Drill down from the charts of VC

Dear gurus,
   can I realize the functionality of drilling down from the charts of VC?
   For example, I have a bar chart. Can I drill down from each bar of chart to detailed infomation about that bar?
   Please advise. I'll assign points if helpful. Thanks in advance.
Jin Ming

Hi
I hope you will get answer from this solved using pop up window for drill down
Thanks & Regards
Harsimran

Similar Messages

  • Drill-Down from several Charts to Same Target

    Hi,
    we have built a dashboard with 3 (soon to be 6) column charts and one line chart below. The colum charts represent 6 KPIs aggregated for a year for different warehouses. Each warehouse is a specific series (because we want them to have a individual colors). When the user clicks on a warehouse in one of the column charts, we want the line chart above to show the
    For this purpose, we have all column charts store drill-down values to the same two cells:
    - One cell stores the series name (warehouse selected)
    - One cell stores the name of the clicked line chart (we use a single cell with the chart name as source for the first series of each chart. After the first series is selected as the default drill-down, this source and destination seems to be used for every series selected, which might be a bug)
    Our problem is, all queries for the charts are loaded at startup. The default drill-downs for all charts are done, and we have a random chart in the drill-down destination. If the user clicks the same chart again, we do not notice this as the value of our target cell does not change. We have tried several solutions for this, but nothing is really satisfactory.
    Does any of you have an idea, or a similar dashboard maybe, where the drill-down of several charts (preferably with several series per chart) is stored into a single target chart?
    Thanks & Regards,
    Sebastian

    Hi Sebastian,
    You cannot have drill downs from different charts to the same target.
    As per your scenario you have 3 column charts with warehouses displaying their respective 3 KPI's values. I believe you would have created a series each for available warehouses. If you have selected drill down on load for all the column charts with one single target then at load all the three column charts will try to place the destination of their selected series(based on warehouse selected) to the same target.
    And also as you mentioned when the user tries to select the same chart again the target doesn't change, the reason is the same as all the charts are trying to put the destination of the series in the same cell.
    Instead of doing it this way, what you could do is to name the series of all column charts the same and have the series name put into one cell. Then based on this series name you can lookup the data for that warehouse and display it in the line chart.
    Here again the user has to select the same warehouse in all the three column charts else it wont work.
    Hope this was useful =]
    Thanks & Regards
    Arjun.C.T

  • Drilling down from OmniPortlet chart to detailed chart in same OmniPortlet?

    I am trying to use OmniPortlets to create a dashboard of charts showing different metrics.
    I want to be able to drill into each chart to get a more detailed chart in the SAME OmniPortlet frame with all the other charts being unchanged. So if I have 3 OmniPortlet charts C1, C2, C3 in the same page, I want to be able to click on C1 and to be able to drill into C1 (details), C2 and C3.
    I am trying to do this through OmniPortlet events, parameters and page parameters.
    1) I've defined a OmniPortlet Param1 to parameterize the source of data - So my source URL is http://<URL-base>/##Param1##
    2) I then defined a Page Parameter PP1 that is associated with Param1 and set a default value for this (to make sure ##Param1## gets set for the top level chart). I set this default value in the OmniPortlet Parameters page - (otherwise, the ##Param1## seems to map to a null sting despite the Page Parameter PP1's default value)
    3) Finally, I defined an OmniPortlet event that gets fired when I click on the chart. The Event sets as one of its parameters, the data source that has the drilldown data. This column name is PP1.
    So, the chart should first display with the data source URL being initialized from the Page Parameter. When I click on the chart, the Event should set up a new parameterized value in the data source so that next chart with drill down data is shown after a page refresh.
    The reality is different from this theory. When I click on the chart, for some reason, the value of Param1 for refreshed Omniportlet display seems to be getting blanked out. So my chart definition gets messed up since the data source is now invalid. The page however continues displaying the original (pre-drill) chart from the cache.
    2)
    I don't know whether this problem is because of an improper use of the Page Parameters and OmniPortlet events or whether this is because I seem to be forced to set Param1's default value (maybe this is overriding my data source URL even in the drill down chart).
    There seem to be some examples of the chart click causing another chart to refresh. These docs don't have a lot of detail, plus I want the SAME OmniPortlet to show the drill down chart.
    Has anybody done this? Any pointers would be appreciated..

    Hi Sebastian,
    You cannot have drill downs from different charts to the same target.
    As per your scenario you have 3 column charts with warehouses displaying their respective 3 KPI's values. I believe you would have created a series each for available warehouses. If you have selected drill down on load for all the column charts with one single target then at load all the three column charts will try to place the destination of their selected series(based on warehouse selected) to the same target.
    And also as you mentioned when the user tries to select the same chart again the target doesn't change, the reason is the same as all the charts are trying to put the destination of the series in the same cell.
    Instead of doing it this way, what you could do is to name the series of all column charts the same and have the series name put into one cell. Then based on this series name you can lookup the data for that warehouse and display it in the line chart.
    Here again the user has to select the same warehouse in all the three column charts else it wont work.
    Hope this was useful =]
    Thanks & Regards
    Arjun.C.T

  • Drill down from the financial reports

    When generating a P&L or Balance sheet, it is not possible to view what transaction the amount is made of. you have to either generate a general ledger report or have to chart of account window open at the same time. Simple programs like quickbooks have the functionality to do drill down from any report. we have multiple customers for whom this situation is very aggravating.
    We hope you can find a solution or make this part of a new release.
    Thank you
    Sophie St-pierre

    Hi
    I hope you will get answer from this solved using pop up window for drill down
    Thanks & Regards
    Harsimran

  • Drill down from Pie Chart

    Why  does the Insert Chart sometimes not give you a drill down capability from the  Pie chart

    Hi,
    Its is possible and please have a look in the below link and it got detail steps
    http://www.xcelsiusjournal.com/index.php?option=com_content&task=view&id=67&Itemid=2
    Thanks

  • Drill Down From Combo -- Chart -- Chart

    I Have a Combo box with Company and when I select Company it should display me the Pending count by ecah month in a chart..
    Till now I achieved..But after that can I drill down further to see Pending Status,Size ,age!!
    Please suggest!!
    Thank you,

    I arranged my chart.. I used the filter component and I am getting the policy count for each month according to distribution channel and Company!!
    Channel---->Company>Jan-->Feb--->     Mar
         IMO-->     AIL>     100->     40--->     70
         IMO-->     AML-->     200->     500--->     80
    The secound chart should display following
    Channel-->     Company->     Case Size>     Jan->Feb>Mar
         IMO----->AIL->     0-10k>20-->30>30
         IMO-->AIL->     11k -50 k>     80--->10>70
         IMO----->AML-->     0-10k--->     50->100-->40
         IMO----->AML-->     11k -50 k>150->400->40
    ================================================
    If I click Policy count of IMO,AIL in January which is 100 it should give following information in drill down
    Casesize-->Jan
    0-10k------> 20
    11k-50K--->80
    ==============================
    Please let me know How will I map it!!

  • Drill down through the chart

    I have a pie chart in one analysis. It is based on the company name and number of employees. My requirement is to show particular company information when I click on particular section of chart. Currently I am trying this with Criteria->column->column properties->interaction->primary interaction.
    I have created another report which is containing all the company information. but I am getting information of all companies instead of particular company. So, How can I get information of particular company?

    did u make that column as IS prompted in 2nd report...In ur case Company name.

  • Drill Down from Chart View

    Hi,
    I have a Pivot table with Chart view only, I want to drill down from the legend and from teh graph itself, is it possible? If so please let me know the steps involved.
    Thank you very much.

    UPDATE POST
    @SSk
    can you try this never i tried,the legend that is coming is a column from your request right?...go to column properties in that you find a option called navigate there you place the navigate report and see if the legend is showing a link below it to navigate
    follow this topic navigate value interaction of a column http://gerardnico.com/wiki/dat/obiee/olapoperation_
    if it works i would be happy,but never i tried......please try this and tell me did you get or not???
    Cheers,
    KK
    Edited by: Kranthi on Jan 20, 2011 7:14 AM

  • Error Message appears when drilling down from a report.

    Hi,
    I am using CR XI R2.
    I have an rpt file that displays a chart from a sub report.
    I tested it on the CR designer and report viewer - works ok.
    When I display this report in my .Net application, I get an error message when drilling down from this chart : "The Report Application Server failed"
    When looking at the log files I see this error message:
    4 19 13:11:14.770 5336 5564 (\servers\ras\dtsagent\reporthandler.cpp:11622): CReportHandler::buildReportViewerError: CSResultException thrown.   ErrorSrc:"CRPE" FileName:"\servers\ras\dtsagent\reporthandler.cpp" LineNum:11618 ErrorCode:997 ErrorMsg:"" DetailedErrorMsg:""
    This is a Viewer error - but when drilling down from the Report Viewer I don't get this exception.
    Does anyone know what this mean?

    Too strange and my require a phone support case;
    http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
    Three ideas:
    1) Install CR designer on one of the boxes where this does not work and try to run the report there
    2) Add a line to your code and save out the report just after your database logon once ( .saveAs). try to run this report in the CR designer.
    3) Use the [modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] utility to compare the runtime - both CR and db client between computers that work and those that do not.
    Ludek

  • Drill down on bubble chart

    Hi all,
    I am having a bubble  column chart. when drill down the bubble  chart. one more chart will display. is it possible to open the drill down chart in new window?
    & how can I drill down on bubble chart
    similar to this report
    http://www.recovery.gov/?q=content/investments
    Thanks

    Priya,
    You need to use drill down option in Bubble chart and dynamically display Chart placing it in a Panel container. It is similar to this http://xcelsiusandme.blogspot.com/2009/07/xm-sample-2-pop-up-with-url-button.html
    Instead of Report 1 button...have drill down from bubble chart.
    -Anil

  • Cannot drill down from 2nd lowest level to lowest level of hierarchy

    In my item master hierarchy, I cannot drill down from the 2nd lowest level (Product Class) to the lowest level (Item Detail).
    When I add another level between these 2 levels, then I can drill down from Product Class to this new level, but I cannot drill down from this new level to the lowest level.
    Also, if I set the preferred drill path at any level to drill down to the lowest level, it instead drills down to next level down intead of of drilling to the lowest level.
    Any thoughts as to why I would not be able to drill to the lowest level of this hierarchy?
    Thanks,
    Travis

    OK, next check, any security in place on the presentation columns which would make the lowest level column unavailable to the user account?
    Are you running the report as Administrator?

  • Drill down from a line graph? Make the entire graph click-able?

    Guys, i can drill down from other types of charts except a line chart.
    Is there anything that is special about the line chart?
    Also, can i make the entire graph click-able? So, instead of clicking on a bar to trigger a linked report, can the whole chart be a link basically?
    Thanks for your help

    There is not special with the line graph..... Just click on the data symbol to drill or navigate. These settings can be found under the "additional Charting Option" button.
    regards
    John
    http://www.obiee101.blogspot.com/

  • Double-clicking on a Analytic chart element to drill down to the next level Performance Point Service

    Hi,
    How to Drill Down the Analytic Chart on Double Click on the chart bar in SharePoint Performance Point Service.
    Double-clicking on a Analytic chart element to drill down to the next level Performance Point Service.
    I have connected with Cube. I am working in SharePoint 2010.
    Thanks & Regards
    Poomani Sankaran

    It has to do with the order you enter the fields in the Business Model from Physical model! It must be the opposite way than the one you want them to be show. In your case, you must first delete both fields from your business model, then drag tham in with first the "name" field and then the "code" field.
    It did work for me!

  • How to configur Drill down on Bubble Chart

    Hi,
    Can anyone please hel me with examples - how to confihure drill down on bubble chart.
    that means,
    1) whenever the user clicking the bubbles - the pop up window should display some notes related to that bubble
    and also in another requirement
    2) whenever the user click the bubble - the pie chart should display the values related to that bubble.
    please help me on achieving the same..

    If the Bubble size is constant we can do this.But as you know Bubble sizes varies from once to one place..It will be tough scenario if you want to do it here..Instead take a label based menu and try to use dynamic visiblity .And show labels in there which contains the text for the respective labels..

  • Cash Management Report FF7B - drill-down from planning levels to AP/AR OIs

    Hi
    I'm configuring cash management and have created all planning levels and groups needed.
    All master data, ie GL accounts, vendors and customers, have the correct planning level or group.
    I've created all the groupings etc that I need.
    I'm running the reports FF7A and FF7B. I have two questions and problems.
    1. When running the Liquidity Forecsat for customers and vendors I drill-down to the standard PL or SL planning levels for AP and AR postings respectively. Then I drill into the planning groups correctly  (E1-E9 and R1-R8). But when I try to drill into the cash management detail records  (or is it the AP/AR line items?) I get "Memo Records: List - List Contains No Data". This happens every time. Should I now see the AP or AP line items? Or should I see some cash management memo records? I have deleted all the cash management data several times and recreated but I still get this problem  (using reports RFFDDL00 and RFFDKU00)
    When I do the same for purchase orders, purchase requisitions or sales orders I see a Memo Records List which agrees with the previous planning level total and I can then drill into the actiual POs, PRs or SOs from this list without an issue.
    2. When running the Cash Position and I do the drill-down to the GL Line Items, I get an enormous list which does not just show the total of items at the previous planning level. Why is this please? Example: a bank account with a balance of £2,000  (shown on the panning level) but with 000's of line items totalling say £5m. Again I have deleted the CM data and recreated but without any improvement to the problem.
    Any help anyone can give me with these issues will be very much appreciated.
    Thanks.
    Wayne

    Hi
    I have the same trouble with Tcode FF7B.  There´s a message "Memo Records: List - List Contains No Data"; bit in the TcodeFF7A, it runs OK.  The message appears just witn Tcode FF7A.
    Also, There´s all TR data in tables FDSB for GL accounts, FDSR and FDFIEP for customers/vendors.
    Can you help me??  can you solved this issue?
    Tanks for your Help

Maybe you are looking for