Drill down reports using SVG component
I've created and dynamic report and an SVG chart following the examples of the tutorials. I was wondering if, and how, it was possible to create drill-down reports i.e report on colour, then clicking on that colour would reveal the types of car and so on. Does anyone have an example?
Thanks
Darren
Darren,
The query for an SVG chart requires 3 columns: Link, Label, and Value. You use the Link value to provide a link to another page. This link can also pass parameters to the next page.
If you set up a page for each "level" of your drill-down (e.g. color, type of car, etc), you can link from the higher-level page to the lower level page and pass the value that was clicked on in the chart.
Take a look in the HTML DB User's Guide for the section about "Using f?p Syntax to Link Pages": http://download-west.oracle.com/docs/cd/B14117_01/appdev.101/b10992/mvl_fund.htm#BEIJCIAG
You would use that syntax in the Link column of the query for your chart. Here is part of a query I used to drill down from one pie char to another (on page 3), passing the selected project to a variable called P3_PROJECT.
select 'f?p=&APP_ID.:3:&SESSION.::NO::P3_PROJECT:' || Project L,
Project, sum(Time)
from v_timesheet
where ...
Does that help?
Similar Messages
-
How to call a drill down report using hyperlink ?
Can anyone please give an example to call a drill down report using hyper link in Reports 10g ?
Regards
Capri !!!Hi,
I've been using this approach in a couple of reports and it works great with one problem. Even if I include the srw.set_hyperlink_attr('target=_new") it still launches the drill report in the current window. When the user hits the back button it doesn't take them back to the main report it takes them back to the reports/rwservlet? page. Can you see if there is anything I'm doing wrong...would be a really cool report if I could force it to open a new window.
Here is what my code looks like:
srw.set_hyperlink(:P_SERVER || 'dwn&report=transaction2_v8.rdf' ||
'&PARAM_COMP_NUM=1' || '&PARAM_ACTV1=' || TRIM(:actvty_cd) || '&PARAM_ACTV2=&PARAM_ACTV3=&PARAM_ACTV4=&PARAM_ACTV5=&PARAM_ACTV6=' ||
'&PARAM_START_DATE=&PARAM_END_DATE=' || '&PARAM_FY_NUM=' || vYear || '&PARAM_PERIOD=0' || '&PARAM_ACTVTY_GRP=%20' ||
'&PARAM_LIST=%20' || '&PARAM_START_ACCT_CAT=' || TRIM(vCat) || '&PARAM_END_ACCT_CAT=' || trim(vCat2)|| '&PARAM_SYS_CODE=%20' ||
'&PARAM_SRC_CODE=%20' || '&PARAM_DATA_TYPE_CD=P' || '&PARAM_ACT_STATUS=%20');
SRW.SET_TEXT_COLOR('blue');
srw.set_hyperlink_attrs('target=_new');
Also I get different behavior if the user saves the PDF and opens the report through their pdf reader.
Thanks for your help -
Drill Down Report using Crystal reports in eclipse and jspviewer
Hi
I want to understand how to write a drill down report since I have a requirement for my project, so I tried to run the sample drill down.rpt that is available with Crystal Reports 2008 Complete Reference book by George Peck.
I can see the results correctly( i.e. can drill down) in the preview tab . Since I am working inside the eclipse, the way I run the reports is first "Create report viewer JSP" by right clicking the report and have a url mapping to this jsp. I am running the reports from a hyperlink that maps to the url which will launch the jsp.
the jsp is:-
<%@ page contentType="text/html; charset=UTF-8" pageEncoding="ISO-8859-1" %><%@ taglib uri="/crystal-tags-reportviewer.tld" prefix="crviewer" %><crviewer:viewer reportSourceType="reportingComponent" viewerName="Drill Down-viewer" reportSourceVar="Drill Down" isOwnPage="true" allowDrillDown="true">
<crviewer:report reportName="reports/Drill Down.rpt" />
</crviewer:viewer>
The one that was created by "Create report viewer JSP" did not had "allowDrillDown" attribute at all .But I added it since it isnt working.
So when I launch my web app and click on the link to run the report, I get the report results but only to the summary level. When I double click the summary level I get a 404 error page.
Can please anyone suggest what is going on.
Thanks
poonamOk. So, you added the report to the project. Now we have to add the CR assemblies to the project, add the viewer (if need be) and fire it off. Simplest code would be:
Public Sub New()
' This call is required by the designer.
InitializeComponent()
' Add any initialization after the InitializeComponent() call.
CrystalReportViewer1.ReportSource = ("path to report")
End Sub
In this case you are using the viewer SDK to runt he report. The report will prompt for any logon parameters - but you can code these also. You can load the report via the engine as bellow. Again, the report will prompt. I prefer to use the engine as it is way more "extensible"...
Public Sub New()
' This call is required by the designer.
InitializeComponent()
' Add any initialization after the InitializeComponent() call.
Dim crReportDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument()
crReportDocument.Load("path to report")
'Bind the report to the viewer
CrystalReportViewer1.ReportSource = crReportDocument
End Sub
If you have a report added to the project (strongly typed) the code would be:
CrystalReportViewer1.ReportSource = New myReport()
For more details, I'd recommend looking at the sample app vbnet_win_simplepreviewreport.zip available from the following location:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
The developer help files are here:
[SAP Crystal Reports .NET SDK Developer Guide|http://help.sap.com/businessobject/product_guides/sapCRVS2010/en/crnet_dg_2010_en.zip]
[SAP Crystal Reports .NET API Guide|http://help.sap.com/businessobject/product_guides/sapCRVS2010/en/crnet_api_2010_en.zip]
- Ludek -
Drill Down report using Webdynpro
Hi Guys,
Is it possible to develope a drill down report in Webdynpro?
If yes, can somobody direct me to any tutorial for creating Drill Down Webdynpro Report.
I need to convert an ABAP drill down report to Webdynpro Drill Drown.
Thanks,
miniHello,
Yes, it's possible, using the linktoaction element please see this: [/people/david.halitsky/blog/2006/09/22/learning-what-you-dont-need-is-as-important-as-learning-what-you-do-parts-10b-c-of-event-driven-tutorial-on-wdrtestuielements] and [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/db22242d-0701-0010-28a2-aeaa1fefd706].
Regards. -
Drill down reports (Reports 3.0)
I am trying to create a series of drill down reports using
Reports 3.0. To do this I have created buttons in each report
which pass parameters to the next report using the
srw.run_report package. I have a problem with the lowest level
report where no errors are reported but the report is generated
as a blank page. When run in isolation, i.e. filling in the
paramters manually, the report works perfectly well. Does anyone
have any ideas? Also, when passing more than one parameter, do
you just have to use the concatenation operator (nicola (guest) wrote:
: I am trying to create a series of drill down reports using
: Reports 3.0. To do this I have created buttons in each report
: which pass parameters to the next report using the
: srw.run_report package. I have a problem with the lowest level
: report where no errors are reported but the report is generated
: as a blank page. When run in isolation, i.e. filling in the
: paramters manually, the report works perfectly well. Does
anyone
: have any ideas? Also, when passing more than one parameter, do
: you just have to use the concatenation operator ( -
Customized drill-down report cannot go to line item level (FGI4 and FGI1)
Hi Expert,
I created a customized drill-down report using New GL features, as follows:
FGI4 create form, with reference to form: 0SAPBLNCE-01
FGI1 create report for the form created.
After that I set some things like characteristic, variables, and output type.
When I execute the report, the data shown cannot be drill-down to line item level:
Goto > Line Item (this function is disabled).
Kindly advise why I cannot goto line item level, where I copy from standard form: 0SAPBLNCE-01, which ha sthe features of drill-down to line item level.
Thanks
sbmelHi sbmel,
For calling up a line item report in a drill down report you need to make the below settins:-
- You first have to generate the line item report with program RGRGENSI for your summary table.
- Then assign the generated line item report to the summary report.
Assiging the report is part of the 'Change drilldown report' function, which you reach by activating the characteristic selection field and then Extras -> Report assignment.
In the dialog box that appears, choose the 'Other report type' function and insert the line item report generated earlier, as an ABAP report
Regards,
Gaurav
Edited by: gka2707 on Jul 19, 2010 8:07 AM -
Hello Experts,
we are implementing oracle EBS R12.1.3 for our one of the client, and they want the feature like drill down reports.
As per my knowledge we cannot create drill down report using oracle reports builder. client doesnt have license for oracle discoverer.
Can I achieve the drill down feature by XML publisher? If yes How??
Thanks,
AtulHi Atul;
please check below thread:
R12: drill down XML Publisher Template
Regard
Helios -
How to add the required characterists and key figures to drill down report?
hi,
i am creating a drill down report using t.code FKI4. however i noticed that some of the characteristics and key figures required by me is not listed in the report catalog. how can i add the required characteristis and key figures to the report catalog?Hi Inna,
Based on my research, a drilldown report is a layout design that at first hides complexity and enables the user to toggle conditionally hidden report items to control how much detail data they want to see. Drilldown reports are used to change the report
layout interactively. So it wouldn’t affect the rows displayed in the outmost group. Though some rows are hidden when the report is initially run, it will still count them. This is by design.
Furthermore, if I understand correctly, you also expect the outmost group is a dynamic group depends on the drilldown action, right? As per my understanding, this function still cannot be achieved at this moment.
Thanks for your understanding.
Regards,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support -
Drill Down reports must be selected using precisely one ledger
hi all,
whenever i am trying to execute the report from FGI4(report painter), this error message is coming:-
Drill Down reports must be selected using precisely one ledger
can you please help me with solution?
indranilHi,
Please give ledger in the selection as 0l or 0f or press F4 & select there.If you are creating your own report then you must assign characterstic ledger to your report.On that basis system will fetch data.
points if found useful.
regards,
Abhijit -
Product Drill Down Reporting and Using KKC7/KKC8 & KKRV
Hello Guys,
Need some expert advise on my issue.
1. I have created a product group using T-code KKC7 and assigned materials to my product group.
2. I have done some material movement posting using 261 on these materials.
3. Next I run KKRV to collect data
4. Next I run Report S_ALR_87013139
I expect to see drill down report by product group but I dont see anything?
Is there something else which needs to be set?
In spro I have checked reporting control parameters and its all good.
Please share your thoughts.
Regards,
SanjeevDear Sanjeev,
Did you get an error or information message when you execute S_ALR_87013139?
Best regards,
Jason -
Use different Layouts for Summary and Details in Drill down report
Hi All,
I have a 2 level drill down report in ALV.
The summary report has certain fields and the Detail report has different fields. Now my problem is that when i use a default layout (with all fields of summary report) for the summary report, and drill down to the detail report i'm missing the fields on detail that are not in Summary. And if i save the default layout as default (with all fields of Detail) and go back to sumary, I'm missing the some other fields on summary (which are not on detail report).
Is there a way to make different default layouts for each of those summary and detail reports:
Also as the layouts are choosen by the user, i cannot hardcode any particular layout;
So if the user chooses a layout for detail; it has to stay the same layout for the detail report if he goes to summary and then back to detail; unless the user changes the layout again.
I'm using two different Layout types for each report. but i still cannot get the desired effect.
Data:
gt_layout_s type slis_layout_alv,
gt_layout_d type slis_layout_alv,
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = g_repid
is_layout = <b>gt_layout_s</b>
i_callback_top_of_page = g_top_of_page
i_callback_user_command = g_user_command
i_callback_pf_status_set = g_status
i_save = g_save
is_variant = gs_variant
it_fieldcat = gt_fieldcat[]
it_events = gt_events[]
importing
es_exit_caused_by_user = gs_exit_caused_by_user
tables
t_outtab = it_summary.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = g_repid
is_layout = <b>gt_layout_d</b>
i_callback_top_of_page = g_top_of_page
i_callback_user_command = g_user_command
i_callback_pf_status_set = g_status
i_save = g_save
is_variant = gs_variant
it_fieldcat = gt_fieldcat[]
it_events = gt_events[]
importing
es_exit_caused_by_user = gs_exit_caused_by_user
tables
t_outtab = it_detail_disp.Here is how you differentiate between the layout of two different grids. There is the parameter, IS_VARIANT in the function. You usually leave it empty or pass only the report name and username. <b>What you need to do is to pass unique string for each grids to the HANDLE field of the parameter IS_VARIANT.</b> You can probably hard code it as HEADER and DETAILS in your case. Once that is done, system identified that these two different layout for different grids.
Regards,
Ravi
Note : Please mark all the helpful answers<u></u> -
Drill down report without using heirarchies in OBIEE11g
Hi,
Can we create multiple column drill down report without using hierarchies in OBIEE11g?
Kindly let me know the solution.
Thank you!
-HarshithYes, It can be done, but for each drill level you will require one seperate report. Drilling can be achieved using OBIEE Report Navigation.
For eg. If I have to create a drill report which starts from Year and goes to QTR and then to Month level. That means I have to create 3 reports.
1. A year report which will have report data at year level (Consider Year, Product, Order_QTY and Order_Amt are the columns)
2. A QTR report which will have report data at Qtr level. This report will have Year column in filter section as IS PROMPTED (Consider Qtr, Product, Order_QTY and Order_Amt are the columns).
3. A Monthly report which will have report data at Month level. This report will have Year, Qtr column in filter section as IS PROMPTED (Consider Month, Product, Order_QTY and Order_Amt are the columns).
Then we can go to Yearly report and put the OBIEE navigation on Year column and our target report will be QTR report. Similarly in Qtrly report put the OBIEE navigation on QTR column and our Target report will be Monthly report.
This way you can impliment drilling without hierarchy.
For step by step see below URL:
http://www.askjohnobiee.com/2012/07/how-to-drill-through-guided-navigation.html
Appriciate if you can mark Correct.
Thanks,
Kashi
Edited by: K N Yadav on 4 Jun, 2013 10:27 PM -
Multi-Use Drill Down Reports?
Hi,
I'm just starting out with reporting in SSRS so this may be a silly question but I'm struggling to find a way to do what I want :)
I have a large graphical report with several top 10 reports on different a cube. (eg. top 10 number of events, top ten numbers of computers affected)
I want drill down reports for both the Event Name and Computer Name, also to be able to click on the header of the report and get a complete unrestricted report. I have created a drill down report that has all the data and if I choose one item (say computer
name) I can drop down to the drill down and filter the table in that with the computer name and return any results for that computer. I cant figure out how to have a secondary link that passes a wildcard to returns all results. I'd also like to have the ability
to send an event name to the same drill down and a wildcard for the computer name. However I cant figure out how to get the filter on the table to accept any wildcards.
I dont want to have to create multiple reports for each of the different drilldowns, is this possible? (Easy to understand answers for a newbie if possible :) )Hi Chris_C2000,
If I understand correctly, you have configure “Go to report” action in your report. It is Drillthrough in SSRS. You want to pass a value link to the corresponding report. We can add parameters in the drillthrough report, then pass parameters values to the
report.
I have create a simple report in my test environment. Suppose we have the same dataset (DataSet1) in main report and subreport with two fields: CalendarYear, SalesAmount. Please refer to it.
Subreport:
Add a table in the report body, fill with CalendarYear, SalesAmount fields.
Add another dataset (DataSet2) with CalenderYear field.
Add a parameter (CalenderYear) get Available Values from DataSet2 CalenderYear field.
Add filter in the DataSet1, with values below:
Expression: [CalenderYear]
Operator: =
Value: [@CalenderYear]
Main report:
Add a chart in the report, fill SalesAmount in the Values dialog box, CalenderYear in the Category Groups dialog box.
Right click the bar in the chart, click Series Properties.
Click Action in the left pane. Select “Go to report” option.
Select the subreport below “Specify a report” prompt.
Click Add icon below, and fill with following values:
Name: CalenderYear Value: [CalenderYear]
Then, when we preview the report, we can click the specific bar link to the subreport get the corresponding data.
Reference:
http://technet.microsoft.com/en-us/library/aa337477(v=sql.105).aspx
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support -
Drill Down Report FI, GL Balance Display
Dear Expert,
I am creating report with form using Drill Down Report GL Balance in FI using FIG1,2,3....
I added formula column, in this formula column, I try to put variable inside the formula, but system always said:
<<<Incorrect formula component = &1YF>>>
I added the below:
X001 / &1YF
In which X001 is first column value, and &1YF is global variable for fiscal year.
Please help me on what error is about so that I can fix.
Many Thanks,
KimC.
Edited by: Kim, CheolYeon Lee on Jan 18, 2011 10:25 AM
Edited by: Kim, CheolYeon Lee on Jan 18, 2011 10:26 AMCan you elaborate what are you trying to achieve exactly? as you may know there are cell level formulae and column level. Let us know.
Regards
Subodh -
Hiding fields in ALV DRILLED DOWN REPORT
Hi
My scenario is like this i created a alv drilled down report , in that once the user executes it ,it will displays the header contents of the purchase order.
If the user double clicks on any of the header line item it will displays the item detials of the particular header data..
My probelm is if i double click it i am getting the header details added with the item fields..i want to hide the header detials if i want to c the item level details..
Can any suggest me some better ways to hide the header contents ??
Arun Josephhi,
check ur field cat...
R u using same name?
If possible paste ur code here...
Maybe you are looking for
-
2nd Gen Shuffles charge with power adapter, not seen at all by computer
I have three Gen 2 Shuffles (mine and kids), and am having same problem with all three. If I plug them into either of our home computers - an iMac and a brand new Macbook Pro - they don't even seem to be recognized at all by the computer as even bei
-
FOREIGN KEY CONSTRAINT 의 MASTER TABLE NAME 의 확인
제품 : ORACLE SERVER 작성날짜 : 1995-11-02 FOREIGN KEY CONSTRAINT 의 MASTER TABLE NAME 의 확인 =================================================== 다음은 FOREIGN KEY CONSTRAINT 이름으로 REFERENCE 하는 TABLE (MASTER TABLE)을 찾는 SQL SCRIPT이다. col Primary_key_table format
-
My ipad says disabled. How do I fix this?
My ipad says disabled. How do I fix this?
-
Upgraded to os7 now my mifi keeps cutting off
Recently upgraded to OS 7 my iPad , after doing so trying to work my MiFi keep going dormant and disconnect having to restart the MiFi every few minutes is turning into a real hassle . Not sure why it was working fine befor the upgrade . I appreciate
-
Project Oxford. Can I use the Face API for law enforcement app
Hello, I am a .Net developer and have recently learned of Microsoft's Project Oxford. I am very much interested in developing an app using the Face API but, had a question regarding the code of conduct. Specifically it states: People who use your app