Drill down through the chart

I have a pie chart in one analysis. It is based on the company name and number of employees. My requirement is to show particular company information when I click on particular section of chart. Currently I am trying this with Criteria->column->column properties->interaction->primary interaction.
I have created another report which is containing all the company information. but I am getting information of all companies instead of particular company. So, How can I get information of particular company?

did u make that column as IS prompted in 2nd report...In ur case Company name.

Similar Messages

Drill down from the charts of VC

Dear gurus,
   can I realize the functionality of drilling down from the charts of VC?
   For example, I have a bar chart. Can I drill down from each bar of chart to detailed infomation about that bar?
   Please advise. I'll assign points if helpful. Thanks in advance.
Jin Ming

Hi
I hope you will get answer from this solved using pop up window for drill down
Thanks & Regards
Harsimran

Double-clicking on a Analytic chart element to drill down to the next level Performance Point Service

Hi,
How to Drill Down the Analytic Chart on Double Click on the chart bar in SharePoint Performance Point Service.
Double-clicking on a Analytic chart element to drill down to the next level Performance Point Service.
I have connected with Cube. I am working in SharePoint 2010.
Thanks & Regards
Poomani Sankaran

It has to do with the order you enter the fields in the Business Model from Physical model! It must be the opposite way than the one you want them to be show. In your case, you must first delete both fields from your business model, then drag tham in with first the "name" field and then the "code" field.
It did work for me!

Drill down via the legend icons

Hi,
I created a line chart. Via navigate it's possible to drill down to a another report. Is it also possible to drill down via the legend icons?
Thanks, Robbert

hi,
For this u can add one custom graph for the legends and enable the drill down on that legend
please go through this thread
refer obiee Guru John's reply
Re: How to show only legend in graph?
thanks,
saichand

Drilling down from OmniPortlet chart to detailed chart in same OmniPortlet?

I am trying to use OmniPortlets to create a dashboard of charts showing different metrics.
I want to be able to drill into each chart to get a more detailed chart in the SAME OmniPortlet frame with all the other charts being unchanged. So if I have 3 OmniPortlet charts C1, C2, C3 in the same page, I want to be able to click on C1 and to be able to drill into C1 (details), C2 and C3.
I am trying to do this through OmniPortlet events, parameters and page parameters.
1) I've defined a OmniPortlet Param1 to parameterize the source of data - So my source URL is http://<URL-base>/##Param1##
2) I then defined a Page Parameter PP1 that is associated with Param1 and set a default value for this (to make sure ##Param1## gets set for the top level chart). I set this default value in the OmniPortlet Parameters page - (otherwise, the ##Param1## seems to map to a null sting despite the Page Parameter PP1's default value)
3) Finally, I defined an OmniPortlet event that gets fired when I click on the chart. The Event sets as one of its parameters, the data source that has the drilldown data. This column name is PP1.
So, the chart should first display with the data source URL being initialized from the Page Parameter. When I click on the chart, the Event should set up a new parameterized value in the data source so that next chart with drill down data is shown after a page refresh.
The reality is different from this theory. When I click on the chart, for some reason, the value of Param1 for refreshed Omniportlet display seems to be getting blanked out. So my chart definition gets messed up since the data source is now invalid. The page however continues displaying the original (pre-drill) chart from the cache.
2)
I don't know whether this problem is because of an improper use of the Page Parameters and OmniPortlet events or whether this is because I seem to be forced to set Param1's default value (maybe this is overriding my data source URL even in the drill down chart).
There seem to be some examples of the chart click causing another chart to refresh. These docs don't have a lot of detail, plus I want the SAME OmniPortlet to show the drill down chart.
Has anybody done this? Any pointers would be appreciated..

Hi Sebastian,
You cannot have drill downs from different charts to the same target.
As per your scenario you have 3 column charts with warehouses displaying their respective 3 KPI's values. I believe you would have created a series each for available warehouses. If you have selected drill down on load for all the column charts with one single target then at load all the three column charts will try to place the destination of their selected series(based on warehouse selected) to the same target.
And also as you mentioned when the user tries to select the same chart again the target doesn't change, the reason is the same as all the charts are trying to put the destination of the series in the same cell.
Instead of doing it this way, what you could do is to name the series of all column charts the same and have the series name put into one cell. Then based on this series name you can lookup the data for that warehouse and display it in the line chart.
Here again the user has to select the same warehouse in all the three column charts else it wont work.
Hope this was useful =]
Thanks & Regards
Arjun.C.T

Drill-Down from several Charts to Same Target

Hi,
we have built a dashboard with 3 (soon to be 6) column charts and one line chart below. The colum charts represent 6 KPIs aggregated for a year for different warehouses. Each warehouse is a specific series (because we want them to have a individual colors). When the user clicks on a warehouse in one of the column charts, we want the line chart above to show the
For this purpose, we have all column charts store drill-down values to the same two cells:
- One cell stores the series name (warehouse selected)
- One cell stores the name of the clicked line chart (we use a single cell with the chart name as source for the first series of each chart. After the first series is selected as the default drill-down, this source and destination seems to be used for every series selected, which might be a bug)
Our problem is, all queries for the charts are loaded at startup. The default drill-downs for all charts are done, and we have a random chart in the drill-down destination. If the user clicks the same chart again, we do not notice this as the value of our target cell does not change. We have tried several solutions for this, but nothing is really satisfactory.
Does any of you have an idea, or a similar dashboard maybe, where the drill-down of several charts (preferably with several series per chart) is stored into a single target chart?
Thanks & Regards,
Sebastian

Hi Sebastian,
You cannot have drill downs from different charts to the same target.
As per your scenario you have 3 column charts with warehouses displaying their respective 3 KPI's values. I believe you would have created a series each for available warehouses. If you have selected drill down on load for all the column charts with one single target then at load all the three column charts will try to place the destination of their selected series(based on warehouse selected) to the same target.
And also as you mentioned when the user tries to select the same chart again the target doesn't change, the reason is the same as all the charts are trying to put the destination of the series in the same cell.
Instead of doing it this way, what you could do is to name the series of all column charts the same and have the series name put into one cell. Then based on this series name you can lookup the data for that warehouse and display it in the line chart.
Here again the user has to select the same warehouse in all the three column charts else it wont work.
Hope this was useful =]
Thanks & Regards
Arjun.C.T

Drill Down in Pie Chart not working in IE8 / Mozilla 5

Hi Experts,
In my dashboards, drill down feature in Pie charts are not working if the flash is viewed in IE8 / Mozilla Firefox 5.
In IE7 it is working. Is there any browser settings required for this ? Pls suggest.
Drill down in column chart is working fine.
Xcelsius Version: Xcelsius 2008 SP3 FP 3.5
Browser Version: Firefox 5.0 / IE 8
Many thanks,
PASG

Hi,
You may want to download Xcelsius 2008 with SP4.
SP4 will support the newer IE 8 (32 bits) for Xcelsius related issue.
As for FireFox 5 that came out last week, this won't be supported anytime soon.
Regards,
Ken
Edited by: Ken Low on Jun 27, 2011 8:50 AM

Drill down a bar chart in new window/ browser?

Hi,
Could anyone suggest me how to drill down a bar chart into another bar chart in new window or browser.
I was wondering if anyone had any ideas or know of any examples of how I might do this?
Thank you
Ram

You can use a "javascript:window.open(...)" URL with navigateToURL and pass parameters for the new bar chart in the query string.
Hi,
If you don't mind, Could you please explain me in more detail about "javascript:window.open(...) URL with navigateToURL"
do I need to place it in the Flex code or Java?
Thank you
Ram

Drill down on bubble chart

Hi all,
I am having a bubble column chart. when drill down the bubble chart. one more chart will display. is it possible to open the drill down chart in new window?
& how can I drill down on bubble chart
similar to this report
http://www.recovery.gov/?q=content/investments
Thanks

Priya,
You need to use drill down option in Bubble chart and dynamically display Chart placing it in a Panel container. It is similar to this http://xcelsiusandme.blogspot.com/2009/07/xm-sample-2-pop-up-with-url-button.html
Instead of Report 1 button...have drill down from bubble chart.
-Anil

How to configur Drill down on Bubble Chart

Hi,
Can anyone please hel me with examples - how to confihure drill down on bubble chart.
that means,
1) whenever the user clicking the bubbles - the pop up window should display some notes related to that bubble
and also in another requirement
2) whenever the user click the bubble - the pie chart should display the values related to that bubble.
please help me on achieving the same..

If the Bubble size is constant we can do this.But as you know Bubble sizes varies from once to one place..It will be tough scenario if you want to do it here..Instead take a label based menu and try to use dynamic visiblity .And show labels in there which contains the text for the respective labels..

Drill down feature on charts

Hi,
I was exploring the strenght of XML Publisher enterprise to support 'interactive' dashboards. Reading thru the several docs and samples, i see that charting is possible in it. But is there a mechanism to have interactive dashboards/charts
Say the user clicks on one of the pie of the pie chart and it further drill downs to the detail of that section.
Please let me know if you require any further clarifications for my question
TIA
Darmesh

Hi All
We do not yet support drill down on chart objects ... the chart libraries we use do not yet support so we cant. You can place drill down links on text values thou. Please take a look at the user guide for BIP and check out the dashboard sample provided with the BIP5.6.2 or 10.1.3.2.x releases. Both have drill down examples
Tim

Return Option after drill down in the DB

Hello,
Got a requirement to remove return option after drill down in the Dashboard?
Appreciate your help in achieving this.
Thanks,
Gouda.

Gouda,
Check this,
Sasi Nagireddy
Mark if helps,
Thanks,

Drill Down in Pie Chart

In Xeelsius 2008 when I click on the Drill Down tab of the Pie Chart then the total tab is in disable mode so unable to add the drill down property.Please suggest me how to proceed

Hi
For default data drill down is disabled.
So to enable drill down, You have to pass the data, present in General tab.
Hope this will solve your Problem.
Regards
Rush-me

Drill Down in Column Chart

I am fairly novice in Xcelsius and am having issues in understanding the User Guides instructions on enabling drill down. Under series name I have the titles of the sub categories I would like to 'drill down,' is this correct? I have filled in all of the necessary options but it doesn't seem to be working. I only want to drill down one of my series, I'm assuming that's not an issue?

I am not 100% clear with what kind of model you are trying to design and what data you are taking. Still i am explaining you the in short how Drill function works with an example.
I have a data of employees and salary and I want to create a column chart1 which will display the composite values of all the engineers and salary.Engineer name on X-axis and Salary on Y-axis.
Now I also want a chart which will display the salary of the emplyees individually which will be displayed after clicking on the particular salary bar from the Chart1.
This is when drill down functionality comes into picture.
Do achieve this we take another column chart2. Now in Chart1 properties go to Drill down section and under the series you find a tab Insert in. Select a blank cell just under the salary column and map it.And in the source data section select the entire Salary column.
incase you want to drill on multiple columns then select multiple columns on source data and also select multiple blank cells just below the multple source columns. Preferably highlight those cell with colours.
Now in Chart2 go to property and select that particular blank cells under Data range section same as you selected in drill down>insert in.
Now chart1 is linked to Chart2.
whenever you click on any one salary bar of any engineer the corresponding chart2 will display salary of that particular engineer.
I would also request you to go to the installation folder where you will find a folder called samples under which you will get lot of sample models inlcuding drill down model which will give you a better understanding of how the drill down concept is used.
Hope this reply helps.Let me knwith you feedback.
Regards,
Soumya

Drill Down From Combo -- Chart -- Chart

I Have a Combo box with Company and when I select Company it should display me the Pending count by ecah month in a chart..
Till now I achieved..But after that can I drill down further to see Pending Status,Size ,age!!
Please suggest!!
Thank you,

I arranged my chart.. I used the filter component and I am getting the policy count for each month according to distribution channel and Company!!
Channel---->Company>Jan-->Feb--->     Mar
     IMO-->     AIL>     100->     40--->     70
     IMO-->     AML-->     200->     500--->     80
The secound chart should display following
Channel-->     Company->     Case Size>     Jan->Feb>Mar
     IMO----->AIL->     0-10k>20-->30>30
     IMO-->AIL->     11k -50 k>     80--->10>70
     IMO----->AML-->     0-10k--->     50->100-->40
     IMO----->AML-->     11k -50 k>150->400->40
================================================
If I click Policy count of IMO,AIL in January which is 100 it should give following information in drill down
Casesize-->Jan
0-10k------> 20
11k-50K--->80
==============================
Please let me know How will I map it!!

Drill down through the chart

Similar Messages

Maybe you are looking for