Drill down charts using javascript:$s fails in IE

Hello,
I am working on a drill down chart for a dashboard, where the chart needs to be repainted without page reload and hence have used javascript:$s in the query for setting an attribute to be passed to the subsequent chart.
Query is as follows:
select 'javascript:$s("APPFAM","'||d.short_name||'")' LINK, short_name,
sumapps from MVIEW_FYEAR_TODATE_TOTALS
Drill down works fine and the attribute is set as required in Firefox. The same query fails in IE 9 in my machine with the error "Internet Explorer has stopped working - Close the program" error. This query works fine in another machine on IE 9. Are there some browser settings that is hindering the javascript execution, because if i replace the 'javascript:$s("APPFAM","'||d.short_name||'")' with javascript:alert("hello") it still fails. I have tried setting/ resetting the javascript Internet options but it still throws the same error.
Thanks in advance for your help.

Hi,
You can't - that SP2 was for XI R2
if you are on XI 3.1 , then you patching options today are SP3 FP3.7 or SP4 FP4.1 i believe
Regards,
H

Similar Messages

Drill Down chart using a selector

Hi ,
Is it possible to use the drill down option with a selector? I have figured out dirll down and it's quite simple but I can't seem to get it to work when a selector is in use
Here is my requirement
At the top layer it should show the region data when I click on any one region it should provide me the Bar chart (drill down chart)without Industries data in that particular region
and also I have 2 filters as selector
one filter is labeled as forecast and contains the values Current , Past & the other should be the Year contains the values 2007, 2008, 2009
I have a Region Pie chart which should default show the values Forecast = All and Year = All
if I select the values from the forecast = Current & select the values from year = 2006 the pie chart should display the values according to the selection and even the bar chart(drill down chart) should display the values according to the selection
Please any one let me know how can I do this

Sirisha,
Emailed you the xlf file as per your requirement...
Sirisha's Requirement:
Ultimately what we want is to have a selector (combo box) which will have the choices: person A, person B and person C. Then when a person is chosen, say person A, a pie chart will display amounts for info X, Y and Z that pertain to person A. Likewise, if we chose person B with the selector (combo box), the chart would change to the corresponding info X,Y and Z for person B. Once we have a particular person's data up we would like to then drill down on a slice of the X,Y,Z pie and display the subcategories of information on a neighboring column chart. So, we have person A up, we then see their pie of X,Y and Z, now we click on the Z slice and we would like to see a chart with the detailed info for Z: Zsub1, Zsub2 and Zsub3.
-Anil

Drill Down Charts - Oracle Graphics

My understanding of drill down chart is when
you click on the particular chart element in the Master chart the Detail chart should show up.
But in my situation when I choose run from layout editor in oracle graphics, first the Master chart appears and then it automatically refreshes it with the Detail chart without user intervention. The Master
chart appears as a minimized window.
I am passing parameter between the Master chart and the detail chart.
Could anyone tell me how to solve this
and get the effect of drill down from
Master Chart to show up the Detail Chart Please ?
Thanks
Mohan

Hi Pradeep,
You can careate your own dirlldown chart reports like :
--Create a report using xtreem sample database
--Crate two groups like Country & Reagion and use Yearly sales in your charts
--Place a bar graph on your Country group footer and Region group footer.
--Use Hide(Drill Down Ok) option for region group footer and suppress all other empty sections.
--Now try to drill down through Country group to Region group.
You will have to go through only help documents on drill down options in Crystal.
You have to create a ODBC connection on server end also copy the xtreem database on your server to run you reports in infoview.
Yes Crystal Reports 2008 supports multi level drill down.
Thanks,
Sastry

Drill Down Charts Backed by JAVA

Hi,
I am from java background, but I had developed simple projects mostly CURD operations and just a simple chats using Spring Blazeds.
But now I want to develop dash board and drill down charts. I have seen some sample , where the data is an XML which is mapped to flex objects and drill down is done.
But what I know is just call a remote java method which returns a map or list which I get as a Array collection.
Is it possible to acehive drill down with such java return type or does java need to return results only in XML, so drill down can be easy at flex end.
what is the best way to do ?
Almost all the examples comes with an static xml file available for the application, It would be great if any one can tell how to drill down using a List returned by java or any example of drill down backed by java.
Thanks

You can try using the Data Centric Development (DCD) features of FB 4.0 and try using BlazeDS and LCDS workflows and bind the result to Flex Charts.
This can help http://sujitreddyg.wordpress.com/category/flex-and-lcds/
Thanks
-Sunil

Drill Down Menu and JavaScripts

I've create a Drill Down menu with JavaScripts and put it in Html Portlet when I try to run, It doesn't work.
But If I execute this code without use portal it works perfectly.
Example:
<script type="text/javascript" language="JavaScript1.2" src="stm31.js"></script>

<script type="text/javascript" language="JavaScript1.2">

</script>


You must write the complete path of you javascript librayry :
replace src="stm31.js" by something like src="http://myserver:myport/.../stm31.js"

How to call a drill down report using hyperlink ?

Can anyone please give an example to call a drill down report using hyper link in Reports 10g ?
Regards
Capri !!!

Hi,
I've been using this approach in a couple of reports and it works great with one problem. Even if I include the srw.set_hyperlink_attr('target=_new") it still launches the drill report in the current window. When the user hits the back button it doesn't take them back to the main report it takes them back to the reports/rwservlet? page. Can you see if there is anything I'm doing wrong...would be a really cool report if I could force it to open a new window.
Here is what my code looks like:
srw.set_hyperlink(:P_SERVER || 'dwn&report=transaction2_v8.rdf' ||
'&PARAM_COMP_NUM=1' || '&PARAM_ACTV1=' || TRIM(:actvty_cd) || '&PARAM_ACTV2=&PARAM_ACTV3=&PARAM_ACTV4=&PARAM_ACTV5=&PARAM_ACTV6=' ||
'&PARAM_START_DATE=&PARAM_END_DATE=' || '&PARAM_FY_NUM=' || vYear || '&PARAM_PERIOD=0' || '&PARAM_ACTVTY_GRP=%20' ||
'&PARAM_LIST=%20' || '&PARAM_START_ACCT_CAT=' || TRIM(vCat) || '&PARAM_END_ACCT_CAT=' || trim(vCat2)|| '&PARAM_SYS_CODE=%20' ||
'&PARAM_SRC_CODE=%20' || '&PARAM_DATA_TYPE_CD=P' || '&PARAM_ACT_STATUS=%20');
SRW.SET_TEXT_COLOR('blue');
srw.set_hyperlink_attrs('target=_new');
Also I get different behavior if the user saves the PDF and opens the report through their pdf reader.
Thanks for your help

Is it possible to open drill down chart in different window ?

Dear expert
Is it possible to open drill down chart in different window ?
Regards
imansyah

HI imansyah,
Can you try doing what you want in first instance and then try posting your problem you face.
Regards
Rana

Drill down charts Hierarchy in Pie Char not working need to instal Patch

Hi Folks,
We are Using Buisness Objects 3X version, Our Client Requirement is to drill down the Hierarchy thro Table and also he needs to see in Charts.
We dragged the Chart in the Report also, while we drilling down in the Table, it is working fine , and also chart is also woriking fine ,, when we drill up , chart giving Some Syntax problem,
When we searched this issue ,,SAP have given Patch to install in this link,,,
http://resources.businessobjects.com/support/communitycs/FilesAndUpdates/boXIr2_sp2_readme.pdf
ADAPT00607580 Patch ID: 38,912,657
Description:
In Java or .NET InfoView, when drilling on a chart in a Web Intelligence report in Edit mode, the report fails to display sublevel
information.
In View mode, the drilling feature works properly.
How to install the Patch , where we can download the Patch ............................Share your knowledge regarding this ., to solve the issue.......................

Hi,
You can't - that SP2 was for XI R2
if you are on XI 3.1 , then you patching options today are SP3 FP3.7 or SP4 FP4.1 i believe
Regards,
H

HGrid with drill down & chart

Hello folks, I've a requirement, kinda hard and I would like to know some guide lines with my first OAF customzied page.
The requirement is a page that includes the Organization Hierarchy from the top most to the to bottom including managers and with a drill down option for each department and manager. Another thing is a report issue, which is a competency/appraisal chart grouped for a specific department/supervisor or the whole organization.
At first, I thought of a graphTable bean under the HGrid that will be implemented with PPR option to refresh each time a selection happens in the HGrid. Then I've found a way to include BI Publisher reports withing an OAF Page in real-time. I almost have gathered the information to be used but the main problem is, I don't know from where to start!.
Please advise.

glad to hear we were on the right track. chapter 12 of the htmldb documentation provides info on some of the api's that htmldb makes available to you for use in your application. of those api's, htmldb_util, has a url_encode function. it encodes special characters and such into hex so you can call them via a url. because of the weirdness you described it seemed as if you could use some encoding your svg chart links, too. so instead of coding your select statement as...
select 'f?p='|| :APP_ID ||':2:'|| :APP_SESSION ||'::::P600_SHOW:'||remarks link, remarks label , count(remarks) value from whatever
...i was suggesting you write it as...
select 'f?p='|| :APP_ID ||':2:'|| :APP_SESSION ||'::::P600_SHOW:'||htmldb_util.url_encode(remarks) link, remarks label , count(remarks) value from whatever
...hope this helps,
raj

Drill down reports using SVG component

I've created and dynamic report and an SVG chart following the examples of the tutorials. I was wondering if, and how, it was possible to create drill-down reports i.e report on colour, then clicking on that colour would reveal the types of car and so on. Does anyone have an example?
Thanks
Darren

Darren,
The query for an SVG chart requires 3 columns: Link, Label, and Value. You use the Link value to provide a link to another page. This link can also pass parameters to the next page.
If you set up a page for each "level" of your drill-down (e.g. color, type of car, etc), you can link from the higher-level page to the lower level page and pass the value that was clicked on in the chart.
Take a look in the HTML DB User's Guide for the section about "Using f?p Syntax to Link Pages": http://download-west.oracle.com/docs/cd/B14117_01/appdev.101/b10992/mvl_fund.htm#BEIJCIAG
You would use that syntax in the Link column of the query for your chart. Here is part of a query I used to drill down from one pie char to another (on page 3), passing the selected project to a variable called P3_PROJECT.
select 'f?p=&APP_ID.:3:&SESSION.::NO::P3_PROJECT:' || Project L,
Project, sum(Time)
from v_timesheet
where ...
Does that help?

Passing the filter values to drill down chart

Hi all,
I want to drill down on a chart on the basis of fitlter values. i.e User wants to click on the section of first chart and want to pass on the filter values of first chart to the second chart...How should I achieve this in Xcelcius???

You can do this using the Drill Down tab in the properties of the chart.
Click on Chart goto Properties --> Drill Down --> (Check Box) Enable Drill down
-Anil

How to reset the value of drill down - Chart

Hi gurus. I have a problem related with drilldown.
is there any way I can reset the drill down value?,of course, except for using reset button
(in this case "reset" means "make the cell blank of certain value")
I tried using "push button" and the cell is reset.
However, even though the cell is reset, the cell is set to the drill down value in one second.
ex. Drill down destination : a --> "" --> a
(a is drill down value)
Is there a way to reset the drilldown value?
Thanks in advance.

Thanks for your help , Sonja
I used push button but it can not refresh(reset) drill down cell
because the destination cell of the chart remains drill down value
I tried like below way
a : drill down value
Goal : make drill down cell turn to blank after i used drill down once.
1ST.
when i click the chart and use drii down, a is entered into drill down cell
2ND
by using "push button", i tried to reset drill down cell
but unfortunately it does not work.
Although drill down cell changes instantly to blank after just one second, it changes to a, drill down value
drill down cell changes like this
1 -> 2 -> 3
a -> blank -> a
i have to eliminate (2->3) phase or find another way to refresh drill down cell.
Regards
Kwon

Drill Down Charts - Please Help

I am on version 4.0.1.00.03 and I have a flash chart stacked 3d colum that is displaying a yearly count by category of issues. The page also includes an item as a select list that allows you to choose the year you'd like to see. This works great. I can change the year and the chart changes correctly. Now when I go to drill down on a specific category to show the monthly count for the given category selected. I can't get the chart to show up as the year isn't coming in the url as expected. The category id does appear. I've tried everything I can think of but can not seem to get this. Any assistance would be greatly appreciated! :)
f?p=111:57:3034438413069645::NO:RP:P57_YEAR,P57_CATEGORY_ID:%26P57_YEAR,141

Hi "790176" (please update your profile with a name, thanks),
Based upon the LINK you have provided, it would appear that you are referencing the select list item as &P57_YEAR. If you reference your item as :P57_YEAR instead, and concatenate its value to the URL, then your drill-down link should work. Your LINK column in the first chart query should look something similar to the following:
SELECT 'f?p=111:57:&SESSION.::NO:RP:P57_YEAR,P57_CATEGORY_ID:'||:P57_YEAR||',14' LINK, ....You may find it useful to refer to one of my map samples - http://apex.oracle.com/pls/apex/f?p=36648:33 - where clicking on a map section will drill down to a report. It's the same concept as linking down to another chart, you just need to have a correctly formatted URL. I hope this helps.
Regards,
Hilary

Drill down chart help mee

Hi....
Can anyone explain to me, how works the chart drill down sintax, I not understand for example:
SELECT 'f?p=&APP_ID.:156:&SESSION.:GET_DETAIL_REPORT:NO::P156_DEPTNO:' <=====what is it?? is an item?? and what is inside of this?
|| deptno LINK,
deptno, COUNT (empno)
FROM emp
GROUP BY 'f?p=&APP_ID.:156:&SESSION.:GET_DETAIL_REPORT:NO::P156_DEPTNO:'
|| deptno,
deptno
And you know the GET_DETAIL_REPORT???
THANK YOU SO MUCH
Claudia

Claudia,
In your number 4, P156_DEPTNO, you say is an item...
but is an item hidden??? And if so then is a sql
query??That's an item defined on the detail report that your link will jump to. You have to define that detail report first, including creating an item on that page that you'll use to pass the parameter. You also have to edit your detail report's query to use that item.
Check out the example code for a Master-Detail report in the 2-Day Developer Tutorial, including moving your mouse over the link from the master edit button to see the syntax. The chart is doing the same thing.
Good luck,
Stew
My Oracle Community blog:
http://www.oraclecommunity.net/profiles/blog/list?user=stewstryker

Drill Down Report using Crystal reports in eclipse and jspviewer

Hi
I want to understand how to write a drill down report since I have a requirement for my project, so I tried to run the sample drill down.rpt that is available with Crystal Reports 2008 Complete Reference book by George Peck.
I can see the results correctly( i.e. can drill down) in the preview tab . Since I am working inside the eclipse, the way I run the reports is first "Create report viewer JSP" by right clicking the report and have a url mapping to this jsp. I am running the reports from a hyperlink that maps to the url which will launch the jsp.
the jsp is:-
<%@ page contentType="text/html; charset=UTF-8" pageEncoding="ISO-8859-1" %><%@ taglib uri="/crystal-tags-reportviewer.tld" prefix="crviewer" %><crviewer:viewer reportSourceType="reportingComponent" viewerName="Drill Down-viewer" reportSourceVar="Drill Down" isOwnPage="true" allowDrillDown="true">
     <crviewer:report reportName="reports/Drill Down.rpt" />
</crviewer:viewer>
The one that was created by "Create report viewer JSP" did not had "allowDrillDown" attribute at all .But I added it since it isnt working.
So when I launch my web app and click on the link to run the report, I get the report results but only to the summary level. When I double click the summary level I get a 404 error page.
Can please anyone suggest what is going on.
Thanks
poonam

Ok. So, you added the report to the project. Now we have to add the CR assemblies to the project, add the viewer (if need be) and fire it off. Simplest code would be:
Public Sub New()
        ' This call is required by the designer.
        InitializeComponent()
        ' Add any initialization after the InitializeComponent() call.
        CrystalReportViewer1.ReportSource = ("path to report")
    End Sub
In this case you are using the viewer SDK to runt he report. The report will prompt for any logon parameters - but you can code these also. You can load the report via the engine as bellow. Again, the report will prompt. I prefer to use the engine as it is way more "extensible"...
Public Sub New()
        ' This call is required by the designer.
        InitializeComponent()
        ' Add any initialization after the InitializeComponent() call.
        Dim crReportDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument()
        crReportDocument.Load("path to report")
        'Bind the report to the viewer
        CrystalReportViewer1.ReportSource = crReportDocument
    End Sub
If you have a report added to the project (strongly typed) the code would be:
CrystalReportViewer1.ReportSource = New myReport()
For more details, I'd recommend looking at the sample app vbnet_win_simplepreviewreport.zip available from the following location:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
The developer help files are here:
[SAP Crystal Reports .NET SDK Developer Guide|http://help.sap.com/businessobject/product_guides/sapCRVS2010/en/crnet_dg_2010_en.zip]
[SAP Crystal Reports .NET API Guide|http://help.sap.com/businessobject/product_guides/sapCRVS2010/en/crnet_api_2010_en.zip]
- Ludek

Drill down charts using javascript:$s fails in IE

Similar Messages

Maybe you are looking for