Drill Down Reporting in HR Module

Hello all,
I'm as functional in HR Module. I wanna learn about drill down reporting in HR Module, so i need some
documentation about it in HR Module without using ABAP program. Because i don't have any skill in ABAP.
I hope the documentation contains step by step how to config the drill down report (  contain tcode and etc ).
Just give me the URL where i should be to download it.
Point will be rewarded for great information.
Warm Regards
Edited by: Blue Inspiro on Sep 19, 2008 4:12 PM

Hi,
Hope this url is of some use.
http://help.sap.com/erp2005_ehp_03/helpdata/EN/5c/8daff6555411d189660000e829fbbd/frameset.htm
Give points if you find it useful,
Thanks,
Preetham

Similar Messages

  • KCA0 - Convert Aspect for drill-down report in ECC6

    Hello experts,
    Do you know the steps to convert an aspect (for drill-down reports) from 3.0 to ECC6? And how to add it to the list in transaction KCR0 (Execute Drill-down report). SAP has mentioned transaction KCA0 for doing a conversion after the upgrade but I am not familiar with this transaction. Please help!
    Thanks and Best regards,
    Chuong

    Hi,
    You can use all the statements in HR also.
    For getting the AB values,there are macros and function modules available.
    Macros:
    rp-imp-c2-b2.
    You need to pass b2 key values before calling macro.For eg,
      MOVE pernr-pernr  TO b2-key-pernr.(since u r using LDB)
      MOVE year         TO b2-key-pabrj. (year you need to pass)
      MOVE period       TO b2-key-pabrp. (month)
      MOVE '1'          TO b2-key-cltyp.
    have a look at these Function Modules also.
    HR_WORK_SCHEDULE_TIMES
    HR_TIME_RESULTS_GET
    HR_TIME_RESULTS_IN_INTERVAL
    HR_WORK_SCHEDULE_TIMES
    Reward points if helpful.
    Regards,
    Manoj.

  • Drill Down Report in HRABAP

    Hi All,
    I have requirement to use drill down report in HRABAP.
    I know in normal report we will use HIDE and AT LINE SELECTION case SY-LSIND when 1 we wll get the data.
    I dont know how to use this in HRABAP.
    I am using<b> provide and end provide </b> .
    How to get the data from b2 cluster for table AB.This is very urgent
    Can anybody give me the solution for this.I will reward points if it helps me.
    Thanks,

    Hi,
    You can use all the statements in HR also.
    For getting the AB values,there are macros and function modules available.
    Macros:
    rp-imp-c2-b2.
    You need to pass b2 key values before calling macro.For eg,
      MOVE pernr-pernr  TO b2-key-pernr.(since u r using LDB)
      MOVE year         TO b2-key-pabrj. (year you need to pass)
      MOVE period       TO b2-key-pabrp. (month)
      MOVE '1'          TO b2-key-cltyp.
    have a look at these Function Modules also.
    HR_WORK_SCHEDULE_TIMES
    HR_TIME_RESULTS_GET
    HR_TIME_RESULTS_IN_INTERVAL
    HR_WORK_SCHEDULE_TIMES
    Reward points if helpful.
    Regards,
    Manoj.

  • Drill Down Report 6i

    I m using this code in repeating fame
       Srw.run_report('module=JV.rep  destype=Screen  paramform=No
       vmdate='||:vdate1 ||' vm_no='||:vno1||'  vtype='||:vtype1);  
        EXCEPTION
          when srw.run_report_failure then
          srw.message(30, 'Error in reports.');
          raise srw.program_abort; showing me the error
    SRW.RUN_Report can not be invoked with batch=no
    then I added
    Srw.run_report('module=JV.rep  destype=Screen  paramform=No batch=yes
       vmdate='||:vdate1 ||' vm_no='||:vno1||'  vtype='||:vtype1);  
        EXCEPTION
          when srw.run_report_failure then
          srw.message(30, 'Error in reports.');
          raise srw.program_abort; again showing user define error
    30, 'Error in reports.
    rep-1419 r_g_vdate1 formattriggers PL/SQL Program Aborted.
    if I write this code in button it is working , but i dont want to show button on my report, because when we print this report button also print.
    how can I define above code in repeating frame?

    if I write this code in button it is working , but i dont want to show button on my report, because when we print this report button also print.And what do you expect to happen? At what time should the drill down-reports be printed? And how should they be shown?
    If you want to include the rsult in your main-report, you should create an additional query in your "main"-report.

  • Drill down report update

    Hi,
    How to add several currency value (USD, LKR) in drill down report - in Due Date Analysis for open Item report (S_ALR_87012168)
    Thanx.

    Hi,
    How to add several currency value (USD, LKR) in drill down report - in Due Date Analysis for open Item report (S_ALR_87012168)
    Thanx.

  • Drill-Down Report Printing Problem for Selection Parameters

    Dear Experts,
    Have tried to configure Drill-Down Report for Vendor Balances,
    Am having trouble when printing this drill-down report, Printing is coming OK but it comes with ALL selection parameters, for e.g, have entered 20 vendor codes for the balance display, system first prints all selection parameters and then it prints the output of vendor balances,
    User does not want selection Parameters to be printed with the Report Output. Please find below screenshot for the problem.
    Input Parameter Screen
    Report Output Screen
    Print Preview Screen (First Page - Selection Parameters)
    Your help is much appreciated, if anyone can guide me, how to switch off selection parameters from Print Output of Drill-Down Report
    Thanks
    Regards
    P

    Hello Ms. Preeti,
    Thanks for your reply, Have designed the report through FKI0 (FKI*)
    Have already looked these setting, but these are not helping really, PFB screenshot for settings am having in my system, if you have any idea which can avoid User Input Parameters from printing then it will be really great help
    Thanks for your help
    Kind Regards
    P

  • Drill Down Report Performance issue?

    Hi,
    why drill down report is slower performance comparing with Action link/Navigation method? what could be the back end processing?
    Thanks
    MRD

    Need to know/see your config to tell why it is slow, I would suggest to follow best practices for the same.
    Drill down back end process something like:
    Report fetch next level columns and the all aggregated measures are grouped by next level this may take some time unless you go with aggregate table (is part of best practices)
    Appreciate if you mark as correct/helpful

  • Hiding fields in ALV DRILLED DOWN REPORT

    Hi
    My scenario is like this i created a alv drilled down report , in that once the user executes it ,it will displays the header contents of the purchase order.
    If the user double clicks on any of the header line item it will displays the item detials of the particular header data..
    My probelm is if i double click  it i am getting the header details added with the item fields..i want to hide the header detials if i want to c the item level details..
    Can any suggest me some better ways to hide the header contents ??
    Arun Joseph

    hi,
    check ur field cat...
    R u using same name?
    If possible paste ur code here...

  • Drill down report...

    HI abapers,
    How to create drill down report in alv.
    When i double click the particular field, another report has to pop up and display the details of that particular field.
    for eg,
    When double click the amount spent field other report has to say, For which material the amonut has spend.
    Thanking You
    arvind

    hi arv,
    for me your scenario is not clear..
    you want to drill down the alv .. and show the report in the same program or you want to call another program when u try to hit the alv report..
    well for drilling down the same program.. you can use the following method
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
        I_INTERFACE_CHECK                 = ' '
        I_BYPASSING_BUFFER                = ' '
        I_BUFFER_ACTIVE                   = ' '
         I_CALLBACK_PROGRAM                 =  GV_REPID
        I_CALLBACK_PF_STATUS_SET          = ' '
         I_CALLBACK_USER_COMMAND            = 'TOP1'     " drill down
         I_CALLBACK_TOP_OF_PAGE             = 'TOP2'
        I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
    FORM TOP1 USING UCOMM TYPE SY-UCOMM SELFIELD TYPE SLIS_SELFIELD.
    READ TABLE GT_FINAL_TOTAL INTO GS_FINAL INDEX SELFIELD-TABINDEX.
    CASE SELFIELD-TABINDEX.
    WHEN SELFIELD-TABINDEX.
    perfrom itab2_operation. " in this form you will write the code to get the data for drill dispplay
    now defing fieldcatalog again : example :
        GS_FCAT-COL_POS = 1.
        GS_FCAT-FIELDNAME = 'EBELN'.
        GS_FCAT-SELTEXT_L =  TEXT-001.
        GS_FCAT-FIX_COLUMN = 'X'.
        GS_FCAT-OUTPUTLEN = 13.
        APPEND GS_FCAT TO GT_FCA
    and  call alv display again :
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
         EXPORTING
      I_INTERFACE_CHECK                 = ' '
      I_BYPASSING_BUFFER                = ' '
      I_BUFFER_ACTIVE                   = ' '
        I_CALLBACK_PROGRAM                =  GV_REPID
      I_CALLBACK_PF_STATUS_SET          = ' '
        I_CALLBACK_TOP_OF_PAGE            = 'TOP2'
      I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
      I_CALLBACK_HTML_END_OF_LIST       = ' '
      I_STRUCTURE_NAME                  =
      I_BACKGROUND_ID                   = ' '
      I_GRID_TITLE                      = ''
      I_GRID_SETTINGS                   =
        IS_LAYOUT                         = GS_LAYOUT
          IT_FIELDCAT                     = GT_FCAT
    and if you want to call another progam when u hit..u have to use..submit key work
    like  SUBMIT  ZAFI013R VIA SELECTION-SCREEN AND RETURN.

  • Drill down reports in character mode

    How to make drill down reports in character mode(remember not bitmapped)using report designer 6
    null

    I solved the problem in UNIX with this script, replacing the special characters:
    sed -i 's/special_1/¡/'  $salida
    sed -i 's/special_2/¢/'  $salida
    sed -i 's/special_3/£/'  $salida
    sed -i 's/special_4/¤/'  $salida
    sed -i 's/special_5/¥/'  $salida
    sed -i 's/special_6/¦/'  $salida
    sed -i 's/special_7/§/'  $salida
    sed -i 's/special_8/¨/'  $salida
    sed -i 's/special_9/©/'  $salida
    sed -i 's/special_10/ª/' $salida

  • Drill down report export to pdf

    Hi,
    I have a drill down report that i need to export to pdf.to get the drill down facility, I used 'HIDE' option for the groups.
    The drill down works in crystal.But when I export the crystal report to PDF, I could not see the hidden groups/Tabs, and my drill down doesn;t work.Please suggest me what to do while exporting a drill down report to PDF. Is it possible to export a drill down report to Excel?Can someone suggest the precaustions to be taken while exporting to different formats??
    Thank you,
    Tatyana.

    Drill-Down behavior in Crystal doesn't carry over to pdf exports.
    Using one of the 3rd-party Crystal Reports schedulers listed at http://www.kenhamady.com/bookmarks.html you can achieve similar behavior in pdf exports by automating the process of:
    1. exporting the main report to main pdf.
    2. Bursting a detailed report to individual pdf files
    3. using Crystal formulas embedded in the main report to generate live links from the exported main pdf to the individual detail pdf files.

  • Drill down reports (Reports 3.0)

    I am trying to create a series of drill down reports using
    Reports 3.0. To do this I have created buttons in each report
    which pass parameters to the next report using the
    srw.run_report package. I have a problem with the lowest level
    report where no errors are reported but the report is generated
    as a blank page. When run in isolation, i.e. filling in the
    paramters manually, the report works perfectly well. Does anyone
    have any ideas? Also, when passing more than one parameter, do
    you just have to use the concatenation operator (

    nicola (guest) wrote:
    : I am trying to create a series of drill down reports using
    : Reports 3.0. To do this I have created buttons in each report
    : which pass parameters to the next report using the
    : srw.run_report package. I have a problem with the lowest level
    : report where no errors are reported but the report is generated
    : as a blank page. When run in isolation, i.e. filling in the
    : paramters manually, the report works perfectly well. Does
    anyone
    : have any ideas? Also, when passing more than one parameter, do
    : you just have to use the concatenation operator (

  • Customized drill-down report cannot go to line item level (FGI4 and FGI1)

    Hi Expert,
    I created a customized drill-down report using New GL features, as follows:
    FGI4 create form, with reference to form: 0SAPBLNCE-01
    FGI1 create report for the form created.
    After that I set some things like characteristic, variables, and output type.
    When I execute the report, the data shown cannot be drill-down to line item level:
    Goto > Line Item (this function is disabled).
    Kindly advise why I cannot goto line item level, where I copy from standard form: 0SAPBLNCE-01, which ha sthe features of drill-down to line item level.
    Thanks
    sbmel

    Hi sbmel,
    For calling up a line item report in a drill down report you need to make the below settins:-
    - You first have to generate the line item report with program RGRGENSI for your summary table.
    - Then assign the generated line item report to the summary report.
               Assiging the report is part of the 'Change drilldown report' function, which you reach by activating the characteristic selection field and then Extras -> Report assignment.
                In the dialog box that appears, choose the 'Other report type' function and insert the line item report generated earlier, as an ABAP report
    Regards,
    Gaurav
    Edited by: gka2707 on Jul 19, 2010 8:07 AM

  • Drill Down Report in screen painter

    Hi Experts,
    I have a requirement in dialog programming/screen painter to create a 2 level drill down report. for eac page of the report, it should only contain 10 entries then to view the other entries (11 and up), the button for next page should be click (there is also back button).
    First question is how will I have the drill down report (alv list type?) in screen painter?
    Second question is how should I process the logic mentioned above (next and back) in screen painter/dialog programming?
    Thanks in advance for all teh support. Points will be rewarded.
    Cheers,
    Kurtt

    Hai,
    Go thru this Threads u ll get an idea,
    Drill down report help
    Re: regarding Drill Down Reporting
    drill down capabilities for an alv grid display field using oops concept
    Regards,
    Padmam.

  • How can I activate drill down report for planned line items please urgent?

    Hi Everyone,
    Please suggest me how can i activate drill down report for planned line items in internal orders. S_ALR_87012993. Please suggest me, I'll award full points. I am unable to do it in client system, which has already line items. I tried in my sys with new config it is working.
    Kind regards
    Arvey.

    Hi
    It is based on the reports attached in the Report Group - TCODE: GR53
    In the Report Group screen
    Press CONFIGURE – This is to attach any Drill Down reports.
    Press the “Insert Line” icon
    As is the screen may be used to insert a Report Writer report group. To add an ABAP, press “other report type”
    Double click on “ABAP Reports”
    Enter the name of the ABAP and ENTER
    <b>RCOPCA08                       Profit Center: Plan Line Items</b>
    VVR

Maybe you are looking for