Drill-Through Error Smart View And Web Analysis

Hi,
After upgrading to Hyperion 11.1.2.1 , I get below error for drill through define from EIS. I get error when performing drill through from Smarview and Web ANalysis.
Error :- [1033] Native: 4006 Error: Internal Essbase JAPI error: [Cannot perform cube view operation. Essbase Error]]; nested exception is:
com.hyperion.ap.APException: [1144] Error

Hi
thnaks for your replay it helped me in sloving the SV issue now the Drill through is working fine ffrom SV to FDM,
but now the problem is with FR, we are not able to do the drill through from FR to FDM,
can you please suggest any solution for FR also it will be a grt help...
Thanks again for your help
Regards
Sri..........

Similar Messages

Can't load data through smart view (ad hoc analysis)

Hi,
There is EPM application where I want to give ability to planners to load data through smart view (ad hoc analysis). In Shared Services there are four options in
EssbaseCluster-1: Administrator, Create/Delete Application, Server Access, Provisioning Manager. Only Administrator can submit data in smart view (ad-hoc analysis). But I don't want to grant Essbase administrator to planners, I'm just interested to give them ability to load data through ad-hoc analysis. Please suggest!

I take that you refreshed the Planning security, If not refresh the security of those users. Managing Security Filters
Check in EAS whether those filters are created with "Write" permissions.
Regards
Celvin
http://www.orahyplabs.com

Workspace and web analysis

hi friends,
i want to view the cube which i have developed in hyperion 9 in web analysis.i tried to install it. but the bi+services is not starting properly.i was able to open the workspace web page but while giving username and password it says to start the server. can you guide me through the steps of installation of workspace and web analysis.
Thanks.

Hi,
I installed Foundation services, essbase server, EAS, hyperion planning 9.3.1, EPM and configured all of these in shared services.
Now I want to access planning through web or atleast see where the planning is set up..I think I need workspace for this.. can you let me know how to install workspace or how to view the planning applications..
Regards,

FR and Web Analysis reports will not run in workspace

I have configured both FR and Web Analysis and then re-configured workspace to pick them up. 'Reporting and Analysis shows up in my foundation metadata under workspace. All my related ports are enabled.
Database connection manager, import financial reporting reports, preferences financial reporting, tools/link to web analysis, do not appear in workspace.
get 'required application context analyzer is missing. please contact your adminstrator.' error when try to run a web analysis or financial reporting report from workspace.
Web analysis as a client with reports is working fine.
Financial reporting allows me to create a database connection, create a report, pdf preview from the client but web preview breaks with generic page not found error.
Any suggestions would be most appreciated.

Hi,
You can use panel while creating reports and put all the graphs on it .
Panels color can be changed.
Thanks
Yashwant

Performance issues when using Smart View and Excel 2010

Hello, we are experiencing very slow retrieval times when using Smart View and Excel 2010. Currently on v.11.1.3.00 and moved over from Excel 2003 in the last quarter. The same spreadsheets in 2010 (recreated) are running much slower than they used to in 2003 and I was wondering if anyone else out there has experienced similar problems?
It looks like there is some background caching going on as when you copy and paste the contents into a new file and retrieve it is better.....initially. The size of the files are generally less than 2mb and there aren't an expecially large number of subcubes requested so I am at a loss to explain or alleviate the issues.
Any advice / tips on how to optimise the performance would be greatly appreciated.
Thanks,
Nick

Hi Nick,
Office 2010 (32 bit) only is supported.
Also check these documents:
Refresh in Smart View 11.1.2.1 is Slow with MS Office 2010. (Doc ID 1362557.1)
Smart View Refresh Returns Zeros (Doc ID 758892.1)
Internet Explorer (IE7, IE8 and IE9) Recommended Settings for Oracle Hyperion Products (Doc ID 820892.1)
Thank you,
Charles Babu J
Edited by: CJX on Nov 15, 2011 12:21 PM

Workspace and Web Analysis - null folder automatically created

Hi.
We have recently installed BI+ service pack 9.3.1.3. Since that, we have been experiencing problems on Workspace and Web Analysis: in particular, a null folder is automatically created as users login to Web Analysis Studio.
Moreover, it is not possible to assign Web Analysis' shared preferences, because of that null folder. In fact, users' preferences always shows path to null folder: for example, Document Folder path points to /Users/null/Reports for every user logged in to Web Analysis Studio. By this way, it is not possible to save changes.
Looking at BIPLUS repository, I noticed that in HYA_DB_PREFS table, there is a record containing NULL value for field USERNAME. I was wondering whether this record normally exist in the table or it could be related to the problem that we are experiencing. Does anyone have similar record in his installed BI+ environment?
Thanks a lot in advance for help

Hi Andrea
Since the installation from service pack 9.3.1.3 we've new problems on Workspace and Web Analysis too.
Null folder ist automaticall created as users login to Web Analysis Studio
And it is not possible to save changes in Workspace Preferences, except I'm login as Administrator
Have you found a solution?
Thanks a lot.
Edited by: DIDM on Oct 7, 2009 3:15 PM

Checklist for installation of Financial reporting and web analysis

Hello All,
Can anyone give me a checklist for installation of Financial reporting and web analysis. The checlist should contain the points/information that the installed FR and WA is proper or not. Please let me know if this this is the correct forum for reporting doubts, if not then plz guide me to the correct oracle forum.
Thanks a lot
Ashu

For which version?
Here is the link for 11.1.1.3 EPM Deployment:
http://download.oracle.com/docs/cd/E12825_01/nav/portal_1.htm
And specifically for Reporting and WA:
http://download.oracle.com/docs/cd/E12825_01/epm.111/readme/ra_1111300_readme.html
Hope this helps.
A

Adhoc and web analyser

hi,
my question is Adhoc queries in BW-3.5x and web analyser in BI-7.0 is same? and tell me some initial steps to create Web analyser reports in WAD. and how to add print templete in that and how to attach document in reports.
regards,
preety

Hello Preety
Please refer this document search for Print Template
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b931a890-0201-0010-268d-a7bedf8aa720
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/bc4fa990-0201-0010-588e-ca4e63050d6d
http://www.bwexpertonline.com/archive/Volume_02_(2004)/Issue_05_(May)/V2I5A1.cfm?session=
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70e18305-2356-2910-4bbe-9c1ebd751032
Thanks
Chandran
Edited by: Chandran Ganesan on Feb 12, 2008 4:45 PM

Migrating HFR and Web Analysis Reports and Documents

Dear All,
Is there any way I can migrate HFR and Web Analysis Reports and Documents from test environments to production instead of re-creating reports?
Thanks,
ioGGo.

For HFR reports,
- If you want to do a bulk export, then choose File->Export & select multiple reports & save to a .zip file when prompted. In this case, reports' folder hierarchy is maintained the same as in source.
- If you want to do a selective export, select the folder(where your report is present) from the (left)navigation pane. Then choose File->Export, select the report & save to a .des file when prompted.
For WAS reports,
you may export each report definition from File -> Export. I believe- it'd let you save as .apt file.
However, for both type of reports, you need to ensure the respective database connection file(s) are already present before you import the reports/documents in your prod. environment.
- Natesh

Error when opening workspace, web analysis and shared services

Hi All,
We installed hyperion 11.1.2, Essbase on a AIX server, with reports etc on a windows 2008 server. when logging onto workspace, web analysis and shared services i get the following error message:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
If we re-start the server it sometimes work, but in the morining we have the same issue, can anyone help.
Thanks
Dylan

Hi,
Restart the services. Issue with Oracle Http server. If you restart foundation and other services I can bring workspace up.
Thanks
Radhika

Essbase Studio - SmartView - Drill Through Error

Hello!
I'm creating a drill through report using Essbase Studio 11.1.1.2. Built the Context, the Report Content and Associations. Perform an ad-hoc analysis via SmartView. Perform a Hyperion | Drill Through Reports and the follow error occurs:
Unable to list Essbase Studio Drill Through Reports : Error in the statement interpret. Line = 1109
Anyone know what causes this and how to resolve it?
Thanks,
Bob

The issue was due to using transformations to prefix characters to ids. The drill through couldn't resolve the cube member name to the data in the tables.
For example, if your source data for your accounts table has an member id of 1, 2, 3 etc. But you use a prefix of A in transformation to build the member in Essbase (A1, A2, A3, etc.), drill through can't resolve it. Drill through is going back to the table and searching for A1, A2 or A3. The table has 1, 2, or 3. A string is not a number, that's the error that basically occurs.
Solution - I updated my tables to have the prefixes (and data types) and removed the transformations. That way when drilling, the Essbase member matches up with the table id.
Thanks,
Bob

Financial reportin,Interactive reporting and web analysis

Hi,
Could anyone help me in what kind of reports exactly generates by the above 3 tools.How we will generate reports using financial reporting.i mean to say what process we will follow .
In a financial domain project , what we will do exactly with the above three tools.
I am quite interested to know as much info as i can on these 3 tools.
replies will be highly appreciated.

This is quite a big subject and you need to do more investigation, but as a starter for ten (these are high level views only)
Financial Reporting - is used to create high quality, high format reports - ideal for finance based use
Web Analysis - is used as a more interactive visual tool, with emphasis on exceptions/graphs and drilling etc
Interactive reporting - is one of the old Brio tools and is more of a BI reporting tool
There is a Query and Reporting forum at Hyperion Query and Reporting that might be useful to post on.
Hope this helps.
Andy King
http://www.analitica.co.uk

Error while opening the web analysis reports.

Hi,
Whenever i am trying to open any web analysis reports i am getting the error message as "error occurred while opening document. document Id={0}. Is anyone have any idea about this issue.
Thanks & Regards
Ekta

Hi,
I had also faced this problem earlier. I was using HFM as data source for WA reports. After searching I found that there was some change at HFM level. Some dimensions/members had been deleted or added in HFM. And I was using those missing members in WA Grid.
I had to recreate my reports again as I didn't get any other way to deal with this problem.
Please shared any other alternative option, if you found while working on this issue.
Thanks & Regards,
Mohit Jain

Smart View Vs Web data form entry

Hi
I am currently developing a planning model that is due to be rolled out a number of non finance users.
I find entering data on a web form quite time consuming and not very user friendly. For example when scrolling across left to right the screen doesnt automatically scroll with you.
I have seen that on smart view data can be entered on a form using excel however the worry is here various spreadsheets could be saved all around the place losing the benefit of entering the data in one source.
Has anyone had any experience of rolling out smart view to non finance users?
Thanks

We're just about to roll out an application with and have demonstrated both the Web Forms and Smart View methods of submitting data. Most of the data will be consolidated using various offline spreasheets so the desire for our users is to copy and paste large blocks of data rather than enter them directly onto the Web Forms/Smart View forms. Some of our forms have 100's of rows so for this reason Web Forms aren't really an option given the time it takes to copy and paste a block of data from spreadsheet A to Web Form B. The difference was 1 minute (spreadsheet>Web Form) vs 1 sec (spreadsheet > Smart View Form) for some forms.
As soon as we demoed both methods, this was confirmed, the users started to think of ways they could link their backend spreadsheets to the Smart View forms for ease of submitting data. Early indication is that most users will save a copy of their relative forms on the local machines as a template. They will then use this template to consolidate the data from the external spreadsheets offline. Once they are ready to submit, they intend to copy the whole block from the template into a fresh retrieve of the form for submission.
We haven't looked into offline forms due to the concerns we had with users creating links between the offline form and multiple external spreadsheets. We're just not sure at this point whether it is possible or suitable. It is very unlikely that any values will ever be keyed directly into the form.

Hyperion Planning form change not flowing through to Smart View

Hyperion Planning 11.1.2 and Smaer View 11.1.2.
I have a user that installed SV yesterday but has been using planning for years. I made a change on his planning form (just added an account) and he does not see this change in smart view. However, he does see the change when logged into Hyperion Planning in his form.
One strange thing about this is the change shows for all hierarchies except for ones that he has loaded data to. So, for a hierarchy that has no data, it shows the form in SV how it is in planning. If he loads data to the hier, the form automatically switches back to how it was before the change, even when the planning form itself hasn't been changed.
Here is what we have tried:
Rebooted machine
removed user security completely from plannng and added back
checked for ghost instance in task manager or excel
Opened new Workbook and opened form fresh
remvoed connection, closed excel and all instances, new connection and open form fro mblank slate
Nothing seems to be working. And I see the form how it is in planning. HE does not, he sees it the "old way" and ony for hier points that have data submitted to them. So, literally switches the view based on the POV.
Any help would be greatly appreciated.
Edited by: kplum12 on Jun 15, 2012 11:48 AM

Hi,
Sounds like in the smart list set up you set "#Missing Data Form Label:" to "Data Form Setting" change it to "Drop Down Setting" and it should be alright.
Cheers
John
http://john-goodwin.blogspot.com/

Drill-Through Error Smart View And Web Analysis

Similar Messages

Maybe you are looking for