Drill down in Bex is different than drill down in WAD

Hello experts.
I have been creating queries in Bex for 6 years and am very familiar with the Bex functionality. I recently started embedding some Bex queries into the WAD and of course am displaying them on the web. I am experiencing an unexpected problem with drill downs on the web. In a nutshell, the query drills DOWN as expected in Bex, but when I drill down on the web, the results are displayed ACROSS the web page instead of down the web page.
I am not using any custom HTML, Java, or other custom code. Has anyone experienced this? Any thoughts on how to correct? Here is more specific detail:
Bex query looks like this:
3 Characteristics in characteristics section.
3 Key figures in COLUMNS section
Nothing in ROWS section
Drill down in Bex yields characteristic values in rows, and key figures in columns (appears to be perfectly normal behaviour)
Drill down in Web yields characteristic values ACROSS the columns and key figures ACROSS the columns (not expected)
Objective is get to Web result to behave identical to Bex results where characteristic values display in rows, and key figures display in columns
Thank you.

Hi
Go to WAD and check for the Web items under Navigation.. and the result table.
you will find the options for the same.
Regards,
Vishwa,.

Similar Messages

How do I reset my computer password? I have it written down and it will not work. This is different than my apple ID

How do I reset my computer password so I can download software to my computer? This is different than my apple ID,
I wrote it down but it is not working. Need help

You have encountered the Activation Lock. If you are trying to activate an iPad or iPhone and it is asking for a "certain" (your word not mine) Apple ID and password, you have encountered the Activation Lock. This is a security feature that prevents thieves from setting up and using a stolen or lost iPad or iPhone. You have no alternative. You must enter the certain" Apple ID and password to use the device. If you cannot do this you will never be able to activate the device and no one can help you do it.

I just upgraded to lion on my intel macbook. I would like to change my facetime alert to something different than a phone ring and, I would like to be able to have full screen. How do I do this?

I just upgraded to lion on my intel macbook. I would like to change my facetime alert to something different than a phone ring and, I would like to be able to have full screen. How do I do this?

Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

Picture is different than in preview screen

When I click on one picture in the Photo Screen, it is different than when it is showing multiple pictures at once. How do I get to show the right picture which is the one in full screen.

Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to rebuild the thumbnails. It can take 3 or 4 goes for this to work

The way Aperture renders my Nikon RAW (NEF) files look different than...

The was Aperture renders my NEF files looks different than NX...
Ok so I use all the in camera setting/tools to the best of abilities to try and cut my editing down as much as possible but when shooting RAW I end up having to tweak every images to get them back to what they really look like... I shoot often RAW and JPG combined and when I open a NEF in NX and a JPG in PS they are identical and need very little work, when I use Aperture the NEF files are very different looking from the JPG (or NEF in NX) and every single one needs tweaking (I get more redish/pinkish skin, often a hint of green cast to (slightly off WB/tone thing) and more contrast.
Below is screenshot showing the difference between a JPG (or NEF in NX) and a RAW file in Aperture
[img]http://www.pbase.com/ray645/image/120052970/original.jpg[/img]
This is just a silly snap shot in very flat overcast light, and has the least amount of shift or difference of any image type so far, when I use strobes, shoot for a more contrasty image, gel for color and manual WB the differences are huge almost to the point that you would think you where looking at two completely different images and not the same NEF opened in different software.
How do I go about getting Aperture to render my NEF's more like what I shot like NEF in NX, JPG in anything, and even the back of the camera screen?

Thank you, that seems like will work, just having the boost turned down a bit on import has helped tremendously but I cant stop feeling like I am moving towards the "Fix it in post" mentality
I will need to get better at tweaking my images... No matter how I try I cant kill the pinking skin or the very faint green glow in blond hair or bright neutral tones without affecting other areas of the image.. I am sure I will figure it out but anyone having any tips or links that could speed up my process I would appreciate it.
The green is weird its like someone snuck a small florescent light into all my shoots without telling me, not major but enough to be annoying.
I shoot a ton of motor sports (3000 images a weekend) and shoot JPG and have gotten good at using in camera pre sets, knowing what I got and getting it right in the camera, I wish Nikon would give up the code or whatever is needed for all the info to be carried over to Aperture..... I would pay the $100 or whatever to use the NX engine in Aperture

Unpluggin the Ethernet is Different Than Turning Off The Server!

Hi All,
I am working with a cFP2020 with a 4 space backplane. I am running Labview 8.0 RT. Have not gotten around to putting in the latest set of CD's I just got sent. I have the whole setup on my desk here and am noticing a potential problem for my application. Was hoping that someone could explain this to me?
I am building a vehicle, with the cFP on the vehicle and a PC controlling the vehicle. Mostly Im turning on lights and reading sensors on the vehicle, but I am transmitting some commands.
My perfect world would be that if I lost communication between the vehicle and the PC, that the vehicle would recognize this within a reasonable ammount of time (1-2 seconds) and stop itself. I would like a whole routine for "com failure" to run if that is the case.
My questions:
It does not look like I want to use the fieldpoint watchdog because everything I have read indicates that on a watchdog com error, the fieldpoint shuts down. Am I wrong? Should I look further into this?
I wrote my own watchdog. It sends messages back and forth on shared variables. If a message is late, it turns off a light (using cFP led's on the main module.) The PC VI is running as part of the project. The Vehicle VI (on the cFP) is compiled as an application that runs on startup. I have experimented alot with failure situations. The following work fine:
- Stopping the PC VI that communicates with the vehicle VI. The light on the cFP turns off fine.
- Stopping the Shared Varaible Engine. "Undeploy" on the shared varaible in the project. The light turns off fine. Infact both the PC and the Vehicle VI's register the dissconnect with their lights.
The following does not work right:
- Unplugging the ethernet link! The VI on the vehicle (cFP) is still running (got another blinking light going), however it takes 11-16 seconds for the light to turn off, indicating the disconnect. This is quite a bit longer than the other methods that work fine (those are about 1-3 seconds). Can anyone think what is going on?
I know this seems like an essoteric question, but it gets to the protocal for the cFP. Should I be running my PC VI as an application? I am running it in the project.
Thanks
Kevan -
As an aside, is there a way to deploy an application and have it run immediatly upon deploy. I am having to reboot to run the application. I notice different performance if its running from the project v. it running as an app. Since I will be using it as an app in the final product, I want to test it that way.
Thanks Again -

Kevan,
The quick answer is that most NI ethernet protocols are implemented with 10 second timeouts. This is different than the undeploy in that stopping the shared variable engine will send unsubscribe messages rather than timing out. (Note: I am making an assumption on how the shared variable protocol works because it is partially based on the older Logos protocol used in Fieldpoint, and that is how the closing works for Logos).
As for the watchdogs, there are two watchdogs in [c]FP RT modules; the RT watchdog (which can reboot the controller) and the network communications watchdog (which can set one or more outputs to a desired state on loss of communication).
For a very rapid communication link disconnect, implement the shared variable as a boolean that has it's state inverted every half second. Have the [c]FP controller read the variable and look for changes in the state of the variable. If the variable does not change at the update rate (with some small margin for timing), then you have probably lost the link prior to getting a full network timeout.
Regards,
Aaron

My imac (intel core i5, OS 10.10.1) shuts down every night and will not "wake up" next morning -- it never used to do that -- if I hold down the start button more than twice for many seconds, then it will finally boot up and works fine all day – I've

my imac (intel core i5, OS 10.10.1) shuts down every night and will not "wake up" next morning -- it never used to do that -- if I hold down the start button more than twice for many seconds, then it will finally boot up and works fine all day – I’ve tried shutting it down and unplugging it, and that does not work -- I’ve run disk utilities checked permissions, and run anti-virus and get no adverse results – I cannot figure out what is different that causes this problem

From previous experience 3 indicates a shutdown initiated by the SMC (System Management Controller) — hardware responsible for many low-level functions including power, sleep, lights, and fan activity.
Try resetting it:
Power or other problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset. Read all the steps.
Before Resetting the SMC
Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
Press Command + Option + Escape to force quit any application that is not responding.
Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.

[SOLVED] makepkg builds differently than local build

SOLUTION: my makefile with `CFLAGS += ...` did not pick up the local CFLAGS environment variable, with the command in my second post, my local build has the same issue as the makepkg build.
I have a project of mine alopex which I'm polishing up a new version for. I've been running a locally built version for a while, but when I installed it with makepkg I'm getting all sorts of memory errors and crashes when I run it.
The first obvious difference between my local build and makepkg was that makepkg strips the binary - so I stripped the local binary, but no change: the local build in ~/code/alopex/ worked fine, but the makepkg/pacman installed version in /usr/bin/ did not.
The next step was to source /etc/makepkg.conf for the local build to use all the same CFLAGS and LDFLAGS as a makepkg build. But this also lead to no change in the results.
Here are the two files, both from the exact same git source, both built with makepkg.conf build flags, and both stripped.
$ ls -l /usr/bin/alopex
-rwxr-xr-x 1 root root 48280 Feb 13 14:21 /usr/bin/alopex
$ file /usr/bin/alopex
/usr/bin/alopex: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.32, BuildID[sha1]=03e8e16e7208d6c97bce6bd545f45d20c7a7606a, stripped
$ ls -l ~/code/alopex/alopex
-rwxr-xr-x 1 jmcclure users 54760 Feb 13 14:30 /home/jmcclure/code/alopex/alopex
$ file ~/code/alopex/alopex
/home/jmcclure/code/alopex/alopex: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.32, BuildID[sha1]=0659354ed5a904fe93894f14d6bd413ea278396e, stripped
I can't figure out why the binaries are difference sizes and have different checksums. I suspect there is an error in my code that is only exposed when built with makepkg - but this is hard to track down without knowing what makepkg is doing differently than my local build. To be sure relative paths couldn't be relevant, I also moved the locally built binary to /usr/bin/ (overwriting the makepkg/pacman one) and it executed just fine.
So - my main question is, in addition to stripping a binary and using the makepkg.conf flags, what else is different about the makepkg build and my local build? I'm guessing it might have to do with makepkg using a clean chroot build environment (right?), but namcap doesn't detect any missing dependencies or any other issues.
Below are many details that may or may not be relevant
EDIT: in case it's relevant, here is the `env` output for the local build with only the PS1/PS2 and LS_COLORS removed as they are long and I can't imagine relevant.
XDG_VTNR=1
LESS_TERMCAP_mb=
XDG_SESSION_ID=1
LESS_TERMCAP_md=
LESS_TERMCAP_me=
TERM=rxvt-unicode-256color
SHELL=/bin/bash
WINDOWID=6291462
OLDPWD=/home/jmcclure
LESS_TERMCAP_ue=
USER=jmcclure
_JAVA_OPTIONS=-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true -Dswing.defaultlaf=com.sun.java.swing.plaf.gtk.GTKLookAndFeel
SYSTEMD_PAGER=
PAGER=vimpager
MOZ_PLUGIN_PATH=/usr/lib/mozilla/plugins
LESS_TERMCAP_us=
MAIL=/var/spool/mail/jmcclure
PATH=/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/bin/vendor_perl:/usr/bin/core_perl:/home/jmcclure/code/bin:/home/jmcclure/code/bin
HG=/usr/bin/hg
LC_COLLATE=C
PWD=/home/jmcclure/code/alopex
JAVA_HOME=/usr/lib/jvm/java-7-openjdk
EDITOR=vim
LANG=en_US.UTF-8
HISTCONTROL=erasedups
COLORFGBG=default;default
SHLVL=2
XDG_SEAT=seat0
HOME=/home/jmcclure
TERMINFO=/usr/share/terminfo
XDG_CONFIG_HOME=/home/jmcclure/.config
_JAVA_AWT_WM_NONREPARENTING=1
LESS= -RXx4
LOGNAME=jmcclure
LESS_TERMCAP_so=
LESSOPEN=|/usr/bin/src-hilite-lesspipe.sh %s
td=
WINDOWPATH=2
XDG_RUNTIME_DIR=/run/user/1000
DISPLAY=:0
COLORTERM=rxvt
LESS_TERMCAP_se=
_=/usr/bin/env
As a temporary work-around, I found that the following produces a working binary and somehow avoids the step that is leading to the crashes
makepkg
cd src/alopex
make clean
make
cd ../..
makepkg -efi
I've been tinkering with readelf to see what differences I can pinpoint. I really don't know what I'm doing, but it seemed the symbols (-s) and dynamic links (-d) were all the same between the two version except for the addressess/offsets/hex-number-column. So I tried checking the readelf -h output and I get a couple differences there - in this output, the /usr/bin/alopex version is the working one:
diff <(readelf -h /tmp/alopex/pkg/alopex-git/usr/bin/alopex) <(readelf -h /usr/bin/alopex)
11c11
< Entry point address: 0x4030d8
> Entry point address: 0x403020
13c13
< Start of section headers: 46488 (bytes into file)
> Start of section headers: 52968 (bytes into file)
17c17
< Number of program headers: 9
> Number of program headers: 8
I'm not sure what these differences mean, but they are consistent with every working and non-working build.
Readelf -l output indicates that the extra program header in the nonworking version includes the following:
08 .init_array .fini_array .jcr .dynamic .got
Each of these symbols exist in the working binary as well, but they are duplicated in the non-working version (still no idea what this actually means, but in case someone else can decode this ...)
Last edited by Trilby (2014-02-13 20:38:13)

Crap - you are, of course, right. It seems my Makefile is not doing what I thought it was. I define makefile variables for flags with += operators, which I thought picked up the current value from the environment. But it seems not to do this.
I plan to fix the crashes, but I was stumped, and I wanted to know why it worked in some builds and not others - I'm hoping this information will help narrow down what my coding error is.
EDIT: a local build with `CFLAGS="$CFLAGS" LDFLAGS="$LDFLAGS" make` reproduces the error.
Thanks for the help - now I know which flags expose my error, so I may be able to narrow it down.
FOLLOW-UP: Thanks again - while I have no doubt that my troubleshooting steps are unconventional (as I have no 'conventional' training in programming) this did allow me to track down a bug in my code which I had been missing.
Last edited by Trilby (2014-02-13 23:03:54)

I will travel to France and let me know if I should buy any adapter to charge my iphone?, because the plugs are different than here in chile

I will travel to France and let me know if I should buy any adapter to charge my iphone?, because the plugs are different than here in chile

Hi Shawn,
It sounds like the person who installed the hardware didn't install the software properly for you. You should reinstall this to get full functionality and control yourself.
The process is easy:
) With the computer on, close all programs that are running and put the Creative CD-ROM into your computer's CD or DVD dri've. There are probably several disks; the one that you want should say 'Intallation and Applications CD' on the label.
2) The Setup program should start automatically in a few moments, but if nothing happens, click your Start menu and choose Run..., then click the Browse button. From the 'Look In' drop-down menu, choose your CD/DVD dri've. In the list of files that appears, choose the one called Setup or Setup.exe.
3) The Setup program will let you choose what to install. Choose to install everything. There might be two separate Setup processes that start after this: one for the soundcard's drivers, and one for the Creative MediaSource software. Within each process, when you are given the choice of Full, Custom, or Basic, select Full in each case. Follow the instructions in the programs and they will guide you through the setup process.
IMPORTANT: you will likely be given the option to use digital output only to your speakers. Only select this if you have digital speakers, attached to the sondcard through only one digital cable. If your speakers are attached using several cables, you should use analog output.
4) Once all of the Setup programs are completed, they will probably have you restart your computer.
All of the above should have been done when the card was first installed, but it seems that whoever you paid to do the installation didn't bother with the software install.
After this is all done, you should be able to use all of your speakers. If you are still having trouble, you will be able to follow the instructions that you were given before on how to enable CMSS.
Good luck!
Neeraj Mathur

Why is the contents of Safari's downloads folder different than the actual folder?

Why is the contents of Safari's downloads folder different than the actual folder that resides in my users folder?

Problem is if I delete that .plist I'll delete those downloads. I'm still able to launch those downloads from that location so that tells that file is probably not corrupted. I need to be able to located that folder and transfer the downloads from it before I do anything like this. So that begs the question, where is that folder located? When I do a folder search I'm taken to a Downloads folder, but it's not the one that is showing up from within Safari as it's contents are too different.

I am having a problem with homesharing on my apple tv. The email address on my tv is different than what I am registered with. How do I correct the email address that is being displayed under home sharing on the apple tv?

Somehow my apple id email address under homesharing on my apple tv is different than that used for homesharing on itunes in my imac. I can't access home sharing on my apple tv because of this. Can you please tell me how to change it on the apple tv in order to get homesharing to work?

turn off home sharing on apple tv, then turn it on again, entering new credentials. Apple-TV works very reliably with home sharing unlike iDevices which don't

If I have two email accounts, one personal hotmail account and one MS Exchange work account, how can I setup individual notifications for each account. Right now, any email from any account has the same notification. I want work to be different than perso

If I have two email accounts, one personal hotmail account and one MS Exchange work account on my iPhone 4s, How can I setup individual notifications for each account? Fore example, if I get a work email, I want to hear a DING, DING....If I get a personal email, I want to hear a BEEP, BEEP. Right now, any email from any account has the same notification. I want work incoming email notification to be different than personal incoming notification. The only semi-workaround I've seen is just disable any notification for the Hotmail account, so only work emails would notify. But then I don't know when I get a personal email. Even the lowely Blackberry Torch 9800 has this feature..not iPhone 4s??
Thanks

Sorry you get only one notification sound for all email accounts. you can send a suggestion to apple here http://www.apple.com/feedback/

I had my itunes acct with a yahoo mail, now Im using icloud with my apple id, which is different than itunes I had. how can I merge this 2 accounts? I still have money in my old itunes acct. 2 acct

I had my itunes acct with a yahoo mail, now Im using icloud with my apple id, which is different than itunes I had. how can I merge this 2 accounts? I still have money in my old itunes acct. 2 acct

Is your phone still signed in with your old iTues ID for iCloud (in Settings>iCloud)?

Calendar on iOS 7. Anyone noticed that when you enter text into the "notes section" of a day, the text disappears behind the keyboard rather than scrolling down to keep pace with text entry ? Looks like an 7 glitch to me ?

Calendar on iOS 7. Anyone noticed that when you enter text into the "notes section" of a day, the text disappears behind the keyboard rather than scrolling down to keep pace with text entry ? Looks like an 7 glitch to me ?

Doesn't do that for me. Try resetting the phone

I entered a new calendar event at I cloud on my laptop. The enent showed up on my I Phone 4S but, the start and finish times on the entry in I cloud was different than the times shown on the I phone calendar. How do I sync the time in my I Phone with

I entered a new calender event using I cloud on my laptop. The enent transfered to my i Phone 5 S but, the start and finish times shown st i cloud on the laptop are different than the times shown on the i phone. How do I sync the times on the i Phone with the times shown on the laptop i cloud calender?

Turn off time zone support on the phone.

Drill down in Bex is different than drill down in WAD

Similar Messages

Maybe you are looking for