Drill down report display of text for z fields

Hi All,
I am workig on Drildown Reports.
The report is working perfectly and it is dispaing the output correctly.
I am able to see my Report output in Grid dispay.
The probem is I have some Z fields in my report.
Whn i am dispaying with Charactersic Display-->Key and Name
For the standard fields i am able to see the vaue and its description but i am not able to see the description for the Z fields.
What would be the probem.
This fields has the checktabe with the Text.
Please help me.
Thanks,
Feroz.

hi
check whether the z field is attached with the same table or structure.
Edited by: AP on Mar 18, 2009 5:12 AM

Similar Messages

Drill Down Report gives an error for General Ledger.

Hi,
I'm using the transaction GCAC to compare general ledger with profit centre accounting.While drilling down the report for PCA, the report works fine and gets drilled down to the invoice in SAP.But I get an error when I try to drill down the report for general ledger.It gives an error GI358 i.e. No line items were selected.The diagnosis of the error message shows that pool tables have to converted to transparent tables.
I want to know whether the error occurs beacuse of pool tables issue and if yes then how can we remove the error.
<<removed_by_moderator>>
Thanks,
Sandeep.
Edited by: Vijay Babu Dudla on Apr 27, 2009 7:04 AM

Hi sandeep,
Check if this is of any relevance to you:
http://help.sap.com/saphelp_45b/helpdata/EN/0a/8b7415dc4ad111950d0060b03c6b76/frameset.htm
Regards,
Ravi

Drill down Report in Xcelsius

Hi All,
I am new to BO i dont know much in BO.Is it possible to create Drill down Reports in Xcelsius.
For Example,
Sales Org     Revenue
A                   10000
B                    20000
If we select Sales Organization A or B then the Report would be
Sales Org       Material Group            Revenue
A                              10          5000
A                              20          5000
B                              30          10000
B                              40          10000
If we select Sales Org A or B then the Report would be
Sales Org     Material Group      Material          Revenue
A                              10          MAT01               3000
A                              10          MAT02               2000
A                              20          MAT03               5000
B                              30          MAT04               10000
B                              40          MAT05               10000
Like this i want to display the Report.How it possible in Xcelsius.Please help me it will be more useful.
Thanks,
Shiva
Edited by: siva kumar on Dec 5, 2011 7:50 PM

you can do drill in xcelsisu but for that you need to create 2 webi reports r use 2 different queries .(i dont know which verion of BI you are on)
how mnay organizations do you have if its a small number that you can create a lay out with drop down on left for organization and create 2 tables 1 for organization a data.. if pressed to be visible and 1 for b..
and if 1 and 2 are pressed then show the tired table with both data.
do it in excel using live office webi connection to bring the data in then import the data in excelsisu.. do all your calculations in excel first then bring it to Xcelsius
If we select Sales Organization A or B then the Report would be
Sales Org Material Group Revenue
A 10 5000
A 20 5000
B 30 10000
B 40 10000
If we select Sales Org A or B then the Report would be ( i think you mean and here)
Sales Org Material Group Material Revenue
A 10 MAT01 3000
A 10 MAT02 2000
A 20 MAT03 5000
B 30 MAT04 10000
B 40 MAT05 10000

HTML Drill Down Report

Hi,
I am using CR4E Ver 2.0.11.r1346.
I am producing HTML drill down report. My code for the same looks like..
CrystalReportViewer crystalReportViewer = new CrystalReportViewer();
                    crystalReportViewer.setOwnPage(false);
                    crystalReportViewer.setPrintMode(CrPrintMode.ACTIVEX);
                    crystalReportViewer.setReportSource(reportClientDocument.getReportSource());
                    HttpServletRequest request = (HttpServletRequest) parameters.get("httpServletRequest");
                    HttpServletResponse response = (HttpServletResponse) parameters.get("httpServletResponse");
                    String htmlContent = crystalReportViewer.getHtmlContent(request, response, request.getSession().getServletContext());
                    output.setContent(htmlContent.getBytes());
For some reasons, I can not use
crystalReportViewer.processHttpRequest
My code generates the HTML report as expected but the drill down reports do NOT work. I tried to inspect and got that the HTML generated by
getHtmlContent
does not have the script tag
event.js
. I added this script manually in generated content and tried to debug through, but it does not work.
Any clues?

Thanks.
I tried using
processHttpRequest
This generates the same report but Drill down does NOT work.
The code in my action class is...
CrystalReportViewer viewer = new CrystalReportViewer();
viewer.setOwnPage(true);
viewer.setPrintMode(CrPrintMode.ACTIVEX);
//Get the report source object that this viewer will be displaying.
IReportSource reportSource = (IReportSource)(httpServletRequest.getAttribute("ReportSource"));
if (null != reportSource && servletContext != null) {
     viewer.setReportSource(reportSource);
     //Render the report.
     viewer.processHttpRequest(httpServletRequest, httpServletResponse,
               servletContext,
               null);
Any clue?

Drill-Down Report Printing Problem for Selection Parameters

Dear Experts,
Have tried to configure Drill-Down Report for Vendor Balances,
Am having trouble when printing this drill-down report, Printing is coming OK but it comes with ALL selection parameters, for e.g, have entered 20 vendor codes for the balance display, system first prints all selection parameters and then it prints the output of vendor balances,
User does not want selection Parameters to be printed with the Report Output. Please find below screenshot for the problem.
Input Parameter Screen
Report Output Screen
Print Preview Screen (First Page - Selection Parameters)
Your help is much appreciated, if anyone can guide me, how to switch off selection parameters from Print Output of Drill-Down Report
Thanks
Regards
P

Hello Ms. Preeti,
Thanks for your reply, Have designed the report through FKI0 (FKI*)
Have already looked these setting, but these are not helping really, PFB screenshot for settings am having in my system, if you have any idea which can avoid User Input Parameters from printing then it will be really great help
Thanks for your help
Kind Regards
P

FSI0 - Drill Down Reports for Account Balance Analysis

Any orientation on this issue will be greatly appreciated.
These are the steps I did to create a new Drill-Down Report for my customer.
1. Created and modified a new Form based on the Form for the Financial Statement Analysis 0SAPBLNCE-04 (Periodic Actual vs Actual) using Transaction FSI4 (Create) and FSI5 (Change)
2. Created and modified a new Report with reference to the Form I just created using transactions FSI1 (Create) and FSI2 (Change)
3. I select "Expand: Completely" to see all Account Balances
3. All the totals match between the Original Standard Report and the new report I just created.
4. On both reports, when I select a Balance and then select the GOTO \ Line Items to get the list of documents I get the following results:
==> Most of the cases (I would say probably 80% of the cases) the Account Balance I selected matches with the Total of Line Items that is displayed when I do the GOTO \ Line Items
==> In some cases (just a few) the Account Balance does not match at all with the totals of Line Items that is displayed when I do the GOTO \ Line Items
Can somebody explain why ? Shouldn't the totals match all the time since I am specifically selecting a balance to see all its line items? Where are the missing line items?
Since these are just a few cases my customer is okay with it but he would like to hear a logic explanation why the Account Balance and its line items do not match on this report.

Hello,
There is a possibility that you have activate line item display for some of the accounts at a later stage. Meaning that earlier postings were not be shown for the earlier postings but only totals will be made available. Therefore, obviously there is bound to be difference between line item report and totals report.
You need to identify which accounts are being changed with line item display at a later stage.
In case if you forget to keep GL Line item display for an account, but the posting are already made the following steps you would required to get the line item display retrospectively.
1. Note that you are NOT required to make the balance of that GL account to ZERO. Please do not confuse with Open Item Management.
2. Put the check box line item display for the account in FS00. Make sure you are entering right company code.
3. Block the account for posting in COA Segment and Company Code Segment in FS00
4. Go to SA38 and run program RFSEPA01 (Give correct GL Account and Company Code)
5. Now, remove the block you kept on the GL Account in FS00.
This will reset the line item display retrospectively.
Hope this will solve your problem.
Regards,
Ravi

How can I activate drill down report for planned line items please urgent?

Hi Everyone,
Please suggest me how can i activate drill down report for planned line items in internal orders. S_ALR_87012993. Please suggest me, I'll award full points. I am unable to do it in client system, which has already line items. I tried in my sys with new config it is working.
Kind regards
Arvey.

Hi
It is based on the reports attached in the Report Group - TCODE: GR53
In the Report Group screen
Press CONFIGURE This is to attach any Drill Down reports.
Press the Insert Line icon
As is the screen may be used to insert a Report Writer report group. To add an ABAP, press other report type
Double click on ABAP Reports
Enter the name of the ABAP and ENTER
RCOPCA08 Profit Center: Plan Line Items
VVR

Adding a characteristics to AR Drill down report for line items

I have raised an OSS note on this, but they deem this to be consulting.
I have an AR drill down report for line items
It calls the structure RFRRD20.
I need to add a value into the characteristics so I can use it in the drill down report.
I have appended the structure, added a value in TKAF for the field, and it still does not show.
Has anybody done something similar?
I am sure this is easy, but only when you know how, so if you know how to do it please can you let me know.
thanks
Mark

Hi Mark
    I am also in the same situation where i need to add two characteristics (invoice date, due date) to the AR drill down reports. I added them to the structure and TKAF table as you did, but still could not get them to the drill down reports (FDI5 or FI1).
   From your posts, i see that SAP's response was that it is not possible to add characteristics to AR drilldown reports? Did they mention any reasons or OSS notes? How did you handle your requirement, were you able to work around?
   Your suggestions would be highly appreciated.
Thanks
Vamsi

Set headers for drill-down reports.

Hi!!!
The problem we have by now is when printing a report, selected characteristis are showed in header as "multiple values" instead of showing the real values that user have choose.
Does anybody knows how to set headers for drill-down reports in order to see selected characteristics?
Thanks in advance...
Adela Cambiasso.

Sorry, me again...
I have found yet they way to show in the header the report parameters, I mean, the selection criterias that user used when execute the report... I was able to show selected characteristics inside de report but not the selection criteria...
Do you know what I have lost? or what to use for this?
Thanks again.
Adela.

Drill Down Reports and Drag & Drop capability Tool for Developer2000

I am currently doing my development in Developer2000 rel. 2.0.
I have seen many tools for VB which provide the facility for Drill Down reporting and drag & drop option in reporting, but unable to find any tool for developer2000. I wonder if anyone can guide me about any tool for developer2000 which can provide these facilities in reporting and forms.......
Qamar Bilal

you can use the mouse triggers to do drag and drop.
you have mouse-move and mouse-enter etc...
what do you mean by drill down?
you can do drill down reporting in reports by using srw.run_report built in and you can also use oracle discoverer.

Drill down reports for new GL

Hi All
I want to assign drill down report to my PCA (New GL)report painter report( GR52). Can any one suggest some reports for drill down functionality.
Thanks

Hello Experts
This is solved. However, i am mentioning the solution here for further references
Before downloading the drill down reports, we need to activate the business funciton "FIN_GL_CI_1" through T.Code SFW5
Regards
Anilkumar

Drill Down reports for Profit Centers and Segments

Hello Experts
I would like to down load the "Drill down reports for profit center and segments". I have found standard SAP documentation through (http://help.sap.com/erp2005_ehp_05/helpdata/EN/46/f6fc4e7a7569b5e10000000a114a6b/frameset.htm ).
As per the given guidelines, i have beening trying to down load from client 000, the spool request is showing finished (with out any error and in one / two seconds) .. but the reports are appearining in SAP Easy Acess.
I have checked with Basis team, whethere i have restrictions with my userid. Even with Basis id also, we are being unable to activate these reports.
Does it required any configuration / licence issues before i need to lookinto before download?
Kindly revert
Regards
Anil Kumar

Hello Experts
This is solved. However, i am mentioning the solution here for further references
Before downloading the drill down reports, we need to activate the business funciton "FIN_GL_CI_1" through T.Code SFW5
Regards
Anilkumar

KCA0 - Convert Aspect for drill-down report in ECC6

Hello experts,
Do you know the steps to convert an aspect (for drill-down reports) from 3.0 to ECC6? And how to add it to the list in transaction KCR0 (Execute Drill-down report). SAP has mentioned transaction KCA0 for doing a conversion after the upgrade but I am not familiar with this transaction. Please help!
Thanks and Best regards,
Chuong

Hi,
You can use all the statements in HR also.
For getting the AB values,there are macros and function modules available.
Macros:
rp-imp-c2-b2.
You need to pass b2 key values before calling macro.For eg,
MOVE pernr-pernr TO b2-key-pernr.(since u r using LDB)
MOVE year         TO b2-key-pabrj. (year you need to pass)
MOVE period       TO b2-key-pabrp. (month)
MOVE '1'          TO b2-key-cltyp.
have a look at these Function Modules also.
HR_WORK_SCHEDULE_TIMES
HR_TIME_RESULTS_GET
HR_TIME_RESULTS_IN_INTERVAL
HR_WORK_SCHEDULE_TIMES
Reward points if helpful.
Regards,
Manoj.

Use different Layouts for Summary and Details in Drill down report

Hi All,
I have a 2 level drill down report in ALV.
The summary report has certain fields and the Detail report has different fields. Now my problem is that when i use a default layout (with all fields of summary report) for the summary report, and drill down to the detail report i'm missing the fields on detail that are not in Summary. And if i save the default layout as default (with all fields of Detail) and go back to sumary, I'm missing the some other fields on summary (which are not on detail report).
Is there a way to make different default layouts for each of those summary and detail reports:
Also as the layouts are choosen by the user, i cannot hardcode any particular layout;
So if the user chooses a layout for detail; it has to stay the same layout for the detail report if he goes to summary and then back to detail; unless the user changes the layout again.
I'm using two different Layout types for each report. but i still cannot get the desired effect.
Data:
 gt_layout_s type slis_layout_alv,
 gt_layout_d type slis_layout_alv,
call function 'REUSE_ALV_GRID_DISPLAY'
 exporting
 i_callback_program = g_repid
 is_layout = gt_layout_s
 i_callback_top_of_page = g_top_of_page
 i_callback_user_command = g_user_command
 i_callback_pf_status_set = g_status
 i_save = g_save
 is_variant = gs_variant
 it_fieldcat = gt_fieldcat[]
 it_events = gt_events[]
 importing
 es_exit_caused_by_user = gs_exit_caused_by_user
 tables
 t_outtab = it_summary.
call function 'REUSE_ALV_GRID_DISPLAY'
 exporting
 i_callback_program = g_repid
 is_layout = gt_layout_d
 i_callback_top_of_page = g_top_of_page
 i_callback_user_command = g_user_command
 i_callback_pf_status_set = g_status
 i_save = g_save
 is_variant = gs_variant
 it_fieldcat = gt_fieldcat[]
 it_events = gt_events[]
 importing
 es_exit_caused_by_user = gs_exit_caused_by_user
 tables
 t_outtab = it_detail_disp.

Here is how you differentiate between the layout of two different grids. There is the parameter, IS_VARIANT in the function. You usually leave it empty or pass only the report name and username. What you need to do is to pass unique string for each grids to the HANDLE field of the parameter IS_VARIANT. You can probably hard code it as HEADER and DETAILS in your case. Once that is done, system identified that these two different layout for different grids.
Regards,
Ravi
Note : Please mark all the helpful answers

DRILL DOWN REPORT FOR DIFFERENT DATA SETS in 11G

Hello.
My requirment is to do a drill down report with 2 data sets.
My first data set have all the chart of accounts , My second data set have all the transactions.
in my report i have 2 data tables. One with the accounts , and when i click in one account get all the transactions for selected account in the second data table.
Anyone know how i can do this
Any help would be apreciatted
Paulo

You can use the drill down strategy, well described by my friend Kan:
http://bipconsulting.blogspot.com/2010/02/drill-down-to-detail-or-another-report.html
regards
Jorge
p.s If this answers your question then please grant the points and close the thread

Drill down report display of text for z fields

Similar Messages

Maybe you are looking for