Drill filters should be visible on reports with View on Demand access
Hi All
Environment - BO XI 3.2, SP 2, FP 3.6
Source - BI 7
I have requirement for the end users , that they should only able to access the reports and refresh them. I have achieved this, but with these access users are not able to view the drill filter applied in the reports. Could you please help that where am I lacking or which other access I need to provide so that user should be able to have refresh on demand + drill filters access in report.
Thanks in advance.
Have you given the right ""Work in Drill Mode" on apllication level for hte perticuler user.
Similar Messages
-
Drill down of manual cross tab reports with Multi variable subreports
I tried to make a subreport by setting the hyperlink on the group sum of a manual crosstab (http://www.tek-tips.com/faqs.cfm?fid=1219) by setting Hyperlink to another report object.
The documentation said I should copy and paste the name of the report object in the sub report over into the field in the primary report. As I don' t really know what a report object is this failed. Further I found some code in a sample report to deal with subreports that have multiple parameters. The code was unbelievable; it couldn't be right. So, how do I link my subreports to my reports by passing two parameters to the subreports that represent the row and column label of a given sum.
Further what are the fields in the hyperlink another report object from for:
Select from: //do they want a query here?
Report title: //The don't let you type in this
Object Name: //This seems elective
Data Context:// No clue on this either
Thanks for any help you can provide
p.s. This forum doesn't seem to use traditional bit codeThanks for the reply. I looked through those samples and other samples. The two cross tab samples I could find were CtossTab and Inventory CrossTab. Neither has a hyperlink to a sub report and I believe those were actual cross tabs, not manual crosstabs. When I scoured the web for an answer, all I could find was what was linked. This is going 20 pages deep on google.
Crystal crosstabs are 98% better than the excel power pivot or pivot table. However, with Excel, you can drill down to the details automatically. With crosstabs you can't. I was hoping to replicate this by making each summary in the manual cross tab a hyperlink to a sub report that filters the details based on the row and column just as excel does. There is no sample for this.
Oh yes, I'm using CR XI -
How open a report with Viewer 2008 without using Visual Studio and Java
Hi,
There is a way to open a report (with parameters) save in a web server with Crystal Report Viewer 2008 without using Visual Studio or Java ?
I've an asp page and i want to open this report using some command (I know asp, vbscript and html)
In the past it was very easy because we use CR 9, but now it's already many days im looking for a solution but seem impossible.
I know the craxdrt.dll is not included with Crystal Reports 2008.
It seem me i can use OpenDocument, but i'm not sure. Someone has some easy example to help me ?
Remember i have only Crystal report viewer 2008 on the server and on the clients.
Thanks in advanceIf you are looking to create a web application or view report through a web server using only Crystal Reports then you do have to either use Java, or .NET.
If you have Crystal Reports server or Business Objects Enterprise you can use OpenDocument to view managed reports but this does require one of our server products.
Trevor. -
Post Author: srinath
CA Forum: Publishing
In BO XI, I am facing problems with drill filters. I have a report with eight tabs and each tab has data corresponding to a particular value in the drill filter. A particular value is selected from the drill filter and the corresponding data is displayed in each tab. I need to select a value from the drill filter and display the corresponding data in the tab; while doing so when i save the report and open it again, the data corresponding to the particular filter value is not present instead it displays all the data. The only other way i could solve this problem was by creating a report level filter in each tab but this doesnt seem to work in other reports. What is the proper way of using the drill filter in this case?How did you configure the filter?
-
Converting a Crystal Report with Many Sub-Reports into CF Report Builder
I am trying to rewrite a Crystal Reports report which has 11
subreports in CF Report Builder. In the CR report, each subreport
has it's own report footer seciton. I have not been able to find
anything in CF Report Builder that allows me to do the same. Is CF
Report Builder capable of producing a report with multiple
subreports?Having successfully created a report with 5 or 6 subreports
(with each sub-report containing a multiple sub-sub reports) I can
say with confidence, "Yes you can." However the real question you
should ask is, "
Should I create a report with multiple sub-reports in CF
ReportBuilder?" And the answer to that is.... NO, WHAT ARE YOU
CRAZY!
If you have something that works in Crystal Reports I would
suggest you stick with that. Otherwise you're setting yourself up
for a lot of headaches. Now maybe it was because I started using
the report builder that came with MX7, but it seems there are still
quite of few bugs that will leave you shaking your fist at your
computer. If however you do continue and do the CF Report Builder
route, be prepared for your application to crash unexpectedly, and
for many things to not work they way you expect them to. And if you
ever need help good luck. Take the fact that you had difficulty
finding good documentation as a sign of how little Adobe supports
this product.
CF Report Builder is fine for very simple reports, but don't
get fancy with it, you'll only regret your decision in the
end. -
hi forum
I need your help and I hope you can help me. In my job I need to do a Report, but the function that containts the cursor returns a ref cursor and this ref cursor doesn't return a special format 'cause the cursor that I use is Dynamic so when I try to do the report it is not generated.
the documentation says that should return something for example
type vref_cursor is ref cursor[b] return record;
or
type vref_cursor is ref cursor return depto%rowtype;
but if I use this in a dynamic cursor it generates an Error and don't accpet this declaration only the following
type vref_cursor is ref cursor;
Do you Know how should I do the report with a dynamic cursor ?
best regards
thank's a lotThat is not possible. From the online help:
Each ref cursor query is associated with a PL/SQL function that returns a strongly typed ref cursor. -
Crystal Reports Server XI On-demand Subreport does not open
Hi,
I'm using Crystal Reports XI and have a report with two on-demand subreports. In Crystal Designer, both work fine - that is when I click on either on-demand subreport in preview, it opens in another tab.
But in Crystal Reports Server, one subreport works but the other one just opens another tab with the main report. What could be the problem?
Thanks,
Rob
Edited by: Rob Hershfield on Feb 2, 2010 4:36 AMI solved it - Both subreports have no name but the one that wasn't working apparently needed a name so I just typed "." (a period) and now it works.
-Rob -
Error Crystal report When viewed through SAP B1
Dear Experts
SAP B1 8.8 PL 16,SQL 2008
I am facing error (Unable to retrive data from database)(Vendor code-156) while accessing Crystal report from client machine throgh SAP B1.I have imported Crystal report through manage layout.The crystal reported is in shared in SAP server B1 SHR folder.I am able to access data from crystal report when viewed otherwise.When accessed crsytal report through SAP b1 on SAP Server crystal report is working fine.
Thanks & Regrds
Saurabh LambaHi Saurabh Lamba,
Go To Administration / System Initialisation / Authorisation / General Authorisation & Set Authorisation for user.
If you have to Set Authorisation for user allready then follow this steps.
1.Restore Database as Test Company.
2.Export Report From Live Company.
3.Import this Report in Test Company as different name.
4.Export Report from Test Company have you Imported as deifferent name.
5.Again Import this Report in Live company as different name
I don't know what's the logic behind it.
Thanks,
Srujal Patel -
Error on running reports with filters/security
Post Author: mishel
CA Forum: Publishing
Hi, I am trying to run a report with filters/security defined via Business View. When I run the report as administrator, I am able to view successfully. However, when I login as test/dummy account which filters my parameters, I am getting such error - "A request was cancelled. The necessary security privileges could not be verified. This indicates a problem with the security server." Appreciate all the help I can get.Thank you,MichelleHi onizga,
According to your description that you are migrating SSRS 2008 R2 reports to SSRS 2012 SP2, after migration you got some error like “The Uri string is too long” which only occurred when accessing the drill-through actions, right?
Usually, the issue can be caused when you try to pass some parameters that cause the URL length to exceed 65,520 characters for a Microsoft SQL Server 2012 Reporting Services (SSRS 2012), you cannot render the report, and you may receive the following error
message:
The value of parameter 'param' is not valid. (rsInvalidParameter).Invalid URI: The Uri string is too long.
This is an known issue and already have the hotfix SQL Server 2012 Service Pack1 Cumulative Update 9 (CU9) as you know, you can try to reinstall this hotfix to fixed this issue:
http://support.microsoft.com/kb/2916827 .Any issue after applying the update, please post it on the following thread or you can submit an feedback:
http://connect.microsoft.com/SQLServer/feedback/details/788964/ssrs-2012-invalid-uri-the-uri-string-is-too-long
Similar threads for your reference:
SSRS - The value of parameter 'param' is
not valid. ---> System.UriFormatException: Invalid URI: The Uri string is too long.
Microsoft.ReportingServices.Diagnostics.Utilities.InvalidParameterException:
The value of parameter 'pSetOfScopes' is not valid. ---> System.UriFormatException: Invalid URI: The Uri string is too long
If you still have any question, please feel free to ask
Regards
Vicky Liu
If you have any feedback on our support, please click here -
Drill through to another report with bins in OBIEE 11g
Hi Everyone,
We have a specific scenario that is as follows:
Bar chart with 3 bars: '0-30', '31-60' and 'other'
these bars repsent the number of people who are in that age bucket.
This was accomplished by taking the peron's Age (a dimension with an age column) and using the 'bin' option in obiee 11g answers.
When the user clicks on one of the bins in the bar chart (e.g. 0-30), it should navigate to another report which contains details (a table) of ONLY the people who are in that age bucket.
In order do this I created the same 'age bucket' in the drilll through report and set the field as prompted.
This works in OBIEE 10g but in OBIEE 11g when I click the 'bin' (e.g. 0-30) on the top report, it navigates to the other report via action link and displays ALL of the people, not just the people in the bucket 0-30.
Can anyone advise?
P.s. if I remove the bin for the age bucket, and display the actual age, the drill down works fine. I think the issue is specific to the bin feature. I am using OBIEE 11.1.1.6.4Just confirmed with Oracle this is bug 13996544 . FYI just incase it helps anyone
-
Drill down to a report with a select view
I have a report with a select view on a column... In this column I have coded a navigation to another report that has some details and also has a select view on the same column.
a) The only way to make this work is in the construction, using the view edit screen, the select view, select the option, save it... and then in the criteria, code the navigation.
This had to be done to every option.
b) Since the target report has also a select, whenever you navigate from the original report, the detail report is displayed "as it were", in respect to the select column... The target report is filtered by this column (I am using "is prompted") It would be nice if besides the filtering the select could show the select that comes from the original report... It is not working like this... The user has to select again (column selector) to see it like the original one...
Sorry, it is a bit confusing...but I´d appreciate any help.
Txs.AntonioI dont think about drill down, but try with navigation using common columns. in this way we can have both side navigations summary-> detail and detail->summary.
-
Need SAP BW AR Aging Report with R/3 Aging Report Should Match
Hello All,
Could you please let me know SAP Delivered AR Aging Report on BW Side should match with SAP R/3 AR Aging Report for a given Customer.
When I ran the report on BW Side I am able to match the report values with InfoProvider Values and also with RSA3 Extractor (0FI_AR_4).
But when i tried to compare BW report with ECC Report values are not Matching at a given Customer Number.
Please explain the best practice to match the values of BW Standard Aging report with ECC standard AR aging report.
Thanks,
GeethaHi,
I am actually running the SAP Delivered Report in BW.
So I didn't changed any thing in report.
I m running the report in ECC using s_alr_87016128 tcode.
Still I m getting the amount difference.
I have checked at customer level with company code and Key date.
Can i get inputs on these.
ECC Report s_alr_87012168
BW Report:0FIAR_C03_Q0005
Thanks,
Geetha -
ALV Reporting with drill down capabillities
I'm creating a abap custom report using the ALV. I want to drill down to CJ03 which is projects. I know how to do it in regular custom reporting, but I don't seem to be able to get it to work using the ALV. Can anyone help?
Thanks.
LindaHi Linda,
Take a look at this sample program. The logic to handle any interaction with the user is in my "PORCESS_USER_COMMANDS" routine.
This is defined in the "I_CALLBACK_USER_COMMAND" parameter in the ALV FM.
Hope this helps.
Cheers,
Pat.
[code]
Modification History
Date | Author | Chg Req # | Description
15.08.2001| Pat Yee | $TMP | Program Creation
This program is an example of how the ALV Display works.
It will display Customer Data.
This report will also show how to display an ALV report with different
colored lines and icons
REPORT zpat.
Include Programs
INCLUDE <icon>.
Database Tables
TABLES: kna1. "Customer Master
Types
TYPE-POOLS: kkblo.
Structures
Structure to hold the Color Information
DATA: BEGIN OF st_color,
color(3) TYPE c,
END OF st_color.
Structure to hold the Icon Information
DATA: BEGIN OF st_icon,
icon(4) TYPE c,
END OF st_icon.
ALV Field Catalog Structure
DATA: st_fieldcat TYPE slis_fieldcat_alv.
ALV Layout Structure
DATA: st_layout TYPE slis_layout_alv.
Internal Tables
Output Table
DATA: BEGIN OF tbl_kna1 OCCURS 0.
INCLUDE STRUCTURE st_icon. "Icon Structure
INCLUDE STRUCTURE kna1. "Customer Master Structure
INCLUDE STRUCTURE st_color. "Color Structure
DATA: END OF tbl_kna1.
ALV Field Catalog Table
DATA: tbl_fieldcat TYPE slis_t_fieldcat_alv.
Variables
DATA: fieldname(30) TYPE c,
g_repid LIKE sy-repid.
Start of Selection
START-OF-SELECTION.
g_repid = sy-repid.
PERFORM get_data.
End of Selection
END-OF-SELECTION.
PERFORM do_fancy_stuff.
PERFORM get_layout.
PERFORM get_fieldcat.
PERFORM create_report.
*& Form CREATE_REPORT
Learn to read the subroutine name!
FORM create_report.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_interface_check = ' '
i_callback_program = g_repid
i_callback_user_command = 'PROCESS_USER_COMMANDS'
it_fieldcat = tbl_fieldcat
i_default = 'X'
i_save = ' '
is_layout = st_layout
TABLES
t_outtab = tbl_kna1
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " CREATE_REPORT
*& Form GET_FIELDCAT
Build the Field Catalog
FORM get_fieldcat.
Here the field catalog is created. To display more fields simply
'uncomment' the additional lines and add the field name. Also note
that the field catalog is much more powerful than this. You can
intensify fields, change the colour, assign reference fields, etc.
Look at type slis_fieldcat_alv for more options.
PERFORM write_fieldcat USING 'ICON' 'TBL_KNA1' ' ' 'X' 1 '2' 'X'
PERFORM write_fieldcat USING 'KUNNR' 'TBL_KNA1' 'KNA1' 'X' 2 ' ' ' '
PERFORM write_fieldcat USING 'NAME1' 'TBL_KNA1' 'KNA1' ' ' 3 '10' ' '
'X'.
PERFORM write_fieldcat USING 'STRAS' 'TBL_KNA1' 'KNA1' ' ' 4 ' ' ' '
PERFORM write_fieldcat USING 'TELF1' 'TBL_KNA1' 'KNA1' ' ' 5 ' ' ' '
PERFORM write_fieldcat USING 'ORT01' 'TBL_KNA1' 'KNA1' ' ' 6 ' ' ' '
PERFORM write_fieldcat USING 'PSTLZ' 'TBL_KNA1' 'KNA1' ' ' 7 ' ' ' '
PERFORM write_fieldcat USING 'SORTL' 'TBL_KNA1' 'KNA1' ' ' 8 ' ' ' '
PERFORM write_fieldcat USING 'ERNAM' 'TBL_KNA1' 'KNA1' ' ' 9 ' ' ' '
PERFORM write_fieldcat USING 'SPRAS' 'TBL_KNA1' 'KNA1' ' ' 10 ' ' ' '
perform write_fieldcat using ' ' 'TBL_KNA1' 'KNA1' ' ' 10 ' '.
perform write_fieldcat using ' ' 'TBL_KNA1' 'KNA1' ' ' 11 ' '.
perform write_fieldcat using ' ' 'TBL_KNA1' 'KNA1' ' ' 12 ' '.
ENDFORM. " GET_FIELDCAT
*& Form WRITE_FIELDCAT
Write the Field Catalog data to the Field Catalog Table
-->name Field name
-->tab Table name
-->st Structure Name
-->key Is this field a Key?
-->pos Position Number
-->length Field Length
-->icon Display as Icon
-->hot Hotspot
FORM write_fieldcat USING name tab st key pos length icon hot.
st_fieldcat-fieldname = name.
st_fieldcat-tabname = tab.
st_fieldcat-ref_tabname = st.
st_fieldcat-key = key.
st_fieldcat-col_pos = pos.
st_fieldcat-outputlen = length.
st_fieldcat-icon = icon.
st_fieldcat-hotspot = hot.
APPEND st_fieldcat TO tbl_fieldcat.
CLEAR st_fieldcat.
ENDFORM. " WRITE_FIELDCAT
*& Form PROCESS_USER_COMMANDS
Interactive Reporting Commands
FORM process_user_commands USING syst-ucomm LIKE syst-ucomm
selfield TYPE slis_selfield.
This subroutine is called when there is user interaction in the output
In this case if the user double clicks the Customer Number then the
program will call transaction XD03 and display the Customer Master
Data
CASE syst-ucomm.
WHEN '&IC1'.
get cursor field fieldname.
READ TABLE tbl_kna1 INDEX selfield-tabindex.
SET PARAMETER ID 'KUN' FIELD tbl_kna1-kunnr.
CALL TRANSACTION 'XD03' AND SKIP FIRST SCREEN.
ENDCASE.
ENDFORM. " PROCESS_USER_COMMANDS
*& Form GET_LAYOUT
set the layout of the ALV.
add color to the row?
FORM get_layout.
st_layout-info_fieldname = 'COLOR'.
st_layout-colwidth_optimize = 'X'.
st_layout-get_selinfos = 'X'.
ENDFORM. " GET_LAYOUT
*& Form get_data
Get some data to play with
FORM get_data.
SELECT * FROM kna1 INTO CORRESPONDING FIELDS OF TABLE tbl_kna1
UP TO 30 ROWS.
ENDFORM. " get_data
*& Form do_fancy_stuff
Do some fancy pants stuff for example changing the color of
lines and adding icons
FORM do_fancy_stuff.
Here we will demonstrate changing the color of ALV Record lines as
well as displaying Icons
LOOP AT tbl_kna1.
All records where NAME1 begins with 'M', will be displayed in Bluish
Green
IF tbl_kna1-name1(1) EQ 'M'.
tbl_kna1-color = 'C41'. "Bluish Green
MODIFY tbl_kna1 TRANSPORTING color.
ENDIF.
All records with no TELF1 will be displayed in White and have a
Warning Icon
IF tbl_kna1-telf1 IS INITIAL.
tbl_kna1-color = 'C00'. "White
tbl_kna1-icon = '@AH@'. "Warning Icon
MODIFY tbl_kna1 TRANSPORTING icon color.
ENDIF.
ENDLOOP.
ENDFORM. " do_fancy_stuff[/code] -
Link to summary report with filtered data set within FormsCentral
Is it possible to generate a link to a summary report with a filtered data set within FormsCentral?
If I have 4 sales agents each using the form to submit their repsective sales (with a dropdown indicating the sales agent) is it possible to filter the data so that only Sales Agent A see a report of their sales?
Thanks,
DTry following forum:
http://forums.adobe.com/community/formscentral?view=discussions -
Create report with filtered teststeps
Hello,
i am using TS3.5 and want to create a report with only selected teststeps included.
For this i created in my custom teststeos a container called "Config" and inside this container a
bool-parameter called "ShowIt".
Then i opended Teststand -> Configure -> Report-Options and set
"Result Filtering Expression" to "Config.AddIt == True"
When i run then the sequence i get a popup after finishing which says:
ActiveX Error
sCode = 0xffffbc66
Description: Unknown variable or property name "Config"
Error accessing item "Config".
But when i copy the parameter "AddIt" into Result.AddIt and change the
"Result Filtering Expression" to "Result.AddIt == True" then it works!
Why cant i use a custom container for this filtering?
The standard-teststand models stops then with Error in the TestReportCallback at teststep "Get Report Body (DLL)"
Thanks for your help.Yes, this is enabled.
I attached the testsequence and a screenshot of the report-options.
In the sequence i copied the default "passfail-Test" and added there a container "Config" with a bool-variable "AddIt"
This new steptyp is then called twice in the mainsequence where the first call is AddIt == False and trhe second call AddIt ==True.
Then i changed the report-options as you can see in the attached screenshot.
But then i get the error-message.
What am i doing wrong here?
Attachments:
dummytest.vi 11 KB
report.seq 29 KB
ReportOptions.jpg 61 KB
Maybe you are looking for
-
After move, all-in-one will not print or connect
My All-In-One was working fine before we moved. Now, it says it isn't connected to the computer. I have tried connecting via ethernet and USB as well as wirelessly. I have downloaded the HP doctor, new drivers, and I am at my wits end. Really need
-
Impossible d'ouvrir photoshop après avoir telechargé la version d'essai
Bonjour, depuis le mois de juin je telecharge, desinstalle régulièrement photoshop. a chaque fois impossible d'ouvrir en raison "d'une erreur de programme" j'ai Mac Os 10.9.4. merci de votre aide
-
Display predicted time of completion
Hey I was hoping someone would have an answer for this. It's not really a critical part of the program but it would be nice to have sooooo... I'm able to calculate an estimate of the amount of time my program will take to run. Is there any way to th
-
Howto install/run MI 7.0 within WM6.1
Hello I am a newbie to SAP and normally doing support for a device manufacturer. I had to support the install of MI 7.0 last friday and found a very irritating failure. I then started a test scenario with Mobile Device Emulator and a Mobile 6.1 Prof.
-
How does Time Machine works?
Hey, I'm a new mac user and started to use time machine. There are some questions I don't understand. For the size of the external drive, what size do I need if my internal drive on my macbook pro is 500GB? I only used 100GB. And does the external dr