Drill down in mangement cockpit

Hi friends,
Could anybody simply explain what is meaning of drill down in managment cockpit?
1. How many levels of drill down, one can provide drill-down in a frame?
2. Can we drill down from monthly to calday wise, year to date,month to date and quarter to date?
3. How can i use calmonth in interval representaion in selection criteria of a frame (cockpit design)?
thanks,
naresh

Version SEM6.0 on BI7 system.
Line: -
If anybody able to access below url info, pls forward me info in this thread:
Make the SEM Management Cockpit More Useful with Drill-Down Configuration
by Paul Halley, Director of Strategic Enterprise Management, Business Information Solutions
Financials Expert - Volume 3 (2004), Issue 2 (February)
http://www.financialsexpertonline.com/article.cfm?session=&uid=d05762e8-8d85-450f-bcea-228d9cd01f3e
thanks,
naresh
Edited by: Naresh P on Dec 15, 2008 8:06 AM

Similar Messages

  • BI Admin Cockpit Drill down routing to unknown host

    Hi Experts,
    We have implmented BI Admin Cockpit and testing it. When we try to drill down the query, it is opening in a seperate window and the host of the url is different than actual system. This shows  Bad Gateway error.  How to change this to actual host and do it. 
    Regards,
    Suresh

    Hi Suresh,
    Do you mean that if you right click on any query, select goto -> opitons like display infocube, object overview etc, the url of different system is getting open . If thats the case, ask Basis team to look into it.
    Show them the url, they will get hint from it.
    Hope it helps.

  • Drill down in BI Admin cockpit

    Friends,
    I successfully installed and setup BI admin cockpit.
    In the portal , when I clicked on Data Load Status-> and then
    Process Status, it lists process chains and processes in different iVews.
    when I move the cursor over a process chain, the cursor turns to thumb. But if click on that, it is not talking to another screen. I'm not able to drill down on any tab/items.
    Please help.
    Joe

    Hi
    You should have the relevant authorizations for the same.
    Hope it helps

  • SEM Cockpit Drill Down Parameters are Missing

    Dear Team,
    I am facing a strange problem with BW-SEM Cockpit - we had imp. the SEM
    Cockpit a year ago and it was working fine with all drill down parameter within
    the internal web. but suddenly for some reason, all my cockpit KPI graphs are
    not showing the drill down parameters, I have checked my settings of each KPI
    for parameters, all are intact, no changes..
    But how come it is happing all of sudden..?
    guys kindly throw some light on this issue if any one of you have come across
    this situation..or any std. proposals/recomended sol. are welcome.
    Regards.

    You should fill checkbox 'Display Hierarchy Icons' in BEx Analyzer - anlysis mode - analysis grid. ([http://help.sap.com/saphelp_nw70/helpdata/EN/85/1321d0b7864766b5208a0b221a7608/content.htm|http://help.sap.com/saphelp_nw70/helpdata/EN/85/1321d0b7864766b5208a0b221a7608/content.htm])

  • Managment cockpit(drill down settings)

    Hi friends,
    At frame level i want to drill down on particular characterstic eg: region(zregion). what setting i have to made inorder to see 'zregion' field in defining: "Drill down settings"(inside screen, left side list of characterstics) for management cockpit? In selection criteria while defining frame, do i have to give all region values in order to select one of region values through "parameters" option?
    Actually i'm displyaing expenses, eg: exp1 & exp2 on month wise. User wants to see on regionwise these two expenses in the same graphic frame. I want to give through "parameters" option. How can i achieve this? 
    thanks,
    naresh

    Hi friends,
    upto some extent i got required things. I included characterstic 'zregion' in selection criteria step with set of 4 values while designing a frame in cockpit. Now i'm able to see field 'zregion' in drilldown setting option(left side pane of characterstics) and then dragged to right side pane for allowing drill down in frame. Next at presentation mode of frame(cockpit), in for month wise(x-axis,chart type: colon chart) able to see with two expenses. After that i want to drll down on expenses using "parameters" option, it displays list of regions for drill-down. But if i selected any region, it won't show respective regionwise expenses. How can i achieve this?
    thanks,
    naresh

  • Drill-down (navigation) in BI Administrator Cockpit

    Hello,
    We have installed BI Admin Cockpit on all the newest SPSes. But the strange problem is that I cannot do any drill-down / navigation on displayed standard reports (running in portal). BW context menu just do not pop-up when I right-click on report's element, like characteristic. Is it how it should be? I remember BI Admin Cockpit from almost year ago, and I think it allowed drilling...
    Another - less important - question is what should be the BW version of queries and webtemplates used in BI Admin Cockpit? Again, I remember year ago they were 3.5. Now it seems that queries from content are 7.0 and webtemplates are neither 3.5 (thay contain xhtml tags) not 7.0 (you cannot open them in new new WebAD).
    Thanks!
    -Vitaliy

    Ideally you should be able to get it from table
    Frontend & OLAP Statistics:
    - RSDDSTAT_OLAP (database view)
    and data Data Flow is as below-Reporting on 0TCT_MC21
    0TCT_DS21
    0TCT_C21    0TCT_VC21
    0TCT_MC21
    You should get following statistics-
    Average Query Runtimes
    Predefined runtime categories
    Drilldown to navigation step
    Monitor query activity
    (example: navigations / day)
    Hope it Helps
    Chetan
    @CP..

  • Drill down to a fact detail

    I am trying to figure out how to drill down from a dimension heirarchy to a fact detail. It just does seem to work. I have
    Manager
    ---Project manager
    Then projects facts
    The totals by project manager work well, but I tried creating another level below manger and add some detail, but get errors that a level with more detail exists from a different table. The only thing which seem to get close is if I select a different drill path from a dimension which has the project number in it. Thats almost it.
    Any simple ideas :)

    Hi,
    This issue occurs when you have not set the logical level of the fact sources correctly. When you adda detail level under the
    Manager
    ---Project manager
    you need to change the logical mapping level in the fact table. The steps to do so is provided below:
    Say you have the dimension table manager. You add a detail column in the hierarchy details under Project manager.
    Now you go to the Fact table from where you are getting the data.
    Step1> In The BMM layer of RPD click the + sign beside the projects fact table. It will list the columns and the sources folder.
    Step2> click the + sign beside the sources.
    Step3> Select the appropriate table from(for example projects) which you need the detail data.
    Step4> Double click the source table. Go to Content tab.
    Step5> In the Manger Dim table select the Detail column name in the logical level field.
    Save the RPD and this will solve your issue.
    Edited by: Satyabrat Acharya on Apr 17, 2009 12:52 AM

  • Drill Down Settings

    Hi
    In BPC for Excel is there a way to default the Drill Down options in Workbook Options to 'Expand by inserting new rows' currently all our workbooks open with 'Expand by overwriting rows', which we never use, so each time we start a new workbook we have to change the setting.
    Thanks in advance for your help.
    Kiund Regards
    Gav

    Hi friends,
    upto some extent i got required things. I included characterstic 'zregion' in selection criteria step with set of 4 values while designing a frame in cockpit. Now i'm able to see field 'zregion' in drilldown setting option(left side pane of characterstics) and then dragged to right side pane for allowing drill down in frame. Next at presentation mode of frame(cockpit), in for month wise(x-axis,chart type: colon chart) able to see with two expenses. After that i want to drll down on expenses using "parameters" option, it displays list of regions for drill-down. But if i selected any region, it won't show respective regionwise expenses. How can i achieve this?
    thanks,
    naresh

  • Unable to  drill down and see the options in  DBACOCKPIT

    Hi All;
    I am unable to drill down any of the options in DBA COCKPIT.i am able to view st03,st04 and database backup is fine even in db13.Let me know what can be done to to do configuration of DBA COCKPIT and if i click configuration am unable to do anything with active and inactive systems
    Below is the error am getting::
    Object CL_DB6_SYS: Method call GET_FIRST_AVAILABLE_SYSTEM failed with return code = System not found.
    Message no. DB6PM001
    Regards
    Ram

    Hi, Make sure you have the latest DBA Cockpit Collection version installed via transaction => snote.
    1456402 DBA Cockpit Correction Collection SAP Basis 7.02 / 7.30
    regards

  • Reporting Services Error after Interactive sorting and drill down in pps

    Hi 
    i have a report  that has a drill down option that shows all workgroups within a specific  parent group and an interactive sorting ass well on both columns  parent group &  workgroup 
    This is displayed  in pps combined with a SharePoint
    ---the problem is that after sorting the parent group column by name   i then press the drill through icon  (+) next to it hopping to see all workgroups related to each parent group
      - but instead 
    i receive this Reporting Services Error  :
    The value for parameter 'SortItem' is not specified. It is either missing from the function call, or it is set to null. (rsMissingParameter) Get
    Online Help       
    If I don't press the sorting and just drill through it works fine. the sorting itself also works fine. 
    any suggestions ?
     

    Hi Hyaron,
    I am unable to reproduce the issue in my test environment. How did you add the drilldown feature? Were you doing that by setting visibility of the column or of the group? Please ensure to add the drilldown functionality by set the visibility of the workgroup
    from the Grouping Pane in the Report Designer.
    How did you add the Interactive Sorting on the headers of the two columns? Based on the drilldown functionality, the Interactive Sorting on the second column doesn’t work. So, you can move the Interactive Sorting on the second column. When configuring the
    Interactive sorting on the first column, you should set the parent group to sort, and sort by the field that the parent group groups by.
    Hope this helps.
    Regards,
    Mike Yin
    TechNet Community Support

  • Drill Down between 2 stacked column chart with multiple rows.

    Hi,
    Can anyone please help me.
    1) i have to create stacked column chart with Region and cout of calls for previous 3 quarters.
    2) the 2nd stacked column should display the priority with the count of calls for the respective selection of region on the 1st chart..
    to achieve this,
    i'm using 2 stacked column charts and 1 lebel baseb menu.
    from this i can able to get the drill down from label based menu to 2nd stacked column chart but i couldn't able to done the same from 1st stacked coumn chart.
    Becoz my data is multiple row for each quarter.
    please suggest me to achieve the drill down between 2 stacked column charts.
    assume that my data like below.:
    coulmns for 1st stacked column chart : Region, Q2,Q3 &Q4
    Region                Q2                Q3               Q4
    Other              3658              3497               497
    NA - North
    America                3               3               1101
    APJK     1     4     597
    UK               324
    EMEA North     1     1     288
    CORPORATE     1     5     215
    LA -
    Latin America1     2     208
    EMEA     1          199
    EMEA South     1     1     169
    Coulmns for 2nd coumn chart:  Region, Priority, Q2,Q3,Q4 ()which is derived from 1st table.
    Region     Priority     Q2     Q3     Q4
    Other     D: End of Next Day     1568     1613     239
    Other     C: End of Day     983     893     119
    Other     A: 2 Hour     631     610     70
    Other     B: 4 Hour     396     318     56
    NA -
    North AmericaD: End of Next Day     2     2     514
    APJK     D: End of Next Day          3     297
    NA -
    North AmericaC: End of Day               284
    NA -
    North AmericaA: 2 Hour     1          170
    UK     D: End of Next Day               157
    APJK     C: End of Day     1     1     152
    Other     E: 3 - 5 Business Days     68     58     13
    EMEA North     D: End of Next Day          1     136
    CORPORATE     D: End of Next Day          4     107
    NA - North America     B: 4 Hour          1     104
    LA - Latin America     D: End of Next Day     1     1     86
    EMEA     D: End of Next Day               86
    UK     C: End of Day               85
    APJK     A: 2 Hour               79
    EMEA South     D: End of Next Day               72
    EMEA North     A: 2 Hour               69
    EMEA North     C: End of Day               56
    APJK     B: 4 Hour               55
    EMEA     C: End of Day     1          53
    LA - Latin America     C: End of Day               54
    UK     A: 2 Hour               49
    EMEA South     C: End of Day     1          44
    CORPORATE     A: 2 Hour          1     43
    CORPORATE     C: End of Day               44
    LA - Latin America     A: 2 Hour          1     42
    EMEA South     A: 2 Hour          1     32
    EMEA     B: 4 Hour               30
    UK     B: 4 Hour               30
    EMEA     A: 2 Hour               27
    EMEA North     B: 4 Hour     1          26
    NA -
    North AmericaE: 3 - 5 Business Days               25
    LA - Latin America     B: 4 Hour               23
    EMEA South     B: 4 Hour               20
    CORPORATE     B: 4 Hour               17
    APJK     E: 3 - 5 Business Days               13
    Other     F: 6 - 10 Business Days     6     4     
    Other     G: 11 - 20 Business Days     6     1

    Hi Srinivas,
    I'm using label based menu "filterd rows" only but i couldn't bind the drill down with the 1st stacked column chart.
    for mor details:
    1) i'm having 2 stacked coumn charts & 1 lebel based menu but eventhough i couldn't able to achieve.
    if i select the lebel based values then the 2nd stacked column charts is giving detailed valus but if i keep my mouse on the 1st stacked column chart the there is no changes on the 2nd chart..
    somewhere i'm mising the binding data between 1st stacked coumn chart & lebel based menu on drill down part.
    Becoz i'm having multiple rows. so can you please try your and send me the xlf file using your concept.

  • Not able to drill down S_ALR_87013558 in reports

    Hello Experts,
    I am in strange situation where in I am not able to drill down my budget report S_ALR_87013558 in my development client. But it is working fine in production client.
    What could be the reason.?
    Please suggest.
    Thanks,
    Kumar Srinivasan

    Hi Kumar,
    Follow below steps in sequence.
    1. Please execute CJE2.
    2. Double Click on report 12KST1A. Message will come "You are changing an SAP delivery object". Press the tick mark.
    3. On Output Type tab, you must have clicked on radio button "Graphical Report Output". Please change the radio button classical drilldown and check "Available on Selection Screen" at the buttom.
    4. Save it.
    Check your report again and you will have an option there.
    Regards,
    Amit

  • Help required on drill down ...

    I have a report generated on a multiprovider. I run the query to generate the web report on that multiprovider. My problem is If i want to drill down to document level, the data are not tallying before and after drill down.
    What are the possible remedies for this ? Hope for an quick reply,
    thanking you in advance
    D Bret

    Dave,
    You could try the Analysis Process Designer for the same, that might give you a better picture of your joins.
    Also the reason your data might not tally could be because of incorrect joins.
    Arun

  • Alv : drill down not working.

    Hi All,
    Could you please tell me whats wrong with this code ? its not drilling down to show 'ebeln' with me22n.  Am I missing something ?
    Please help.
    Hrishi
    code is :-
    REPORT  Z_VENDOR_BACKORDER_REPORT_ALV .
    TABLES:  EKKO, LFA1, MAKT, EKET, EKPO, AFPO, MARC.
    *Data Declaration
    DATA:  BEGIN OF ITAB OCCURS 0 ,
            ebeln       LIKE ekko-ebeln  ,  " PO number
            aedat       LIKE ekko-aedat  ,  " creation date
            ebelp       LIKE ekpo-ebelp  ,  " item no
            lifnr       LIKE ekko-lifnr  ,  " vendor number
            name1       LIKE lfa1-name1  ,  " vendor name
            RESWK       LIKE EKKO-RESWK  ,  " PLANT NO
            MEMORY      LIKE EKKO-MEMORY , " ORDER INCOMPLETE
            matnr       LIKE ekpo-matnr  ,  " material number
            werks       like ekpo-werks  ,  " plant
            txz01       LIKE ekpo-txz01  ,  " material description
            eindt       LIKE eket-eindt  ,  " Promised date
            menge       LIKE eket-menge  ,  " quantity
            wemng       LIKE eket-wemng  ,  " delivered quantity
            netpr       like ekpo-netpr  ,  " value in AUD
            peinh       like ekpo-peinh  ,  " price unit
            banfn       like ekpo-banfn  ,  " PR no
            aufnr       like ebkn-aufnr  ,  " Production order no
            MAABC       LIKE MARC-MAABC  ,  " MATERIAL ABC Indicator
            maktx       like makt-maktx  ,  " material long description
            open_quant  type p decimals 2,  " quantity - delivered
            VALUE       TYPE p decimals 2,  " $ VALUE * OPEN QUANTITY
            end of ITAB.
    data: wa like itab.
    DATA: bdcdata LIKE bdcdata OCCURS 0 WITH HEADER LINE.
    DATA: TEMP TYPE EKKO-LIFNR.
    data: opt like CTU_PARAMS.
    *DATA:  WA TYPE FINAL.
    all ALV declarations
    type-pools: slis.                                 "ALV Declarations
    DATA:   fieldcatalog        TYPE slis_t_fieldcat_alv with header line,
            G_REPID             TYPE SY-REPID,
            GS_PRINT            TYPE SLIS_PRINT_ALV,
            GT_LIST_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER,
            GT_EVENTS           TYPE SLIS_T_EVENT,
            GT_SORT             TYPE SLIS_T_SORTINFO_ALV,
            GS_LAYOUT           TYPE SLIS_LAYOUT_ALV,
            COL_POS TYPE I.
    -----------------SELECTION SCREEN----------------------
      selection-screen begin of block b1 with frame title text-001.
      select-options VENDORNO for ekko-lifnr.
      select-options MATERIAL for ekpo-matnr.
      SELECT-OPTIONS PLANT FOR EKKO-RESWK.
      select-options REQDAT for eket-eindt.
      selection-screen end of block b1.
    *................... GET DATA..................
    START-OF-SELECTION.
    PERFORM GATHER_DATA.
    END-OF-SELECTION.
    FORM USER_COMMAND USING r_ucomm LIKE sy-ucomm
    rs_selfield TYPE slis_selfield.
    CASE r_ucomm.
    WHEN '&IC1'.
    CASE  rs_selfield-sel_tab_field.
    WHEN 'ITAB-EBELN'.
    CHECK NOT rs_selfield-value IS INITIAL.
    SET PARAMETER ID 'BUS' FIELD rs_selfield-value.
    CALL TRANSACTION 'ME22N' AND SKIP FIRST SCREEN.
    Do something at 'Sales document type' field selection
    when 'ITAB-MATNR'.
    SET PARAMETER ID 'BUS' FIELD rs_selfield-value.
    CALL TRANSACTION 'MD04' AND SKIP FIRST SCREEN.
    ENDCASE.
    ENDCASE.
    ENDFORM.
    form gather_data.
    SELECT EKKO~EBELN
           EKKO~AEDAT
           EKKO~LIFNR
          EKKO~MEMORY
          EKKO~RESWK
           EKPO~EBELP
           EKPO~MATNR
           ekpo~werks
           ekpo~netpr
           ekpo~peinh
           ekpo~banfn
           ekpo~txz01
          makt~maktx
           EKET~EINDT
           EKET~MENGE
           EKET~WEMNG
           LFA1~NAME1
    INTO corresponding fields of ITAB
    FROM (
    EKKO inner JOIN EKPO
    ON EKKOEBELN = EKPOEBELN
    inner JOIN EKET
    ON EKPOEBELN = EKETEBELN
    AND EKPOEBELP = EKETEBELP
    inner JOIN LFA1
    ON EKKOLIFNR = LFA1LIFNR
    *left outer join makt
    *on ekpomatnr = maktmatnr
    WHERE EKKO~LIFNR IN VENDORNO
    AND EKKO~RESWK IN PLANT
    and EKPO~MATNR IN MATERIAL
    and ekpo~elikz eq ' '
    and ekpo~loekz ne 'L'
    and eket~eindt in REQDAT.
    append itab.
    CLEAR ITAB.
    endselect.
    clear temp.
    sort itab by lifnr.
    loop at itab .
    ITAB-OPEN_QUANT = ITAB-MENGE - ITAB-WEMNG.
    if itab-matnr eq ''.
    select single aufnr from ebkn into itab-aufnr where banfn = itab-banfn.
      select single matnr from afpo into itab-matnr where aufnr = itab-aufnr.
    endif.
    select single maktx from makt into itab-maktx where matnr = itab-matnr.
    select single maabc from MARC INTO ITAB-MAABC WHERE MATNR = ITAB-MATNR.
    ITAB-VALUE = ITAB-NETPR * ITAB-OPEN_QUANT / itab-peinh.
    modify itab.
    endloop.
    SKIP.
      fieldcatalog-tabname = 'ITAB'.
      fieldcatalog-fieldname   = 'LIFNR'.
      fieldcatalog-seltext_m   = 'vendor no'.
      fieldcatalog-col_pos     = 1.
      fieldcatalog-outputlen   = 15.
       fieldcatalog-inttype = 'C'.
      fieldcatalog-emphasize   = 'X'.
      fieldcatalog-key         = 'X'.
    fieldcatalog-do_sum      = 'X'.
      fieldcatalog-no_zero     = 'X'.
      append fieldcatalog to fieldcatalog.
        clear  fieldcatalog.
    fieldcatalog-tabname = 'ITAB'.
      fieldcatalog-fieldname   = 'EBELN'.
      fieldcatalog-seltext_m   = 'po Number'.
      fieldcatalog-col_pos     = 2.
       fieldcatalog-inttype = 'C'.
       fieldcatalog-emphasize = 'C401'.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
    fieldcatalog-tabname = 'ITAB'.
      fieldcatalog-fieldname   = 'AEDAT'.
      fieldcatalog-seltext_m   = 'po date'.
      fieldcatalog-col_pos     = 3.
       fieldcatalog-inttype = 'C'.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
    fieldcatalog-tabname = 'ITAB'.
    fieldcatalog-fieldname   = 'EBELP'.
      fieldcatalog-seltext_m   = 'item number'.
      fieldcatalog-col_pos     = 4.
       fieldcatalog-inttype = 'C'.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
    fieldcatalog-tabname = 'ITAB'.
      fieldcatalog-fieldname   = 'MATNR'.
       fieldcatalog-no_zero     = 'X'.
      fieldcatalog-seltext_m   = 'material number'.
      fieldcatalog-col_pos     = 5.
       fieldcatalog-inttype = 'C'.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
    fieldcatalog-tabname = 'ITAB'.
      fieldcatalog-fieldname   = 'MAABC'.
      fieldcatalog-seltext_m   = 'material type'.
      fieldcatalog-col_pos     = 6.
       fieldcatalog-inttype = 'C'.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
    fieldcatalog-tabname = 'ITAB'.
      fieldcatalog-fieldname   = 'TXZ01'.
      fieldcatalog-seltext_m   = 'short text'.
      fieldcatalog-col_pos     = 7.
       fieldcatalog-inttype = 'C'.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
    fieldcatalog-tabname = 'ITAB'.
      fieldcatalog-fieldname   = 'MAKTX'.
      fieldcatalog-seltext_m   = 'long text'.
      fieldcatalog-col_pos     = 8.
       fieldcatalog-inttype = 'C'.
       fieldcatalog-outputlen   = 15.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
    fieldcatalog-tabname = 'ITAB'.
    fieldcatalog-fieldname   = 'EINDT'.
      fieldcatalog-seltext_m   = 'date promised'.
      fieldcatalog-col_pos     = 9.
       fieldcatalog-inttype = 'C'.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
    fieldcatalog-tabname = 'ITAB'.
      fieldcatalog-fieldname   = 'MENGE'.
      fieldcatalog-seltext_m   = 'Quantity'.
      fieldcatalog-col_pos     = 10.
       fieldcatalog-inttype = 'C'.
      fieldcatalog-outputlen   = 15.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
    fieldcatalog-tabname = 'ITAB'.
      fieldcatalog-fieldname   = 'WEMNG'.
      fieldcatalog-seltext_m   = 'Delivered'.
      fieldcatalog-col_pos     = 11.
       fieldcatalog-inttype = 'C'.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
    fieldcatalog-tabname = 'ITAB'.
      fieldcatalog-fieldname   = 'OPEN_QUANT'.
      fieldcatalog-seltext_m   = 'Open quantity'.
      fieldcatalog-col_pos     = 12.
       fieldcatalog-inttype = 'C'.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
    fieldcatalog-tabname = 'ITAB'.
    fieldcatalog-fieldname   = 'VALUE'.
      fieldcatalog-seltext_m   = '$ value'.
      fieldcatalog-col_pos     = 13.
       fieldcatalog-inttype = 'C'.
       fieldcatalog-do_sum      = 'X'.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
    call function 'REUSE_ALV_GRID_DISPLAY'
           exporting
                i_callback_program      = g_repid
                 I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
                it_fieldcat             = fieldcatalog[]
                is_layout               = GS_layout
                  IT_SORT                = gt_sort
                  I_DEFAULT = 'X'
                    I_SAVE = 'X'
               is_variant              = z_template
           tables
                t_outtab                = ITAB
                exceptions
                program_error           = 1
                others                  = 2.
    endform.

    hi,
    please run the code below.
    REPORT yfi7g_ing_mic_001 .
    *PROGRAM YFI7G_ING_MIC_001.
    TABLES: vbak .
    TABLES: mara .
    TYPES: BEGIN OF tp_vbak ,
          vbeln TYPE vbak-vbeln,
          erdat TYPE vbak-erdat,
          erzet TYPE vbak-erzet,
          ernam TYPE vbak-ernam,
          vbtyp TYPE vbak-vbtyp,
          trvog TYPE vbak-trvog,
          auart TYPE vbak-auart,
          lifsk TYPE vbak-lifsk,
          faksk TYPE vbak-faksk,
          waerk TYPE vbak-waerk,
          vkorg TYPE vbak-vkorg,
          kunnr TYPE vbak-kunnr,
          vgbel TYPE vbak-vgbel,
          vgtyp TYPE vbak-vgtyp,
    END OF tp_vbak .
    TYPES: BEGIN OF tp_mara ,
            matnr TYPE mara-matnr,
    END OF tp_mara .
    TYPES: BEGIN OF tp_alv1_data.
    INCLUDE TYPE tp_vbak .
    TYPES: END OF tp_alv1_data.
    TYPES: BEGIN OF tp_alv2_data.
    INCLUDE TYPE tp_mara .
    TYPES: END OF tp_alv2_data.
    TYPE-POOLS: slis.
    DATA: gt_vbak TYPE STANDARD TABLE OF tp_vbak WITH HEADER LINE.
    DATA: gt_mara TYPE STANDARD TABLE OF tp_mara WITH HEADER LINE.
    DATA: gs_variant LIKE disvariant.
    DATA: gt_alv1_data TYPE STANDARD TABLE OF tp_alv1_data WITH HEADER LINE.
    DATA: gt_alv2_data TYPE STANDARD TABLE OF tp_alv2_data WITH HEADER LINE.
    SELECTION-SCREEN                                                     *
    BLOCK b0                                                             *
    SELECTION-SCREEN BEGIN OF BLOCK b0 WITH FRAME.
    SELECT-OPTIONS: s_vbeln FOR vbak-vbeln.        "<field not defined?>
    PARAMETERS: p_matnr LIKE mara-matnr.           "<field not defined?>
    SELECTION-SCREEN END OF BLOCK b0.
    BLOCK bvar                                                           *
    SELECTION-SCREEN BEGIN OF BLOCK bvar WITH FRAME.
    PARAMETERS: p_vari  LIKE disvariant-variant.
    SELECTION-SCREEN END OF BLOCK bvar.
    BLOCK bbox                                                           *
    SELECTION-SCREEN BEGIN OF BLOCK bbox WITH FRAME.
    PARAMETERS: p_box_up  RADIOBUTTON GROUP b1,
                p_box_do  RADIOBUTTON GROUP b1 DEFAULT 'X',
                p_box_no  RADIOBUTTON GROUP b1.
    SELECTION-SCREEN END OF BLOCK bbox.
          AT SELECTION-SCREEN ON P_VARI                                 *
    AT SELECTION-SCREEN ON p_vari.
      PERFORM alv_variant_existence USING    p_vari
                                    CHANGING gs_variant.
          AT SELECTION-SCREEN ON VALUE REQUEST FOR P_VARI               *
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
      PERFORM alv_variant_f4 CHANGING p_vari
                                      gs_variant.
    INITIALIZATION                                                       *
    INITIALIZATION.
    START-OF-SELECTION                                                   *
    START-OF-SELECTION.
      PERFORM authority_check.
      PERFORM get_control_data.
      PERFORM get_transaction_data.
      PERFORM process_transaction_data.
    END-OF-SELECTION                                                     *
    END-OF-SELECTION.
      PERFORM output_data.
    F   O   R   M   S                                                   *
          FORM AUTHORITY_CHECK                                          *
          Perform authority checks for the report                       *
    FORM authority_check.
    !!! Note: authorisation checks are application-dependent.
    !!! Some common cases are listed below - please select one of them
    !!! or add new authorisation checks.
    !!! If the report is creating batch input session or using LDB
    !!! it may be sufficient to use automatic SAP auth.checks.
    Authorisation for displaying documents in a single company code
    authority-check object 'F_BKPF_BUK'
           id 'BUKRS' field p_bukrs
           id 'ACTVT' field '03'.
    if sy-subrc <> 0.
      message e001(z9) with 'No authorisation to display documents'
                            'in company code' p_bukrs.
    endif.
    Displaying documents from a list of company codes (select-options)
    call function 'Y_BUKRS_AUTHORITY_CHECK'
       EXPORTING
            ACTVT     = '03'
            NOMESSAGE = ' '
       tables
            s_bukrs   = s_bukrs.
    ENDFORM.                              " AUTHORITY_CHECK
          FORM GET_CONTROL_DATA                                         *
          Read configuration etc.                                       *
    FORM get_control_data.
    ENDFORM.                               " GET_CONTROL_DATA
          FORM GET_TRANSACTION_DATA                                     *
          Read documents etc.                                           *
    FORM get_transaction_data.
    !!! Data selection statement below has been generated automatically.
    !!! Please check if it is correct and complete.
    !!! Use table joins or 'SELECT FOR ALL ENTRIES' when selecting data
    !!! from related tables.
      SELECT
                vbeln
                erdat
                erzet
                ernam
       FROM vbak
          INTO CORRESPONDING FIELDS OF TABLE gt_vbak
      CHECK NOT gt_vbak[] IS INITIAL.
      SELECT
                matnr
       FROM mara
          INTO CORRESPONDING FIELDS OF TABLE gt_mara
          FOR ALL ENTRIES IN gt_vbak
          WHERE ernam = gt_vbak-ernam
    ENDFORM.                               " GET_TRANSACTION_DATA
          FORM PROCESS_TRANSACTION_DATA                                 *
    FORM process_transaction_data.
      LOOP AT gt_vbak .
        MOVE-CORRESPONDING gt_vbak TO gt_alv1_data .
        APPEND gt_alv1_data .
      ENDLOOP.
      FREE gt_vbak .
      LOOP AT gt_mara .
        MOVE-CORRESPONDING gt_mara TO gt_alv2_data .
        APPEND gt_alv2_data .
      ENDLOOP.
      FREE gt_mara .
    ENDFORM.                               " PROCESS_TRANSACTION_DATA
          FORM OUTPUT_DATA                                              *
    FORM output_data.
      PERFORM alv_list_display.
    ENDFORM.                               " OUTPUT_DATA
          FORM DISPLAY_RECORD                                           *
          Display object associated with the current ALV line           *
    FORM display_record USING is_selfield TYPE slis_selfield.
      READ TABLE gt_alv1_data INDEX is_selfield-tabindex.
      CHECK sy-subrc = 0.
    !!! SAMPLE IMPLEMENTATION FOR DISPLAYING FI DOCUMENTS:
      SET PARAMETER ID 'BUK' FIELD gt_alv1_data-vbeln.
    set parameter id 'BLN' field gt_alv1_data-belnr.
    set parameter id 'GJR' field gt_alv1_data-gjahr.
      CALL TRANSACTION 'FB03' AND SKIP FIRST SCREEN.
    ENDFORM.                               " DISPLAY_RECORD
          FORM ALV_LIST_DISPLAY                                         *
          Invoke main ALV function to format and show the report        *
    FORM alv_list_display.
      DATA: ls_layout      TYPE slis_layout_alv,
            ls_print       TYPE slis_print_alv,
            ls_keyinfo     TYPE slis_keyinfo_alv,
            lt_fieldcat    TYPE slis_t_fieldcat_alv,
            lt_exctab      TYPE slis_t_extab,
            lt_sorttab     TYPE slis_t_sortinfo_alv,
            lt_events      TYPE slis_t_event.
      PERFORM alv_init_report_events TABLES   lt_events.
      PERFORM alv_init_report_layout TABLES   lt_fieldcat
                                              lt_exctab
                                              lt_sorttab
                                     CHANGING ls_layout
                                              ls_print
                                              ls_keyinfo.
      CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
        EXPORTING
          i_interface_check        = ' '
          i_callback_program       = sy-cprog
          is_layout                = ls_layout
          it_fieldcat              = lt_fieldcat
          it_excluding             = lt_exctab
        IT_SPECIAL_GROUPS        =
          it_sort                  = lt_sorttab
        IT_FILTER                =
        IS_SEL_HIDE              =
        I_SCREEN_START_COLUMN    = 0
        I_SCREEN_START_LINE      = 0
        I_SCREEN_END_COLUMN      = 0
        I_SCREEN_END_LINE        = 0
        I_DEFAULT                = 'X'
          i_save                   = 'A'
          is_variant               = gs_variant
          it_events                = lt_events
        IT_EVENT_EXIT            =
          i_tabname_header         = 'GT_ALV1_DATA'
          i_tabname_item           = 'GT_ALV2_DATA'
        I_STRUCTURE_NAME_HEADER  =
        I_STRUCTURE_NAME_ITEM    =
          is_keyinfo               =  ls_keyinfo
          is_print                 =  ls_print
        IS_REPREP_ID             =
      IMPORTING
        E_EXIT_CAUSED_BY_CALLER  =
        ES_EXIT_CAUSED_BY_USER   =
        TABLES
          t_outtab_header          = gt_alv1_data
          t_outtab_item            = gt_alv2_data.
      EXCEPTIONS
        PROGRAM_ERROR            = 1
        OTHERS                   = 2
    ENDFORM.                           " ALV_LIST_DISPLAY
          FORM ALV_INIT_REPORT_LAYOUT                                   *
          Set up report layout definition for ALV_LIST_DISPLAY          *
    <-- OT_FIELDCAT list of fields                                     *
    <-- OT_EXCTAB   excluded menu options                              *
    <-- OT_SORTTAB  sorting/grouping definition                        *
    <-- OS_LAYOUT   global report layout settings                      *
    <-- OS_PRINT    global report printout settings                    *
    <-- OS_KEYINFO  itab key fields (required only for hier.lists)     *
    FORM alv_init_report_layout TABLES ot_fieldcat TYPE slis_t_fieldcat_alv
                                       ot_exctab   TYPE slis_t_extab
                                       ot_sorttab  TYPE slis_t_sortinfo_alv
                              CHANGING cs_layout   TYPE slis_layout_alv
                                       cs_print    TYPE slis_print_alv
                                       cs_keyinfo  TYPE slis_keyinfo_alv.
    add menu items to be excluded to ot_exctab.
      REFRESH ot_exctab.
      REFRESH ot_fieldcat.
      REFRESH ot_sorttab.
    !!! List all ALV data fields for display here:
    DD-struct  = data dictionary structure name
    DD-field   = field of data dictionary structure
    itab       = internal table for output data
    itab-field = internal table field name
    key        = set to 'X' if key field
    sum        = set to 'X' for totals
    hid        = set to 'X' if field is initially hidden
    row        = list row number (multi-line list if >1)
    DD-struct    DD-field     itab         itab-field  key sum hid row
      PERFORM alv_build_fieldcat TABLES ot_fieldcat USING:
    'VBAK'       'VBELN'      'GT_ALV1_DATA' 'VBELN'     ' ' ' ' ' ' 1 ,
    'VBAK'       'ERDAT'      'GT_ALV1_DATA' 'ERDAT'     ' ' ' ' ' ' 1 ,
    'VBAK'       'ERZET'      'GT_ALV1_DATA' 'ERZET'     ' ' ' ' ' ' 1 ,
    'VBAK'       'ERNAM'      'GT_ALV1_DATA' 'ERNAM'     ' ' ' ' ' ' 1.
      PERFORM alv_build_fieldcat TABLES ot_fieldcat USING:
    'MARA'       'MATNR'      'GT_ALV2_DATA' 'MATNR'     ' ' ' ' ' ' 1 .
    !!! List all ALV data fields for sorting/grouping here
    itab       = internal table for output data
    itab-field = internal table field name
    up         = sort ascending
    down       = sort descending
    grp        = group by
    comp       = group initially compressed
    pos        = field position in sort sequence
    itab                   field              up down grp comp        pos
      PERFORM alv_build_sorttab TABLES ot_sorttab USING:
    'GT_ALV1_DATA'         'VBELN'             'X' ' ' ' ' ' '           1.
      PERFORM alv_build_sorttab TABLES ot_sorttab USING:
    'GT_ALV2_DATA'         'MATNR'             'X' ' ' ' ' ' '           1.
    !!! key definition - required only for hierarchical display (2 itabs)
      cs_keyinfo-header01 = 'VBELN' .
      cs_keyinfo-item01   = 'MATNR' .
    !!! See the declaration of type SLIS_LAYOUT_ALV and set the fields
    !!! of OS_LAYOUT record to change list-level attributes
    os_layout-no_colhead     = 'X'.         " no headings
      cs_layout-zebra          = 'X'.         " stripped pattern
    os_layout-no_vline       = 'X'.         " columns separated by space
    os_layout-totals_only    = 'X'.         " show only totals
    os_layout-totals_text    = 'Total'.     " totals line label
    os_layout-subtotals_text = 'Subtotal'.  " subtotals line label
    os_layout-subtotals_text = 'Subtotal'.  " subtotals line label
    os_layout-key_hotspot    = 'X'.         " keys as hotspot
    os_layout-expand_all     = 'X'.         " Expand all positions
    os_layout...
      cs_print-no_print_selinfos = 'X'.       " Skip selection statistics
      cs_print-no_print_listinfos = 'X'.      " Skip list statistics
    os_print-...
    ENDFORM.                               " INIT_REPORT_LAYOUT
          FORM ALV_BUILD_FIELDCAT                                       *
          Format a single line for ALV_INIT_REPORT_LAYOUT               *
    FORM alv_build_fieldcat TABLES ot_fieldcat
                            USING  iv_ref_tabname   "ref to a table/field
                                   iv_ref_fieldname
                                   iv_tabname     "actual table/field name
                                   iv_fieldname
                                   iv_key
                                   iv_do_sum
                                   iv_no_out
                                   iv_row_pos.
    status variables for auto-numbering of field column position
    (column number reset when a new table or row begins)
      STATICS: sv_last_tabname TYPE slis_tabname,
               sv_last_row_pos TYPE i,
               sv_current_col  TYPE i.
      IF sv_last_tabname <> iv_tabname OR sv_last_row_pos <> iv_row_pos.
        sv_current_col = 1.
      ELSE.
        ADD 1 TO sv_current_col.
      ENDIF.
      sv_last_tabname = iv_tabname.
      sv_last_row_pos = iv_row_pos.
      DATA: ls_fieldcat    TYPE slis_fieldcat_alv.
      DATA: lv_fieldname   TYPE slis_fieldname.
      lv_fieldname = iv_fieldname.
    !!! List all the special formatting requirements in cases below
    case lv_fieldname.
      when 'WRBTR'.                      "<-- link with currency required
        ls_fieldcat-cfieldname = 'WAERS'.
        ls_fieldcat-ctabname   = iv_tabname.
      when 'HKONT'.                     "<-- change default column header
        ls_fieldcat-seltext_s  = 'GL Acc.'.
        ls_fieldcat-ddictxt    = 'S'.          " (S)hort (M)iddle (L)ong
      when 'SOME_NUMBER'                 "<-- change number formatting
        ls_fieldcat-nosign     = 'X'.
        ls_fieldcat-nozero     = 'X'.
        ls_fieldcat-just       = 'L'.         " (L)eft (R)ight (C)enter
    endcase.
      ls_fieldcat-ref_tabname   = iv_ref_tabname.
      ls_fieldcat-ref_fieldname = iv_ref_fieldname.
      ls_fieldcat-tabname       = iv_tabname.
      ls_fieldcat-fieldname     = iv_fieldname.
      ls_fieldcat-key           = iv_key.
      ls_fieldcat-do_sum        = iv_do_sum.
      ls_fieldcat-no_out        = iv_no_out.
      ls_fieldcat-row_pos       = iv_row_pos.
      ls_fieldcat-col_pos       = sv_current_col.
      APPEND ls_fieldcat TO ot_fieldcat.
    ENDFORM.                          " ALV_BUILD_FIELDCAT
          FORM ALV_BUILD_SORTTAB                                        *
          Set up sorting information for ALV_INIT_REPORT_LAYOUT         *
    FORM alv_build_sorttab TABLES ot_sorttab TYPE slis_t_sortinfo_alv
                           USING  iv_tabname   TYPE slis_fieldname
                                  iv_fieldname TYPE slis_fieldname
                                  iv_up        TYPE c
                                  iv_down      TYPE c
                                  iv_subtot    TYPE c
                                  iv_comp      TYPE c
                                  iv_spos      TYPE n.
      ot_sorttab-spos      = iv_spos.
      ot_sorttab-fieldname = iv_fieldname.
      ot_sorttab-tabname   = iv_tabname.
      ot_sorttab-up        = iv_up.
      ot_sorttab-down      = iv_down.
      ot_sorttab-subtot    = iv_subtot.
      ot_sorttab-comp      = iv_comp.
      APPEND ot_sorttab.
    ENDFORM.                            " ALV_BUILD_SORTTAB
          FORM ALV_INIT_REPORT_EVENTS                                   *
          Set up program events for ALV_LIST_DISPLAY                    *
    <-- OT_EVENTS   list of events and associated report subroutines   *
    FORM alv_init_report_events TABLES ot_events TYPE slis_t_event.
      CLEAR   ot_events.
      REFRESH ot_events.
      ot_events-name = slis_ev_user_command.
      ot_events-form = 'USER_COMMAND'.
      APPEND ot_events.
      ot_events-name = slis_ev_pf_status_set.
      ot_events-form = ''.                         "'PF_STATUS_SET'.
      APPEND ot_events.
      ot_events-name = slis_ev_top_of_list.
      ot_events-form = 'TOP_OF_LIST'.
      APPEND ot_events.
      ot_events-name = slis_ev_end_of_list.
      ot_events-form = 'END_OF_LIST'.
      APPEND ot_events.
      ot_events-name = slis_ev_top_of_page.
      ot_events-form = 'TOP_OF_PAGE'.
      APPEND ot_events.
      ot_events-name = slis_ev_end_of_page.
      ot_events-form = 'END_OF_PAGE'.
      APPEND ot_events.
      ot_events-name = slis_ev_foreign_top_of_page.
      ot_events-form = ''.
      APPEND ot_events.
      ot_events-name = slis_ev_foreign_end_of_page.
      ot_events-form = ''.
      APPEND ot_events.
      ot_events-name = slis_ev_top_of_coverpage.
      ot_events-form = ''.
      APPEND ot_events.
      ot_events-name = slis_ev_end_of_coverpage.
      ot_events-form = ''.
      APPEND ot_events.
      ot_events-name = slis_ev_before_line_output.
      ot_events-form = ''.
      APPEND ot_events.
      ot_events-name = slis_ev_after_line_output.
      ot_events-form = ''.
      APPEND ot_events.
      ot_events-name = slis_ev_caller_exit_at_start.
      ot_events-form = ''.
      APPEND ot_events.
      ot_events-name = slis_ev_list_modify.
      ot_events-form = ''.
      APPEND ot_events.
      ot_events-name = slis_ev_subtotal_text.
      ot_events-form = ''.
      APPEND ot_events.
    ENDFORM.                            " ALV_INIT_REPORT_EVENTS
          FORM USER_COMMAND                                             *
          Subroutine attached as callback form to ABAP List Viewer      *
      --> UCOMM    - user command code passed from ALV                  *
      --> SELFIELD - information record describing current line/field   *
    FORM user_command USING value(iv_ucomm) LIKE sy-ucomm
                            is_selfield     TYPE slis_selfield.
      CASE iv_ucomm.
        WHEN '&IC1'.                                  "ALV record selection
          PERFORM display_record USING is_selfield.
      when ...
      ENDCASE.
    ENDFORM.                               " USER_COMMAND
          FORM PF_STATUS_SET                                            *
          Subroutine attached as callback form to ABAP List Viewer,     *
          allows setting alternative menu.  If necessary:               *
          1. Copy 'STANDARD' menu from SAPLKKBL and modify as required, *
          2. Activate callback                                          *
    FORM pf_status_set USING it_exctab TYPE slis_t_extab.
    set pf-status 'STANDARD' excluding it_exctab.
    ENDFORM.                               " PF_STATUS_SET
          FORM TOP_OF_LIST                                              *
          Subroutine attached as callback form to ABAP List Viewer,     *
          executed once at the start of list output.                    *
    FORM top_of_list.
      DATA: lt_seltab TYPE STANDARD TABLE OF rsparams WITH HEADER LINE.
      DATA: lv_report LIKE sy-repid.
      lv_report = sy-repid.             "do not pass sy-repid to function!
      IF p_box_up = 'X'. "display select options at report start
        CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
          EXPORTING
            curr_report     = lv_report
          TABLES
            selection_table = lt_seltab.
    remove 'technical' parameters with 'DELETE LT_SELTAB WHERE...'
    before display, if necessary
        CALL FUNCTION 'RS_LIST_SELECTION_TABLE'
           EXPORTING
                report        = lv_report
                seltext       = 'X'
            dyn_range     =
                newpage       = ' '
            screennr      = 1000
           TABLES
                sel_tab       = lt_seltab
           EXCEPTIONS
                sel_tab_empty = 1.
      ENDIF. "p_box_up = 'X'
    ENDFORM.                               " TOP_OF_LIST
          FORM END_OF_LIST                                              *
          Subroutine attached as callback form to ABAP List Viewer      *
          executed once at the end of list output.                      *
    FORM end_of_list.
      DATA: lt_seltab TYPE STANDARD TABLE OF rsparams WITH HEADER LINE.
      DATA: lv_report LIKE sy-repid.
      lv_report = sy-repid.             "do not pass sy-repid to function!
      IF p_box_do = 'X'. "display select options at report end
        CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
          EXPORTING
            curr_report     = lv_report
          TABLES
            selection_table = lt_seltab.
    remove 'technical' parameters with 'DELETE LT_SELTAB WHERE...'
    before display, if necessary
        CALL FUNCTION 'RS_LIST_SELECTION_TABLE'
           EXPORTING
                report        = lv_report
                seltext       = 'X'
            dyn_range     =
                newpage       = ' '
            screennr      = 1000
           TABLES
                sel_tab       = lt_seltab
           EXCEPTIONS
                sel_tab_empty = 1.
      ENDIF. "p_box_do = 'X'
    ENDFORM.                               " END_OF_LIST
          FORM TOP_OF_PAGE                                              *
          Subroutine attached as callback form to ABAP List Viewer      *
    FORM top_of_page.
    standard Ingram Micro report page heading
      DATA: lv_coco_pos TYPE i,          "CurPos of 'Company confidential'
            lv_title_pos TYPE i,           "CurPos of report title
            lv_title(70) TYPE c,           "Truncated report title
            lv_page_pos TYPE i,            "CurPos of page number
            lv_date_pos TYPE i,            "CurPos of date and time
            lv_page_no(10) TYPE c,
            lv_date(25) TYPE c,
            lv_time(20) TYPE c,
            lv_page(10) TYPE c.
    We may need to truncate title if the line size is < 81.
      IF sy-linsz < 81.
        lv_title = sy-title+0(50).
      ELSE.
        lv_title = sy-title.
      ENDIF.
    Decide on positioning of text depending on width of page
      lv_title_pos = ( sy-linsz / 2 ) - ( STRLEN( lv_title ) / 2 ).
      lv_coco_pos = sy-linsz - 20.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
      WRITE: / 'Ingram Micro',
               AT lv_title_pos lv_title,
               AT lv_coco_pos 'Company Confidential'.
    Setup data correctly in the correct format for the display fields.
      lv_page = sy-pagno.
      SHIFT lv_page LEFT DELETING LEADING ' '.
      CONCATENATE sy-datum6(2) sy-datum4(2) sy-datum+0(4)
                   INTO lv_date SEPARATED BY '.'.
      CONCATENATE sy-uzeit0(2) ':' sy-uzeit2(2) INTO lv_time.
      CONCATENATE lv_date lv_time INTO lv_date SEPARATED BY ' '.
      CONCATENATE 'Page' lv_page INTO lv_page_no SEPARATED BY ' '.
    Decide on positioning of text depending on width of page.
      lv_page_pos = sy-linsz - ( STRLEN( lv_page_no ) ).
      WRITE: / lv_date,
               AT lv_page_pos lv_page_no.
      ULINE.
    ENDFORM.                               " TOP_OF_PAGE
          FORM END_OF_PAGE                                              *
          Subroutine attached as callback form to ABAP List Viewer      *
    FORM end_of_page.
    ENDFORM.                               " END_OF_PAGE
          Form  ALV_VARIANT_EXISTENCE
          Reads ALV variant definition
    FORM alv_variant_existence  USING    iv_variant LIKE disvariant-variant
                                CHANGING os_variant LIKE disvariant.
      CHECK NOT iv_variant IS INITIAL.
      os_variant-report  = sy-repid.
      os_variant-variant = iv_variant.
      IF iv_variant CP '/*'.    "user-specific variants begin with slash
        os_variant-username = sy-uname.
      ENDIF.
      CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
        EXPORTING
          i_save        = 'A'
        CHANGING
          cs_variant    = os_variant
        EXCEPTIONS
          wrong_input   = 1
          not_found     = 2
          program_error = 3
          OTHERS        = 4.
      IF sy-subrc <> 0.
        MESSAGE e001(z9) WITH 'Please select a valid display variant.'.
      ENDIF.
    ENDFORM.                               " ALV_VARIANT_EXISTENCE
          FORM ALV_VARIANT_F4                                           *
          Display list of layout variants on report selection screen    *
    FORM alv_variant_f4  CHANGING cv_varname  LIKE disvariant-variant
                                  cs_variant  LIKE disvariant.
      DATA: lv_exit(1) TYPE c.
      cs_variant-report = sy-repid.
      CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
           EXPORTING
                is_variant          = cs_variant
                i_save              = 'A'
              it_default_fieldcat =
           IMPORTING
                e_exit              = lv_exit
                es_variant          = cs_variant
           EXCEPTIONS
                not_found = 2.
      IF sy-subrc = 2.
        MESSAGE ID sy-msgid TYPE 'S'      NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ELSE.
        IF lv_exit = space.
          cv_varname = cs_variant-variant.
        ENDIF.
      ENDIF.
    hope this will help.
    see form  user_command.
    regards,
    Ruchika

  • Drill down on all values of a row from bex universe

    Hi
    We had developed BO universe on bex query, and as in web i the whole row will come as a single object.
    so when we drill  on the row the drill is not performing on the whole row rather its happenig on a single value of the row
    Ex:- if we have rows named as US, china, America, Japan, Gross sales, invoice etc
    when wen i drill on any row for lets say US, and i drilled on currecy type the drill is happening only us from the row.
    But we need this drill on whole values of the row,
    if aware of bex analyser, we need the same drill down future as in bex.
    Any help in this regards is appreciable.
    Thanks in Advance,

    Hi,
    Your code seems to be right.
    Try writing the code as the below format.
    CASE SY-UCOMM.
    * CHECK FUNCTION CODE
    WHEN '&IC1'.
    * CHECK FIELD CLICKED ON WITHIN ALVGRID REPORT
    IF SELFIELD-FIELDNAME = 'LIFNR'.
    * READ DATA TABLE, USING INDEX ROW USER CLICKED ON
    READ TABLE IT_FINAL INTO WA_FINAL INDEX SELFIELD-TABINDEX.
    * SET PARAMETER ID FOR TRANSACTION SCREEN FIELD
    SET PARAMETER ID 'BES' FIELD WA_FINAL-LIFNR.
    * EXECUTE TRANSACTION 'XK03',AND SKIP INITIAL DATA ENTRY SCREEN.
    CALL TRANSACTION 'XK03' AND SKIP FIRST SCREEN.
    ENDIF.
    ENDCASE.
    Thanks
    Arbind

Maybe you are looking for