Drill down report is showing popup even though it's disable in column properties

Hello,
I am facing an functionality issue where I have crated Summary to drill down report. Summary is chart and drill down is table view and I am using OBIEE Action link here.
Now I have disabled the Popup in column properties so when user click the bar on the graph they will directly navigate to detail report. But strangely after disabling the Popup, when i click on bar the drilldown report is coming as popup link.
does anyone has any idea how to handle this issue??

It would seem to be a issue with either the hardware of the printer or the replacement cartridge. If it is the cartridge, it should be covered under warranty (if it is HP genuine) since you just purchased it. At this time I think that your best move would be to contact HP's Technical Support to see about further options for you.
The only other option would be to try another new replacement cartridge to rule in or out the cartridge being at fault.
If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

Drill-down Report, Form not completely showed in Report

Hiya!!
I'm working with Drill-down Report. Im creating a kind of P&L report but it has a lot of lines because I need to create one P&L report for every Region (Profit Center Group), and I need it in a fixed form.
The problem I have is that my Form has approximately 1080 lines but when I execute the Report (Tx FXI0), the Report just show 1020 lines and I don't have any error message. The output type I have choosen is graphical Report output "106 Navigation control, detail list" by now, but I already tried with all the possiblilities there are (Tx FXI2).
Does anybody knows If there is any limit for the output? If not, does anybody know where do I have the problem?
Thanks in advance.
Regards.
Adela Cambiasso

You can use the drill down strategy, well described by my friend Kan:
http://bipconsulting.blogspot.com/2010/02/drill-down-to-detail-or-another-report.html
regards
Jorge
p.s If this answers your question then please grant the points and close the thread

Drill down reports in portlets

I am using portal to create an MIS reporting system. I want to create drill down reports however if I try to drill down from a report portlet the other report does not show up in the same region or even on a page of that page group. Instead it uses the template specified for the report. Is there a way to drill down from one report portlet to another?

Hi Prashant,
You can try T code CJE0 - report 12KST1G . Here at least you remain in the screen of CJE0 instead of going to SAP menu after exit from the report. But this also doesn't solve your problem.
I have checked transaction code S_ALR_87013534. It is giving same problem. As suggested by Shrikant , you can raise OSS note to SAP.
Regards,
Amit More

Drill Down reports for Profit Centers and Segments

Hello Experts
I would like to down load the "Drill down reports for profit center and segments". I have found standard SAP documentation through (http://help.sap.com/erp2005_ehp_05/helpdata/EN/46/f6fc4e7a7569b5e10000000a114a6b/frameset.htm ).
As per the given guidelines, i have beening trying to down load from client 000, the spool request is showing finished (with out any error and in one / two seconds) .. but the reports are appearining in SAP Easy Acess.
I have checked with Basis team, whethere i have restrictions with my userid. Even with Basis id also, we are being unable to activate these reports.
Does it required any configuration / licence issues before i need to lookinto before download?
Kindly revert
Regards
Anil Kumar

Hello Experts
This is solved. However, i am mentioning the solution here for further references
Before downloading the drill down reports, we need to activate the business funciton "FIN_GL_CI_1" through T.Code SFW5
Regards
Anilkumar

Drill Down Report by Grouping Data

I am using Apex version 4.
I'm wondering if there's a way to create a drill down report by grouping data and having a plus (+) symbol (or some other symbol) next to the group so the end user can expand or collapse as they want. So similar to how it works in Microsoft Excel.
So I'm looking to build a report that looks something like:
Market Office Revenue
1 $200
a $50
b $70
c $30
d $50
So there would be a way to expand or collapse the list of offices.
Anyone know of any way to do this? I was hoping to avoid having to create linked reports. Even if there's no way to get the expand/collapse functionality to work, it would be acceptable to just show the data as I have in my example above.
Thanks.

Sorry, the format of my example got messed up.
It's basically a hierarchy between Market and Office. So it's Market 1, then underneath that it would be Office a, b, c, and d. One market, multiple offices. Total market revenue of $200, then each office has the amounts listed.
Hope that makes sense.

Export current view or drill down report

Post Author: Rainer
CA Forum: Exporting
My Enviroment: CR XI, Delphi, ActiveXReportViewer Hello together,how can I export the current view or a drilled down report with the COM object.I didn't find a way to get the current view object (IReport) I think there must be a solution, because the default export method can export the current view.Thanks Rainer

Post Author: jarrodnewman
CA Forum: Exporting
My setup isn't exactly the same but this might help you: I had this problem with Crystal.Net in Visual Studio 2005. This link helped me resolve it. http://diamond.businessobjects.com/node/1956
My export routine used to just export the ReportDocument object. But this object does not contain any information on the currently displayed group level. So when I built a report modeled very closely after the sample 'World Sales Report.rpt' my export routine would only export the main view even if I was drilled down into other group levels of the report. I learned that the CrystalReportsViewer object is what contains the drill-down level in the ViewInfo.ViewContext object. So the link above solved this for me.
As a side note, I also had to manipulate suppressing and unsuppressing sections on export which can't be done via the CrystalReportsViewer object. So I had to save a copy of the current ViewInfo object to local variable. Then I modified the ReportDocument object to unsuppress and suppress certain sections. Then I set this modified ReportDocument object as the RecordSource of the CrystalReportsViewer object and passed as parameters the new NonHTTPCachedReportSource object and the saved ViewInfo object to my new export routine. This allowed me to preserve the drill-down view properties but apply it to a different ReportSource. I can supply (c#) code if needed. ( I don't usually show the ReportHeader or PageFooter sections in my online view of reports but I need to show them when I export a report)...
- Jarrod ([email protected])

New to Application Express - Drill down report question

Good evening group. I'm new to this Application and DB but can't find quite the correct answer.
QUESTION 1 - I have found and successfully used the "Drill down report example". However, I am only able to do it from a brand new application. That doesn't seem quite right though.
QUESTION 2 - I dropped a column while cleaning/correcting my data but I can't seem to get rid of it from a couple of simple HTML reports. I can't find out how to remove the column (granted I am looking for the gui tool). I would use the "query source" under the "report attributes" tab but the lower section (I believe they are the joins) have me perplexed.
Any thoughts, help would be greatly appreciated.
-Dave

Hi Dave,
>> QUESTION 1 - I have found and successfully used the "Drill down report example". However, I am only able to do it from a brand new application. That doesn't seem quite right though.
I'm not being a smart alec, but I don't see the question in this.
>> QUESTION 2 - I dropped a column while cleaning/correcting my data but I can't seem to get rid of it from a couple of simple HTML reports. I can't find out how to remove the column (granted I am looking for the gui tool). I would use the "query source" under the "report attributes" tab but the lower section (I believe they are the joins) have me perplexed.
For now, don't worry about the WHERE clause of the SQL query unless the column you dropped is in the WHERE clause as well. Beginning with SELECT and up until FROM in the query statement, if you see your column, remove it from there.
If you post your query and the column to be removed, we can help further.
Joel

Drill down report...

HI abapers,
How to create drill down report in alv.
When i double click the particular field, another report has to pop up and display the details of that particular field.
for eg,
When double click the amount spent field other report has to say, For which material the amonut has spend.
Thanking You
arvind

hi arv,
for me your scenario is not clear..
you want to drill down the alv .. and show the report in the same program or you want to call another program when u try to hit the alv report..
well for drilling down the same program.. you can use the following method
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
    I_INTERFACE_CHECK                 = ' '
    I_BYPASSING_BUFFER                = ' '
    I_BUFFER_ACTIVE                   = ' '
     I_CALLBACK_PROGRAM                 = GV_REPID
    I_CALLBACK_PF_STATUS_SET          = ' '
     I_CALLBACK_USER_COMMAND            = 'TOP1'     " drill down
     I_CALLBACK_TOP_OF_PAGE             = 'TOP2'
    I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
FORM TOP1 USING UCOMM TYPE SY-UCOMM SELFIELD TYPE SLIS_SELFIELD.
READ TABLE GT_FINAL_TOTAL INTO GS_FINAL INDEX SELFIELD-TABINDEX.
CASE SELFIELD-TABINDEX.
WHEN SELFIELD-TABINDEX.
perfrom itab2_operation. " in this form you will write the code to get the data for drill dispplay
now defing fieldcatalog again : example :
    GS_FCAT-COL_POS = 1.
    GS_FCAT-FIELDNAME = 'EBELN'.
    GS_FCAT-SELTEXT_L = TEXT-001.
    GS_FCAT-FIX_COLUMN = 'X'.
    GS_FCAT-OUTPUTLEN = 13.
    APPEND GS_FCAT TO GT_FCA
and call alv display again :
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
     EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
    I_CALLBACK_PROGRAM                = GV_REPID
I_CALLBACK_PF_STATUS_SET          = ' '
    I_CALLBACK_TOP_OF_PAGE            = 'TOP2'
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
I_GRID_TITLE                      = ''
I_GRID_SETTINGS                   =
    IS_LAYOUT                         = GS_LAYOUT
      IT_FIELDCAT                     = GT_FCAT
and if you want to call another progam when u hit..u have to use..submit key work
like SUBMIT ZAFI013R VIA SELECTION-SCREEN AND RETURN.

Drill down reporting through report painter...????

hi all ,
I am generating a P & L report from report painter .....
I wish to have a drilll down option on items in rows
for eg if i click on income i should be able to see all the items of income ....
can this be done how...????
otherwise
i shall have show all the items in the report
the other thing is that can i give a company logo in the report generated by report painter...
please help as it is urgent
thanks in advance..
Nidhi
pts assured

Hi Nidhi,
couls you give me a material on drill down reporting?

Adding a characteristics to AR Drill down report for line items

I have raised an OSS note on this, but they deem this to be consulting.
I have an AR drill down report for line items
It calls the structure RFRRD20.
I need to add a value into the characteristics so I can use it in the drill down report.
I have appended the structure, added a value in TKAF for the field, and it still does not show.
Has anybody done something similar?
I am sure this is easy, but only when you know how, so if you know how to do it please can you let me know.
thanks
Mark

Hi Mark
    I am also in the same situation where i need to add two characteristics (invoice date, due date) to the AR drill down reports. I added them to the structure and TKAF table as you did, but still could not get them to the drill down reports (FDI5 or FI1).
   From your posts, i see that SAP's response was that it is not possible to add characteristics to AR drilldown reports? Did they mention any reasons or OSS notes? How did you handle your requirement, were you able to work around?
   Your suggestions would be highly appreciated.
Thanks
Vamsi

Calendar with Drill Down Report

Hello,
Everybody.
I am new to Application Express.
Please any one tell me step by step how to make calendar with drill down report.
Waiting for valuable reply.
Thanks
Rahul

Not sure if this is what you wanted, but I have links on a calendar, and when you click them, it branches to another page with details about the event.
To do this, create a calendar region. The SQL statement should have at least 2 columns: The date of the "event", and the text to display as a link. You should also choose a primary key that you want to pass to the drill down report when the user clicks. Something like this:
select hiredate date_scheduled,
          ename display_column,
          empno
   from empIn the calendar attributes of that region, there is a place to designate which column is the date, and which should be displayed. Go down a little further and set the column link. Put the page you want to show the drilldown report on, and set any variables you need to.
Hopefully that helped. Its pretty simple once you play around with it - start simple and then once you get the hang of it, make it more complex.

How to get the output data of Standard drill down report into z-program?

HI every one,
        I want to get the output data of drill down report into z-program.
       Actually,if the output is only one, I can get into z-program,
      But, Here the report consists 3 alv outputs. when double clicking function happens, it will direct to another alv output.
    Those, all the outputs of report i want to get into z-program.
PLease , give reply as early as possible.
Thank u in advance,
karthik

HI,
When i download,only one output i will get.
But,if i double-click the particular record it will show another output. I want that output also.
Like that,when i double-click particular record, it will show some other alv ouput based on record,
i wanted all those outputs.
If i copy the code, whether i face any problems?

Total Label in Drill down reports

This is a simple case scenario. I created one drill down report by Country --> State --> City and set this object as section. It has revenue Column in it. Now I did Summation on the Revenue column and it shows like this
USA -- (Section)
Column1, Column2
XXX, 3
Sum, 3
Now instead of Sum, I would like the label to replace it with country name and when I drill down to second level, it should replace it with the State name and again on level 3 replace it with City name.
Could anyone help me on achieving this. Is it doable? I have been trying to achieve this but had no success.
Thanks for your help in advance.
Rids

Yes, It can be achieved with the help of the DrillFilters() function.
You can build the logic using if-else condition. Here is the one for you:
=If(Drillfilters([City])<>"") Then [City] Else If(Drillfilters([State])<>"") Then [State] Else If(Drillfilters([Country])<>"")
Then [Country]
Regards,
Rohit

Set headers for drill-down reports.

Hi!!!
The problem we have by now is when printing a report, selected characteristis are showed in header as "multiple values" instead of showing the real values that user have choose.
Does anybody knows how to set headers for drill-down reports in order to see selected characteristics?
Thanks in advance...
Adela Cambiasso.

Sorry, me again...
I have found yet they way to show in the header the report parameters, I mean, the selection criterias that user used when execute the report... I was able to show selected characteristics inside de report but not the selection criteria...
Do you know what I have lost? or what to use for this?
Thanks again.
Adela.

Query in EIS Drill-Down Reports

Hi all:
We want to build Drill-down reports in EIS. I know the basic of creating a drill-down report. Created a sample using SQL server database and Essbase 9.3.1 dummy(test) cube.
Just to give you a background we have planning application and no Essbase-only applications.
I wanted to know is it possible to use an already existing cube in essbase to create drill down reports. I do not want to go through a process of creating the hierarchy in EIS as we already have DRM and a process around metadata creation, which is not likely to change.
Is there some tool that can take a outline and create a Model/Metaoutline in EIS ?
Please let me know in case you have any suggestions or wild ideas on this :)

The short answer is no, you can't do it that way.
EIS development flows from the relational side to the Essbase side.
The Metadata Outline cannot be built until the OLAP Model has been created. Drill through reports are LROs defined in the Metadata Outline and linked through the OLAP model to the source tables.
I tried to do the same thing four years ago and learned that EIS has to build the Essbase Outline in order to enable drill-through. In Version 11.1.2 that has not changed.
I am curious, though. I was told by my Oracle Planning instructors that EIS doesn't work with Planning. Is that no longer true?
Good Luck.
Tim

Drill down report is showing popup even though it's disable in column properties

Similar Messages

Maybe you are looking for