Drill Down information - not shown in another tab, no navigation

Issue with Drill Down in Crystal Report Viewer 2008:
when clicking on summarized data, detailed data is shown, but it canu2019t be navigated if it has many records in more than 1 page.
Reason? seem's that the navigation logic is for the report itself (parent-summary), without taking into account this hidden data, even if it is visible after clicking.
Any clues?
Thanks, André

Ensure that you have SP 0:
https://smpdl.sap-ag.de/~sapidp/012002523100007528552008E/cr2008_sp0.zip
If that does not help, please post this query to the Crystal Reports Design
forum:
SAP Crystal Reports
That forum is monitored by qualified technicians and you will get a faster response there. Also, all BOE queries remain in one place and thus can be easily searched in one place.
Thank you for your understanding,
Ludek

Similar Messages

Ship to party,Bill to party, payer, sold to party not shown in partners Tab

Hi,
Kindly note that Ship to party,Bill to party, payer, sold to party not shown in partners Tab.
Eventhough SP,SH,BP,PY are assigned to customer KU only.
And we have assigned Partner Functions ot account Group.
Still Ship to party,Bill to party, payer, sold to party not shown in partners Tab
Please help.
Regards,
Rajkumar.C

Hi
Please check the following setting once again in spro > sales and distribution > baisc function > partner determination > For customer master
1. check for partner determination procedure AG , if you have created a new one then please check whether it is there in the list.
2.Select the AG and then check for whether the partner function has been made mandatory in the procedure or not.
tick mark SP, BP,SH,PY , since Sold to party should not be allowed to change so mark it as Not Modifable
3. partner determination procedure assingment for the account group. AG should be assinged to your account group
4. Account Group Function assingment - Make sure your all the partner function SP,BP.PY.SH has been assinged to the Account group here.
Thanks
RB

Drill down report not working in 1og report

hi all,
Drill down report not working in 1og.
in 6i it working good but 10g not working .
plz help any one.
thanks

Hello,
For detailled instructions about hyperlinks :
Oracle® Reports Building Reports
10g Release 2 (10.1.2)
B13895-01
3.6.10.1.8 Creating a hyperlink using the Property Inspector
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b13895/orbr_howto.htm#i1062802
Regards

Drill down is not working in 3rd level of dimension hirarchy

Hi,
drill down is not working in 3rd level of dimension hirarchy,any issues. once i clicked on 3rd level it goes to detail level instead of going to 2nd level
thanks

any updates

Books on iPad not shown under iPad tab in iTunes

For some reason existing ebooks on my iPad mini are not visible under the "Books" sidebar entry inside iTunes, under the "On This iPad" tab. I can add books to iBooks on the iPad by dragging them to the iPad icon inside iTunes, and the books transfer OK; they simply are not shown in the list in iTunes. I have another iPad which works fine, i.e. books on the iPad shows up in the list; same with an iPhone which works correctly. Alldevices have synch switched off so I manually add books (and music; music list works fine on all of them so it is only books having the problem).
This is frustrating since it means I cannot remove books from the iPad using iTunes. Deleting all the books on the iPad (by doing it inside the iBooks app on it), deleting the iBooks app itself, rebooting, and then re-adding books does not help. Also, the iPad in questio was recently reset using an iCloud backup which did not change the situation.
So any ideas why my iTunes insists there are no books on this particular iPad, even though iTunes happily transfers them?

Firstly, make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
Secondly, try all the other ports on your computer, even a number of times.
Thirdly, if you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
Failing all that, see here - http://support.apple.com/kb/TS1538 for Windows and http://support.apple.com/kb/TS1591 for Macs
And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
http://www.apple.com/support/ipad/assistant/itunes/

Drill down is not working for Pivot tables,but working for chart

I have two reports and trying to navigate betwen summary report to detail report. But details report is displaying all the records .The filter condition is not working and displaying all the filters .I have Case statement in my filter.But the summary report column where the filter condition is applied is aggregated in the RPD level. Does this might be the reason ?. Is it passing different type of data type to details report ?. The filter condition is not working for Pivot table .But Chart is working fine and displaying the only selected records based on the filter condition.
Please help me with the below issue.

Hi sil174sss,
Per my understanding you are experiencing the issue with the excel report which have add the drill down action, after export to excel only the expanded nodes included and the collapsed nodes is not shown, right?
Generally, if we expand the nodes before export to excel then the excel will display the expanded details row and keep collapsed the details row which haven't expand, but we have the toggle "+","-" on the left of the Excel to help
control the expand and collapse, when you click the "+" you can expand the collapsed notes to see the details rows.
I have tested on my local environment with different version of SSRS and can always see the "+","-" as below:
On the Top left corner you can find the "1","2", this help to control the "Collapse All" and "Expand All".
If you can't see the "+","-" in the excel, the issue can be caused by the Excel version you are currently using, and also excel have limit support of this, please provide us the Excel version information and the SSRS version. You
can reference to this similar thread:
lost collapsing columns when export to excel
Please try to export other drill down report to excel and check if they work fine, if they did, the issue can be caused by the drill down action you have added in this report is not correctly, if possible, please try to redesign the report.
Article below about how to add Expand/Collapse Action to an Item for your reference:
http://msdn.microsoft.com/en-us/library/dd220405.aspx
If your problem still exists, please feel free to ask
Regards
Vicky Liu

Drill Down is not working after exporting to excel

Hi,
I have created a drill down report in SSRS . Its working perfect. But when I export it to excel, it is showing only the expanded nodes. But I want the same functionality which gives user to expand or collapse the nodes in Excel as well. Can any one please
help me with this?

Hi sil174sss,
Per my understanding you are experiencing the issue with the excel report which have add the drill down action, after export to excel only the expanded nodes included and the collapsed nodes is not shown, right?
Generally, if we expand the nodes before export to excel then the excel will display the expanded details row and keep collapsed the details row which haven't expand, but we have the toggle "+","-" on the left of the Excel to help
control the expand and collapse, when you click the "+" you can expand the collapsed notes to see the details rows.
I have tested on my local environment with different version of SSRS and can always see the "+","-" as below:
On the Top left corner you can find the "1","2", this help to control the "Collapse All" and "Expand All".
If you can't see the "+","-" in the excel, the issue can be caused by the Excel version you are currently using, and also excel have limit support of this, please provide us the Excel version information and the SSRS version. You
can reference to this similar thread:
lost collapsing columns when export to excel
Please try to export other drill down report to excel and check if they work fine, if they did, the issue can be caused by the drill down action you have added in this report is not correctly, if possible, please try to redesign the report.
Article below about how to add Expand/Collapse Action to an Item for your reference:
http://msdn.microsoft.com/en-us/library/dd220405.aspx
If your problem still exists, please feel free to ask
Regards
Vicky Liu

Depreciation value not shown under the tab 'posted value' in AW01N

Dear experts
I have in chart of depreciation US GAAP book(posted to G/L), local GAAP book(not posted), book to post difference of two GAAP(posted to G/L), and local tax book.
In AW01N, the ordinary depreciation value is shown correctly for all books in the first tab 'planned values',
But on the second tab 'posted values', depreciation value only shown for the US GAAP book.
I'm thinking it maybe relavant with posting to G/L or not, that means only book with posting to G/L is shown with deprecation value on the second tab.
But something strange is in another chart of deprecation, deprecation value is shown for US book, local book.
Could someone comment how to control deprecation value shown or not on the second tab by local book?
Best Regards,
Nicole

Hi,
If you would have mentioned it as a "area post in real time" it will show you in the aw01n. If not, it will not show. Because, the tab specifies the posted values which means how much depreciation posted to GL.
As you have put "area doesnot post" for the local book, it will not show the balance.
Thanks,
sravankumar

Advanced template to drill down from one dimension to another

Dear all:
Situation
I am trying to create an report that displays my Accounts by month. In addition, after I double-click each account (if it is a base member), it drills down to open Entity (in my case Cost Center) associated with that Account number. In the Entity drill-down section, once the Entity becomes a base member, it drills down to IO (internal orders) associated with a particular cost center.
Data
1. I tried to manipulate existing "Double Drill Down" dynamic template, and disabled the column expansion (because my columns consist of months of actual vs. budget and some ratio calculation). The problem is that after I drilled down, my EVGTS formula was not replicated in the other dimension
2. I tried to integrate EVEXP into EVDRE but was unsuccessful too... The expansion worked as if everything got expanded at the same time.
Question
Is my approach correct? Is this an even good practice to do, or I should keep it as standard as possible?
Thank you!
Have a great day!
Sincerely,
Brian

The double-drill down dynamic template accommodate my need, except I didn't modify the report to my format correctly.

Users in flat file not shown in Ressources Tab

Is it normal that users saved in flat (XML)files are not shown in the ressources tab?
When I acces the active directory or a WINNT or Solaris passwd file I see a "+" in front of the ressource with clicking on it I see all users within this ressource.
But there's no "+" in front of my XML ressource also I have some users saved within my XML file!?

I think you must be looking at the reconciliation account index. Only resources that you have reconcile against will have entries in the account index.
sbr

Drill down value not matching with Displayed Report Painter Issue-GR55

Hi,
Need your help for an issue in drill down value of report painter from actual cost coloumn.
I have created a new report group based on OSS Note-157720 in GR55 Traction. This new report group will provide data of Planed / Actual cost, Planned / Actual Quantity of the project in range of fiscal year/periods. The issue in this report is displayed data of actual cost is not matching with drill down data. The actual cost coloumn is formula coloumn which framed by subtracting All periods cost coloumn, Before Periods Cost Coloumn and After periods cost coloumn.
Could you suggest on this issue.
Thank you for your cooperation.
Regards,
Rakesh

The report you are running first might have been created with some hidden columns that contain more than one variables relating to period and fiscal year. These may not be matching those that are required to run the drilldown. Look into the definition of the drilldown report. If you would want to match the first report, It may be better to identify which report runs on drilldown and the run that report with the required parameters.

App shown in "Purchase History" but not shown in "Purchase" tab

I tried syncing my Ipad2 to Ipad3. Only some of my apps transferred to the new Ipad3.
I checked Itunes purchase log "Purchase History" and it DOES show that I purchased the apps, but yet the app is not shown on the ipad3.
On the ipad3, went into App Store/ Purchased (tab at bottom).
My puchased app is not there. I only see the Free version.
I thought to try to see if I tried to purchase again, I would get a message that the item is already purchased.
It brought me all the way up to the credit card info page, so I stopped as I do not want to purchase again.
Question is...How do I get my purchased apps back ?
Purchase History shows it there and paid for, but everytime I try to restart and reconnect and re-sync and turn off then turn on, it does not come back.
I checked my Itunes apps, and the only app shown is the free version. What happened to the bought version?
I only have (1) Apple Id account.
Any help would be GREATLY APPRECIATED.
Thank you.
J

Does it also not show under the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes ?
You can try contacting iTunes support and see if they can see why it's not there (I'm not aware of any phone support for iTunes) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Drill Down are not giving correct values

Hi
We created sales Order values as a character and putting them in Rows and populating data by writing update rule. We created variables on calendar month in order to choose specific period of data in the query. For example if we need 02/2008 to 0/42008 which gives two months of data. When I drill down on Sales Order or billing document on the report its not giving variable interval data instead its pulling all the sales orders and billing documents in the Cube. With out drilling down the values are showing OK. If I restrict with same period in the cube it's giving correct values
Please let us know if you have any ideas.
Thanks
Naga

Aah, I guessed it correctly!
Remove the local var of the Stop button & place the terminal itself inside the inner while loop & directly wire it to the conditional terminal of the outer while loop.
Please see the attached pic...
Message Edited by parthabe on 07-30-2009 07:12 AM
- Partha
LabVIEW - Wires that catch bugs!
Attachments:
arrayreq_mod.jpg ‏97 KB
arrayreq_mod.jpg ‏97 KB
arrayreq_mod.jpg ‏99 KB

Removing Drill Down is not summing up the values for key figure

Hi ,
While analysing the data in BW report , I have encounter the problem in getting the correct data.
BW report is showing two records for material , having different customer ie. customer1 & customer 2 .
If i remove the customer from the Drill down , then values is not summed up , rather it is showing the values only for customer1
Scenario:
With customer drill Down:
Material    Customer   Key Figure1   Key Figure 2
Mat1       Customer1     1000          2000
MAt1       Customer2     3000          4000
Without customer Drill Down
Material Key figure1 Key Figure2
Mat1          3000          4000
In the query designer there is restriction of customer on two characteristic in default value pane.
The issue is happening for particular material , for other material , BW report is working fine.
Please suggest , to resolve the issue.
Regards,
Sudheer

Hi Sudheer,
What properties are set on your key figures 1 & 2. Could they be set to Min or Max.
There may be an aggregation level set if they are calculated key figures that is worth checking.
With regards
Gill

Attendee Information not shown

Hello,
I have a developed a report to retrieve Attendees information for 'MEALS' expense type for an IExpense Report. However for few Internet Expense reports, though attendee information is specified, it is not shown on my report.
Attendee information is available in 'OIE_ATTENDEES_ALL' table. I have linked the report line id from this table to invoice distribution id of 'AP_INVOICE_DISTRIBUTIONS_ALL' table.
When Expense Report Import program is run, the expense report will not be visible in Internet Expenses and a new invoice will be created in payables.
Can any one let me know if there is any other way to get attendee information.
Thank You,
Srinivas

Hi Madhav,
Thanks for the reply.
Once import program is run, the data in AP_EXPENSE_REPORT_HEADERS_ALL and AP_EXPENSE_REPORT_LINES_ALL is purged. However the data exists in AP_EXP_REPORT_DISTS_ALL and OIE_ATTENDEES_ALL tables. However I am not sure how I can link the data in these tables (AP_EXP_REPORT_DISTS_ALL and OIE_ATTENDEES_ALL) with AP related tables.
Please let me know your thoughts.
Thank You,
Srinivas

Drill Down information - not shown in another tab, no navigation

Similar Messages

Maybe you are looking for