Drill through from one query to another query
Hi experts,
Anybody knows how to do drill through from one query to another query?
Any feedback will be really apreciated.
Thanks.
The setting can be done in transaction RSBBS.
You only need to specify the sender and receiver query..
Ashish..
Similar Messages
-
Advanced template to drill down from one dimension to another
Dear all:
Situation
I am trying to create an report that displays my Accounts by month. In addition, after I double-click each account (if it is a base member), it drills down to open Entity (in my case Cost Center) associated with that Account number. In the Entity drill-down section, once the Entity becomes a base member, it drills down to IO (internal orders) associated with a particular cost center.
Data
1. I tried to manipulate existing "Double Drill Down" dynamic template, and disabled the column expansion (because my columns consist of months of actual vs. budget and some ratio calculation). The problem is that after I drilled down, my EVGTS formula was not replicated in the other dimension
2. I tried to integrate EVEXP into EVDRE but was unsuccessful too... The expansion worked as if everything got expanded at the same time.
Question
Is my approach correct? Is this an even good practice to do, or I should keep it as standard as possible?
Thank you!
Have a great day!
Sincerely,
BrianThe double-drill down dynamic template accommodate my need, except I didn't modify the report to my format correctly.
-
Can we drill down from one application to other in design studio 1.2
Hi All,
Can we drill down from one application to another application in design studio 1.2?
I have a requirement where in on clicking one should drill down to a detail level information shown in a different application.
Regards,
TanishaA quick suggestion would be to look at OpenDoc - see this thread Passing Parameters with OpenDocument in SAP Des... | SCN
-
SSRS - Drillthrough from one tablix to another
Experts,
I am working on an SSRS report with 2 tablixes(tables) with different data sets and having different columns. E.g - When user selects ONLY Param1 then all other parameters are defaulted and 1st tablix shows up.
Now, if he selects Param1,Param2,Param3 then my other tablix shows up (this one has different columns than my 1st tablix).
Requirement is, from the first tablix, I need to drill through from one column (let's say, "State") to my other tablix. Means, if a user clicks on "State" in the 1st tablix, then the values will be passed from the 1st tablix to the 2nd
tablix, and the 2nd tablix should show up ONLY for information related to that "State".
I know sub report is a work around, however, is there a way to accomplish this using 1 RDL file?Hi SqlCraze,
According to your description, you want to create two tablixs in a report, when you click values within “State” column in the first tablix, the value will be passed to filter the second tablix, right?
In Reporting Services, there is no setting for us to enable drill through action between two report items within one report. In one report, we could use Bookmark feature to jump between two report items, but it can’t pass parameter values to filter target
report item. So in your scenario, your requirement can’t be achieved currently. As you mentioned, you could use two reports, then perform drill through action.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support -
How to transfer ABAP query from one server to another server
Hi all,
I have a ABAP query in development server and i need to transport it to production server.
I have attached a transaction to it using the program which got generated in the back ground
from the abap query in the developemnt server.
I have downloaded and uploaded a ABAP query from one server to another server.
But the program which got generated in the back ground in the production server is different from
program which is generated in the development server.
But my transaction is attached to the program in the development server.If i transport the transaction
to production server,it is giving error since that program is not present in the production server.
Am i going in the right way......?
Is there any problem in my upload/download procedure ?
Is there any way to achieve my purpose ...............?
Please kindly reply me at the earliest.You have different ways to call a query using a t.code. One way is to create a pgm with the following code and attach a t-code to it.
data: gv_test type sy-repid.
DATA: GV_USERGROUP TYPE AQADEF-BGNAME VALUE 'FI',
GV_QUERY TYPE AQADEF-QUNAME VALUE 'ZCON_FI_QUERY',
GV_RNAME TYPE AQADEF-PGNAME .
CALL FUNCTION 'RSAQ_REPORT_NAME'
EXPORTING
WORKSPACE = ''
USERGROUP = GV_USERGROUP
QUERY = GV_QUERY
IMPORTING
REPORTNAME = GV_RNAME
* For the dynamic excution of the called query assisgn GV_RNAME to <gv_test>.
gv_test = GV_RNAME.
SUBMIT (gv_test) via selection-screen and return.
Alternate way is while creating T-Code you choose option Transaction with parameters.
Transaction as START_REPORT and in default values table control at bottom give as follows
D_SREPOVARI-REPORTTYPE = AQ
D_SREPOVARI-REPORT = User group
D_SREPOVARI-EXTDREPORT = Your Query name
Regards
Sathar -
How to copy a query from one infoprovider to another infoprovider
Hi Experts,
Could anyone suggest me on how to copy a particular query from one infoprovider to another infoprovider which are identical and have the same objects in them.
Thanx in advance
LalitHi Lalith,
Use the Transaction RSZC and specify the - > Source InfoCube -> Target InfoCube and select the queries you want to copy.
Hope it helps
Regards
Srikanth -
LOCAL Structure to be copied from one query to another query
Hello all,
In our query we have created a structure locally....
we have to copy the same locally created structure from one query to another query which is on the same multiprovider.
We do not want to make the structure global.
Can anyone suggest some method to achieve this!For copiying structures fom query to another you have to do it global. After that you can do click on right button on the structure when added to your query and choose "eliminate reference" this does further changes in the structure were local for that query.
-
Copying a Single BEx Query from One Infoprovider to Another
Is it possible to copy just a single query from one Infoprovider to another?
I know how to copy all of them at once, but I want to know if there is a way to do it just for a single query.Ah. That worked perfectly.
Awarding points.
Thank you. -
Copying a query from one cube to another cube
HI BW Gurus,
I am having a report due date for net payment analysis in Accounts receivables and i want to copy the same query into a different infocube accounts payable.
Is it posssible to copy a query from one infocube to another infocube.
Regards,
SyedHi,
Yes,it is possible to copy query from one infoprovider to another infoprovider with some conditions.Please have a look at the note 981104 which explains you how to Copy between InfoProviders and Copy within one InfoProvider.
Rgds
Manoj Kumar -
Copy one query from one infocube to another infocube
Hi BW Experts,
Hope all of them are doing good.How can we copy one query from one infocube to another infocube.
I have infocube1 having one query ,I NEED to copy that query to infocube2? How?
Could you please help me out?
ThanksUse transaction RSZC in BW (BTW you're addressing BW experts in a BO forum better post in the Bex section of the BW forum)
-
Transport sap query from one client to another client
Hi,
how to transport the sap query from one client to another client.
Moderator Message: Basic Question
Edited by: kishan P on Sep 15, 2010 3:39 PMuse report "RSAQR3TR"
Moderator Message: Do not answer such basic questions
Edited by: kishan P on Sep 15, 2010 3:44 PM -
Copy Query from One MultiProvider to Another
How easy is it to copy a Query from one MultiProvider to another?
thanksIf the elements of the query is not same try using following function module RSZ_I_COPY_QRY_TO_CUBE to copy queries
Re: Copying query structure to new infoprovider
Ravi -
Drill-through from 1 OLAP Cube to another.
Hi.Is it possible to drill-through from 1 OLAP Cube to another OLAP cube for AWM?Thanks!
Where are you in the process ?
If you don't have build the metadata for OLAP, do it first.
Here a beautiful example :
http://www.oracle.com/technology/obe/olap_biee/index.html
Once you can query your OLAP cube, create all the join in the physical layer for your ROLAP source.
Drag and drop the ROLAP fact measures on the measure of the OLAP cube
and add the ROLAP column dimension table to your OLAP dimension table.
At this point, you can then create the new ROLAP level in your dimension.
Just add the new ROLAP dimension column in the presentation layer and you're done.
The trick is that normally you don't have the same dimension column in your MOLAP and ROLAP environment.
In this way, OBIEE will choose the good dimensional schema (ROLAP or MOLAP).
Cheers
Nico
Edited by: gerardnico on Jul 29, 2009 3:25 PM Modify the trick with dimension column -
Copy File from One Location to Another Location through xcopy or any
Hi,
I Need to copy one file from one location to another location. That file need to save in C:\Windows\System32 folder
I need to create one .bat file and i want apply that bat as a startup script through GPO.
I tried through XCopy if i test in machine that is working. If i tried in other machine that is not working. becoz of some Credential issue
I tried in the script by netuse command after that my script itself not working.
SET username=XYZ\Administrator
SET password=abcd
@ECHO OFF
cmd "cd C:\"
net use "\\10.50.5.68\c$\Windows\System32" %password% /user:domain\%username%
:copy
Xcopy /S /I /E D:\DLL \\10.50.5.68\c$\Windows\System32
Regards, Hari Prasad.DYou cannot do that in a startup script. You do not need to do that in a startup script.
To add files to the system use GP Preferences.
On Window 7 and later only the Trussted Installer is allowed to add files. (That means only Microsoft.)
No programs or users should ever alter files in the system area.
¯\_(ツ)_/¯ -
How can I move someone's hair from one photo to another and place it on another person? I have gone through every instructional video you have and have not been able to master this
Open picture B, the one you wish to select the hair from to add to the picture.
Use one of the selection tools, e.g. selection brush, lasso tool, to select the hair. You will see an outline ("marching ants") once the selection is complete
Go to Edit menu>copy to copy the hair to the clipboard
Open picture A, then go to Edit>paste
Use the move tool to position the hair from picture B.
In the layers palette you should see picture A as the background layer, and the hair (B) on a separate layer.
Maybe you are looking for
-
How do I erase all my data securely before selling my IMac G5 computer
I will be selling my Imac G5 which was synced to my mobile me account. I know I can "unregister" the computer before selling but I want to make sure I securely erase my data for all the programs I have. I am selling the computer with Ilife and other
-
How to change a date to sunday prior to any date
Hi All, I have a requirement to change a date to sunday prior to any date. for example, If date is 6/30/08 , then i need to change it to 6/29/08. If date is 6/26/08, then i need to change it to 6/22/08. How to do the same. Regards, Neha
-
WARNING: Failed to validate the xml content
Hi, We notice this error when we start the web logic admin console and also in many of Hyperion log files. There are many instances of this error and everything is pointing to different lines in this file "jps-config.xml". WARNING: Failed to validate
-
Can't join CD tracks - no, not the usual problem
Help, This is NOT the problem where the tracks are out of order so the Join CD Tracks is grayed out. It's a different problem. I load audiobook CDs to play on my iPod - have been doing it for years. I join the tracks so that each CD is only one entry
-
It starts off looking normal, then as the page sets, it stretches out VERY WIDE...to the point where I cannot scroll, or see the entire page. I have uninstalled and reinstalled Firefox, and I have the same problem. Thank you!