Drill down for notes
Post Author: jhopewell
CA Forum: Xcelsius and Live Office
I am trying to figure out if there is a way to enable a drilldown that will allow people to see notes related to an individual item within a chart. i.e. a bar chart where you could click on an individual bar and pull up notes related to that particular item. I'm not having any luck figuring it out on my own. Does anyone out there know if this possible? Many thanks!
Post Author: amr_foci
CA Forum: Xcelsius and Live Office
you can do it in crystal xcelsius bar charts
just go to the properties and u will find something called drilldown
this option will insert the values of all serieses when you click on click on some column on the chart, you can take all those values and handle it
Similar Messages
-
Drill down report not working in 1og report
hi all,
Drill down report not working in 1og.
in 6i it working good but 10g not working .
plz help any one.
thanksHello,
For detailled instructions about hyperlinks :
Oracle® Reports Building Reports
10g Release 2 (10.1.2)
B13895-01
3.6.10.1.8 Creating a hyperlink using the Property Inspector
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b13895/orbr_howto.htm#i1062802
Regards -
Unable to Drill Down for Report Designer
hellooo...I created a report using a query in Report Designer. My query is having a structure in the row and I'm using this query for the report in Report Designer. After I created this report in Report Designer, I assign this report in Web Application Designer and create a navigation pane to link this report for the drill down function. But I have problem on drill down this report in the web template when i click on this navigation pane for the free char i defined. Eg: when i drill down for the char in the free char under the navigation pane item, I cannot perform the drill down horizontally but can perform drill down vertically. After perform drill down, I don't see the values from that char being displayed in the reports. Just wondering report in report designer cannot have any drill down function? or is my query problem due to the structure i defined? thanks alotttt...
The report designer needs a fixed Column definition ( structures)
In case of drill across this requirement is not fullfilled.
This is not changable and is due to design, sorry.
so you can only drill down.
best regards,
Kai -
Hello Experts,
we have upgraded our Dev System to ERP 6.0 EHP 7 SPS5 (coming from SPS4).
We had implement an example with an IDA ALV. On SPS4 we could make a "drill-down" to the single lines of grouped attributes. Now with SPS5 this is not possible anymore if the grouping is done for more than one attribute.
On the following screenshot it scan be seen that the grouping is done over a Peril attribute and the Currency. I can only make a drill-down via the peril attribute, so that the aggregated values per currency are displayed. ON SPS4 it was possible to make a further drill-down for the currency attribute, so that the different single lines were visible which were part of the grouping/aggregation.
SPS5 behavior:
SPS4 behavior:
I did not found any new settings which steers the behavior. Also I did not found any note which gives a hint that this is a bug.
Does anyone know if the behavior for that was changed and why?
Thx & Best regards,
FlorianHi Florian,
it is related with the currency field and it seems to be a bug. Please open a ticket to get the problem fixed. The component is BC-WD-CMP-ALV.
Cheers
Jens -
Hi,
I made a select-option for the field PA0290-PASSL,
but, but i noticed that i couldn't drill down to the table contents of the pa0290-passl. I thought maybe it has something to do with the table being an infotype. Because the select-option works fine for transparent tables like MARA. Are there any way for me to make a drill down for an infotype table such as the one i mentioned above?
Thanks,
FrankHi,
You can use the following code for providing F4help.
types: begin of ty_PASSL,
PASSL type PA0290-PASSL,
end of ty_passl.
data: i_passl type table of ty_passl.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR PASSL.
Select PASSL from PA0290 into table i_PASSL where .....
w_repid = sy-repid.
w_dynnr = sy-dynnr.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'PASSL'
dynpprog = w_repid
dynpnr = w_dynnr
dynprofield = 'PASSL'
value_org = 'S'
TABLES
value_tab = i_PASSL.
IF sy-subrc 0.
ENDIF.
Reward points if helpful.
Thanks and Regards. -
Drill down is not working in 3rd level of dimension hirarchy
Hi,
drill down is not working in 3rd level of dimension hirarchy,any issues. once i clicked on 3rd level it goes to detail level instead of going to 2nd level
thanksany updates
-
Drill down is not working for Pivot tables,but working for chart
I have two reports and trying to navigate betwen summary report to detail report. But details report is displaying all the records .The filter condition is not working and displaying all the filters .I have Case statement in my filter.But the summary report column where the filter condition is applied is aggregated in the RPD level. Does this might be the reason ?. Is it passing different type of data type to details report ?. The filter condition is not working for Pivot table .But Chart is working fine and displaying the only selected records based on the filter condition.
Please help me with the below issue.Hi sil174sss,
Per my understanding you are experiencing the issue with the excel report which have add the drill down action, after export to excel only the expanded nodes included and the collapsed nodes is not shown, right?
Generally, if we expand the nodes before export to excel then the excel will display the expanded details row and keep collapsed the details row which haven't expand, but we have the toggle "+","-" on the left of the Excel to help
control the expand and collapse, when you click the "+" you can expand the collapsed notes to see the details rows.
I have tested on my local environment with different version of SSRS and can always see the "+","-" as below:
On the Top left corner you can find the "1","2", this help to control the "Collapse All" and "Expand All".
If you can't see the "+","-" in the excel, the issue can be caused by the Excel version you are currently using, and also excel have limit support of this, please provide us the Excel version information and the SSRS version. You
can reference to this similar thread:
lost collapsing columns when export to excel
Please try to export other drill down report to excel and check if they work fine, if they did, the issue can be caused by the drill down action you have added in this report is not correctly, if possible, please try to redesign the report.
Article below about how to add Expand/Collapse Action to an Item for your reference:
http://msdn.microsoft.com/en-us/library/dd220405.aspx
If your problem still exists, please feel free to ask
Regards
Vicky Liu -
Removing Drill Down is not summing up the values for key figure
Hi ,
While analysing the data in BW report , I have encounter the problem in getting the correct data.
BW report is showing two records for material , having different customer ie. customer1 & customer 2 .
If i remove the customer from the Drill down , then values is not summed up , rather it is showing the values only for customer1
Scenario:
With customer drill Down:
Material Customer Key Figure1 Key Figure 2
Mat1 Customer1 1000 2000
MAt1 Customer2 3000 4000
Without customer Drill Down
Material Key figure1 Key Figure2
Mat1 3000 4000
In the query designer there is restriction of customer on two characteristic in default value pane.
The issue is happening for particular material , for other material , BW report is working fine.
Please suggest , to resolve the issue.
Regards,
SudheerHi Sudheer,
What properties are set on your key figures 1 & 2. Could they be set to Min or Max.
There may be an aggregation level set if they are calculated key figures that is worth checking.
With regards
Gill -
Drill down for pie chart is not enabled
hi,
i am trying to have a drill down functionality for a pie chart but when i go to drill down option that screen is not enabled.
how to make drill down option enable.
please let me know
Edited by: venkat s on May 9, 2008 9:36 AMi just gave yaxis source and x axix source . it is enabling now
-
Drill Down for Multiple Series in a Line Chart
Hello,
I seem to have a problem with the drill-down functionality in a line chart that has multiple series.
I have a line chart that displays the readings of a patient over a period of 1 month. For each day, there is the glucose level reading, blood pressure reading, etc... So, each reading is a different series in my line chart graph.
The basic requirement is: With a mouse over event on the chart, I am willing to display all the data that belongs to that day. The data will be displayed at the bottom of the screen in a small panel. It is very simple to do it when the line chart has only 1 series:
i) Enable drill down.
ii) Choose 'Row' as insertion type.
iii) Fill out the destination field.
iv) Make sure your labels (at the bottom of the screen) get the data from the destination cell.
When there is more than one series, it becomes very difficult. XCelsius will not let me use the same destination cells for different series. So, I will have to use other destination cells. In that case, I will not know on which day is the user on. Is there any way to achieve this functionality?
Let me know if you need further information.This is certainly possible, but there's a bit of a trick to it (and really hard to explain without screenshots!). There's two halves to it:
1. Write the date that has been selected to a cell (for each series).
2. Write the name of the series that was clicked to some cell (this is the property 'Series Name Destination').
So let's say your three series are Glucose, Blood Pressure and Temp. Have those series names in B1,C1,D1 (with your dates down in column A). Insert a row below the series names (2:2), and then set up your insertion type for the chart as 'row'. The source data (for all three series) should be your list of dates in column a. The insertion cells for the three series will be, in order, B2,C2,D2. Now, depending on which point is clicked in the chart, the selected day will be inserted into one of those three cells. Completely useless unless you know which series was clicked.
So you need to insert the name of the series that was clicked ('Series Name Destination') into the spreadsheet, let's say in F1. The rest is just Excel formulas. The logic is, you can now tell what series was clicked, and go and look up the date that was inserted for that series, then go and look up the row that corresponds to that date. So to get the date that was just clicked, your formula (in F2) would be =HLOOKUP(F1,B1:D2,2,0).
Then a VLOOKUP will get the results from that row of data. For example, if I inserted another row at row 3 (to show my 'result' values) the formula in B3 would be =VLOOKUP($F$2,$A$4:$D$13,2,0).
I hope that makes sense. -
Drill down value not matching with Displayed Report Painter Issue-GR55
Hi,
Need your help for an issue in drill down value of report painter from actual cost coloumn.
I have created a new report group based on OSS Note-157720 in GR55 Traction. This new report group will provide data of Planed / Actual cost, Planned / Actual Quantity of the project in range of fiscal year/periods. The issue in this report is displayed data of actual cost is not matching with drill down data. The actual cost coloumn is formula coloumn which framed by subtracting All periods cost coloumn, Before Periods Cost Coloumn and After periods cost coloumn.
Could you suggest on this issue.
Thank you for your cooperation.
Regards,
RakeshThe report you are running first might have been created with some hidden columns that contain more than one variables relating to period and fiscal year. These may not be matching those that are required to run the drilldown. Look into the definition of the drilldown report. If you would want to match the first report, It may be better to identify which report runs on drilldown and the run that report with the required parameters.
-
Drill Down are not giving correct values
Hi
We created sales Order values as a character and putting them in Rows and populating data by writing update rule. We created variables on calendar month in order to choose specific period of data in the query. For example if we need 02/2008 to 0/42008 which gives two months of data. When I drill down on Sales Order or billing document on the report its not giving variable interval data instead its pulling all the sales orders and billing documents in the Cube. With out drilling down the values are showing OK. If I restrict with same period in the cube it's giving correct values
Please let us know if you have any ideas.
Thanks
NagaAah, I guessed it correctly!
Remove the local var of the Stop button & place the terminal itself inside the inner while loop & directly wire it to the conditional terminal of the outer while loop.
Please see the attached pic...
Message Edited by parthabe on 07-30-2009 07:12 AM
- Partha
LabVIEW - Wires that catch bugs!
Attachments:
arrayreq_mod.jpg 97 KB
arrayreq_mod.jpg 97 KB
arrayreq_mod.jpg 99 KB -
Drill Down is not working after exporting to excel
Hi,
I have created a drill down report in SSRS . Its working perfect. But when I export it to excel, it is showing only the expanded nodes. But I want the same functionality which gives user to expand or collapse the nodes in Excel as well. Can any one please
help me with this?Hi sil174sss,
Per my understanding you are experiencing the issue with the excel report which have add the drill down action, after export to excel only the expanded nodes included and the collapsed nodes is not shown, right?
Generally, if we expand the nodes before export to excel then the excel will display the expanded details row and keep collapsed the details row which haven't expand, but we have the toggle "+","-" on the left of the Excel to help
control the expand and collapse, when you click the "+" you can expand the collapsed notes to see the details rows.
I have tested on my local environment with different version of SSRS and can always see the "+","-" as below:
On the Top left corner you can find the "1","2", this help to control the "Collapse All" and "Expand All".
If you can't see the "+","-" in the excel, the issue can be caused by the Excel version you are currently using, and also excel have limit support of this, please provide us the Excel version information and the SSRS version. You
can reference to this similar thread:
lost collapsing columns when export to excel
Please try to export other drill down report to excel and check if they work fine, if they did, the issue can be caused by the drill down action you have added in this report is not correctly, if possible, please try to redesign the report.
Article below about how to add Expand/Collapse Action to an Item for your reference:
http://msdn.microsoft.com/en-us/library/dd220405.aspx
If your problem still exists, please feel free to ask
Regards
Vicky Liu -
Disable Drill Down For Groups only except SubReport
<p> </p><p>Hi All,</p><p>I have 10 subreports and also 5 Groups sections in one report (version CR 10 - VS.Net 2005) </p><p>I need to disable drill down on Groups <strong>except SubReport </strong>. </p><p> </p><p>Thanks in advance for any solution </p><p> </p><p>-Harini </p>
Where are the subreports located? You mention you have 10 subreports and also 5 group sections. Are the subreports located in the page or report header/footer sections? Are there detail records in the groups? If not, then you don't need to supress drill-down, there is nothing to drill to. If there is, suppress the detail section. If a user drills on the groups, there will be no detailed information visible.
Typically, if you have multiple groups and want to supress drill-down but still display the first group, you can use the 'drilldowngrouplevel >1' statement in the section expert to conditionally suppress the group. Right click the group, select 'Section expert', and click the formula button (the button with the 'X-2' and a little pencil) next to 'Suppress (No Drill-Down) Then, enter drilldowngrouplevel >1. This should do the trick if you have your report structured this way. If not, please provide a little more detail.
Thanks and good luck. -
Lose chart drill-down for webi based on BEx/BICS
Hi All,
I have a client for whom drill-down through charts based on SAP hierarchies is an essential requirement. My research here (and elsewhere) has led me to the following conclusions:
1. IDT Universe (.unx) can't be based on BEx query (functionality briefly appeared then was revoked with subsequent SP)
2. The supported/recommended method for reporting against BEx query is the BICS connectivity
3. A webi report based on a BICS (although offers nice new sap hierarchy interaction) does not support drill-down through charts
Just looking for confirmation that I am correct...and that my reports will therefore need to be based off traditional universes (.unv), to achieved drill down on charts in webi?
Appreciate any feedback.
Thanks,
Ferdie.Hey Ferdie
1. Build table in WEBI Document include the Hierarchy object (0COSTCENTER).
2. Choose the CostCenter, right click set as Selection.
3. Now add new Blank Cell and put it near selection , enter there some text , like JUMP TO, DRILL and etc..
4. Now select the CELL . right click , Linking and Hipper Link or Document Link, and choose there another document
or you also can choose self document. When your linking to another webi document you can transfer to it parameters to prompt. So Transfer the costcenter as parameter.
The document link option available only when you run document in View mode (No rich client without JAVA). I will open OSS to SAP about this issue
Also you can choose to open the document in current window, so then user will think that he is still in same document
Example for link parameter:
/portal/1110311905/OpenDocument/opendoc/openDocument.jsp?iDocID=AdJiD59b4kJKkhNpGCYT8Q0&sIDType=CUID&sType=wid&lsSpsCost%20Center%3A=Ness&sWindow=Same
I hope this will work
Maybe you are looking for
-
I just decomissioned my windows pc in favor of a new (to me) MacBook Pro. When I attempt to sync my iPad I get a warning that I will erase all content on the ipad in order to sync with the new computer. How do avoid erasing all the data on the iPad
-
Hi, i have a list output like this, i want to print this in an A4 size paper, how can i do this... page no : 1 Name : 111111111111 Occupation : 22222222 Country : 33333333333
-
My ipod touch 4 is stuck in recovery mode and i do not know what to do help me
my ipod touch 4 is stuck in recovery mode and i do not know what to do help me
-
Sql Server Network Error !!
HI we hav 2 sys landscape ,dev and qal on one server and prd on one server dev and qal are not getting up simultaneously . when I start dev the qal is getting down and if start qal dev is getting down. but if I start dev alone its getting up and sam
-
IWeb not showing up in Applications
Went to go mess around with Automator today and found that iWeb is not listed on the left pane under applications. Its in my applications folder and the program works fine. Just wondering if there is a simple way to get it on the list. Thanks in adva