Drill Down Problem in Report

Hi,
I am using the product hierarchy in the report and its used for drilling down. when i say drilldown the report is not working and TIME OUT warning is coming.
I have run the same report in quality system which contains more or less the same data. it works fine. all the packages are same in both the systems ?
any one have an idea of why its behaving like that?
Best Regards
Bhav

Bhavani,
Welcome to SDN ...
what is the timeout set in the servers .... Check in your Quality systems for the profile settings in RZ10 for the timeout setting and have the same in the other server as well..
otherwise leave it blank if you do not want any time out.
Arun
Assign points if useful
Message was edited by:
        Arun Varadarajan

Similar Messages

  • Drill down problem when using union all combination

    Hi All,
    I have a simple report with a drill down. The report has three columns Region, Sales, Flag... which will drill down to detail level of sales. The Flag column has Y, N values and we added 'All' Value in flag so that the user can select Y, N and All from the table prompt in the report . We have used union all in the report using combination to add the ' All ' Value in the flag. The problem is that now the main report is not passing the Flag values to the detail report. Flag is prompted in the filter in detail report.
    If I remove the 'All' value from Analysis with only Y N selection criteria the drill down works.
    Is there any work around? I have to use table prompt and All value selection in flag for drill down.
    Thanks,
    Virat

    The problem is without union all when doing combination of analysis drill down works, when I use combination drill down does not work because it does not pass the parameters for flag . I have used union all to add All value in flag.

  • BPC drill down problem - computer specific

    I recently developed several drill down reports in BPC v 7.0ms that I tested extensively and work great.  However, I have one user that when they open the report and attempt to double click on the heirarchy item to drill down further into the detail, it only reveals the forumula on that line (evdes) and doesn't propmt the drill down expansions.  I've also noticed that several templates that she opens don't automatically refresh like they should and they work properly for everyone else.   I tried logging into her computer with my user ID and still get the same results so I know it isn't a security issue in BPC.  She is using Excel 2007 and Windows XP.  Does anyone know of a setting in her system that would be preventing these expansions from happening the way they should?  I'm assuming its a setting somewhere either in her operating system or excel - just not familiar enough with those to know what to change or where to look.  I have checked her Macros settings and they are set to low and the box to allow VB is checked.  Any help is greatly appreciated!
    Thanks, Lynette

    I don't have the answer to your problem but I can tell you what happens from our application.
    If I drill down on a report using the crystal viewer, whilst viewing the drilldown report I have 3 possible print options.
    1) File > Print ( this prints the main report )
    2) A print icon we have added to our application (also prints the main report).
    3) A print icon on the viewer itself ( this prints the drilldown report)
    So my only question/suggestion is can you also see a print icon on the viewer header itself. If not you may need to make some alteration in the code to display this if it is a property you can change.
    This isn't something I get involved in, but someone else reading this may know.
    Good luck
    Richard

  • Excel drill down problem

    Hi Experts,
    I have a problem with the drill down in Excel report.When I filter and drill down by employee, the report show me the profit center instead. This happens intermittenly and a few other users have the same issue.
    I'm using Excel 2003, SAP GUI 710 and BEx Release 2004s (Support Package 12, Patch 1)
    What could be the reason? can anyone please advice?

    Hi Harlina,
    Just a wild guess : do you see profit centre in the free characteristic list (list providing the characteistic for drill down). If you dont I think you can check profit centre info object, short description/medium description - check if it profit centre and not employee.
    Also check if you have two employee characteristics available for drilldown - that could explain the intermittent nature.
    Regards,
    Sunmit.

  • Not able to drill down S_ALR_87013558 in reports

    Hello Experts,
    I am in strange situation where in I am not able to drill down my budget report S_ALR_87013558 in my development client. But it is working fine in production client.
    What could be the reason.?
    Please suggest.
    Thanks,
    Kumar Srinivasan

    Hi Kumar,
    Follow below steps in sequence.
    1. Please execute CJE2.
    2. Double Click on report 12KST1A. Message will come "You are changing an SAP delivery object". Press the tick mark.
    3. On Output Type tab, you must have clicked on radio button "Graphical Report Output". Please change the radio button classical drilldown and check "Available on Selection Screen" at the buttom.
    4. Save it.
    Check your report again and you will have an option there.
    Regards,
    Amit

  • How to setup the drill down on union report

    Hi,
    I'm setting the union report.
    I want to set the drill down to another report.
    But I can't setup it.
    Would you please tell me how to setup.
    Thank you.

    Hi Hemlatha
    In Crystal Reports, to prevent the ability to drill down into a subreport when published on the Web, add a text object that is filled with blank spaces, created by pressing the 'Space Bar' and 'Enter' for line returns, to eclipse the subreport.
    This workaround is applicable only to subreports that does not grow in size. For example, subreports that display only a chart or graph.
    Steps to Add a Text Object over a Subreport
    1. In the Crystal Reports Designer of the main report, insert a text object over the subreport.
    2. Resize the text object to be the same size or a little larger than the subreport object on the main report.
    3. Fill the text object with blank spaces created by pressing the 'Space Bar' and 'Enter'. This is necessary because resizing a text object without
    the blank spaces will not maintain its size when it has been published on the Web.
    ====================
    NOTE:
    You can format the text object with a hyperlink to another report, another file or a URL.
    ====================
    Now, when the Crystal report is previewed on the Web, the text object that fully eclipses the subreport will prevent the ability to drill down into it.
    Regards
    Girish

  • Drill-down lost in Report Builder

    Ever since the CFMX7.02 upgrade, we have lost the ability to
    drill-down on the Report Builder reports which previously had
    drill-down capability. I am referring to summary lines which
    contained a link to the detail. Has anyone experienced this and is
    there a fix for it?

    Do you choose PDF instead of flash paper as the output
    format? By some reason, the drill-down function does not work in
    flash paper format.
    Good luck,
    Daniel

  • HOW TO ADD DRILL DOWN IN A REPORT

    hi
    well i want to add drill down in my report....
    im unable to find it ....
    can you please help me to make a drill down in my report.
    thnx and regards
    UMAR NAYAB.

    hey thnx toronto..
    im able to make drill in my report....
    now my chart is not changing its data according to drill.....
    like my bar chart should also change with the data drilled down....
    please help regarding this....
    regards.

  • Drill down in XL Reporter

    Hi
    Can we have drill down in XL Reporter -Report Organizer
    Regards
    Farheen

    Hi Rekha,
    We can user drill down in XL reporter composer and excel . IN rerport composer when you drag a field to the selection criteria then you can drill down by transaction level.
    But Report organiser is where all the reports are saved and give a look and feel like windows explorer.
    What is your requirement. Post reporting related queries in the reporting forum
    [Reporting and Printing;
    Regards,
    Rakesh N

  • PIE Chart Drill down in bex report

    Hi Friends,
    In my bex report i have pie chart for year 2008.
    Shall I drill down on this report means if  i click on one part of the pie chart will i go to another report or another pie chart.
    Can any one pls tell me is it possible .
    Thanks & Regards,
    Ramnaresh.
    Edited by: ramnaresh porana on Dec 1, 2008 6:35 AM

    Hi ,
    Thanks for reply.
    how it is possible from context menu of the pie chart , i have seen the context menu of the pie chart but i did not get any related option for this one.
    Can you pls guide me.
    Thanks & Regards,
    Ramnaresh.

  • Drill down in webi report

    Hi,
    Is there any way to display the drill down in webi report.  For example:
    YearQuarterMonth--Week.......
    if the drill the Year option I can able to see all Quarter level measures and if I drill down further I can get into Month level measures and Week level and so on .
    But my question is When I drill the Year to Quarter...I want it to display both Year and Quarter and If I drill down further
    I want all the measures related to Year ,Quarter, Month and so on
    Basically want I need is a tree level hierarchy......Could any one plz help me what all changes I need to make in order to get a detailed report.
    Thanks
    Sushma
    Edited by: Sushma Reddy on Feb 9, 2010 9:44 PM

    Hi,
    Try to create a Class e.g Time in universe and objects to that class as year, quarter,month as
    Year Object -> data type -> D/N
    select To_date('sysdate','YYYY) as year from dual
    Month object-> data type -> D/N
    select to_date)'sysdate','MM') as month from dual;
    Quarter -> data type -> D/N
    case when @select(Time/Month) in (1,2,3) then q1
             when @select(Time/Month) in (4,5,6) then q2
              when @select(Time/Month) in (7,8,9) then q4
               when @select(Time/Month) in (10,11,12) then q4
    endcase
    Then create a hierarch in tools -> hiearchy ->custom hierarchy and add the above class there then in any report (Deski/WebI)
    you will get the above hierarchy and use it according to your requirement.
    Cheers,
    Suresh Aluri.

  • Error Message appears when drilling down from a report.

    Hi,
    I am using CR XI R2.
    I have an rpt file that displays a chart from a sub report.
    I tested it on the CR designer and report viewer - works ok.
    When I display this report in my .Net application, I get an error message when drilling down from this chart : "The Report Application Server failed"
    When looking at the log files I see this error message:
    4 19 13:11:14.770 5336 5564 (\servers\ras\dtsagent\reporthandler.cpp:11622): CReportHandler::buildReportViewerError: CSResultException thrown.   ErrorSrc:"CRPE" FileName:"\servers\ras\dtsagent\reporthandler.cpp" LineNum:11618 ErrorCode:997 ErrorMsg:"" DetailedErrorMsg:""
    This is a Viewer error - but when drilling down from the Report Viewer I don't get this exception.
    Does anyone know what this mean?

    Too strange and my require a phone support case;
    http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
    Three ideas:
    1) Install CR designer on one of the boxes where this does not work and try to run the report there
    2) Add a line to your code and save out the report just after your database logon once ( .saveAs). try to run this report in the CR designer.
    3) Use the [modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] utility to compare the runtime - both CR and db client between computers that work and those that do not.
    Ludek

  • Drill-down into AWR reports

    Hi experts,
    any can help me in this topic Drill-down into AWR reports.

    A typical AWR report - produced in html format- includes its main categories(for example Top 5 timed events) hyperlinked. By clicking on each one , you can navigate to a thorough analysis of all db parameters regarding it......
    Anyway....Can you more specific of what exactly do you want...?????
    Greetings...
    Sim

  • REUSE_ALV_GRID_DISPLAY drill down problem

    Hi all,
    I've searched through the forums and can't find out why my code doesn't work when I try to double-click to drill-down on my report. I've tried a number of variations including the usage of "status" and "events" but none have worked. I'd like the simplest solution. Can anyone provide any suggestions please?
    In my code, the break-point is never reached.
    form display_alv_report.
      call function 'REUSE_ALV_GRID_DISPLAY'
        exporting
          i_callback_program       = wa_repid
          it_fieldcat              = it_fcat[]
          it_sort                  = it_sort[]
          i_save                   = 'A'
          i_callback_user_command  = 'USER_COMMAND'
        tables
          t_outtab                 = it_data
        exceptions
          program_error            = 1
          others                   = 2.
      if sy-subrc <> 0.
        write:
          / 'Returncode',
            sy-subrc,
            'from function REUSE_ALV_LIST_DISPLAY'.
      endif.
    endform.                                             "display_alv_report
    form user_command using r_ucomm like sy-ucomm
                            rs_selfield  type slis_selfield.
      break-point.
      case r_ucomm.
        when '&IC1'.
          read table it_data into wa_data index rs_selfield-tabindex.
          set parameter id 'BUK' field wa_data-bukrs.
          set parameter id 'AN1' field wa_data-anln0.
          call transaction 'AW01N'.
      endcase.
    endform.                                           "user_command
    Thanks in advance! Points will be awarded for helpful answers.

    John,  your code looks pretty good to me.  Once thing though,  make sure that you are filling the wa_repid variable before the function call.
    wa_repid = sy-repid.
    Regards,
    Rich Heilman

  • Report-6i Drill Down Problem

    Hi,
    I have problem, while running master report, and press button(for drill down), it is showing error
    "Unable to open file moddet.rdf"
    Procedure Button:
    SRW.RUN_REPORT('moddet.rdf mode='||:p_Style||' paramform=no
    p_deptno="'||:deptno||'"');
    Thanks for advance help!!
    Regards,

    Hello,
    Do you know if the file moddet.rdf is in a directory belonging to the list of directories set in REPORTS60_PATH ?
    Regards

Maybe you are looking for