Drill Down for multiple tables possible?

Hi,
I have a web report with 3 tabs (Weekly, Monthly, and Quarterly) sales reports.
Is there a way to have a user drill down on any one of the reports and have it also affect/drill down on the remaining reports? I can get the functionality to work if the 3 tables are not in tabs.

are you using 7.0 or 3.x. I guess in 7.0 the Command is not executed against an invisible object. May you can try to to create a command sequence Show the items perfom drill down, and hide items.
best regards,
Kai

Similar Messages

Drill Down for Multiple Series in a Line Chart

Hello,
I seem to have a problem with the drill-down functionality in a line chart that has multiple series.
I have a line chart that displays the readings of a patient over a period of 1 month. For each day, there is the glucose level reading, blood pressure reading, etc... So, each reading is a different series in my line chart graph.
The basic requirement is: With a mouse over event on the chart, I am willing to display all the data that belongs to that day. The data will be displayed at the bottom of the screen in a small panel. It is very simple to do it when the line chart has only 1 series:
i) Enable drill down.
ii) Choose 'Row' as insertion type.
iii) Fill out the destination field.
iv) Make sure your labels (at the bottom of the screen) get the data from the destination cell.
When there is more than one series, it becomes very difficult. XCelsius will not let me use the same destination cells for different series. So, I will have to use other destination cells. In that case, I will not know on which day is the user on. Is there any way to achieve this functionality?
Let me know if you need further information.

This is certainly possible, but there's a bit of a trick to it (and really hard to explain without screenshots!). There's two halves to it:
1. Write the date that has been selected to a cell (for each series).
2. Write the name of the series that was clicked to some cell (this is the property 'Series Name Destination').
So let's say your three series are Glucose, Blood Pressure and Temp. Have those series names in B1,C1,D1 (with your dates down in column A). Insert a row below the series names (2:2), and then set up your insertion type for the chart as 'row'. The source data (for all three series) should be your list of dates in column a. The insertion cells for the three series will be, in order, B2,C2,D2. Now, depending on which point is clicked in the chart, the selected day will be inserted into one of those three cells. Completely useless unless you know which series was clicked.
So you need to insert the name of the series that was clicked ('Series Name Destination') into the spreadsheet, let's say in F1. The rest is just Excel formulas. The logic is, you can now tell what series was clicked, and go and look up the date that was inserted for that series, then go and look up the row that corresponds to that date. So to get the date that was just clicked, your formula (in F2) would be =HLOOKUP(F1,B1:D2,2,0).
Then a VLOOKUP will get the results from that row of data. For example, if I inserted another row at row 3 (to show my 'result' values) the formula in B3 would be =VLOOKUP($F$2,$A$4:$D$13,2,0).
I hope that makes sense.

Drill-down to multiple columns at same time

Hello,
Is it possible to simultaneously drill down to multiple columns on the same level with one click? I have several attributes that the user will want to see together at all times, so I want to be able to drill from level1 to level2a,2b, and 2c with one click.
Thanks,
Elliot

This drilling down to all the levels may not be available with the OBIEE drill level based hierarchy feature OOTB but as an alternative you can try this at you DB level to create a hierarchy within you data using START WITH and CONNECT BY PRIOR to generate the parent->child levels hierarchy within the view instead of creating multiple hierarchical columns.
Or may be you can try to create separate columns in a table for each hierarchy level. That table could either be in the database or be a logical one in the repository. For example:
Level 1 Level 2 Level 3 Description
1 2A 3A
1 2A 3B
1 2B 3A
1 2B 3B
etc
You then create separate reports for each level, so one report has only level1 in it for this dimension, another report has levels 1 an 2 and a third report has levels 1, 2 and 3 etc.
In each report you put an action link on the levels' cells so that if you click on them you drill up or down by displaying a new report with either less or more level columns.
Hope this helps. Pls mark if it does.
Thanks,
SVS

Can we use single DB Adapter for multiple tables

Hi,
I have 3 tables. ONE is the Master table and other 2 tables having Primary and foreign key relationships with the Master Table.
Data is enter in the Tables 2 & 3 (based on Master Table Primary key)
I have to use a DB Adapter in BPEL Process which will be in Transaction (what type of Transaction is Best in such a Scenario).
- How do i implement it in BPEL.
- Can i use a Single DB Adapter for Multiple Tables ? (*Views* should not be created for tables 1, 2 & 3),
as we want to avoid using multiple DB Adapters, as in future Tables may increase or decrease...
- while in Transaction if Table 2 fails in Inserting / Updating, it should roll back on error and also if Table 3 fails in Inserting / Updating, it should roll back table 2 and Table 3.
- how access to concurrent users is maintained / managed in such a scenarios.
But everything should be done using Single DB Adapter without creating a separate view.
Is this Possible in BPEL..
If not, How do we design, Implementation such a BPEL Process in Transaction with a best in Performance (both BPEL Process & DB Resources)
thanks in advance
thanks & regards,
anvv sharma

Hi,
Thanks for your quick response.
I have few quires.
If we use PL/SQL, how do we implement transaction and Exception Handling appropriately based on the Error / Exception in BPEL.
If the Table 2 or Table 3 gives out Error / Exception, i have to handle it separately and intimate accordingly.
Suppose, if Table 2 got Error / Exception - Error Handling would be 'Roll back due to error in Table2'
Thanks & regads,

User Datastore for multiple tables and columns!

Hi,
I hop so much, someone can help me.
I've made a user datastore to index multiple columns of multiple tables.
Now, the Documentation of Oracle explains the idexing of one table.
I have multiple tables, which have all, the columns descr and tagnr. I want to make a query sth like this:
select table1.column, table2.columnd... where contains(indexed field,'gas within descr',1)>0
is it possible to index 4 seperate tables, without having a collective key? I dont want to make a Concatenated Datastore.
I have wrote this code.
But it doesn't work. It's been compiled fine. But I don't get any result with my queries.
create or replace
procedure My_Proc_Wide
Must be in ctxsys schema.
In a full-scale example, this would be a wrapper
for a proc in the user schema.
rid in rowid,
tlob in out NOCOPY clob /* NOCOPY instructs Oracle to pass
this argument as fast as possible */
is
v_descr varchar2(80);
v_tagnr varchar2(30);
v_descr_name constant varchar2(20) := 'descr';
v_descr_start_tag constant varchar2(20) := '<' || v_descr_name || '>';
v_descr_end_tag constant varchar2(20) := '</' || v_descr_name || '>';
v_tagnr_name constant varchar2(20) := 'tagnr';
v_tagnr_start_tag constant varchar2(20) := '<' || v_tagnr_name || '>';
v_tagnr_end_tag constant varchar2(20) := '</' || v_tagnr_name || '>';
v_buffer varchar2(4000);
v_length integer;
begin
/* verify the env which called this */
if Dbms_Lob.Istemporary ( tlob ) <> 1
then
raise_application_error ( -20000,
'"IN OUT" tlob isn''t temporary' );
end if;
/* the real logic */
/* first tabel to be indexed */
select t1.tagnr, t1.descr
into v_tagnr, v_descr
from tweb.pdp_positions t1
where t1.rowid = rid;
v_buffer := v_tagnr_start_tag ||
v_tagnr ||
v_tagnr_end_tag ||
v_descr_start_tag ||
     v_descr ||
     v_descr_end_tag;
v_length := length ( v_buffer );
Dbms_Lob.WriteAppend(tlob, length(v_buffer) + 1, v_buffer || ' ');
/* second table to be indexed */
select t2.tagnr, t2.descr
into v_tagnr, v_descr
from tweb.pdp_schema_equ t2
where t2.rowid = rid;
     v_buffer := v_tagnr_start_tag ||
v_tagnr ||
v_tagnr_end_tag ||
v_descr_start_tag ||
     v_descr ||
     v_descr_end_tag;
v_length := length ( v_buffer );
Dbms_Lob.WriteAppend(tlob, length(v_buffer) + 1, v_buffer || ' ');
/*third table to be indexed */
select t3.tagnr, t3.descr
into v_tagnr, v_descr
from tweb.pdp_equipment t3
where t3.rowid = rid;
     v_buffer := v_tagnr_start_tag ||
v_tagnr ||
v_tagnr_end_tag ||
v_descr_start_tag ||
     v_descr ||
     v_descr_end_tag;
v_length := length ( v_buffer );
Dbms_Lob.WriteAppend(tlob, length(v_buffer) + 1, v_buffer || ' ');
/* fourth table to be indexed */
select t4.tagnr, t4.descr
into v_tagnr, v_descr
from tweb.pdp_Projcode t4
where t4.rowid = rid;
     v_buffer := v_tagnr_start_tag ||
v_tagnr ||
v_tagnr_end_tag ||
v_descr_start_tag ||
     v_descr ||
     v_descr_end_tag;
v_length := length ( v_buffer );
Dbms_Lob.WriteAppend(tlob, length(v_buffer) + 1, v_buffer || ' ');
end My_Proc_Wide;
what have I to do, to make this work?
Any Help would be appriciated!!
Kind Regards,
Arsineh

Arsineh,
I realise that it has been quite some time since you posted this question but I thought I'd reply just in case you never did manage to get your user datastore working.
The reason your procedure will not work is simple. A user datastore procedure accepts a rowid input parameter. The rowid is the ID of the row that Oracle Text is currently trying to index. In the example you have given, you are attempting to use the supplied rowid as the primary key for multiple tables, this will simply never work as the rowid's across multiple tables will never correspond.
The best way to achieve your goal is to create the index on a master table which contains the common primary keys for each of your four tables e.g.
MASTER_TABLE
COL:COMMON_KEY (NUMBER(n))
COL:USER_INDEX_COLUMN (VARCHAR2(1))
If you create the user datastore index on the MASTER_TABLE.USER_UNDEX_COLUMN column your stored proc simply needs to read the correct row from the MASTER_TABLE (SELECT t.common_key into v_CommonKey FROM master_table t WHERE t.rowid = rid) and issue subsequent queries to extract the relavant data from the t1..t4 tables using the common key e.g.
SELECT t1.tagnr, t1.descr into v_tagnr, v_descr FROM t1 WHERE t1.[PRIMARY_KEY_FIELD] = v_CommonKey;
SELECT t2.tagnr, t2.descr into v_tagnr, v_descr FROM t2 WHERE t2.[PRIMARY_KEY_FIELD] = v_CommonKey;
and so on...
Hope this helps
Dean

Drill down for infotypes

Hi,
I made a select-option for the field PA0290-PASSL,
but, but i noticed that i couldn't drill down to the table contents of the pa0290-passl. I thought maybe it has something to do with the table being an infotype. Because the select-option works fine for transparent tables like MARA. Are there any way for me to make a drill down for an infotype table such as the one i mentioned above?
Thanks,
Frank

Hi,
You can use the following code for providing F4help.
types: begin of ty_PASSL,
PASSL type PA0290-PASSL,
end of ty_passl.
data: i_passl type table of ty_passl.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR PASSL.
Select PASSL from PA0290 into table i_PASSL where .....
w_repid = sy-repid.
w_dynnr = sy-dynnr.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'PASSL'
dynpprog = w_repid
dynpnr = w_dynnr
dynprofield = 'PASSL'
value_org = 'S'
TABLES
value_tab = i_PASSL.
IF sy-subrc 0.
ENDIF.
Reward points if helpful.
Thanks and Regards.

IDA ALV - different behavior regarding "drill-down" for grouped attributes after upgrade to ERP 6.0 EHP7 SPS5

Hello Experts,
we have upgraded our Dev System to ERP 6.0 EHP 7 SPS5 (coming from SPS4).
We had implement an example with an IDA ALV. On SPS4 we could make a "drill-down" to the single lines of grouped attributes. Now with SPS5 this is not possible anymore if the grouping is done for more than one attribute.
On the following screenshot it scan be seen that the grouping is done over a Peril attribute and the Currency. I can only make a drill-down via the peril attribute, so that the aggregated values per currency are displayed. ON SPS4 it was possible to make a further drill-down for the currency attribute, so that the different single lines were visible which were part of the grouping/aggregation.
SPS5 behavior:
SPS4 behavior:
I did not found any new settings which steers the behavior. Also I did not found any note which gives a hint that this is a bug.
Does anyone know if the behavior for that was changed and why?
Thx & Best regards,
Florian

Hi Florian,
it is related with the currency field and it seems to be a bug. Please open a ticket to get the problem fixed. The component is BC-WD-CMP-ALV.
Cheers
Jens

[ADF Help] How to create a view for multiple tables

Hi,
I am using Jdeveloper 11G and ADF framework, and trying to create a view to update multiple tables.
ex:
Table A has these fields: ID, Name
Table B has these fields: ID, Address
A.ID and B.ID are primary keys.
B.ID has FK relationship with A.ID
(basically, these tables have one-to-one relation)
I want to create a view object, which contains these fields: B.ID (or A.ID), A.Name, B.Address.
So I can execute C,R,U,D for both tables.
I create these tables in DB, and create entity objects for these tables.
So there are 2 entity objects and 1 association.
Then I create a view object based on B and add fields of A into the view:
If the association is not a "Composition Association",
when I run the model ("Oracle Business Component Browser") and try to insert new data, fields of A can't edit.
If the association is a "Composition Association", and click the insert button, I will get
"oracle.jbo.InvalidOwnerException: JBO-25030: Failed to find or invalidate owning entity"
If I create a view object based on A and add filed of B into the view:
When I run the model and try to insert new data, fields of B can't edit, no matter the association is or is not a composition association.
So... how can I create a view for multiple tables correctly?
Thanks for any advices!
Here are some pictures about my problem, if there is any unclear point, please let me know.
http://leonjava.blogspot.com/2009_10_01_archive.html
(A is Prod, B is CpuSocket)
Edited by: user8093176 on Oct 25, 2009 12:29 AM

Hi Branislav,
Thanks, but the result is same ....
In the step 2 of creating view object, I can select entity objects to be added in to the view.
If I select A first, and then select B (the "Source Usage" of B is A), then finishing the wizards.
When I try to create a new record in the view, I can't edit any properties of B (those files are disabled).
If I select B first, and then select A in crating view object, the result is similar ...
Thanks for any further suggestion.
Leon

Unable to Drill Down for Report Designer

hellooo...I created a report using a query in Report Designer. My query is having a structure in the row and I'm using this query for the report in Report Designer. After I created this report in Report Designer, I assign this report in Web Application Designer and create a navigation pane to link this report for the drill down function. But I have problem on drill down this report in the web template when i click on this navigation pane for the free char i defined. Eg: when i drill down for the char in the free char under the navigation pane item, I cannot perform the drill down horizontally but can perform drill down vertically. After perform drill down, I don't see the values from that char being displayed in the reports. Just wondering report in report designer cannot have any drill down function? or is my query problem due to the structure i defined? thanks alotttt...

The report designer needs a fixed Column definition ( structures)
In case of drill across this requirement is not fullfilled.
This is not changable and is due to design, sorry.
so you can only drill down.
best regards,
Kai

Not able to set values in drop down for a table field

Hi All,
I am not able to set values in drop down for a table field. Although I am able to set these values to a stand alone field but its not happening for a particular table field. I am using ABAP web dynpro for coding.
Pls help.
Regards,
Bhaskar

Hi Otto,
Here is the code I am using:
* navigate from <CONTEXT> to <DATASOURCE> via lead selection
lo_nd_datasource = wd_context->get_child_node( name = wd_this->wdctx_datasource ).
* navigate from <DATASOURCE> to <CHANGING_PARAM> via lead selection
lo_nd_changing_param = lo_nd_datasource->get_child_node( name = wd_this->wdctx_changing_param ).
* navigate from <CHANGING_PARAM> to <EDUCATION_TAB> via lead selection
lo_nd_education_tab = lo_nd_changing_param->get_child_node( name = wd_this->wdctx_education_tab ).
node_info = lo_nd_education_tab->get_node_info( ).
REFRESH ddlb_value_set.
DATA: wa_edu_est TYPE t517t.
SELECT * FROM t517t INTO wa_edu_est WHERE sprsL = 'EN'.
    s_element-text = wa_edu_est-stext.
    s_element-value = wa_edu_est-slart.
    APPEND s_element TO ddlb_value_set.
ENDSELECT.
SORT ddlb_value_set BY text.
*    Set Value_sets to node_info
node_info->set_attribute_value_set(
     name      = 'EDU_EST'
     value_set = ddlb_value_set ).
Regards,
Bhaskar

Plsql coding for multiplication table

hai i need plsql coding for multiplication table can any one plzzzz.....

SELECT AVBELN AFKDAT AVTWEG ASPART AWAERK AKURRF AKUNAG AKNUMV
         BPOSNR BFKIMG BNETWR BMATNR
         DBEGRU ELABOR E~MATKL
         INTO CORRESPONDING FIELDS OF TABLE ITAB
         FROM VBRK AS A INNER JOIN VBRP AS B
              ON AVBELN EQ BVBELN
         INNER JOIN J_1IEXCHDR AS C
              ON AVBELN EQ CRDOC
         INNER JOIN KNVV AS D
              ON DKUNNR EQ AKUNAG AND
                 DVKORG EQ AVKORG AND
                 DSPART EQ ASPART AND
                 D~BEGRU NE SPACE
         INNER JOIN MARA AS E
              ON EMATNR EQ BMATNR
         WHERE A~FKDAT IN S_FKDAT AND
               A~FKART EQ 'F2'    AND
               A~VTWEG IN S_VTWEG AND
               A~SPART IN S_SPART AND
               A~KUNAG IN S_KUNAG AND
               A~FKSTO NE 'X'     AND
               B~WERKS IN S_WERKS AND
               C~TRNTYP = 'DLFC' AND
               E~LABOR IN S_LABOR AND
            C~SRGRP IN ('01','02','03','31','32','33','41','42','43',
                        '81','82','83','95','55','45', '48') AND
               B~MATNR IN S_MATNR AND
               D~BEGRU IN S_BEGRU AND
               E~MATKL IN S_MATKL.
but my suggestion not to use more than 2 table in inner join it will affect in performance use for all entries instead of join.
regards
shiba dutta

Sample coding for multiple table join

Hi,
i need a sample coding for multiple table join. can anyone help me out.
regards
Gokul

SELECT AVBELN AFKDAT AVTWEG ASPART AWAERK AKURRF AKUNAG AKNUMV
         BPOSNR BFKIMG BNETWR BMATNR
         DBEGRU ELABOR E~MATKL
         INTO CORRESPONDING FIELDS OF TABLE ITAB
         FROM VBRK AS A INNER JOIN VBRP AS B
              ON AVBELN EQ BVBELN
         INNER JOIN J_1IEXCHDR AS C
              ON AVBELN EQ CRDOC
         INNER JOIN KNVV AS D
              ON DKUNNR EQ AKUNAG AND
                 DVKORG EQ AVKORG AND
                 DSPART EQ ASPART AND
                 D~BEGRU NE SPACE
         INNER JOIN MARA AS E
              ON EMATNR EQ BMATNR
         WHERE A~FKDAT IN S_FKDAT AND
               A~FKART EQ 'F2'    AND
               A~VTWEG IN S_VTWEG AND
               A~SPART IN S_SPART AND
               A~KUNAG IN S_KUNAG AND
               A~FKSTO NE 'X'     AND
               B~WERKS IN S_WERKS AND
               C~TRNTYP = 'DLFC' AND
               E~LABOR IN S_LABOR AND
            C~SRGRP IN ('01','02','03','31','32','33','41','42','43',
                        '81','82','83','95','55','45', '48') AND
               B~MATNR IN S_MATNR AND
               D~BEGRU IN S_BEGRU AND
               E~MATKL IN S_MATKL.
but my suggestion not to use more than 2 table in inner join it will affect in performance use for all entries instead of join.
regards
shiba dutta

Drill down to Multiple Levels for Subtasks in Gantt Chart

Hello,
I need to use a Gantt Chart in one of my screens. I have constructed the required data model by using VO and corresponding view links. The issue is that I am not able to drill down to the last level in a Gantt Chart. I am able to drill down to only the second level. Any help appreciated.
Thanks & Regards
Sandeep

Any response to this question? Out team has similar requirement.

Scheduled Job to gather stats for multiple tables - Oracle 11.2.0.1.0

Hi,
My Oracle DB Version is:
BANNER Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
In our application, we have users uploading files resulting in insert of records into a table. file could contain records ranging from 10000 to 1 million records.
I have written a procedure to bulk insert these records into this table using limit clause. After the insert, i noticed my queries run slow against these tables if huge files are uploaded simultaneously. After gathering stats, the cost reduces and the queries executed faster.
We have 2 such tables which grow based on user file uploads. I would like to schedule a job to gather stats during a non peak hour apart from the nightly automated oracle job for these two tables.
Is there a better way to do this?
I plan to execute the below procedure as a scheduled job using DBMS_SCHEDULER.
--Procedure
create or replace
PROCEDURE p_manual_gather_table_stats AS
TYPE ttab
IS
    TABLE OF VARCHAR2(30) INDEX BY PLS_INTEGER;
    ltab ttab;
BEGIN
    ltab(1) := 'TAB1';
    ltab(2) := 'TAB2';
    FOR i IN ltab.first .. ltab.last
    LOOP
        dbms_stats.gather_table_stats(ownname => USER, tabname => ltab(i) , estimate_percent => dbms_stats.auto_sample_size,
        method_opt => 'for all indexed columns size auto', degree =>
        dbms_stats.auto_degree ,CASCADE => TRUE );
    END LOOP;
END p_manual_gather_table_stats;
--Scheduled Job
BEGIN
    -- Job defined entirely by the CREATE JOB procedure.
    DBMS_SCHEDULER.create_job ( job_name => 'MANUAL_GATHER_TABLE_STATS',
    job_type => 'PLSQL_BLOCK',
    job_action => 'BEGIN p_manual_gather_table_stats; END;',
    start_date => SYSTIMESTAMP,
    repeat_interval => 'FREQ=DAILY; BYHOUR=12;BYMINUTE=45;BYSECOND=0',
    end_date => NULL,
    enabled => TRUE,
    comments => 'Job to manually gather stats for tables: TAB1,TAB2. Runs at 12:45 Daily.');
END;Thanks,
Somiya

The question was, is there a better way, and you partly answered it.
Somiya, you have to be sure the queries have appropriate statistics when the queries are being run. In addition, if the queries are being run while data is being loaded, that is going to slow things down regardless, for several possible reasons, such as resource contention, inappropriate statistics, and having to maintain a read consistent view for each query.
The default collection job decides for each table based on changes it perceives in the data. You probably don't want the default collection job to deal with those tables. You probably do want to do what Dan suggested with the statistics. But it's hard to tell from your description. Is the data volume and distribution volatile? You surely want representative statistics available when each query is started. You may want to use all the plan stability features available to tell the optimizer to do the right thing (see for example http://jonathanlewis.wordpress.com/2011/01/12/fake-baselines/ ). You may want to just give up and use dynamic sampling, I don't know, entire books, blogs and papers have been written on the subject. It's sufficiently advanced technology to appear as magic.

How to send right CallingNumber when Cisco CER is down for multiple sites

Hi,
Cisco ER 7.x system with centerized CUCM 7.1(x) cluster for multiple sites over WAN, where each site has local voice gateway (MGCP) with T1/PRI connected. All the phones are DIDs.
When considering 911 calls redundancy when CER is down, Cisco ER administration guide recommends using Local Route Group for 10911 or something else route-pattern on CUCM which is used:
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cer/7_1_1/english/administration/guide/e911plan.html#wp1062106
To configure LRG, follow these steps:
1. On Cisco Unified Communications Manager Administration, configure the LRG route pattern and route point for 911 emergency call routing.
2. On Cisco Unified Communications Manager Administration, configure any destination route point that is being forwarded in the emergency call route point with the LRG route pattern.
3. On Cisco ER Administration, configure the LRG route pattern as the default ERL.
My question is:
On the 10911 route-pattern using LRG, how can configure the each site ELIN number as the calling number on the route-pattern which is normally assigned on E911 partition only? or do I need change MGCP to H.323 in order to achieve this purpose?
Do I miss something?
Thanks,
JJ

Hi,
I am not sure with in obiee it is possible? But third party tool we can do it.
Site scope monitor tool is there, what this tool will do it will send the alert mail to respective team whenever services are down.
For more information google it? You can get better idea.
Thanks,
Satya

Drill Down for multiple tables possible?

Similar Messages

Maybe you are looking for