_t_range-fieldname = 'FISCPER'.
          l_t_range-sign = 'I'.
          l_t_range-option = 'EQ'.
          l_t_range-low = zperiod.
          if l_idx <> 0.
            modify l_t_range index l_idx.
          else.
            append l_t_range.
          endif.
          p_subrc = 0.
Please let me know if I am making any mistakes above..
Kind Regards,
Kadriks

Hi
1. CLEAR l_t_range-high. is missing in your code befor assigning values to l_t_range.
2. use simple append l_t_range after the l_t_range asisgnments. remove below code :
if l_idx 0.
modify l_t_range index l_idx.
else.
append l_t_range.
endif.
p_subrc = 0.
3. I dont think you need to assign infoobject.
4. Clear sel_period and zperiod is also missing
Hence your code should be :
data: l_idx like sy-tabix.
read table l_t_range with key
fieldname = 'FISCPER'.
CLEAR l_t_range-high.
l_idx = sy-tabix.
l_t_range-fieldname = 'FISCPER'.
l_t_range-sign = 'I'.
l_t_range-option = 'EQ'.
l_t_range-low = zperiod.
append l_t_range .

Customer Exit Variable and Condition in a Query (Sequence of Execution)

Hi,
For a query i defined a Customer exit variable and a condition....
Which will first execute...wether it is a Variable and then Condition or vise versa
Is there any way we can control sequence of execution
My requirment is first to execute the condition and the variable how can i control this
Thanks

Hi
In your customer exit you will be having a field by name I_STEP which will help you to handle the time of execution of the variable.
Assign points if helpful
Prathish

Customer Exit variable of Query not working in View

Hi,
I have a customer exit variable in my query to calculate the last 6 month period on Calendar month. I have used 0CMONTH for the same and then using offset of 6 on its value range to get it.
Now, I have many views based on this query, which should ideally be having the same filter condition for the calendar month, but it is not happening. Although, it is working fine for the query! The views do not seem to be catching the selection correct.

Hi there,
As far as I Know, yes they exist. The only difference here, is that you build a query with a selection screen, and you execute the query with some selection parameters, and therefore all customer exit variables, offsets, etc, will be read and changed at the runtime execution of the query, and you can rearrange your query visualization drilling down free char., making filters, etc. and storing that visualization in a view.
If you save your view and execute it afterwards, you'll get the same selection parameters to input, the same offsets, etc, that you have with the query, but with a visualization stored by you.
So that should have been working.
Diogo.

Query Drilldown does not Invoke Customer Exit Variables

We have a problem with performing a drilldown in a BEx Analyzer reprot, basically the client is a Trading company and they have inter company trading. We are using the Profit Centre as one of thre u201CFree Characteristicsu201D in the query and hence we are able to drilldown on a Characterictc by Profit Centre.
We are using a couple of BEx query variables (Customer Exit variables) to determine the inter-area and extrenal area profit centres and these profit centres will be different based on the level of Hieracry node selected when the query is initially executed. For example if we assume a hierarchy with has one root node, 3 children under the root node and 2 grand-children under each of the 3 child nodes, now if we are at the root Node of the Hierarchy then every profit centre is internal and there are no external profit centres, similarly if we are at the 2nd node (i.e. one of the child nodes) then everything under that node is internal and everything in the other 2 child nodes is external and so on.
This is where the issue starts for us, since on the report if we select the the node we want to see the results for at the query rumtime (i.e. the Customer Exit Variables are invoked at I_STEP=2 and they select the other nodes of the hierarcy if any and group them into either external or internal) then the results are correct. Now if we were to drilldown, i.e. We selected the root node and we drilldown on to see for example of the child nodes then the result are not correct, this becomes apparent when we drilldown further to the grand-child nodes.
One logical explaination is that when we are doing the drilldowns the customer exit variables are not being invoked in the BEx analyzer report and hence they are not grouping the sums for the internal and external profit centres relevent to node selected in the Drill down.
Does anyone have any suggestions regarding how to make this query work properly or show the correct results in BEx Analyzer (ideally), I have considered the Workbooks option but the client does not want Workbooks.
Please let me know if there is a program etc we can customise to ensure that the Customer Exit variables logic is used when the user does a drilldown in the query or any other way to make it work.
Many Thanks
Jack

Hi
Just to aid anyone who is thinking what to do in a similar situation, I am aware that RRI or using workbooks are a couple of good alternatives (just that these are currently not being considered by the client, hence I am asking here).. Also, if someone has Business Objects WEBI then we can satisfy the requirement by creating a new Webi Report for each of the nodes and displaying it (similar to Workbooks but much nicer and faster) or we can get the Webi to execute the variables again during the drilldown... Unfortunately the client is not using Webi either... So the solution has to be in BEx Analyzer / Query designer based...
If you have any thoughts on how I might be able to do what I want to do then please feel free, I am quite confident that I am not the 1st person to come accross this issue and someone somewhere has solved this issue.
Thanks

Executing customer exit variable in dropdown box. in WAD

hi Experts,
i have implemented two customer exit variables for current month and next síx months in a query and it is working well, and the code for customer exit variable is correct.
we have a requirement to use the customer exit variables in dropdown box in web application designer. in the dropdown box in web application designer i used command SET_SELECTION_STATE_SIMPLE in that 'command specific Parameters' i had given the exit variables current month and next six months.but after executing the web application designer and if i drill down the report with current month and next six months it's giving error message .
can anyone please tell me how to implement customer exit variables in web application designer through drop down box. i am using this in bi7 reports.
Regards
Sruthi Reddy

Hi,
Customer Exit Variable in SAP BI : is used to calculata MTD,YTD, and some other calculations.
You can define variables with Customer Exits and then write code in CMOD. See the Article/Blogs in the same
https://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
CHeck the Following Articles.
Customer Exit Variables in BW/BI Reports
Using Customer Exit Variables in BW or BI Reports Part - 1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/s-u/using%20customer%20exit%20variables%20in%20bw%20or%20bi%20reports%20part%20-%201.pdf
How to use Customer Exit Variables in BW Reports: Part - 2
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/g-i/how%20to%20use%20customer%20exit%20variables%20in%20bw%20reports%3a%20part%202.pdf
Using Customer Exit Variables in BW/BI Reports Part - 3
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10fc4382-afa6-2c10-1380-fa224fe4324f&overridelayout=true
Using Customer Exit Variables in BW/BI Reports: Part - 4
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0fefc77-40e3-2c10-8da3-d4bfcb013387?quicklink=index&overridelayout=true
Calculating the Ageing of the Materials
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/a-c/calculating%20the%20ageing%20of%20the%20materials.pdf
Thanks
Reddy

Default value of BeX customer Exit variable not Displayed in WeBI??

Hello Experts,
We are stuck with a problem where WeBI report is created on top of BeX query and we are not able to see the default value of Bex Customer exit variable in WeBI run. Here is the complete scenario:
1. One restricted KF is created in BeX, restricted with Customer exit variable on net Due date. And this variable is mandatory, ready for input, and Default value in calculated is user exit as current Week's Monday.
2. So, by default KF data should be restricted to Monday of current week, if user does not change this value.
3. Now, WeBI report is created on top of this Bex query, and all is working fine, i.e. we are getting variable as Prompt in WeBI, but Default value is not shown while Running the Webi Report.
So, need your inputs on the same, if default values from BeX in WeBI is supported or not? If yes, why this is happening, and how to resolve it?
Please notice, the restrcition is in KF only, it is not a separate restrcition on Net Due date in Filter area or in Defualt area of BeX
and we are on SAP BW 7.1 and BOXI 3.1 SP4.
Regards,
Vipul
Edited by: VIPUL GOYAL on Nov 23, 2011 9:44 PM

Hi,
See 1285993 - Support of Customer Exit Variables from BEx query into WebIntelligence via OLAP universe
WebI will prompt when executed, but the default values calculated by the user exit - do not appear.
Note: If the BEx variable has property 'ready for input' set / enabled, then its WebI prompt shows ok, but no default value appears.
Cause
This behaviour expected 'by design' (in the context of the product's current limitations) as explained in the online guide below:
Please refer to Chapter 7, page 44, document link here: http://help.sap.com/businessobject/product_guides/boexir3/en/xi3_sap_olap_universes_en.pdf
Characteristic variable > processing type > Customer Exit is "Supported, without user entry"
--> This should be understood as meaning "User will not be shown a prompt"
regards,
H

Display Error Message in BW Report based on Customer Exit Variable

Hi
I need to display an error message in the BW report based on the value of a customer exit variable - i was able to do this successfully in BW3.5 using the below code.
WHEN 'ZUPN'. "Here ZUPN is the customer exit variable
    IF i_step = 1.
      <check for condition -- if successful, variable flag = 1, else variable flag = 0>
      IF flag = 0.
        MESSAGE e157(00). "Error Message
      ENDIF.
    ENDIF.
I have upgraded my system to BI 7.0 now. Whenever the variable check is not successful, it displays a blank screen instead of the error message in the report. Please advice if we need to change the code and how ??

Bhanu,
Thanks for u r reply.This warning message appears every time i execute the report through portal.
Any idea ?
Regards
Mano

Customer exit variable - internal table in BEX

Hi,
i am running a report and using variables in it.
The report runs over a info cube. There are few challenges in it.
One of the variable is posting date, and when user enters posting date i need to negate it with current system date.
If the negated value is greater than 28 then i need to exclude documnet type 'YG' and display the query, else i need to include the dcumnet type 'YG' and document type ' '. The above logic can be well implemented via a customer exit variable(for posting date) using an internal table. We have internal tables like C_T_DATA which is used in data source enhancement, which help us to implement our own desired logic.
Do we have such kind of internal tables, based on which the report output (result set) is derived?
i know that we have l_t_range and e_t_range, but dont know their usage, some one can explain in detail about them?
Thanks in advance.

Hi Selva & Lakshmin,
The code given by Selva is almost correct . If my understanding is clear , you also wanted to include document type ' ' when the negated value is less than 28 .
Modification in Selvas Code :
Variable 'V_DOCTYP' must be of type Multiple Single Values.
DATA : V_DATE LIKE SY-DATUM.
DATA : V_DAYS TYPE I.
if i_step = 2.
when 'V_DOCTYP'.
READ TABLE i_t_var_range INTO loc_var_range WITH KEY vnam = 'ZV_PDATE''.
IF SY-SUBRC = 0.
V_DATE = loc_var_range-low.
ENDIF.
V_DAYS = SY-DATUM - V_DATE.
IF V_DAYS > 28.
l_s_range-low = 'YG'
l_s_range-sign = 'E'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
ELSE.
l_s_range-low = 'YG'
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
clear l_s_range.
l_s_range-low = ' '.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
ENDIF.
ENDIF.
Hope the above reply was helpful.
Kind Regards,
Ashutosh Singh

Customer Exit Variable not working in BO-Webi Report

Hi All,
I have created a universe based on Bex Query.
Bex query consists of a customer exit variable on Calendar year/month where in it will populate current calendar year month by default while executing the query. It works fine while executing in SAP BI Bex Analyser.
I have created a universe based on the query. For Calender year/Month i got L00, L01, LOV values in universe.
Based on the universe I have created a Webi report. I did not specify calendar year/month as query filters. While directly executing the Webi report, I get the calendar year/month variable screen. But the value for it not populated based on customer Exit code written in BI.
What has to be done to get the customer exit values in variable screen.
Thanks for your understanding.
-- Selva

Since you have customer exit variable in your bex query, it will be like a global filter in your universe.
Execute the webi report and check whether you are getting only current month data.
--- Thanks

Customer exit variable output error

Hi gurus,
I have created one customer exit variable. in the selection screen i am giving multiple plant and material value,
my code is working for sigle plant and single material.
when i have taken multiple value. i am getting error message
error is 'No value determined for th variable"
When i debug my code in RSRT, it is giving all the values for different combination of plant and material. and those values are getting in the E_T_RANGE.
but out put it is giving the error.
my code is:
WHEN 'ZPRDEMVA'.
    IF i_step = 2.
      READ TABLE I_T_VAR_RANGE INTO LOC_VAR_RANGE
      WITH KEY VNAM = 'ZPRRNDT'.
      v_date = LOC_VAR_RANGE-LOW.
      v_year = v_date+0(4).
      v_month = v_date+4(2).
      v1_date = v_date+6(2).
      v3 = v_year - 1.
      v4 = v_month - 1.
      if v4 = 00.
      v4 = 12.
      v3 = v3 - 1.
      endif.
      concatenate v3 v4 v1_date into ddate.
      CALL FUNCTION 'DATE_GET_WEEK'
        EXPORTING
          DATE         = ddate
        IMPORTING
          WEEK         = zweek
        EXCEPTIONS
          DATE_INVALID = 1
          OTHERS       = 2.
      CALL FUNCTION 'WEEK_GET_FIRST_DAY'
        EXPORTING
          WEEK         = zweek
        IMPORTING
          DATE         = monday
        EXCEPTIONS
          WEEK_INVALID = 1
          OTHERS       = 2.
      sunday = monday + 6.
      v3_date = monday.
      v4_date = sunday.
      LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
              WHERE VNAM = 'ZPRPLNML'.
      CLEAR L_S_RANGE.
        v_werks          = LOC_VAR_RANGE-LOW.
      LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
              WHERE VNAM = 'ZPRMATML'.
      CLEAR L_S_RANGE.
        v_matnr          = LOC_VAR_RANGE-LOW.
      data: dummy_menge like i_mseg-menge value '0.01'.
      Do 52 times.
           select MATERIAL PLANT QUANT_B MOVETYPE
                 from /BIC/AWINO0100 into table i_mseg
                 where PSTNG_DATE between monday and sunday
                 and   MOVETYPE between 261 and 262
                 and   MATERIAL = v_matnr
                 and   PLANT = v_werks.
                     if sy-subrc NE 0.
                       i_mseg-menge = '0.01'.
                       i_mseg-matnr = v_matnr.
                       i_mseg-werks = v_werks.
                       i_mseg-bwart = '261'.
                       append i_mseg.
                     endif.
        loop at i_mseg.
          itab1-matnr = i_mseg-matnr.
          itab1-werks = i_mseg-werks.
          itab1-menge = itab1-menge + i_mseg-menge.
          itab1-bwart = i_mseg-bwart.
          COLLECT i_mseg into itab1.
        endloop.
        sort itab1 by matnr werks bwart.
        loop at itab1 where bwart = '261'.
          itab2-matnr = itab1-matnr.
          itab2-werks = itab1-werks.
          itab2-bwart = itab1-bwart.
          itab2-menge = itab1-menge.
          read table itab1 with key matnr = itab2-matnr
                                    werks = itab2-werks
                                    bwart = '262'.
          if sy-subrc = 0.
            itab2-menge = itab2-menge - itab1-menge.
          endif.
          append itab2.
        endloop.
        clear itab1[].
        refresh itab1.
        sunday = sunday + 7.
        monday = monday + 7.
      ENDDO.
      loop at itab2.
        sum1 = sum1 + itab2-menge.
      endloop.
      average = sum1 / 52.
      loop at itab2.
        sum2 = sum2 + ( ( itab2-menge - average ) * ( itab2-menge - average ) ).
      endloop.
      sum2 = sqrt( sum2 / 52 ).
      l_s_range-sign = 'I'.
      l_s_range-opt = 'EQ'.
      l_s_range-low = sum2.
      Append l_s_range to E_T_RANGE.
      clear itab2[].
      refresh itab2.
      sum1 = 0.
      sum2 = 0.
      monday = v3_date.
      sunday = v4_date.
      ENDLOOP.
      ENDLOOP.
    ENDIF.
Can any one please help me.
Thanks in advance.

Hi Alec,
i created a customer exit with the formula variable only. in the code i am getting the both quantity and unit fields. now i want to get quantity with unit in output.
thanks

Customer Exit Variable in cell definition in BEx

Hi,
I have defined a query with a Structure in Row and Key Figures in column.
The result of query should look like this:
Fiscal/Year Period | Quantity per month | Quantity cumulative
011.2010 (Variable Offset Value -3) | 5 | 5
012.2010 (Variable Offset Value -2) | 6 | 11
001.2011 (Variable Offset Value -1) | 7 | 7
002.2011 (Variable Single Value, Manual Input) | 8 | 15
"Quantity cumulative" is defined as follows:
Quantity cumulative (002.2011) = Quantity 001.2011 + Quantity 002.2011
Quantity cumulative (001.2011) = Quantity 001.2011
Quantity cumulative (012.2010) = Quantity 011.2010 + Quantity 012.2010
Quantity cumulative (011.2010) = Quantity 011.2010
"Fiscal/Year Period" and "Quantity per month" are OK. But I have problem to define the key figrue "Quantity cumulative".
I have defined a Customer Exit Variable on Reference Characteristic "Fiscal/Year Period". Moreover I have also defined cell definition to define each individual cell for key figrue "Quantity cumulative" restricted by Customer Exit Variable.
The Quantity cumulative (002.2011) and Quantity cumulative (001.2011) are calculated correct. But it doesn't work for 012.2010 and 011.2010 (because of previous year).
I would be helpful if you can give some hints.
Thanks

Hi,
try to use this trick with an IF condition in you customer exit. Calling 'var1' the manual input of:
data: month_difference TYPE N.
month_difference = 'var1'+4(3) - 4.
IF month_difference >= 0.
DO the classic code which you have already used.
ELSE month_difference < 0.
DO the replace concatenating manually 'var1'(4) and the single month.
ENDIF.
Hope it helps.
Best regards.
Simone.

Customer Exit Variable in BEx

Hi,
I have defined a query with a Structure in Row and Key Figures in column.
The result of query should look like this:
Fiscal/Year Period | Quantity per month | Quantity cumulative
011.2010 (Variable Offset Value -3) | 5 | 5
012.2010 (Variable Offset Value -2) | 6 | 11
001.2011 (Variable Offset Value -1) | 7 | 7
002.2011 (Variable Singel Value, Manual Input) | 8 | 15
"Quantity cumulative" is defined as follows:
Quantity cumulative (002.2011) = Quantity 001.2011 + Quantity 002.2011
Quantity cumulative (001.2011) = Quantity 001.2011
Quantity cumulative (012.2010) = Quantity 011.2010 + Quantity 012.2010
Quantity cumulative (011.2010) = Quantity 011.2010
"Fiscal/Year Period" and "Quantity per month" are OK. But I have problem to define the key figrue "Quantity cumulative".
I have defined a Customer Exit Variable on Reference Characteristic "Fiscal/Year Period". The Quantity cumulative (002.2011)
and Quantity cumulative (001.2011) are calculated correct. But it doesn't work for 012.2010 and 011.2010 (because of previous year).
I would be helpful if you can give some hints.
Thanks

Hi,
Create a formula "Cumulative Quantity" and add only "Quantity per Month" in the formula. Go to formula properties, Calculations tab, check the Cumulated option.
This works for different years as well.
Regards,
Suzitha.

Drill Down and customer Exit variable

Similar Messages

Maybe you are looking for