Drill Down Arrow error in Crystal Report. Authorization Path

hi all,
i made a report in crystal report with drill down capability with the ff formula:
'http://$b1$/link?table=OPCH&key='&totext(({OPCH.DocNum}),0)
pls see image below for the error display:
http://i264.photobucket.com/albums/ii184/abing430/DrillDownArrowError.jpg
when i run the report in SBO the report display with no problem but when i click the drill down arrow it says "You are not permitted to perform this action : Authorization path". i am using the Manager account w/c is a super user.
pls. help.
thanks
Fidel

hi Gordon,
thanks for the reply.
now i use the ff. Formula as what u have instructed.
'http://$b1$/link?table=OPCH&key='&({OPCH.DocEntry})
this returns an error in formula
'http://$b1$/link?table=OPCH&key='&totext(({OPCH.DocEntry}),0)
this line does not returns an error in formula workshop but i still have the same error....
addtitional information: this is my SBO version
SBO: 8.8
PL: 18
best regards.
Fidel

Similar Messages

Drill-down options on exported Crystal reports (PDF/HTML)

Is it possible to drill-down on the exported crystal reports in PDF/HTML format?

PDF format does not support drill-down.
PDF format supports bookmarking to specific locations in the document, but not something refined as drilling.
Sincerely,
Ted Ueda

Drill down arrow in Crystal Report

Hi,
I've created a crystal report based on a SQL statement that brings some information about service calls.
I would like to include a drill down arrow for service call ID.
I found this as being the link: 'http://$b1$/link?table=OCRD&key='+{OCRD.CardCode} but not sure how to change for what I need. I don't have any tables since I am using a command. Should I bring OSCL table? How do i have to chance it for CallID? I get an error message saying "A string is required".
Thank you for your help!
Cristina

Hi Neetu,
I don't get any error message so thanks for this. I don't have OSCL table, I only have a command based on sql query containing the fields I want. When I replace OSCL with the command name it opens a web page "Internet Explorer cannot display the page" with http://$b1$/link?table=Command&key=6159 address. So it's recognising callID. Do I need to bring OSCL table and link it to my command and use OSCL in the link?
Thank you!
Cristina

Vista/Adobe 9/sql image Error in Crystal Report:Failed to Export the Report

When I try to export my Crystal Report (v2008) from a Vista machine (using Crystal RDC export methods) as a PDF, I get the following error:
Error in Crystal Report: Failed to export the report.
This only happens when a particular subreport (that contains a sql image) prints (based on an input parameter). We have other subreports (within this same report) that print a sql image just fine. But, when this subreport prints, the above error appears.
I can run the same report on an XP machine without error.
Exportmodeller.dll and crtsv.dll are both installed and registered to the
C:\Program Files\Common Files\Business Objects\3.0\bin folder
I have tried opening the report, removing the image, and then adding it back in again to the subreport.
Still receive the same error.
Any suggestions?

>
Don Williams wrote:
> RDC is no longer shipped in CR 2008. You are using the embedded designer used within the Visual Studio .NET IDE and is not licensed for distribution.
>
> Upgrade to the .NET components and post your question to the .NET forums.
>
> Also, those old dll's will not work in CR 2008. Last patches will give you the option to export to Excel in Legacy mode. We built it into our export dll.
Don,
Can you please clarify?
Our VB6 app that uses Crystal XI RDC runtime components. Our Crystal reports are edited in CR2008 SP1 developer edition (not through the VB.NET embedded report designer). We have deployed the CRXIRelease 2 runtime components (via the merge module) to our client machines in order to execute the RDC.
We can print/preview/export to excel, but the pdf creation is failing with this error.
We are only using the RDC (which we know is no longer supported) because of huge issues with the Crystal for .NET methods we are having with our customers (I have an active case for this issue). Therefore, we have to rollback our .NET product and revert to the RDC code.
Vista is failing to create a PDF for a report developed in the CR2008 SP1 developer edition when using the RDC.
When you say "Also, those old dll's will not work in CR 2008. Last patches will give you the option to export to Excel in Legacy mode. We built it into our export dll.", what do you mean by "will not work in CR2008"?
Thank you

How to get actual error from Crystal Report

We are using Crystal report in web service.
We faced some problem due to crystal report unexpected error.
Refer the below error message.
Xception E NSF NSFZ1100 20100608 145511565 GPRAB0 : GPRZ10 GUEC0001 [1] AbstractService Showing a modal dialog box or form when the application is not running in UserInteractive mode is not a valid operation. Specify the ServiceNotification or DefaultDesktopOnly style to display a notification from a service application.
Xception E NSF NSFZ1100 20100608 145511972 GPRAB0 : GPRZ10 GUEC0001 [1] AbstractService at System.Windows.Forms.MessageBox.ShowCore(IWin32Window owner, String text, String caption, MessageBoxButtons buttons, MessageBoxIcon icon, MessageBoxDefaultButton defaultButton, MessageBoxOptions options, Boolean showHelp)
at System.Windows.Forms.MessageBox.Show(String text, String caption, MessageBoxButtons buttons, MessageBoxIcon icon)
at CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e, Boolean suppressMessage)
at CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e)
at CrystalDecisions.Windows.Forms.ReportDocumentBase.GetLastPageNumber()
at CrystalDecisions.Windows.Forms.ReportDocumentBase.GetLastPage()
at CrystalDecisions.Windows.Forms.DocumentControl.ShowLastPage()
at CrystalDecisions.Windows.Forms.PageView.ShowLastPage()
at Biz.Nissan.Cats.CORE.REPORT.LibCrystalReport.TotalPageCount(ReportDocument Rpt)
at Biz.Nissan.Cats.CORE.REPORT.LibCrystalReport.Print(BaseReport RptDefinition)
at Biz.Nissan.Cats.CORE.REPORT.MCTLIST260Print.Print(IFData ifData)
at Biz.Nissan.W3.CATS.BC.Service.DistributeService.ExecuteMpp()
How we get the actual error from crystal report?
Thanks in Advance

Same as
crystal report unexpected error in Web service (IIS)
Closing this thread.
Ludek

How do I get the drill-down arrow to display in Messages/Alerts?

Hello Experts,
We have created the following query and added it to alerts management to notify certain users when a production order is closed.
SELECT T0.[DocNum], T0.[ItemCode], T0.[Status] FROM OWOR T0 WHERE T0.[status] = 'L' and T0.[U_RD] is null AND datediff(mi,U_Status_Update,getdate()) <= 5 FOR BROWSE
I would like to have a drill-down arrow in the alert message that gets sent out to users.
I have searched the forums and discovered that adding FOR BROWSE to the end of the query creates the orange drill-down arrow when the query is executed which is great but the drill-down arrow still does not show in the internal mail message sent out to users.
Can drill-down links be included in alerts/messages and if so, what have I done wrong?
Thank you kindly,
Richard
SAP Business One Version 8.8 PL:15

Hi Richard,
Based on my experience, I don't think drill-down links can be included in alerts/messages.
Thanks,
Gordon

Multi Value Parameter in SP error in Crystal Report SAP B1 ?

Hi Experts ,
i am Getting an error in Crystal Report
"Failed to retrieve data from the database. Details: 42000:[Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near '('. [Database vendor code: 120]"
I an executing the SP In Command , I want to pass multi value parameter in SP
When Pressing ok
than On Ok Button Error come
So I have Some Question
1> Why All parameter in Commend Are Automatic getting Compulsory and How to Avoid It?
2> How to Solve this error ? this error is only coming with multivalued parameter ?
i have many report in which i have to send the multi value parameter into query it self so , Plz Help Me
I am New to Crystal Report so it will be Kind Of you if explain with example .
Thankks in Advance !!!
Regards,
Mayank Shah

Hi Shachar,
i will explain one because i think some thing is misunderstood
please the images
when all parameter record selected and no parameter record selected ... i want all record should display
this blank report is problem
Regards,
Mayank Shah

Error deploying Crystal Report XI R2 to Enterprise - Failed to read paramet

Error deploying Crystal Report XI R2 to Enterprise - Failed to read parameter object.
I know this issue has been addressed several times and the solution recommended was to install Service Pack 2. I have done that. It started working for me too; however recently I got some error saying some UDF***.DLL is missing. I re-installed Crystal Reports XI R2 and Service Pack 2. Unfortunately though, this error is back. I have restarted the machine n number of times but keep on getting this error.
My report file has dynamic parameters defined through command object (SQL Query). My understanding is that once I publish the report to BoE Enterprise, BO will create LOVs and BV's in the repository. Now that is not happening.
has any one else had this issue before and resolved it?
Thanks

Hi,
do you export your CR report in your BOBJ repository using an account with administrator rights?
Regards,
Stratos

Error with crystal report using SAP GUI

Hi,
While using crystal report in sap gui i get the following error. I already googled and only found one thing on this forum that talks about this and it was never solve. Can you please help me? Thank you
Errors in Crystal Reports Installation(SupportsSAPQuery)
Message no.ALVHT218
Diagnosis:
This function requires that Seagate Crystal Reports and the Functional Area drivers(InfosetDrivers) from Seagate software are installed.
This sotware is either not available on your frontend or has been installed with errors
System Response:
The action has been terminated
Once again
thank you

Hi
Please check if you have installed all the SAP transports which are required for Crystal Reports to run based off SAP.
Regards
Sourashree

Drill down arrow

Hello,
I would like to add a drill down arrow somewhere on the service call window (i.e. the UDF panel) that would open a (SC related) invoice number in another field.
Is that possible and how do you do it?
Any other suggestions to that effect are also welcome.
Thank you.

Hi J B,
You can use the linked button object to achieve this. You could add it to the main form, along with the edittext that will hold the key (DocEntry) to your invoice.
Item oItem = oForm.Items.Add("my_lb", BoFormItemTypes.it_LINKED_BUTTON);
oItem.LinkTo = "key_edittext_uid";
LinkedButton lb = oItem as LinkedButton;
lb.LinkedObject = BoLinkedObject.lf_Invoice;
Good luck.
Best regards,
Pedro Magueija

How to Resolve Join Syntax Errors in Crystal Reports 11.5

Weu2019re upgrading form Crystal Reports Runtime Client 10.0 to 11.5. I have a registry fix that resolves the join syntax errors in Crystal Reports 10.0 by updating the registry key:
[HKEY_LOCAL_MACHINE\Software\Crystal Decisions\10.0\Crystal Reports\Database\QueryBuilder\JoinBuilder]
"SQLServerJoinBuilder"="adbc"
What is the fix for Crystal Runtime 11.5?

Create a new key under:
HKEY_CURRENT_USER\Software\Business Objects\Suite 11.5\Crystal Reports\Database\QueryBuilder\JoinBuilder and add the values
"SQLServerJoinBuilder"="adbc"

Dynamic Drill Down Column wise in Webi Report

Hi All,
I need to have dynamic drill down functionality in my webi report.
For example
I have Columns;
Fiscal Year, Fiscal Quarter, Plant, No. of PO line (4 columns).
Drill down on Plant level.
When i click on plant a new column should be added in webi report.
Now my report should look like this;
Fiscal Year, Fiscal Quarter, Plant, Buyer, No. of PO line (5 columns)...(New column Buyer is added)
How to do this.
Please help me guys.
Thanks in advances!!!
Regards,
Gaurav Nayar

Hi,
What you want is possible as long as the table formatting you have helps.
What you can do is add a column to the table. Then use the following formulas
Formula in Column Name Cell:
=If(Drillfilters([Plant])="") Then "" Else Nameof([Buyer])
Formula in Column Values Cell:
=If(Drillfilters([Plant])="") Then "" Else ([Buyer])
Now, what I meant by "as long as your table formatting you have helps" is that, you need to change the border colors of the extra column to match with the report blank area, means the borders should be white in colour and the column width should be autofit and they wont be visible as they are white, once you drill on plants, the values come up.
So if your table has no border, that will be perfect.
Hope this helps.

Getting "The product key is not valid. INS00140" error during Crystal Report 2013 installation

We are getting “The product key is not valid. INS00140” error during Crystal Report 2013 installation. We are trying to install crystal report on Windows 7 64 bit OS.
Can anyone help?

What is CrystalReportsJava-2013? Where did this come from - download link? CD?
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Temporary error "A Crystal Reports job failed because a free license ..."

Hi all,
We coded with VS 2003 a .NET 1.1 application which using the Crystal Report 9 Redistribution package .NET ready to display reports from measured data from our device. The data is stored in a SQL Server 2000 MSDE. Crystal Report has his own DB connection to the SQL server to read the data to display the report.
Our application runs well on approx. 100 distributed installations. But on six customers installation we get this error. Actual on two customers PCs using the same DB we get the error "A Crystal Reports job failed because a free license could not be obtained in the time allocated.". This error pop up every time, when the report is shown. Although the report get shown completely.
I observed in the 'Windows Event Viewer => "System" log after the above-mentioned error following entry "Crystal Report job was delayed 2 (sec)." once for every time when the user requested a report.
I restored an empty DB on customers PC and the error don't pop up anymore.
All CR .NET assemblies have the version 9.2.3300.0. I tested also the "CrystalReportNET_keycodefix.zip", but it doesn't help. I had checked for hours all the issues about this error message on the internet. I tested the most fitting solutions, but not one fix the problem.
I tested customers full DB on my Virtual Machine with same installation, but I don't get the error.
Cheers
Ronny

Hi Ludek 
 
Thanks for your answer. I checked all the things you asked me to do on both system. 
 
Here are the results from my investigations: 
 
1) The keycode.dll was not on the not working PC. 
I copied it to the root of C: as on the working PC. I registered it with regsvr32.exe and tested the issue. 
=> The problem still exist. 
 
 
 
2) I compared the keycode on both system: 
HKLM\SOFTWARE\Crystal Decisions\9.0\Crystal Reports\Keycodes\CR Ent 
 
non working PC: 
1 AAP50-GS00000-U7000RN 131203342 3979604006 
The code is different in comparison to the working PC, because I carried out the 'CrystalReportNET_keycodefix.zip'. Before this I made an export of the above registry key. Afterwards I wasn't able to merge this export (backup) again with the registry. I assume due to the included carriage returns in the keycode. 
 
working PC 
1 XXXXX 
 
 
 
3) I used the Process Monitor and got following error during the error sequence: 
 
I list only some key entries from the hundreds of error entries. Please inform me, how I can provide you the full logger files. 
 
non working PC: 
WriteFile C:\...\Administrator.QCNIR002\Local Settings\temp\~cpe{AD83....} Fast IO Disallowed 
RegEnumKey HKCR\Drive\shellex\FolderExtensions NO MORE ENTRIES 
RegOpenKey HKLM\Software\Crystal Decisions\9.0\Crystal Reports\Database NAME NOT FOUND 
RegOpenKey HKCU\Software\Crystal Decisions\9.0\Crystal Reports\Database NAME NOT FOUND 
RegOpenKey HKLM\Software\Policies\Microsoft\Windows NT\DnsClient NAME NOT FOUND 
 
But I observed beside the results: No more entries, Name not found, Fast IO Disallowed, Buffer overflow (RegQueryKey) and Range not locked (UnlockFileSingle of printer driver) no other errors. 
 
 
working PC 
Operation: Path: Result: 
WriteFile C:\...\Administrator\Local Settings\temp\~cpe{AD83....} Fast IO Disallowed 
RegEnumKey HKCR\Drive\shellex\FolderExtensions NO MORE ENTRIES 
RegOpenKey HKLM\Software\Crystal Decisions\9.0\Crystal Reports\Database NAME NOT FOUND 
RegOpenKey HKCU\Software\Crystal Decisions\9.0\Crystal Reports\Database NAME NOT FOUND 
 
 
 
4) Service Packs 
We could only compare the file size of the Merge Module we used with the one you provided me in the above link. 
 
<table border=0 cellpadding=0 cellspacing=0>
<tr>
<td>file name</td>
<td>file size of used Merge Module</td>
<td>file size of SP1 Merge Module</td>
</tr>
<tr>
<td width=150>crnetruntime.msm</td>
<td width=100>4'764'672 Byte</td>
<td width=100>4'770'304 Byte</td>
</tr>
<tr>
<td>license.msm</td>
<td>578'048 Byte</td>
<td>578'048 Byte</td>
</tr>
<tr>
<td>reportengine.msm</td>
<td>10'701'824 Byte</td>
<td>10'905'088 Byte</td>
</tr>
</table>
 
But I tried to install SP7 on my PC and on customers PC, but I got following error after I accepted the license agreement in the setup.exe: titlebar of window 'Information', Msg: 'Failed to create Backup folder -110' and just a button 'OK'. I got into an infinit loop and I could only end the process: 'IKernel.exe'. 
Remark: I get the same error with SP5 and SP6. 
 
 
 
5) Modules - comparison of DLL's 
 
I cross checked all the DLL in Modules, which begin with CR and some other, because there were over 100 DLL's. 
 
<table x:str border=0 cellpadding=0 cellspacing=0 width=834 style='border-collapse:
collapse;table-layout:fixed;width:626pt'>
<col width=385 style='mso-width-source:userset;mso-width-alt:14080;width:289pt'>
<col width=179 style='mso-width-source:userset;mso-width-alt:6546;width:134pt'>
<col width=110 style='mso-width-source:userset;mso-width-alt:4022;width:83pt'>
<col width=80 span=2 style='width:60pt'>
<tr height=17 style='height:12.75pt'>
<td height=17 width=385 style='height:12.75pt;width:289pt'>CRHEAPALLOC.DLL</td>
<td width=179 style='width:134pt'>9.2.0.2</td>
<td width=110 style='width:83pt'>9.2.0.2</td>
<td width=80 style='width:60pt'></td>
<td width=80 style='width:60pt'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>CRPE32.DLL</td>
<td>9.2.3.1183</td>
<td>9.2.3.1183</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>CRQE.DLL</td>
<td>9.2.1.625</td>
<td>9.2.1.625</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>CRTOWORDS_EN.DLL</td>
<td>9.2.0.14</td>
<td>9.2.0.14</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>CRYSTALDECISIONS.CRYSTALREPORTS.ENGINE.DLL</td>
<td>9.3.9500.10</td>
<td>9.3.9500.10</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>CRYSTALDECISIONS.REPORTAPPSERVER.CLIENTDOC.DLL</td>
<td>9.2.3300.0</td>
<td>9.2.3300.0</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>CRYSTALDECISIONS.REPORTSOURCE.DLL</td>
<td>9.3.9500.7</td>
<td>9.3.9500.7</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>CRYSTALDECISIONS.SHARED.DLL</td>
<td>9.3.9500.10</td>
<td>9.3.9500.10</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>CRYSTALDECISIONS.WINDOWS.FORMS.DLL</td>
<td>9.3.9500.12</td>
<td>9.3.9500.12</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>CRYSTALKEYCODELIB.DLL</td>
<td>9.2.3300.0</td>
<td>9.2.3300.0</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>keycode.dll</td>
<td>9.0.0.281</td>
<td>9.0.0.281</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>MSADCE.DLL</td>
<td>2.81.1135.0</td>
<td>2.81.1135.0</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>MSADCER.DLL</td>
<td>2.81.1117.0</td>
<td>2.81.1117.0</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>MSADO15.DLL</td>
<td>2.81.1128.0</td>
<td>2.81.1128.0</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>MSADRH15.DLL</td>
<td>2.81.1117.0</td>
<td>2.81.1117.0</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>MSCORLIB.DLL</td>
<td class=xl26>01/15/09 22:31:34</td>
<td class=xl26>7/7/08 13:39</td>
<td class=xl24></td>
<td class=xl25></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>sqlresld.dll</td>
<td>2000.80.382.0</td>
<td>2000.080.0382.00</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>crdb_ado.dll</td>
<td>9.2.1.542</td>
<td>9.2.1.542</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
</table>
 
Please specify the more detailed, if you mean the Crystal framework files or the .NET files. Could you give me please the location of the framework dlls and database client dlls like a folder name, so that I can check also all of them. 
 
I can provide you also the Module logger files, if you require them. 
 
 
I would appreciate your further help very much. 
 
Cheers 
 
Ronny
Edited by: Ronny S. on Jul 6, 2009 4:57 PM
Edited by: Ronny S. on Jul 6, 2009 5:02 PM
Edited by: Ronny S. on Jul 6, 2009 5:17 PM
Edited by: Ronny S. on Jul 8, 2009 11:44 AM
Edited by: David Hilton on Jul 15, 2009 11:04 AM
Removed private keycode.

Crystal reports templates path

Hi,
I have a question for Crystal reports template path with SAP Business One 2007A. Where can I find the report template path setting? So I can find those templates.
I worked on B1 2005 before, need some help for Crystal reports.
Thanks a lot.
Christina

Hi, Gordon
Nice to know you here. hehe, my "BenJia".
Yes, I found those templates files in the share folder. But I thought I can find the setting screen in B1, just like other path setting "Attachments Folder".
And, 2nd question, then. Can I open design window for Crystal reports from somewhere in B1? Or the only way to do it is to open Crystal reports software, then edit templates?
Thanks Gordon.
Regards
Christina
Edited by: Christina Du on Sep 7, 2010 2:35 AM

Drill Down Arrow error in Crystal Report. Authorization Path

Similar Messages

Maybe you are looking for