Drill down via legend

Hi,
I created a line chart. Via navigate it's possible to drill down to a another report. Is it also possible to drill down via the legend icons?
Thanks, Robbert

hi,
For this u can add one custom graph for the legends and enable the drill down on that legend
please go through this thread
refer obiee Guru John's reply
Re: How to show only legend in graph?
thanks,
saichand

Similar Messages

Drill down via the legend icons

Hi,
I created a line chart. Via navigate it's possible to drill down to a another report. Is it also possible to drill down via the legend icons?
Thanks, Robbert

hi,
For this u can add one custom graph for the legends and enable the drill down on that legend
please go through this thread
refer obiee Guru John's reply
Re: How to show only legend in graph?
thanks,
saichand

Hiding a row based on the the drill down via table interfaces

I have a requirement to hide a particular row (key field) of a table if a characterisitic (0PLANT) is included in the table.
I have managed to hide the key field via the table interface but need to know how I would see if the characteristic is drilled down (IE included in the table).
Initially I used CAPTION_CELL to establish whether 0PLANT was in the report but when I then removed 0PLANT from the report, CAPTION_CELL is not reprocessed and thus the report is incorrect.
What is the best way to establish what characteristics are included in any report.
Any help would be appreciated.
Cheers
Shep.

Hi Neal,
why not using the service method get_state_infos.
In e_thx_axis_info you should find all relevant information
http://help.sap.com/saphelp_nw04/helpdata/en/32/ab3a3c24b4a00ae10000000a11402f/frameset.htm
Heike

Line Chart cannot drill down on legends and lines

I am doing a drill down Group report which will show the Sum of Last year's Sales By Country, State and city over a period of time(by date) for throughout the year 2007. Every group will have a line chart with Data title as Sum of Last year's Sales ($), Group Title as Date and legends displaying countries (or states or cities) as USA,UK,Australia. etc.. I have same sort of line chart for State and City as well. So, I got 3 levels of groups with a line-chart displayed in every group level.
Now, the problem is my drill down would not work on chart lines or legends as it would do for a 2-dimensional data chart like a bar-chart or pie-chart. In the Chart Expert->Data->Layout:Group ->in the On Change Of event selection I am able to specify either Sales.Country (or) Sales.country and Sales.Sales.State. Both options would not let me get the correct linechart with correct data and drill-down working as well.
The only work-around i got is to display the line chart with legends and showing the Country(or State or City) names in a field in the Group Footer. The drilling will work on those fields, but not on the legends or lines of the line chart. This make my report showing the Country names twice once on legend (with no drill-down) and once on group-footer(with drilling ability to groups below) which is untidy.
Have anyone tried to make a drill-down crystal report on a 3-dimensional data like this? The World Sales report in Crystal reports C:\Program...\BO\Samples\General Business\World Sales Report is the best example of how i would like to see my charts to drill down. However, they drill down across a 2-dimensional data. I am publishing this Crystal Reports in Business Objects Infoview.

Please re-post if this is still an issue

URL Parameterizing for BI Query Detail Drill Down via Xcelsius

Hi Guys,
I am In the process of building an Xcelsius dashboard using BI/BW as my source system, working on a "Details" URL button to allow the user to drill directly into the source BI queries with their current combo box selections.
I am trying to build a URL to pass a value to both a variable and to filter a characteristic. I want to pass a value to a 0fiscper variable and exclude an employee number.
I have been able to get each URL to work independently, but not working together. If I leave out either the variable part or the filter part it works, but it doesn't work with both the filter portion and characteristic filter section.
I followed other threads and used Web application designer (WAD) instructions to view the XHTML I will have to parametrize for my URL.
This is how I have flattened/parametrized it
Variable part:
BI_COMMAND_1-BI_COMMAND_TYPE=SET_VARIABLES_STATE&
BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE_TYPE=VARIABLE_INPUT_STRING&
BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE_TYPE-VARIABLE_INPUT_STRING=010/2010&
BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE=BCURFPER&
data provider part
BI_COMMAND_1-BI_COMMAND_TYPE=SET_SELECTION_STATE&
BI_COMMAND_1-TARGET_DATA_PROVIDER_REF_LIST-TARGET_DATA_PROVIDER_REF_1=DP_1&
characteristic filter part
BI_COMMAND_1-CHARACTERISTICS_SELECTIONS-CHARACTERISTIC_SELECTIONS_1-CHARACTERISTIC=0EMPLOYEE&
BI_COMMAND_1-CHARACTERISTICS_SELECTIONS-CHARACTERISTIC_SELECTIONS_1-SELECTIONS-SELECTION_1-SELECTION_INPUT_STRING=!201
So my complete URL is:
http://serverinfo?
QUERY=ABCQUERY&
BI_COMMAND_1-BI_COMMAND_TYPE=SET_VARIABLES_STATE&
BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE_TYPE=VARIABLE_INPUT_STRING&
BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE_TYPE-VARIABLE_INPUT_STRING=010/2010&
BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE=BCURFPER&
BI_COMMAND_1-BI_COMMAND_TYPE=SET_SELECTION_STATE&
BI_COMMAND_1-TARGET_DATA_PROVIDER_REF_LIST-TARGET_DATA_PROVIDER_REF_1=DP_1&
BI_COMMAND_1-CHARACTERISTICS_SELECTIONS-CHARACTERISTIC_SELECTIONS_1-CHARACTERISTIC=0EMPLOYEE&
BI_COMMAND_1-CHARACTERISTICS_SELECTIONS-CHARACTERISTIC_SELECTIONS_1-SELECTIONS-SELECTION_1-SELECTION_INPUT_STRING=!201
Then it gives me the following error when I attempt to run this...
" The metadata of "CMD" "SET_VARIABLES_STATE" are incorrect for parameter "CHARACTERISTICS_SELECTIONS"
If I set the debug=x flag to see what is generated in the error this is the info I get:
The parameter "CHARACTERISTICS_SELECTIONS" in the metadata of "CMD" "SET_VARIABLES_STATE is not correctly defined:
<parameterList>
<param name="BI_COMMAND_TYPE" value="SET_VARIABLES_STATE"/>
<param name="CHARACTERISTICS_SELECTIONS">
    <param name="CHARACTERISTIC_SELECTIONS" index="1">
      <param name="CHARACTERISTIC" value="0EMPLOYEE"/>
      <param name="SELECTIONS">
        <param name="SELECTION" modification_type="delete_if_value_not_equal" index="1">
          <param name="SELECTION_INPUT_STRING" value="!201"/>
        </param>
      </param>
    </param>
</param>
<param name="TARGET_DATA_PROVIDER_REF_LIST">
    <param name="TARGET_DATA_PROVIDER_REF" value="DP_1" index="1"/>
</param>
<param name="TARGET_VARIABLE_CONTAINER_REF" value="DEFAULT"/>
<param name="VARIABLE_VALUES">
    <param name="VARIABLE_VALUE" index="1">
      <param name="VARIABLE" value="BCURFPER"/>
      <param name="VARIABLE_TYPE" value="VARIABLE_INPUT_STRING" modification_type="delete_if_value_not_equal">
        <param name="VARIABLE_INPUT_STRING" value="010/2010"/>
      </param>
    </param>
</param>
</parameterList>
Thanks for looking!
-Gary

Hi Gary,
We came across the following issue.Colud you please provide the solution which you used to resolve it.
" The metadata of "CMD" "SET_ITEM_PARAMETERS" are incorrect for parameter "BUTTON_LIST".
Thanks,
Anji

IDA ALV - different behavior regarding "drill-down" for grouped attributes after upgrade to ERP 6.0 EHP7 SPS5

Hello Experts,
we have upgraded our Dev System to ERP 6.0 EHP 7 SPS5 (coming from SPS4).
We had implement an example with an IDA ALV. On SPS4 we could make a "drill-down" to the single lines of grouped attributes. Now with SPS5 this is not possible anymore if the grouping is done for more than one attribute.
On the following screenshot it scan be seen that the grouping is done over a Peril attribute and the Currency. I can only make a drill-down via the peril attribute, so that the aggregated values per currency are displayed. ON SPS4 it was possible to make a further drill-down for the currency attribute, so that the different single lines were visible which were part of the grouping/aggregation.
SPS5 behavior:
SPS4 behavior:
I did not found any new settings which steers the behavior. Also I did not found any note which gives a hint that this is a bug.
Does anyone know if the behavior for that was changed and why?
Thx & Best regards,
Florian

Hi Florian,
it is related with the currency field and it seems to be a bug. Please open a ticket to get the problem fixed. The component is BC-WD-CMP-ALV.
Cheers
Jens

Pie Chart legend text when drill down too larger

Dear Gurus,
I have this report with Pie chart:
*)Table:
Element Group
Earnings 100
Deductions 30
When drill down (after click on Earnings/Deductions), it become detail like this:
Element Group Classification Name
Earning Regular
Earning Irregular
And the Pie chart legend show this: Earnings, Regular Earnings
->how to remove Earnings?I just want to show classification name as legend.
I use OBIEE 11.1.1.3
Any help will be appreciated
Regards
Joe
Edited by: JoeSSI on Aug 10, 2012 12:33 AM
Edited by: JoeSSI on Aug 10, 2012 12:35 AM
Edited by: JoeSSI on Aug 10, 2012 3:24 AM

Hi Joe,
There was a bug associated with repeated legends in 11.1.1.3 version.Can you check the below document and see if the mentioned patch helps,
Vertical Bar Charts In OBIEE 11g Display Repeated Labels In The Graph Legend [ID 1376185.1]
Regards,
Dpka

Problem in accessing the drill down report via RRI

Hi guru's,
          ThanX in advance for all the stuff you are providing.
I have a problem with the drill down report.I have two reports Q1 and Q2 where Iam navigating to Q2 from Q1 via RRI.But when I try to drill down to the Report Q2 It gets into an unending state of query execution(to say shortly it gets struck).
This report was working fine earlier.But very Recently I encountered this problem.I started debugging the query at RSRT.For the report Q1 just goes fine but when I drill down to Q2 it gets struck.This is the part of code where the report end up in an unending state.Infact it gets struck exactly while calling the method...
"CALL METHOD g_sx_buffer-r_request->read_data"
Fetch the data, using the wait command only with the second parse
    IF g_s_session_prptys-use_wait = rs_c_false
      OR i_mode = rrx1_c_grid_get_mode-wait_fetch.
Is data available
CALL METHOD g_sx_buffer-r_request->read_data
        EXCEPTIONS
          x_message     = 8
          no_processing = 1.
      CASE sy-subrc.
        WHEN 1.
    Necessary for drill to level
     raise no_processing.
        WHEN 8.
          RAISE x_message.
Can Some one help me out to know what happens at this part of code that is causing the error.
ThanX A Lot,
Regards,
Sukumar

Its better you raise an OSS message on this problem.

Drill down report...

HI abapers,
How to create drill down report in alv.
When i double click the particular field, another report has to pop up and display the details of that particular field.
for eg,
When double click the amount spent field other report has to say, For which material the amonut has spend.
Thanking You
arvind

hi arv,
for me your scenario is not clear..
you want to drill down the alv .. and show the report in the same program or you want to call another program when u try to hit the alv report..
well for drilling down the same program.. you can use the following method
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
    I_INTERFACE_CHECK                 = ' '
    I_BYPASSING_BUFFER                = ' '
    I_BUFFER_ACTIVE                   = ' '
     I_CALLBACK_PROGRAM                 = GV_REPID
    I_CALLBACK_PF_STATUS_SET          = ' '
     I_CALLBACK_USER_COMMAND            = 'TOP1'     " drill down
     I_CALLBACK_TOP_OF_PAGE             = 'TOP2'
    I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
FORM TOP1 USING UCOMM TYPE SY-UCOMM SELFIELD TYPE SLIS_SELFIELD.
READ TABLE GT_FINAL_TOTAL INTO GS_FINAL INDEX SELFIELD-TABINDEX.
CASE SELFIELD-TABINDEX.
WHEN SELFIELD-TABINDEX.
perfrom itab2_operation. " in this form you will write the code to get the data for drill dispplay
now defing fieldcatalog again : example :
    GS_FCAT-COL_POS = 1.
    GS_FCAT-FIELDNAME = 'EBELN'.
    GS_FCAT-SELTEXT_L = TEXT-001.
    GS_FCAT-FIX_COLUMN = 'X'.
    GS_FCAT-OUTPUTLEN = 13.
    APPEND GS_FCAT TO GT_FCA
and call alv display again :
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
     EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
    I_CALLBACK_PROGRAM                = GV_REPID
I_CALLBACK_PF_STATUS_SET          = ' '
    I_CALLBACK_TOP_OF_PAGE            = 'TOP2'
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
I_GRID_TITLE                      = ''
I_GRID_SETTINGS                   =
    IS_LAYOUT                         = GS_LAYOUT
      IT_FIELDCAT                     = GT_FCAT
and if you want to call another progam when u hit..u have to use..submit key work
like SUBMIT ZAFI013R VIA SELECTION-SCREEN AND RETURN.

Feature Request: Make RECENTS better with two more drill down options

Hi everyone!
I love my iPhone but - as with everything - one can make things get even better... Not sure where to post so I try here. Would love to hear if you feel the same need:
I realize that RECENTS within the phone application could be improved quite a bit by adding two simple buttons at the top.
Right now there is "ALL" and "MISSED"... being able to drill down the MISSED calls is great, but many times I would like to be able to drill down:
* outgoing calls (aka those placed by me via iPhone)
* incoming calls (aka those that I received on my iPhone)
Would love to hear what others think about that. If we there will be many replies chances are good that Apple will fix this with a software update. It should be very little work on Apple's side.
Greetings!

I agree this feature would be most useful: most other phones incorporate it, and it would probably not be too difficult to add it to the iPhone? I expect most will agree with you, but this type of feedback should be sent directly to Apple:
http://www.apple.com/feedback/iphone.html

HGrid with drill down & chart

Hello folks, I've a requirement, kinda hard and I would like to know some guide lines with my first OAF customzied page.
The requirement is a page that includes the Organization Hierarchy from the top most to the to bottom including managers and with a drill down option for each department and manager. Another thing is a report issue, which is a competency/appraisal chart grouped for a specific department/supervisor or the whole organization.
At first, I thought of a graphTable bean under the HGrid that will be implemented with PPR option to refresh each time a selection happens in the HGrid. Then I've found a way to include BI Publisher reports withing an OAF Page in real-time. I almost have gathered the information to be used but the main problem is, I don't know from where to start!.
Please advise.

glad to hear we were on the right track. chapter 12 of the htmldb documentation provides info on some of the api's that htmldb makes available to you for use in your application. of those api's, htmldb_util, has a url_encode function. it encodes special characters and such into hex so you can call them via a url. because of the weirdness you described it seemed as if you could use some encoding your svg chart links, too. so instead of coding your select statement as...
select 'f?p='|| :APP_ID ||':2:'|| :APP_SESSION ||'::::P600_SHOW:'||remarks link, remarks label , count(remarks) value from whatever
...i was suggesting you write it as...
select 'f?p='|| :APP_ID ||':2:'|| :APP_SESSION ||'::::P600_SHOW:'||htmldb_util.url_encode(remarks) link, remarks label , count(remarks) value from whatever
...hope this helps,
raj

REPORT PAINTER DRILL DOWN REPORT

Hi,
i need to develop report painter report with drill down for cost elments and month wise
out should be cost elements and all months
Please suggest how to use drill down
Thanks and Regards
RAVi

Along these same lines. I have a user that cannot drill down into a drill down report. Let me clarify. This report does have drill down capability as some people can drill down into it but others cannot. If a user has authorization to run a report via GRR3. When they click on an item to drill down they do not get an authorization error statement, all they get is a statment that says "list contains no data". Any ideas why some can drill down and some can't? Thanks
Mark

Line chart will not drill down

I am doing a drill down Group report which will show the Sum of Last year's Sales By Country, State and city over a period of time(by date) for throughout the year 2007. Every group will have a line chart with Data title as Sum of Last year's Sales ($), Group Title as Date and legends displaying countries (or states or cities) as USA,UK,Australia. etc.. I have same sort of line chart for State and City as well.
Now, the problem is my drill down would not work on chart lines or legends as it would do for a 2-dimensional data chart like a bar-chart or pie-chart. The reason is in the Chart Expert->Data->Layout:Group ->in the On Change Of event selection I am able to specify either Sales.Country (or) Sales.country and Sales.Sales.State. Both options would not let me get the correct linechart with correct data and drill-down working as well.
The only work-around i got is to display the line chart with legends and and showing the Country(or State or City) names in a field in the Group Footer. The drilling will work on those fields, but not on the legends or lines of the line chart. This make my report showing the Country names twice once on legend (with no drill-down) and once on group-footer(with drilling ability to groups below) which is untidy.
Have anyone tried to make a drill-down crystal report on a 3-dimensional data like this? The World Sales report in Crystal reports Samples\General Business\World Sales Report is the best example of how i would like to see my charts to drill down. However, they drill down across a 2-dimensional data. I am publishing this Crystal Reports in Business Objects Infoview.

Wow. That post almost made my eyes bleed. You may want to add some white space for readability.
Anyways - as Falk said. You should move or re-post this in the [Crystal Reports Design|SAP Crystal Reports; forum. They specialize in this sort of thing. Us dev guys here make sure we can see the chart without errors and don't do much beyond that.

Bubble Chart drill down issues

I have a filter and a bubble chat with 7 series. The chart is showing up bubbles with different size and colors as per the settings when I chnage the filter
The problem is with drill down
I want to drill down to a Bar chart when I click on bubbles. Each bubble click will drill down data into that bar charchart as a pop up. I know how to do it as I have done it in the past with other components.
But when I use drill down with bubble chart, I have to assign separate destination area for each series which makes it difficult to drill down into a chart. What i want is the bubbles to drill down data into a single row so that I can map the Y-axis of chart component to that row and X axis as fixed labels. But I am not able to do that. Moreover once inserted there is no way to clear the destination cells.
However if I use data in range options in bubble chart then I can use drill down as I get only one series in that case. But that method also has limitations.
1. I am not able to display series name on the bubbles. It doesn't make any sense to show bubbles without any labels.
2. All bubbles are of same color.
Is it possible to overcome above two limitations when using data in range option?
Thanks

Hi Tarun,
as a workaround you could define a special area as mapping area for the X-Y-chart.
This area is filled via excel formulas from the bubble chart drill down destinations. You can concatenate the values from the drill down target areas, like "=A4&A5" etc. Make sure to clear all cells except the actual drill down target cells.
Hope this helps,
best regards
Heiko

Drill Down Report using Crystal reports in eclipse and jspviewer

Hi
I want to understand how to write a drill down report since I have a requirement for my project, so I tried to run the sample drill down.rpt that is available with Crystal Reports 2008 Complete Reference book by George Peck.
I can see the results correctly( i.e. can drill down) in the preview tab . Since I am working inside the eclipse, the way I run the reports is first "Create report viewer JSP" by right clicking the report and have a url mapping to this jsp. I am running the reports from a hyperlink that maps to the url which will launch the jsp.
the jsp is:-
<%@ page contentType="text/html; charset=UTF-8" pageEncoding="ISO-8859-1" %><%@ taglib uri="/crystal-tags-reportviewer.tld" prefix="crviewer" %><crviewer:viewer reportSourceType="reportingComponent" viewerName="Drill Down-viewer" reportSourceVar="Drill Down" isOwnPage="true" allowDrillDown="true">
     <crviewer:report reportName="reports/Drill Down.rpt" />
</crviewer:viewer>
The one that was created by "Create report viewer JSP" did not had "allowDrillDown" attribute at all .But I added it since it isnt working.
So when I launch my web app and click on the link to run the report, I get the report results but only to the summary level. When I double click the summary level I get a 404 error page.
Can please anyone suggest what is going on.
Thanks
poonam

Ok. So, you added the report to the project. Now we have to add the CR assemblies to the project, add the viewer (if need be) and fire it off. Simplest code would be:
Public Sub New()
        ' This call is required by the designer.
        InitializeComponent()
        ' Add any initialization after the InitializeComponent() call.
        CrystalReportViewer1.ReportSource = ("path to report")
    End Sub
In this case you are using the viewer SDK to runt he report. The report will prompt for any logon parameters - but you can code these also. You can load the report via the engine as bellow. Again, the report will prompt. I prefer to use the engine as it is way more "extensible"...
Public Sub New()
        ' This call is required by the designer.
        InitializeComponent()
        ' Add any initialization after the InitializeComponent() call.
        Dim crReportDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument()
        crReportDocument.Load("path to report")
        'Bind the report to the viewer
        CrystalReportViewer1.ReportSource = crReportDocument
    End Sub
If you have a report added to the project (strongly typed) the code would be:
CrystalReportViewer1.ReportSource = New myReport()
For more details, I'd recommend looking at the sample app vbnet_win_simplepreviewreport.zip available from the following location:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
The developer help files are here:
[SAP Crystal Reports .NET SDK Developer Guide|http://help.sap.com/businessobject/product_guides/sapCRVS2010/en/crnet_dg_2010_en.zip]
[SAP Crystal Reports .NET API Guide|http://help.sap.com/businessobject/product_guides/sapCRVS2010/en/crnet_api_2010_en.zip]
- Ludek

Drill down via legend

Similar Messages

Maybe you are looking for