Drill issue

Hi everyone,
In a Heirarchy there are four object 1,2,3,4
in one of my report i need all the object in the same manner, however in other report i need the object 1,2,3 but not 4 and there should be no sign of drill down to 4 , there should only be sign of drill up on object 3, is it possible with the same Heirarchy or i need to create another one
I'am using BO XI 3.1 SP1 Win XP

1) Deny your users the right to Extend scope of analysis (THis is an application specific right for the Web Intelliggence application object)
2) Add to the query editor in report A all 4 objects your hierarchy constists of.
3) Add to the query editor in report B only 3 objects from your hierarchy.
In Report A your users can drill along the entire hierarchy path. In Report B they can drill only along the 3 objects.
Regards,
Stratos

Similar Messages

BW Hierarchy drill issues

Hi all,
I'm having issues in webi when drill down to the lowest level of a hierarchy and that level contains no data. The symptom is that I get an empty table with no hierarchy label and no way to drill back up to the previous level. The report has to be closed in order to go back to the higher levels. There are no errors evident in any logs. If I run the mdx from the mdx logs in mdxtest I get no data returned. I found a forum post on BOB that suggests applying the following SAP notes
1402674 - MDX: Descendants delivers incorrect results for NON EMPTY
1404328 - MDX: bXML flattening and PROPERTIES: Columns overwritten
Both have been applied but the issue remains. Has anyone seen this before?
Business Objects Edge XI 3.1 SP2 on linux.
Integration Kit SP2
Thanks
Keith

Hi Keith,
We are facing the same problem!
Did you find any solution for it yet?
If so, can you please share it?
Kind regards,
Giovanni.

Drill Issue on Webi XIR2

Hi all,
I am creating a report on WEBI XIR2 which contains drill option. The report has multiple data providers and merged dimension.
Because of merged dimensions, I am getting the drill values from all the data providers from which I have merged the dimension. I want the drill to return only those values for which the report has data, and not all.
Please let me know, if you have any suggestion/workaround in this regard. Appreciating your help in advance
Thanks and Regards,
Nisha

d

11g presentation hierarchy - limit of levels?

Do you know of a limit on presentation hierarchy levels that can be displayed in OBIEE 11g analytics?
I faced an drill issue in my project and was able to reproduced it with OBIEE Samples Virtual Box image.
In particular case it's not possible to browse lower levels of hierarchy: [https://picasaweb.google.com/mudlaff.piotr/February132012]

Ok, that's too bad. No way to format individual items, we're talking about thousands of accounts in an account hierarchy. I'll put in an enhancement request for this feature. I guess one related question, is there any way in answers to add a column that returns what level of a hierarchy the given row is at? If I could do that, then I could format the measures conditionally based on that column?
Thanks,
Scott

Universe on MSAS 2005 Cubes

Hi,
I created a universe based on MSAS 2005 cubes. then i tried to create a webi report, it is throwing an error, where as i can create a report in rich client but unable to perform drill operations in rich client.
I am using the Bo XI 3.1 Sp3.
I created a universe using the designer.
the error message in webi is :
A database error occured. The database error text is: An error occurred while trying to load the provider for transport odbo. Failed to load library . System error message: The specified module could not be found.. (WIS 10901)
can we create a universe based on MSAS cubes using the designer?
can any one please help me how to solve this issue?
Thanks
Krishna

HI deepu,
My admin installed MSAS 2005 in BOE and now i am able to create/run webi reports. now i got drill issue in webi and rich client.
i can able to drill down but when i click on drill up, it is throwing an error, then onwards, i am unable to perform any drill oparations , each time i click drill up\down, it is throwing error.
the error message is :
An internal error occured while calling 'executeDrillAction' API. (Error: ERR_WIS_30270)
Could you please help me solve this issue.
we are using BO XI 3.1 SP3.
Thanks
Krishna

Bex report issue - no applicable data found when we drill down on free char

Hi All,
We are facing some strange issue with one of the report.
when user run the report for a week (02/02/2009 - 02/08/2009) and then drill down on particular char its working fine (first time).after that when he is trying to change and execute the report for other week on the same instence ( 02/09/2008 - 02/15/2009) by clicking on refresh and passing new values to the variable its showing up correctly at the time of drill down on free char its showing as *no applicable data found.*
when he logoff the system completey and run the report for the week( 02/09/2008 - 02/15/2009) values it is showing up with values even tough he drill down on free char.
issue basically when he was trying to drill on free char by chaging different date values in the same instance by clicking on refreh and by entering diffrent values its showing up as not applicable data found.
but when he enters the values for different weeks each time by closing the system and relogin report is working fine and showing up data eventough he drill down on free char.
Please help me out!

Dear
Please check if any condition or exception you have created for that query.
Or still problem exists check SP level.
Regds,
Sachin J

Issue with the drill path in Hierarchy in OBIEE 11g

Hi ,
We have upgraded to 11g(11.1.16.6) and an issue we are facing is that the drill path for the time hierarchy is not same.
In 10g its Year >Quarter >Month>Date.
BUt in 11g its rendering as Year >Quarter >Month>Week Number >Date.
The week number is present in the hierarchy defined in the RPD, but the week number has "Use for Display " unchecked.
Not sure why it then is coming up in the drill .

Hi,
You try to make the changes in the hierarchy as per required,and clear the cache then reload the rpd and then restart the services.
its just a try, and reward me if it correct.
Thanks,
tinku

Drill down value not matching with Displayed Report Painter Issue-GR55

Hi,
Need your help for an issue in drill down value of report painter from actual cost coloumn.
I have created a new report group based on OSS Note-157720 in GR55 Traction. This new report group will provide data of Planed / Actual cost, Planned / Actual Quantity of the project in range of fiscal year/periods. The issue in this report is displayed data of actual cost is not matching with drill down data. The actual cost coloumn is formula coloumn which framed by subtracting All periods cost coloumn, Before Periods Cost Coloumn and After periods cost coloumn.
Could you suggest on this issue.
Thank you for your cooperation.
Regards,
Rakesh

The report you are running first might have been created with some hidden columns that contain more than one variables relating to period and fiscal year. These may not be matching those that are required to run the drilldown. Look into the definition of the drilldown report. If you would want to match the first report, It may be better to identify which report runs on drilldown and the run that report with the required parameters.

Report Designer drill down issue

Hi Friends,
I am having an issue with report designer.When i run the report designer the characteristics are getting displayed in drill down form for each row of values.Is there any way to restrict this. i want to display the header part in tabular view.
Thanks in advance.
Mandadi.

Hi Srikanth,
In Report designer output i'm getting the header part as drill down which i dont want.
i want the output in the following format
header1        header2          header3       value
xxxx             abc                efg                10
yyyy             cfg                 tre                20
but i'm getting in the drill down format as follows
xxxx
abc
efg           10
yyyy
cfg
tre           20
Thanks
Mandadi

URGENT: Issue with hierarchy level keys and report drill down

Hi,
BASIC STRUCTURE:
I have created a subject area with 3 facts (FACT_A, FACT_B, FACT_C) and 4 dimesnions (TIME_DIM,DIM_2,DIM_3,DIM_4). Each fact table also has additional aggregate tables aggregated along levels of the time dimension. Also our timw dimension has aggregated dimension tables like TIME_DIM_WEEK, TIME_DIM_MONTH, TIME_DIM_QUARTER and TIME_DIm_YEAR.
GOAL:
All 3 facts have the same measures M_1 and M_2 in them but may not have data for the same dimension values selected.
For example
For month JAN 2000 FACT_A.M1=100$ and no data exists for JAN 2000 in FACT_B and FACT_C. Then in the report
for JAN2000 it should show FACT_A.M1= $100, FACT_B.M1 = 0 and FACT_C.M1 =0. In this case I should be able to drill down to the lowest level.
ISSUE:
The time dimension TIME_DIM has the following levels - Total -> Year -> Quarter -> Month -> Week -> Day
However I am having an issue with drill down in the reports whenever I pull metrics from more than 1 fact at a time. I have defined the level keys but not sure if I need to do anything in addition since I am using aggregates.
I have to fix this issue quickly. Please help me.

Alastair,
All the fact tables have aggregated facts as sources.
I have checked the levels set for each of the sources to the time dimesnion table in BMM and they look okay. So the Time dim table in BMM has 4 source tables
Time_Day (level set to day, table key is "day"),
Time_month (level set to month, table key is "Fiscal_Month_Code"),
Time_Quarter(level set to quarter, table key is "Fiscal_Quarter_Code") and
Time_Year(level set to year, table key is :Fiscal_Year_Code").
Note: No time week aggregate added as logical source.
Again the time dim hierarchy based off of this table has levels: Total -> Year ->quarter -> Month -> week -> day
The levels keys set for each level are
Year -> Primary key is Year_Name (YYYY)(Checked as chronological key) and another key is Year_Num (YYYY)(Checked as chronological key)
Quarter->Primary Key is Quarter_Name (YYYY Qn), another key is Quarter_Number (Format n where n can assum values 1,2,3,4). Both keys are set as chronological keys
Month -> Primary key is Month_Name (MON YYYY), another key is Month_Num (Format n where n can assume values from 1 to 12) Both keys are set as chronological keys
Week -> Primary Key is week name (YYYY Wk nn, where nn can have values from 1 to 53), another key is week num (nn, where nn can have values from 1 to 53)
Day -> primary key set to day (date format)
Issue1: When I try to drill to lower levels it throws out an error saying report cannot find any data because filters may be too restrictive even though I see data at higher level
For ex: If I drill down to Year: 2010 and Qtr: 2010 Q2 and M1:$100 when I click on Qtr to drll to month level it throws me the error
Issue2: when I add year and qtr colums to the report I see data as below which is incorrect
Year_Name Qtr_Name data:FACTA_M1 Data: FactB_M1
2009 2009 Q1 $10 $5
2009 2009 Q2 $20 $80
2009 2009 Q3 $20
2009 2009 Q4 $30
2010 2010 Q1 $100
2010 Q2 $101
2010 Q3 $102 $230
2010 Q4 $103
2011 Q1 $10
In the above example year_name is not showing up for 2010 Q2 and after. However if I change the primary key for level 'Quarter' by having key consist of year name and quarter name instead of just quarter name the issue doesnt occur and drill down works great. The only issue is when I drill from qtr it first shows year name and quarter name instead of showing the next level which would be month name.
Sorry about the long message but I thought you might notice something in how I have set up the keys.
Thanks

Issue with Drill Through Reports in Essbase Studio.

Hi,
we are using essbase studio to drill through to the source table in Oracle.In drill through definition the query is like , select * from source where (Project IN ($$PROJECTS-VALUE$$)). Project column is located in source table and PROJECTS-VALUES are located in Essbase under project dimension and we will select the values in smart view. we are using smart view to check drill through reports.In smart view, If i select one member at gen-2 level which contains 1450 level-0 members,It is saying as error in executing the report in line 1972. Is there any limitation with IN condition , such that oracle takes only limited values like count of 999.we are facing issue only at gen-2 of project and it is working good from gen-3.
Please let me know is there any kind of certain limitation.

It is possible you are overloading the parser. If the projects table/view is a recursive join, when Studio creates the $$Project-value$$ is actaully returns all the level zero members under the member selected(at least in 11.1.2.X. If the list is huge, it might have problems. I would open an SR to see if there is a limit. It might be number of characters or values

Webi Drill down issue - SQL AS

Hi Guys,
Did anyone encounter the following issue?
There are 4 dimensions(one of them is Date) and 1 measure in my Webi Report.
When I drill down from one measure to another, the SUM of that measure will not the same with its upper Level.
For example, Level 1 is:
Country   total sales
China       1000
Then drill down to Level 2:
Region total sales
North    100
South   200
West    300
While, the SUM of total sales of the three region is not equal with China.
Your help will be highly appreciated.
Thanks.
Regards,
Daniel

1. Please check your SQL Query gives Country - Region Wise perfects output/result or not..............
2. Check any Filter is set or not (from info view/edit Query/universe)
Please check correctly.
Thanks

Hierarchy drill down issue at the lowest level

Hi,
In OBIEE 11.1.1.5 I face an issue with drill down to lowest level of presentation hierarchy (expanded by "+" in report). It happens only for combination of 2 dimensions presentation hierarchies in analytics report (parent-child organizational structure + level based product categorization). Aggregated date comes from OLAP but lowest level product information comes from relational database and this details are not displayed.
First I drill to particular sales rep in organizational structure. Then for that sales rep I need to drill down product hierarchy and it works except lowest level of details. At the lowest level of product hierarchy, query sent to database (I have it from logs) return proper results (checked directly in db) but report behaves the way like there are no details at the lowest level and product details are not displayed.
Both (Organizational structure, Product) dimension presentation hierarchies works ok at all levels when used separately. Also product hierarchy works well at all levels (including OLAP->relational drill) when used togather with other level-based hierarchies in subject area.
I am wondering what I could have done wrong...
Advices are very welcome!

Hierarchy keys are set properly and "use for display" is checked.
Dimension presentation hierarchies does not work only when I use particular two hierarchies togather in one report table. When each of hierarchies is displayed separately it works ok.

Drill down issue in report painter report

Hi-
We have an issue where the drill down in one of our report painter reports isn't working. When the user tries to drill down, it says the list contains no data.
However, if the target report (of the drill down) is run first, and then the report painter report is run, the drill down will then work properly.
We need to know where to check to get this fixed. It has us stumped. The report painter report is associated with a report group.
Thanks,
Kevin

Just needed to update the variant from the calling program's report group. Duh.

Drill Down Report issues in VS 2010, CR viewer 12

We are using VS 2010, Crystal Reports 12 with Crystal Viewer 12 control called from a C# programmed page frame. Several Drill Down reports are developed with CR 12 service pack 1 and then deployed onto the server.
These Drill Down reports work great within the viewer. But Two critical issues have been discovered,
1.     With the drop down report, the next /last page buttons work on the main page, but it doesnu2019t work on any of the drill drop sections.
2.     The print / export functions work on the main page. Using the print / export functions from the Drilled down pages reverts back to the main page, not the drill down page that is being viewed.
Has anyone else seen these issues and know of a fix. Wondering if it might be something in the viewer settings within the .net or the version of viewer ?
I have viewed the CR .Net API Reference but probably due to lack of .net knowledge, seems overwhelming to me.
Thanks

Hello,
Hope you can use this code to export report in pdf with the drill down options/nodes.
CrystalDecisions.CrystalReports.Engine.ReportDocument rd = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
   /// Calling a sample report named Employee Sales.rpt with parameter
   rd.Load(Application.StartupPath + \\..\\..\\Employee Sales.rpt);
   rd.SetParameterValue("Login Name","Robert King");
   ISCDReportClientDocument rcd = rd.ReportClientDocument;
   ISCRPDFExportFormatOptions exportFormat = new PDFExportFormatOptionsClass();
   exportFormat.CreateBookmarksFromGroupTree = true;
   //Create an array of bytes of the report.
   PrintOutputController rasPrintOutputController;
   rasPrintOutputController = rcd.PrintOutputController;
   // Define the export format as PDF, and apply the PDF export options
   CrystalDecisions.ReportAppServer.ReportDefModel.ExportOptions expOpts = new CrystalDecisions.ReportAppServer.ReportDefModel.ExportOptionsClass();
   expOpts.ExportFormatType = CrReportExportFormatEnum.crReportExportFormatPDF;
   expOpts.FormatOptions = exportFormat;
   // Use the PrintOutputController class to export the report based on the defined export options.
   ByteArray tempByteArray = rcd.PrintOutputController.ExportEx(expOpts);
   Byte[] byteStreamOutput = tempByteArray.ByteArray;
   // Create a new file(MyExportedReport) with the specified path, name, and file extension.
   FileStream fs = new FileStream("C:\\Windows\\Temp\\MyExportedReport.pdf", FileMode.Create, FileAccess.ReadWrite);
   // Stream the bytes from the exported report to the newly created file and close the file stream.
   int maxSize = byteStreamOutput.Length;
   fs.Write(byteStreamOutput, 0, maxSize);
   fs.Close();
   MessageBox.Show("Export is done in C:\\Windows\\Temp location");
Thanks.

Drill issue

Similar Messages

Maybe you are looking for