Drill through report with parameters that user can change

Hi Team,
Need to provide user the ability to select the parameters in drill through report.
But even after changing parameters to different values and click view reports.Its getting reset to the parameter that being passed from main report.
Is there any way we can override these parameter values in drill through reports so that It can also work as normal report.
Thanks!

The user is interfacing with the main report so add the needed subreport parameters to both reports. In the main report, select the subreport > properties > Parameters. add the subreport parameters and set the value to the same parameter in the main
report by clicking expression builder (fx) and selecting the appropriate parameter.
"You will find a fortune, though it will not be the one you seek." -
Blind Seer, O Brother Where Art Thou
Please Mark posts as answers or helpful so that others may find the fortune they seek.

Similar Messages

Statistic report with figures that will not change when rerun months later

Hi,
Is there any good practices that we can follow to create statistic reports with figures that will not change even when rerun after few months later?
My scenario is my statistic report is generated based on data that is "alive" which means the record will get change after a period of time. So, if you generate the statistic report in for January 2006 in the month of January and regenerate in May for the January 2006 statistic, the figure is different. But what I want is to be able to get the same figures.
I know in this case looks like we need some sort of summary tables, so posting this to get advice on the best way to design such summary tables. Please comment if there is other ways of doing it.
Summary tables may work for statistic report, but how to support detail report listing where the records are required to be the same when it was generated few months ago.
Please advise.
Thank you.

What happens, when you execute a report today is the following: a select statement is fired at the data base and the result set is displayed in the report. The data can change after the moment you launched your report. What you could do to keep the result set the same, is implementing a user parameter that fills your date discriminator.

Drill Through Report With Essbase Studio

I have built a new minischema, cube / essbase model, and deployed to Essbase using Hyperion Studio 11.1.2.1. I created a drill-though report and was able to use the "test" feature to verify that the report returned data. The drill-through report type is relational and the association has been mode to my new cube. Restarted and confirmed the studio services were running correctly on the Essbase server. I have tried to drill-though using SmartView and AddIn, but recieve the message "No Drill Through Report at this Location". Cell styles are enabled and its not picking up my drill-through styles.
Pray tell what I should consider as my next move to troubleshoot?

Did not have the proper APS server connection selected during my testing. :D Once I connected SmartView to the proper APS server the application translated the drill-through report correctly.

Disable that user can change windows clock

hello,
does anyone know a method to disable that the user can
change the time of the windows clock.
I can change this setting with gpedit.msc
We want to distribute this setting with zenworks.
Snapshot do not work and in the C1 User Package -> User
Extensible Policies or Windows Grouppolicy i can find
a setting.
Best Regards
Timo Kratzsch

Here is very simple solution
zenworks Userpackage
Add Action
rename c:\winnt\system32\timedate.cpl timedate.cpl.old
Timo
> This might do it in a GroupPolicy
> Administrative Templates\Start Menu and Taskbar
> Remove access to the context menus for the taskbar
>
> Otherwise, I don't know.
>
> --
> Jared
> Novell Support Forums SysOp
> Systems Analyst with Data Technique, INC.
>
> It's not who you are, but what you are.!
> Using XanaNews 1.16.5.2
>
> Novell eDirectory Services 1.6 Billion users worldwide
> 81% 0f Fortune 500 use Novell's eDirectory
> Novell Desktop Management 40 Million users worldwide

My 2010 MacBook Pro started running slow a few days ago and is getting worse. I have run a report with EtreCheck that I can post. Can someone please help me figure out what's wrong and how to fix it. Thank you.

Problem started after I unintentionally downloaded some adware 4 days ago. After lots of aggressive ads slowed down my browser I downloaded and ran AdwareMedic which seemed to do the job and browser was back to normal. Then, possibly a coincidence, everything on the computer started running slower. I've backed up everything and have run a EtreCheck report.

When you have the problem, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Problem with EIS drill through reporting

Hello, Please help me with this. We are using Drill Through reports with EIS 7.1 and Essbase 7.1 in AIX environment. (These are the IBMDB2 Olap versions, not directly from Hyperion.) For some reports when retrieved on a member with more number of children, the Integration server gets killed and we get the following error ESSDTU {ESSNET MESSAGE} Network error [10054]: Cannot Send Data Following is the information in the server log file: [Thu Jul 13 4:39:04 PM 2006] /IS/Listener/0/Informational/1051001/Build-EIS71B168 Received client request Login [Thu Jul 13 4:39:04 PM 2006] /IS/Coordinator/0/Informational/0/Build-EIS71B168 Executed client request 'Login' in 0 seconds [Thu Jul 13 4:39:04 PM 2006] /IS/Worker/1152826749/Informational/0/Build-EIS71B168 Initialization completed, 'Worker' service is online. [Thu Jul 13 4:39:04 PM 2006] /IS/Worker/1152826749/Informational/0/Build-EIS71B168 Received client request Get Drill-Through report [Thu Jul 13 4:39:04 PM 2006] /IS//0x0/1152826749/Informational/0/Build-EIS71B168 Successfully loaded the OLAP Model 'OM1' [Thu Jul 13 4:39:05 PM 2006] /IS//0x0/0/Informational/1051034/Build-EIS71B168 EssbaseAPI: Logging in user [User1] [Thu Jul 13 4:39:05 PM 2006] /IS//0x0/0/Informational/1051035/Build-EIS71B168 EssbaseAPI: Last login on Thursday, July 13, 2006 4:24:33 PM [Thu Jul 13 4:39:06 PM 2006] /IS/Worker/1152826749/Informational/0/Build-EIS71B168 Executed client request 'Get Drill-Through report' in 2 seconds [Thu Jul 13 4:39:07 PM 2006] /IS/Worker/1152826749/Informational/0/Build-EIS71B168 Received client request Get Drill-Through report attributes [Thu Jul 13 4:39:07 PM 2006] /IS/Worker/1152826749/Informational/0/Build-EIS71B168 Executed client request 'Get Drill-Through report attributes' in 0 seconds [Thu Jul 13 4:39:07 PM 2006] /IS/Worker/1152826749/Informational/0/Build-EIS71B168 Received client request Get Drill-Through report data [Thu Jul 13 4:39:07 PM 2006] /IS/Worker/1152826749/Informational/0/Build-EIS71B168 Drill Through Report for Essbase Server:Server1.corp.com Application<img src="i/expressions/face-icon-small-happy.gif" border="0">T1 DB<img src="i/expressions/face-icon-small-happy.gif" border="0">B1 User:User1 [Thu Jul 13 16:39:16 2006] /IS/Server///Informational/0 Unknown flag [JDBC DSN] found, ignoring it/Build-EIS71B168 [Thu Jul 13 16:39:16 2006] /IS/Server///Informational/0 Found Q command line parameter and a value of 128 is set to it/Build-EIS71B168 [Thu Jul 13 16:39:16 2006] /IS/Server///Informational/0 Setting configuration variable, server home, to 'c:\ibm\db2olap\is'/Build-EIS71B168 [Thu Jul 13 16:39:16 2006] /IS/Server///Informational/0 Setting configuration variable, temporary directory, to 'C:\DOCUME~1\malkar\LOCALS~1\Temp'/Build-EIS71B168 [Thu Jul 13 16:39:16 2006] /IS/Server///Informational/0 Setting configuration variable, log file name, to 'c:\ibm\db2olap\is\log\olapisvr.log'/Build-EIS71B168 [Thu Jul 13 16:39:16 2006] /IS/Server///Informational/0 Setting configuration variable, Essbase message database, to 'C:\ibm\db2olap\bin\essbase.mdb'/Build-EIS71B168 [Thu Jul 13 16:39:17 2006] /IS/Coordinator/0/Critical/2002003/Build-EIS71B168 Invalid session identifier, please log in to Essbase Integration Services Server again. [Thu Jul 13 16:39:28 2006] /IS/Coordinator/0/Critical/2002003/Build-EIS71B168 Invalid session identifier, please log in to Essbase Integration Services Server again. Please let me know if this is something to do with the EIS limitations or some setting Thanks Kris

Normally if the drill through report fetches a wrong combination of members or huge amount of members than the way it was designed in the Drill through Report template. The database may fail due to improper query. Check the database and table status. Also fetch the report with proper combination of members.

Essbase Studio Drill-Through Report

Is it possible to run an Essbase Studio drill-through report in a SmartView spreadsheet that is connected to a cube that was not deployed by Essbase Studio? If so, how do you associate the drill-through report with the cube?

You have to trick Studio into thinking the cube was built from Studio. In my session on Advanced Studio Tips and Tricks at the KScope conference at the end of June I detail a couple of ways to do this. It is too detailed to put into a post here

More colors that user can pick

I am currenly useing skype with new UI(version 6.20.64.104)I would like to see more color in the UI that user can change by end user somehow, I would be happy even if that could be done by editing registry or some properties fileI would also like to be able to recolor people's chat bubble in conversacioncurrent and what i would like to see side by side

Heavily agree. I just updated to find this new color scheme annoying and even a bit of an eye strain. The light blues don't contrast enough to white to stand out and are just too close to white. I would personally prefer to go back to the plain text, along with the old contact list, as having everything so spaced out causes a lot of wasted space, which makes multitasking with two windows at once even more frustrating.

Passing different (multi-) values for parameters to drill-through report, based on clicked subtotal in main report

In Report Builder 3.0, I have made a main report in which the user can filter the underlying dataset using three parameters (all multi-value). The report shows totals grouped by these three parameters, as well as a grand total. What I want is to click
on a total, which then opens the drill-through report for the corresponding records. I have achieved this for the grand total; the action in the corresponding text box passes all selected values of the parameters to the drill-through report.
What I cannot figure out is how to make this work right when clicking on a subtotal. When I use the same expression as for the grand total, the same values for the parameters are passed, instead of the subset that apply to the corresponding text box in the
main report. I expected this to work, because Report Builder /does/ correctly calculate the SUMs for the different levels, even though the expressions are the same.
My question is: how do I pass different drill-through (multi-) values for parameters, corresponding to the respective subtotals in the main report?
(FYI: I am using Microsoft SQL Server 2008 R2 and Report Builder 3.0 .)

Hello Katherine,
Thanks once more for your quick reply.
I was aware of the textbox action "Go to report", and how to pass parameters in general. My question concerned how to determine the scope of the passed multi-value parameters (to the values that apply to the respective group/subtotal). The article you linked
to is informative, but not a solution to my problem.
A colleague of mine came up with a pragmatic solution: instead of trying to determine the scope of the parameter values, now I "look to the left in the results table". The two screenshots below should illustrate this. (Screenshots are in Dutch. Specific information
is pixelated.)
Unfortunately, I am not able to post images. Once my account is verified, I will edit them in. For now, I hope the text speaks for itself enough.
[Screenshot: Drill-through parameters - 01: Report Builder tablix with subtotals]
[Screenshot: Drill-through parameters - 02: Textbox properties (selected in screenshot 01) - Action - Go to report]
The first screenshot shows the tablix in the Report Builder. The second screenshot shows the properties of the textbox selected in the first.
Notice that I do not pass parameters for the first two columns, but the actual values. I only pass the parameter (containing /all/ user-selected values) for the third column. In the textbox below the selected one, I pass the actual values for the first column,
and parameters for the last two. In the textbox above the selected one, I pass the actual values for all three columns.
The only (cosmetic) flaw this approach has is that in the drill-through report, the list of selected parameters might show values that do not occur in the (corresponding part of the) results, and only for those parameters for which the main report passes (all
user-selected) parameter values, and not the actual values in the results. The results are correct, though.
If there is a way to directly determine the scope of multi-value parameters for passing to a drill-through report, I would still like know. But for now, this seems to work.

Drill Through Report Parameters from Graph Series Action

Hi
Using ReportBuilder 3
I need some help please on passing parameters to a Drill Through Report, when a user clicks on a bubble in a graph.
In context, I have a Tooltip that provides a count of the sysid field, which on mouse over gives the user the correct aggregate for the bubble they are looking at.
[Count(sys_id)]
So say I have a bubble that I am hovering over, showing a count of two sysid's, when I click the bubble I want to run a Drill Through report that uses sysid as a parameter. Therefore I want to pass through the two sysid's that the aggregate has identified.
Now if I go to the action tab and select 'Go to report', select my report and add a Parameter, I need an expression that retrieves the sysid's for the parameters.
At the moment I am using the following expression:
=Split(Join(LookupSet(1,1,Fields!sys_id.Value,"ProjectMaster"),","),",")
This provides the correct string format for the multi value parameter that I have on my report. The problem is, it passes all the sysid's actively displayed on the entire graph and not just the two that the aggregate has identified in the Tooltip.
Question - Is there a way of building the expression to lookup the two sisid's relevant to the bubble I am interested in, rather than the dataset for the whole graph?
Many Thank
Andy

Hi Tim
The report has two parameters Based on Group Type and then Sub Group Type.
The expression I am using for the drill through parameters is =Split(Join(Fields!sys_id.Value,","),",")
Below is a subset of the dataset with relevant fields and sample values.
Group Type
Group Subtype
sys id
Total Workload
External Cost
Change Impact
GDC
GDC BI
2b8ccf64acafb00019bee02a7c7737cb
244
233480
Medium
GDC
GDC BI
6cdd24bfc8255100403385902e6cbb9a
351
121000
Low
GDC
GDC Dev.
6a518a1d38551140fbac4555180015ba
0
0
Medium
GDC
GDC PM
b47d1defff6c70c0a2ad8ffb97649d4e
110
27120
Medium
GDC
GDC PM
aba1fde1c82a5140403385902e6cbb5f
126
148400
Low
GDC
GDC PM
6b80ecafff2830c0a2ad8ffb97649dc8
0
0
Undefined
GDC
GDC SAM
59cc2749d8ae4900c950258abb887f8e
20
80906
Low
GDC
GDC SDC
442b09f5184f3440f0d833076f82fbff
0
2096
High
GDC
GDC SDC
f77c1f5c8cdf7c04048a0b130104c548
493
0
High
GDC
GDC SDC
bd3fe0753c138d404033c194bf5ae9e9
0
0
Very High
GDC
GDC Siebel
cb35a17d55419d008cb3130c2c9ae23d
0
0
Medium
Just to note! the copy and paste has not included underscores in column names!:-)

Can't access drill through report from add-in

I've created a drill through report via Essbase Studio. I tested it within the Studio application and then associated it with a model. To be extra sure, I even deployed the members to the outline and reloaded data to the cube. However, when I double click a data cell in the Excel add-in, I do not see the linked object drill through report. I've made sure the linked objects check box is marked under options (in the add-in). I've got full Essbase rights to the cube and I am a cpAdmin in Studio (though I even added cpViewer, just to be sure). Anything I could be doing wrong, or is there a setting I'm missing somewhere?
I appreciate any help.
Thanks,
Matt

Yeah, its an older version of the add-in, 7.1.2. I've poked support to see if it is possible to drill through from that version to a drill through report created in Studio 11.1.1.3--my client has quite a few users using older versions of excel due to legacy apps. They will have smart view installed, but its not up and running yet, so I can't test it with that.
Thanks,
Matt

Issue with Drill Through Reports in Essbase Studio.

Hi,
we are using essbase studio to drill through to the source table in Oracle.In drill through definition the query is like , select * from source where (Project IN ($$PROJECTS-VALUE$$)). Project column is located in source table and PROJECTS-VALUES are located in Essbase under project dimension and we will select the values in smart view. we are using smart view to check drill through reports.In smart view, If i select one member at gen-2 level which contains 1450 level-0 members,It is saying as error in executing the report in line 1972. Is there any limitation with IN condition , such that oracle takes only limited values like count of 999.we are facing issue only at gen-2 of project and it is working good from gen-3.
Please let me know is there any kind of certain limitation.

It is possible you are overloading the parser. If the projects table/view is a recursive join, when Studio creates the $$Project-value$$ is actaully returns all the level zero members under the member selected(at least in 11.1.2.X. If the list is huge, it might have problems. I would open an SR to see if there is a limit. It might be number of characters or values

Error with Downloaded Excel Drill Through Report

Hello! Please help!
I am having problem with the excel downloaded drill through report. Downloading the report is ok, but when I open the downloaded report, it always have this error:
View Display Error
Error generating view. Error getting cursor in GenerateHead
Error Details
Error Codes: OAMP2OPY:EHWH2A7E
A numeric value was expected (received "0").
The parent report is ok. No such error is being encountered whenever I tried to open downloaded parent report.
I am using OBIEE 10.1.3.4.1 version.
Regards,
MJ
Edited by: user13803157 on Oct 12, 2011 7:34 PM
Edited by: user13803157 on Oct 12, 2011 7:34 PM

This is a known bug. Here are the Metalink details:
Cause
This is due to bug 8394579 - Numeric Input Results in Non-Numeric Error.
Solution
Download and apply patch 9492821. This includes a fix for bug 8394579, even though it is not listed in the readme as being included.
Note that the patch is password protected. Contact Oracle Support for a password.
An alternative solution is to upgrade to OBIEE 11g.
If this was helpful, please mark the response as correct.

Problem with a table that user can add rows to

I have a form that has a table with header. I have included a button that users can click to add rows to the table. I have gotten a few forms back where for some reason the header row has been repeated. I haven't been able to recreate this on my end and my users can't identify exactly what they are doing to get those extra header rows. I have included screen shots of the problem pages here. I would love to upload the form since I believe my issue is with the script, but can't seem to do that. I'm signed in to adobe.com, but when I go to new and documents and upload a file, everything is greyed out. Am I missing something that would enable me to upload the document? Specific instructions would be appreciated.
Thanks!

Hi,
For both/all tables the HeaderRow should not be set to repeat (see the Object > Binding palette). Go to the HeaderRow in the hierarchy (for each table) and untick the "Repeat Row.."
That should solve the problem.
Niall

EIS - Fact Tables, Drill Through Reports & User Defined SQL

I have built a model using two factables. (Virtually one table as the two are combined in the OLAP Model.) I then built my metaoutline and I have specified an ASO cube. I built the cube and the drill through reports and then tried to load the cube.
Intially the standard SQL generated no records. I tweeked it a bit and it then loaded. However, once I tweeked the SQL I could not get any drill through reports.
Does anyone know how the SQL for the drill through reports is populated? Does it run off the user defined SQL?

I've figured it out. FYI to those curious.
The SQL for the drill through reports are specified on how the model is set up. The User Defined SQL is only for the data load.

Drill through report with parameters that user can change

Similar Messages

Maybe you are looking for