Drill through from Hyperion Financial Report (Data Source as Essbase)

Hi All,
I would like to create a Report in Financial Reporting studio by connecting to a Essbase application. Once i open the Report, if i click on Metadata, can it take in to Relational Database tables (Drill through capability) ? Is this option available in FR Studio ? Pls. help
Thanks,
PVR

This link might be helpful to you:
http://www.oracle.com/technetwork/middleware/financial-management/tutorials/obe-fr-erpidrillthru-100179.html
Cheers
Vikas Naidu

Similar Messages

  • For Drill Through From Hyperion Workspace Forms to Oracle - EBS - Financail

    Hi
    i need to drill through from Hyperion Workspace Forms to Oracle - EBS- Financial.
    What are approaches ?
    Weather it is possible by using FDM? or ERPi adapter ?
    Or it requires all Tools (FDM, ODI, ERPi ) ?
    Urgent ..
    Need ur help ?
    regards
    Sher

    FDM/ODI/ERPI, but note it is feasible to load data using ERPi without FDM (but still need ODI installed) in which case it should drill back via the ERPi landing stage.
    Before going any further i think you need to decide on your data flows and whether you use ERPi or ERPi / FDM to load data, and perhaps search the internet and read some documentation to understand the system, or, get some consultancy.
    Edited by: user10757003 on 20-Sep-2012 09:04

  • Error drill-through from Hyperion to Oracle GL with ERPI

    Hi
    I am using ERPI to load data from Oracle GL 11.5 to Hyperion PLanning 11.1.2.1.
    The data are well loaded. Tje drill-through from Hyperion Planning to FDM is ok.
    But whe I try to execute the drill-through from FDM to Oracle eBS, I have the following error message :
    Invalid ERPI URL
    Return value from erpi web service : java.lang.exception: Invalid DataKey (33487765): No record found.
    ERPI Data Key value: 33487765
    I have another application with the same source and the same target and the drill-through is ok.
    Thanks in advance for your help
    Fanny

    Are you modifying the source value in any way before import into FDM? Using an import format in FDM for example?

  • How to Drill Through from Hyperion Reporting to Oracle - GL by using FDM?

    HI
    I am new to FDM.
    I already Installed and Configured FDM.
    I need to provide Drill through functionality on Hyperion Planning Workspace (Hyperion Reports built using Hyperion Financial Reporting Studio and Data Forms) to Oracle Financials(GL) by using FDM.
    I think 1st i need to develop Application in FDM Workbench to Push data from Oracle Financials to Hyperion Essbase.
    than i need to enable "Drill" on Hyperion Finaical Reports.
    Can you please share link , guide or any thing.
    Its urgent please.
    thanks
    Sher
    Edited by: Sher Ullah Baig on Sep 13, 2012 3:22 PM

    Thanks
    But when i try to log in i m getting error bellow"
    Failure of server APACHE bridge: No backend server available for connection: timed out after 10 seconds or idempotent set to OFF."
    So do u have any other reference plz
    thanks

  • How to get XML format output from Hyperion Financial Reporting

    Dears,
    We are using Hyperion Financial Reporting to replace FSG in fusion. I found that Hyperion FR report can be exported to html/excel/pdf format. However, I would like the report to export to xml format.It means I only need the xml data source.
    Anyone who knows how to get the xml format output from Hyperion FR, is there any avaiable API?

    I think if you export the report, you will be able to open the .des file in Notepad/Wordpad and see xml content.

  • Drill down from the financial reports

    When generating a P&L or Balance sheet, it is not possible to view what transaction the amount is made of. you have to either generate a general ledger report or have to chart of account window open at the same time. Simple programs like quickbooks have the functionality to do drill down from any report. we have multiple customers for whom this situation is very aggravating.
    We hope you can find a solution or make this part of a new release.
    Thank you
    Sophie St-pierre

    Hi
    I hope you will get answer from this solved using pop up window for drill down
    Thanks & Regards
    Harsimran

  • Drilling across in Hyperion Financial Reporting

    Hello,
    We are migrating a few reports from BO to HFR. The BO reports have a functionality to drill across another dimension. Does anyone have an idea about how to implement the drill across functionality in HFR.
    Thanks,

    HFR supports two kinds of "drilling"
    Related content links allow you to link FR with other Hyperion products for more Ad hoc analysis.
    Cell document links allow you to link actual reports or documents with a particular HFR cell.
    Hope this helps,
    Brian Chow

  • Showing Annotations in Separate column in Hyperion Financial Report with source Essbase ASO

    Hi All,
    I've a Report in FR and user has to enter the comments and the entered comments should display in Column. I'm using Annotations here and created a separate column and written formula <<Annotation(cur, cur, F, cur, Desc)>>. The comment is displaying in the column, but to see the comment / annotation one has to select View -> Annotations. Is there any way to get rid of this. With out selecting View -> Annotations option can the comments directly displays in column when user opens a Report ?
    Or Is there any other way that user can enter comments in FR ? Essbase ASO cube is my source
    Thanks,
    PVR

    I don't think there is another way for that. Did you try the pdf view?
    You can try using LRO's
    Regards
    Celvin

  • Drill through from Reports to Analyzer

    Is it possible to have drill through from Hyperion Reports to Analyzer? Do we need to perform an extra installation procedure for doing this?<BR>Thanks<BR>Arun

    Has anyone replied to you regarding this topic? I'm trying to find out as well. I want to drill from Financial Reports, with Essbase as the data source to Relational Data, similar to Web Analysis. I understand that this is not likely, but would like some confirmation with a technical explanation. Perhaps Financial Reports does not use the same API or adm process that the Excel Add-In and Web Analysis uses? From my understanding, the relational mapping goes through Essbase. If the main data source for Reports is Essbase, why can't it read the mappings see the relationship with AIS? Any help is appreciated.<BR>

  • When drill through from FR report, navigate to FDM landing page.

    Hi,
    Data loaded in HFM 11.1.2.1 using FDM 11.1.2.1 and it has been replaced by ERP integrator 11.1.2.1.501. When we perform drill through from Financial reporting report it is navigating to the FDM landing page instead of ERP integrator landing page. In FDM landing page, showing the ERROR:
    "Error: Error Retrieving recordset"
    Anyone please help me to solve this issue.
    Thanks,
    Yamuna

    Hi ,
    My guess is that , when you loaded the data from ERPi the drill regions created by FDM have been over written. Hence you are not able to drill down to the FDM page. This happens in most of the scenarios , where if the data is loaded across an intersection using FDM and then again the data is loaded in the same intersection using some other way like Flat Files or ERPi the Drill Regions or Drill POVs get compromised.
    To confirm whether your FDM drill back is working or not , create a simple form using any of the intersections from your dimensionS ( not the same ones used above ) and load a single line of data using FDM across those intersections in the form. Try drilling back to the FDM Landing Page and check. Same way , create a report for the same intersections and check drill back to FDM. Remember to check the :Drill - Through" check box in the property grid in the Grid Properties for that report.
    Regards

  • Drill Through from FDM/ERPI to Source ERP

    Per my understanding, when loading data from FDM to a Target EPM system, the drill through from say HFM back to FDM would log on using your credentials via SSO. In other words, I log in as testuser in HFM and drill through, then that testuser id and password must be set up in shared services in the same manner in the epm target system as well as FDM.
    Does the same hold true when you drill through from FDM/ERPI back to the Source ERP? In other words, the same ID and password must be set up in HFM, FDM, and say EBS ERP? Or is there a way to set a Global ID for the drill from FDM to the ERP?
    Thank you in advance

    Hello,
    In the situation you have described unless the Authentication mechanism and the style of that mechanism for all the environments (in this sitaution Hyperion vs. Oracle EBS) are identical then there is no unified approach. Generally when going from Hyperion into Oracle EBS the EBS landing page is returned prompting you for valid credentials.
    In order for this to work in on seemless move you would have to use OID with OSSO.
    OID = Oracle Internet Directory
    OSSO = Oracle Single Sign On
    Thank you,

  • Thread: In Hyperion Financial Reporting can we show comments entered in dat

    Hi,
    I want to show comments in Hyperion financial reports. The data form are against BSO cube and when users enter comments in it they want to see in reports which are against ASO.
    Also, if you can help me if it is possible against same cube?

    Hi,
    I think we can't show it in ASO, but if we have a BSO cube then we have to connect our reports with the Planning data source instead of an Essbase data source and specify on the report to show supporting detail.
    You have to do some settings in the FR_Global.properties which are:
    AllowCellTextAsAnnotation=true, the Cell Text check box on the Report Property sheet is shown (for Financial Management and Planning, not Essbase yet). The default setting will be unchecked (turned off).
    AllowPlanningUnitAnnotationsAsAnnotations=true, the Planning Unit Annotations check box on the Report Property sheet is shown for Planning. The default setting will be unchecked (turned off).
    AllowDocAttachmentsAsAnnotations=true, the Document Attachments check box on the Report Property Sheet is shown for Financial Management. The default setting will be unchecked (turned off).
    Hope this helps.
    Regards
    SST.....

  • In Hyperion Financial Reporting can we show comments entered in data forms?

    Hi,
    I want to show comments in Hyperion financial reports. The data form are against BSO cube and when users enter comments in it they want to see in reports which are against ASO.
    Also, if you can help me if it is possible against same cube?

    Hi,
    I think we can't show it in ASO, but if we have a BSO cube then we have to connect our reports with the Planning data source instead of an Essbase data source and specify on the report to show supporting detail.
    You have to do some settings in the FR_Global.properties which are:
    AllowCellTextAsAnnotation=true, the Cell Text check box on the Report Property sheet is shown (for Financial Management and Planning, not Essbase yet). The default setting will be unchecked (turned off).
    AllowPlanningUnitAnnotationsAsAnnotations=true, the Planning Unit Annotations check box on the Report Property sheet is shown for Planning. The default setting will be unchecked (turned off).
    AllowDocAttachmentsAsAnnotations=true, the Document Attachments check box on the Report Property Sheet is shown for Financial Management. The default setting will be unchecked (turned off).
    Hope this helps.
    Regards
    SST.....

  • Hyperion Financial Reporting - Export to Excel converting Data to Text

    We are using Hyperion Financial Reporting 11.1.2.2 with Hyperion Workspace 11.1.2.2 reporting on an ASO Essbase cube version 11.1.2.2.
    When we export a report to Excel any data values that are displayed in the report with a negative ('-', '()', etc.) sign come into Excel as a text value. The cell has the green flag and the single quote in it denoting this a text field. The format is listed as 'Custom'. Updating the format does not remove the single quote.
    The same result is happening if we display the natural sign in the report or if we flip the sign in the report. This DOES NOT happen when choosing the export query ready, only when using the File -> Export -> Excel.
    Does anyone know if there is a hot fix or service pack or configuration to resolve this? How about a work around?
    I thought I remember this happening in 9.2 and being resolved in 9.3. We have recently upgraded from 9.3.1 to 11.1.2.2 and the issue is happening again.
    The users would like to export the formatted report to Excel and be able to interact with the data cells as numbers.

    The issue is reported as a bug. Installing patch 14625370 (11.1.2.2.302) and/or 16088101 (11.1.2.2.303) should fix the problem.

  • What HFM Table contains the Hyperion Financial Reporting Modify Date

    Does anyone know the name of the HFM table that contains the Hyperion Financial Reporting Modify Date field of a Report?
    Thanks!
    Edited by: user2609991 on Sep 1, 2009 8:49 AM

    1. no "HFM Table" stores any information about Financial Reporting reports. Financial Reporting is part of the "BI+" / "Reporting and Analysis" product, so if there was any information to be found in a relational database, it would be in the BI+ schema not the HFM one.
    2. Oracle / Hyperion do not support customers trying to build their own relational database integrations directly into product repositories. To interact with the BI+ product (e.g. to extract modified by dates of FR reports) you should read up on the API and write custom code using that API. More information can be found in the Developers Guide here http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/hs_developer.pdf and in the "javadoc" documentation that comes with the BI+ product.

Maybe you are looking for