Drill down issue in bubble chart
Hi all,
I have 2 series, which showing project wise value . I want to see details info about that particular project. Problem is that when i map source and destination in drill down for 2 different series.It will not allow to map source data to same destination for 2 series .Because of that drill down not working properly.
Pls suggest me how to solve that problem.
Regards,
Anish
Hi Anish,
There is "Series Names Destination:" parameter on Drill-Down (Insertion) Tab of Bubble chart component. By using that parameter you can retrieve selected serie. Via that value you can extract selected serie's selected value and drill down to required selection via some excel formulas like index-match or vlookup-hlookup. I hope that solves your issue.
Regards,
Ahmet
Similar Messages
-
Bubble Chart drill down issues
I have a filter and a bubble chat with 7 series. The chart is showing up bubbles with different size and colors as per the settings when I chnage the filter
The problem is with drill down
I want to drill down to a Bar chart when I click on bubbles. Each bubble click will drill down data into that bar charchart as a pop up. I know how to do it as I have done it in the past with other components.
But when I use drill down with bubble chart, I have to assign separate destination area for each series which makes it difficult to drill down into a chart. What i want is the bubbles to drill down data into a single row so that I can map the Y-axis of chart component to that row and X axis as fixed labels. But I am not able to do that. Moreover once inserted there is no way to clear the destination cells.
However if I use data in range options in bubble chart then I can use drill down as I get only one series in that case. But that method also has limitations.
1. I am not able to display series name on the bubbles. It doesn't make any sense to show bubbles without any labels.
2. All bubbles are of same color.
Is it possible to overcome above two limitations when using data in range option?
ThanksHi Tarun,
as a workaround you could define a special area as mapping area for the X-Y-chart.
This area is filled via excel formulas from the bubble chart drill down destinations. You can concatenate the values from the drill down target areas, like "=A4&A5" etc. Make sure to clear all cells except the actual drill down target cells.
Hope this helps,
best regards
Heiko -
Hi All,
we are having problems in disco viewer regarding the drill down issues when uisng the IE7, and i installed Jinitiator 1.3.1.26 and 1.3.1.28 and followed the following procedure based on the research i have done but still no results.
In IE7:
Tools, Manage Add-ons, Enable or Disable Add-ons
Show: Add-ons that have been used by Internet Explorer
Click on "shockwave flash object(flash9e.ocx)"
Click Disable, Okay
Restart Internet Explorer
Please any help will be great.
ThanksIf you are going to go through the effort to apply 10.1.2.2 patchset, then you might as well apply 10.1.2.3 patchset (the patchsets are cumulative) and the latest Discoverer cumulative patch. The issue is fixed there as well.
Note 237607.1 ALERT: Required and Recommended Patch Levels For All Discoverer Versions
There was a one-off patch that only supplied a new javascript file (BIPopupMenu.js) for the version you are on. That would be a quick fix, but again I would recommend the latest patchset to avoid many other issues you may face on this version.
Regards,
Steve. -
Hi
I'm using discoverer
OracleBI Discoverer 10g (10.1.2.2)
Oracle Business Intelligence Discoverer Plus 10g (10.1.2.54.25)
Did any one come up with a solution for the "drill down issues when using IE7" ? I have tried the patchset in the forum but of no use.
Thanks againHi
Are you using Java or Jinitiator and which version? Do you have other users on IE7 who are able to run ok? Then you might want to look at the operating system. Are we talking XP or Vista?
What we need to do is rule out various causes one by one. Then if all else fails you should raise a service request with Oracle.
Back in 2007 I posted something about drilling and IE7 on my blog: http://learndiscoverer.blogspot.com/2007/03/discoverer-and-ie7.html
Here is the gist of that post: It seems Oracle have released a patch (5758865) , available on MetaLink, with the fix for IE7. This is a one-off patch and requires a password which means you will have to raise a service request and tell Oracle you are having trouble drilling in Viewer when using IE7. This patch is applicable whether you are using relational or OLAP modeling. The downside of this patch is that it can only be applied on top of 10.1.2.2. You can get the 10.1.2.2 patch (4960210) also on MetaLink. Be warned though that 10.1.2.2 is not a small patch. It is 1.6 GB in size and is a full upgrade of the 10.1.2.0.2 application server.
Is this one of the patches that you tried?
Best wishes
Michael -
Xcelsius Bubble Chart - Drill Down Issues
Hi ,
Product : Xcelsius SP 3
I have a bubble chat with 7 series. The chart is showing up bubbles with different size and colors as per the settings.
The problem is with drill down
I want to drill down to a X-Y chart when I click on bubbles. Each bubble click will drill down data into that X-Y chart as a pop up. I know how to do it as I have done it in the past with other components.
But when I use drill down with bubble chart, I have to assign separate destination area for each series which makes it difficult to drill down into a chart. What i want is the bubbles to drill down data into a single row so that I can map the Y-axis of chart component to that row and X axis as fixed labels. But I am not able to do that. Moreover once inserted there is no way to clear the destination cells.
However if I use data in range options in bubble chart then I can use drill down as I get only one series in that case. But that method also has limitations.
1. I am not able to display series name on the bubbles. It doesn't make any sense to show bubbles without any labels.
2. All bubbles are of same color.
Is it possible to overcome above two limitations when using data in range option?
Please help if someone has encountered this issue. There has to be some solution for this.
Thanks,
TarunHi Tarun,
as a workaround you could define a special area as mapping area for the X-Y-chart.
This area is filled via excel formulas from the bubble chart drill down destinations. You can concatenate the values from the drill down target areas, like "=A4&A5" etc. Make sure to clear all cells except the actual drill down target cells.
Hope this helps,
best regards
Heiko -
Drill down mapping in Combo chart in BAM 11g
Is it possible to enable drill down for both the report in combo chart?That means i have a combo chart of zone wise distribution of total price as bar chart and zone wise distribution of total quote as line chart.If i click on bar chart and line chart it will open another report.
Hi Anish,
There is "Series Names Destination:" parameter on Drill-Down (Insertion) Tab of Bubble chart component. By using that parameter you can retrieve selected serie. Via that value you can extract selected serie's selected value and drill down to required selection via some excel formulas like index-match or vlookup-hlookup. I hope that solves your issue.
Regards,
Ahmet -
Drill Down feature for pie chart in JSP
Hi,
I need to have drill down feature in my Pie Chart which is generated using JFreeChart package. The pie chart is generated dynamically basing upon the database values as inputs .
Now on click of any one sector i have to show other bar graph. The bargraphs would be different for different sectors clicked.How to use Mouse Listener? How can track or keep check on the boundaries of different sectors?.
Please help me on this issue.
Thanks in advance,
Praveen@OP: don't ask the same question in two different threads:
http://forum.java.sun.com/thread.jspa?threadID=5121491&messageID=9424672#9424672
kind regards,
Jos -
Hi,
I've configured a hierarchy (level-based) on clustering attributes: info_data(id,gender,age,region,category,relevation_date,cluster_name) dimension_data(foreign_id,occurrences) in which the hierarchy is defined as: gender ->age -> region. I've done the same type of hierarchy on other business models (also other tables) and it worked as expected.
In this configuration, instead, the drill-down seems to collapse into the detail level directly: for example if I make a pie chart where I put as pies the gender distribution (M/F) and I click on the pie with "M" I expect to have a pie with the age combinations, but what I have is that also the id (which is the display column for the detail level) shows up making the chart unreadable (all combination of age/id for "M"...as id is unique every pie as the same size).
I've done some research and tried some workaround I see for similar problems like marking the hierarchy as ragged, but the problem still remains. Any idea?
Thank you in advance.Which release do you use of OBIEE ?
-
Report Designer drill down issue
Hi Friends,
I am having an issue with report designer.When i run the report designer the characteristics are getting displayed in drill down form for each row of values.Is there any way to restrict this. i want to display the header part in tabular view.
Thanks in advance.
Mandadi.Hi Srikanth,
In Report designer output i'm getting the header part as drill down which i dont want.
i want the output in the following format
header1 header2 header3 value
xxxx abc efg 10
yyyy cfg tre 20
but i'm getting in the drill down format as follows
xxxx
abc
efg 10
yyyy
cfg
tre 20
Thanks
Mandadi -
Webi Drill down issue - SQL AS
Hi Guys,
Did anyone encounter the following issue?
There are 4 dimensions(one of them is Date) and 1 measure in my Webi Report.
When I drill down from one measure to another, the SUM of that measure will not the same with its upper Level.
For example, Level 1 is:
Country total sales
China 1000
Then drill down to Level 2:
Region total sales
North 100
South 200
West 300
While, the SUM of total sales of the three region is not equal with China.
Your help will be highly appreciated.
Thanks.
Regards,
Daniel1. Please check your SQL Query gives Country - Region Wise perfects output/result or not..............
2. Check any Filter is set or not (from info view/edit Query/universe)
Please check correctly.
Thanks -
Hierarchy drill down issue at the lowest level
Hi,
In OBIEE 11.1.1.5 I face an issue with drill down to lowest level of presentation hierarchy (expanded by "+" in report). It happens only for combination of 2 dimensions presentation hierarchies in analytics report (parent-child organizational structure + level based product categorization). Aggregated date comes from OLAP but lowest level product information comes from relational database and this details are not displayed.
First I drill to particular sales rep in organizational structure. Then for that sales rep I need to drill down product hierarchy and it works except lowest level of details. At the lowest level of product hierarchy, query sent to database (I have it from logs) return proper results (checked directly in db) but report behaves the way like there are no details at the lowest level and product details are not displayed.
Both (Organizational structure, Product) dimension presentation hierarchies works ok at all levels when used separately. Also product hierarchy works well at all levels (including OLAP->relational drill) when used togather with other level-based hierarchies in subject area.
I am wondering what I could have done wrong...
Advices are very welcome!Hierarchy keys are set properly and "use for display" is checked.
Dimension presentation hierarchies does not work only when I use particular two hierarchies togather in one report table. When each of hierarchies is displayed separately it works ok. -
Drill down issue in report painter report
Hi-
We have an issue where the drill down in one of our report painter reports isn't working. When the user tries to drill down, it says the list contains no data.
However, if the target report (of the drill down) is run first, and then the report painter report is run, the drill down will then work properly.
We need to know where to check to get this fixed. It has us stumped. The report painter report is associated with a report group.
Thanks,
KevinJust needed to update the variant from the calling program's report group. Duh.
-
Essbase Add-in and Office 2010 double clicking drilling down issue
We have Office 2010 and Essbase Add-in 6.5.4 and some users are having issues when double clicking to zoom in. When using the double-click to drill down, it flashes a few times and drills down to the lowest level even though it is setup to zoom to the next level. It works when you use zoom in from the menu and this doesnt happen to all the users. Does anyone have a fix for this issue?
We had similar issue but with lower versions of excel where a double click acts continously till the lowest level is reached for the member selected. Notice that all the members are not at the lowest level, it only happens for the current selected cell in excel.
In my case a re-install of add-in worked. Have you tried re-installing add-in. See that unistall is complete before re-installation. As you understand the problem is not with all machines/users, hence it should not be an issue with add-in. -
Hi Experts,
OBIEE 11.1.1.6.0,
the mutipdatasoure is ESSBASE 11.1.1.2
In Essbase databases we use the “code” as the Member name and the “description” in the Alias, when we click the Alias name in answer for drill down horizontally, it will generate the following error message, maybe the Alias column lead to this problem and do not find the exact value in ESSBASE member name. How to solve this issue?
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 96002] Essbase Error: Unknown Member [Dim_Region].[China] used in query (HY000)
SQL Issued: SELECT 0 s_0, "Sales Cube"."Region"."Country Name" s_1, "Sales Cube"."Region"."Region Name" s_2, SORTKEY("Sales Cube"."Region"."Country Name") s_3, SORTKEY("Sales Cube"."Region"."Region Name") s_4 FROM "Sales Cube" WHERE ("Region"."Country Name" = 'China') FETCH FIRST 65001 ROWS ONLY
Note:
When we use “code” as the Member name for drilling down ,it will be successful.
In physical layer, we change member name into Alias default in display column area.
Code:
1001(Alias China+)
10011(Alis North+)
10012(Alis South+)Any suggestions?
-
Drill down then navigate in chart/table
Is there a way to drill-down the hierarchy then once at the very bottom member, navigate to a more detailed report. I see that i can either choose "drill" or "navigate" under chart interactions but I really kind of want both. I have a line chart that shows sales by region (country->state->city). When I drill down to the city level, I may be viewing sales for 10 cities in Texas. Now since I am at the bottome of this hierarchy I want to click the chart on any city and it take me to the details of that cities sales details on another report.
Thanks
-Derekyes your absolutely true.
You cannot navigate to a new report unless you have the columns participating in navigation are pre-defined in answers.
With that said, it is not possible to navigate after performing a drill-down to detail, as detail level is not available to implement navigation.
please mark answers accordingly..
-bifacts :-)
http://www.obinotes.com
Maybe you are looking for
-
[solved] udev = systemd-tools: system no longer boots completely
Hi guys. Today I updated my system, and now it won't boot past the boot messages. It appears that my ttys aren't being "made" (?). The actual errors appear to be [ TIME ] Timed out waiting for device dev-tty2.device [ TIME ] Timed out waiting for dev
-
Dv-7 -4173us overheated fried cpu
ok i checked the thread on over heating, apparently i have a classic example. laptop started showing heat problems about a year ago. i set the fan to run constatly when i first statred using it which may have helped me not see the problem for some ti
-
Officejet Pro 8500 Feeding problems & Stuck in device check mode.
Ever since my brother decided to unplug my Officetjet Pro 8500 A909a and move it to the other side of the room so he could play on his laptop at my computer desk, my printer has been feeding paper wrong and then displaying a message that says it has
-
How to get a previous iTunes library recognized in OS X Lion
I've been using iTunes for some time now - I have my iTunes folder stored on an external FW hard drive partition. Doesn't seem to be recognized by iTunes in OS 10.7.x Lion on my Macbook. My iPhone now says it is over capacity, I can't organize my iPh
-
Using Forms_DDL getting error ORA-24374-Any Ideas?
Hi all, I am getting the following error ORA-24374: define not done before fetch or execute and fetch I am using the forms_ddl built-in and believe that it has something to do with this. I have looked up the error and there is no docs on it. If anyon