Drill down in pie chart using Business Graphics?

Hi,
I have create a pie chart using business graphics UI element. is it possible to drill down when we click on a part of pie chart?
Please let me know how can we achieve this. Thank you.
Regards,
Bharat.

I got the solution. we can identify this by using the event id property.
Regards,
Bharat.

Similar Messages

Drill Down in Pie Chart not working in IE8 / Mozilla 5

Hi Experts,
In my dashboards, drill down feature in Pie charts are not working if the flash is viewed in IE8 / Mozilla Firefox 5.
In IE7 it is working. Is there any browser settings required for this ? Pls suggest.
Drill down in column chart is working fine.
Xcelsius Version: Xcelsius 2008 SP3 FP 3.5
Browser Version: Firefox 5.0 / IE 8
Many thanks,
PASG

Hi,
You may want to download Xcelsius 2008 with SP4.
SP4 will support the newer IE 8 (32 bits) for Xcelsius related issue.
As for FireFox 5 that came out last week, this won't be supported anytime soon.
Regards,
Ken
Edited by: Ken Low on Jun 27, 2011 8:50 AM

Drill Down in Pie Chart

In Xeelsius 2008 when I click on the Drill Down tab of the Pie Chart then the total tab is in disable mode so unable to add the drill down property.Please suggest me how to proceed

Hi
For default data drill down is disabled.
So to enable drill down, You have to pass the data, present in General tab.
Hope this will solve your Problem.
Regards
Rush-me

Creating Gantt charts using Business Graphics that can be downloaded

The short version is I need the format for XML data to create a Gantt chart in a Business Graphics UI Element in order to be able to automatically email it. The long version is...
I currently have a Web Dynpro ABAP component that displays a Gantt chart using a Business Graphics UI Element based off data in various other UI elements in the view.
This works fine and the graph displays nicely, but I cannot find a way to download that straight from the Business Graphics UI Element. Having read around the forum there appears to be two options:
- Code it up myself by calling methods on the IGS API directly
- Bind the image data attribute on the element and get the data that way
Unfortunatly, we are not currently running a recent enough version (702/720) to be able to do the latter and so, unless there is another way, I need to code up the API calls myself.
So far I have got a business graphic in to an Adobe PDF form, loaded in my config data so it appears as a Gantt chart but I cannot figure out the format for the actual data that needs to be sent through in XML. Does anyone have example XML data or code to generate it that can be sent in to the call:
l_igs_ce->set_data( EXPORTING data_doc = p_ixml_doc ).
I have used the example in GRAPHICS_IGS_CE_TEST and the page http://liualex.com/archives/185 to generate the image and load the config data in but this only explains the XML format of the chart data for bar graphs.
Many thanks

Found my answer,
This download: http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/e0a9ba90-0201-0010-d3a2-9cb376b5e181
This is the SAP Chart Designer, it contains a PDF which explains the XML format used, you can use it to manually create your own XML streams.

Drill down for pie chart is not enabled

hi,
i am trying to have a drill down functionality for a pie chart but when i go to drill down option that screen is not enabled.
how to make drill down option enable.
please let me know
Edited by: venkat s on May 9, 2008 9:36 AM

i just gave yaxis source and x axix source . it is enabling now

Drill down from Pie Chart

Why does the Insert Chart sometimes not give you a drill down capability from the Pie chart

Hi,
Its is possible and please have a look in the below link and it got detail steps
http://www.xcelsiusjournal.com/index.php?option=com_content&task=view&id=67&Itemid=2
Thanks

How to Axis labels for Line charts in Business Graphics

Hi
I am planning to do the Business Graphic example using Line chart.As part of this
i didn't clearly understand what is the perpose of Series,Points,categorys?
if i want to set the Labels at X-axis and y axis ,then how to do that?Baiscally i want to put time related data as X-axis label(20min,30min,60 min etc).Please help.
is there any good example to understand the concept?
Thanks
Prasad

Hi Bachier
Thanks for your repsonce.I had seen the example you suggested.but there is no answer for my question.How to set the x-Axis,Y-axis Labels.I had done example for "line chart".But i have same problem:
Hi
I am trying to do example on "line chart" using Business graphics in my webdynpro application.
In the Context i created Node "A" under which i created "B".then it has value attributes xValue,yValue.Then in View i created BG UI element >Series>point-->NumericValue(for xValue) ,NumericaValue(yValue).Now in view init() method i had initialized values to x and y. some output is coming.but i want to know how to set the X-Axis Label,y-Axis Labels.in X-Aix Label i want to mention time in hrs i.e 8.00,8.30AM,9.00AM,9.30AM etc.as part of y-axis labels i want to mention numeric values( .2,.4,.8,2.0 etc). Please tell me how to set this X-Axis,y-Axis labels.at every 30min(8.00Am,8.30AM etc) user enter quality data(i.e .2 etc) then i want to generate chart.Please help in this regard.i will give very good points
Thanks
Prasad

How to configur Drill down on Bubble Chart

Hi,
Can anyone please hel me with examples - how to confihure drill down on bubble chart.
that means,
1) whenever the user clicking the bubbles - the pop up window should display some notes related to that bubble
and also in another requirement
2) whenever the user click the bubble - the pie chart should display the values related to that bubble.
please help me on achieving the same..

If the Bubble size is constant we can do this.But as you know Bubble sizes varies from once to one place..It will be tough scenario if you want to do it here..Instead take a label based menu and try to use dynamic visiblity .And show labels in there which contains the text for the respective labels..

Drill-Down from several Charts to Same Target

Hi,
we have built a dashboard with 3 (soon to be 6) column charts and one line chart below. The colum charts represent 6 KPIs aggregated for a year for different warehouses. Each warehouse is a specific series (because we want them to have a individual colors). When the user clicks on a warehouse in one of the column charts, we want the line chart above to show the
For this purpose, we have all column charts store drill-down values to the same two cells:
- One cell stores the series name (warehouse selected)
- One cell stores the name of the clicked line chart (we use a single cell with the chart name as source for the first series of each chart. After the first series is selected as the default drill-down, this source and destination seems to be used for every series selected, which might be a bug)
Our problem is, all queries for the charts are loaded at startup. The default drill-downs for all charts are done, and we have a random chart in the drill-down destination. If the user clicks the same chart again, we do not notice this as the value of our target cell does not change. We have tried several solutions for this, but nothing is really satisfactory.
Does any of you have an idea, or a similar dashboard maybe, where the drill-down of several charts (preferably with several series per chart) is stored into a single target chart?
Thanks & Regards,
Sebastian

Hi Sebastian,
You cannot have drill downs from different charts to the same target.
As per your scenario you have 3 column charts with warehouses displaying their respective 3 KPI's values. I believe you would have created a series each for available warehouses. If you have selected drill down on load for all the column charts with one single target then at load all the three column charts will try to place the destination of their selected series(based on warehouse selected) to the same target.
And also as you mentioned when the user tries to select the same chart again the target doesn't change, the reason is the same as all the charts are trying to put the destination of the series in the same cell.
Instead of doing it this way, what you could do is to name the series of all column charts the same and have the series name put into one cell. Then based on this series name you can lookup the data for that warehouse and display it in the line chart.
Here again the user has to select the same warehouse in all the three column charts else it wont work.
Hope this was useful =]
Thanks & Regards
Arjun.C.T

Drill down a bar chart in new window/ browser?

Hi,
Could anyone suggest me how to drill down a bar chart into another bar chart in new window or browser.
I was wondering if anyone had any ideas or know of any examples of how I might do this?
Thank you
Ram

You can use a "javascript:window.open(...)" URL with navigateToURL and pass parameters for the new bar chart in the query string.
Hi,
If you don't mind, Could you please explain me in more detail about "javascript:window.open(...) URL with navigateToURL"
do I need to place it in the Flex code or Java?
Thank you
Ram

Drill down on bubble chart

Hi all,
I am having a bubble column chart. when drill down the bubble chart. one more chart will display. is it possible to open the drill down chart in new window?
& how can I drill down on bubble chart
similar to this report
http://www.recovery.gov/?q=content/investments
Thanks

Priya,
You need to use drill down option in Bubble chart and dynamically display Chart placing it in a Panel container. It is similar to this http://xcelsiusandme.blogspot.com/2009/07/xm-sample-2-pop-up-with-url-button.html
Instead of Report 1 button...have drill down from bubble chart.
-Anil

Problem in dril down in pie chart

Hi Guys,
I´m using a pie chart in a Xcelsius dashboard and a execution error occurred.
Explain:
If I export swf in local machine the drill donw in pie chart ok.
When publish the dashboard in the BW server the drill donw don´t work.
Workstation Configuration
- SBO Xcelsius 2008 SP3 FP3.4
- Flash player 10.1
- IE6
- Firefox 5.0
- Windows 2003
Some idea about this problem?
tks!

Hi Amit,
No error message is displayed.
The drill command don´t work and has no erro message.
Tks
Diógenes

Drill down from the charts of VC

Dear gurus,
   can I realize the functionality of drilling down from the charts of VC?
   For example, I have a bar chart. Can I drill down from each bar of chart to detailed infomation about that bar?
   Please advise. I'll assign points if helpful. Thanks in advance.
Jin Ming

Hi
I hope you will get answer from this solved using pop up window for drill down
Thanks & Regards
Harsimran

Drilling down from OmniPortlet chart to detailed chart in same OmniPortlet?

I am trying to use OmniPortlets to create a dashboard of charts showing different metrics.
I want to be able to drill into each chart to get a more detailed chart in the SAME OmniPortlet frame with all the other charts being unchanged. So if I have 3 OmniPortlet charts C1, C2, C3 in the same page, I want to be able to click on C1 and to be able to drill into C1 (details), C2 and C3.
I am trying to do this through OmniPortlet events, parameters and page parameters.
1) I've defined a OmniPortlet Param1 to parameterize the source of data - So my source URL is http://<URL-base>/##Param1##
2) I then defined a Page Parameter PP1 that is associated with Param1 and set a default value for this (to make sure ##Param1## gets set for the top level chart). I set this default value in the OmniPortlet Parameters page - (otherwise, the ##Param1## seems to map to a null sting despite the Page Parameter PP1's default value)
3) Finally, I defined an OmniPortlet event that gets fired when I click on the chart. The Event sets as one of its parameters, the data source that has the drilldown data. This column name is PP1.
So, the chart should first display with the data source URL being initialized from the Page Parameter. When I click on the chart, the Event should set up a new parameterized value in the data source so that next chart with drill down data is shown after a page refresh.
The reality is different from this theory. When I click on the chart, for some reason, the value of Param1 for refreshed Omniportlet display seems to be getting blanked out. So my chart definition gets messed up since the data source is now invalid. The page however continues displaying the original (pre-drill) chart from the cache.
2)
I don't know whether this problem is because of an improper use of the Page Parameters and OmniPortlet events or whether this is because I seem to be forced to set Param1's default value (maybe this is overriding my data source URL even in the drill down chart).
There seem to be some examples of the chart click causing another chart to refresh. These docs don't have a lot of detail, plus I want the SAME OmniPortlet to show the drill down chart.
Has anybody done this? Any pointers would be appreciated..

Hi Sebastian,
You cannot have drill downs from different charts to the same target.
As per your scenario you have 3 column charts with warehouses displaying their respective 3 KPI's values. I believe you would have created a series each for available warehouses. If you have selected drill down on load for all the column charts with one single target then at load all the three column charts will try to place the destination of their selected series(based on warehouse selected) to the same target.
And also as you mentioned when the user tries to select the same chart again the target doesn't change, the reason is the same as all the charts are trying to put the destination of the series in the same cell.
Instead of doing it this way, what you could do is to name the series of all column charts the same and have the series name put into one cell. Then based on this series name you can lookup the data for that warehouse and display it in the line chart.
Here again the user has to select the same warehouse in all the three column charts else it wont work.
Hope this was useful =]
Thanks & Regards
Arjun.C.T

Pie chart using Class cl_igs_chart ??

Hi All,
I am looking for Sample code, how to draw Pie chart using standard class: cl_igs_chart.
I found a Standard SAP prog: GRAPHICS_IGS_CHART_TEST for drawing Bar chart, looking for pie chart now?
Please help me!!
Thanks in advance.

Hi,
if you want to create charts in the background using the IGS is the right choice!
Let's have a look at cl_igs_chart:
creating a pie chart can be done easily by changing the demo report graphics_igs_chart_test; just change the line
igs_chart->type = cl_igs_chart=>co_type_bars.
by replacing co_type_bars with co_type_pie (check the attributes of cl_igs_chart to see a list of chart types).
However, as cl_igs_chart does not provide further customizing settings I recommend that you download the SAP Chart Designer (as mentioned above) and use the class cl_igs_chart_engine instead. Demo report is graphics_igs_ce_test.
Regards, Kai

Drill down in pie chart using Business Graphics?

Similar Messages

Maybe you are looking for