Drill to detail should come with our own report format....

deptno          empcount
          Q1-07          Q2-07          Q3-07          Q4-07
     10     245          267          134          98
     20     328          898          211          88deptno is from test_1(total of 34 colums) table
empcount is from test_2(total of 12 columns) table
Q1-07,Q2-07... from time_1 (total of 37 columns)table.
when i am going for drill to detail on deptno(20), its going to display all the 34+12+37 columns.
but i don't want all these columns.i need to display few columns from test_1 table only.
how to achieve that in Oracle Discoverer Plus 10.1.2.48.18?

Hi
Don't drill to detail. That is the old way of drilling and has the behavior you describe. What you need to do is hyper drill to a second workbook or worksheet from deptno.
The second worksheet will be pre-defined and can either be in the same workbook or in a second workbook, Discoverer does not care either way. With both worksheets existing you right-click in the deptno cell and from the pop-up select the option to create the link. It's the last one in the last.
For anyone reading this, please be aware that you can only create hyper links in Discoverer Plus 10g R2, and work in both Viewer and Desktop.
Best wishes
Michael

Similar Messages

Can we enhance the Sender SOAP Adapter with our own modules?

Hi All,
Can we enhance the Sender SOAP Adapter with our own modules on the Module Tab Page in the Module Processor?
I believe the answer is no. However, whatever may be the answer, I would like to know that is there any specific reason for that.
Please help me in this regard.
Thanks,
Yogi.

Hi,
I think, we are mentioning the URL of the adapter channel directly in the configuration. SO there is no place we can customize this flow..just a thought
Because in the file adapter etc, After Adapter Engine picks up the data and before it goes into integration engine module is processed..
http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/5ad93f130f9215e10000000a155106/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f013e82c-e56e-2910-c3ae-c602a67b918e
Rgds,
Moorthy

HT1473 My girlfriend and I both have iTunes account with our own music libraries and we want to combine our two libraries into one icloude accounts so can both then access our one shared libary at anytime in the cloud. How do we do this?

My girlfriend and I both have iTunes account with our own music libraries and we want to combine our two libraries into one icloude accounts so can both then access our one shared libary at anytime in the cloud. How do we do this?

No it is not possible. Content purchased from the iTunes Store is permanently tied to the account from which it was originally purchased, and Apple does not provide a way to change it.

Why does the itunes wifi show it is connected to my PC for all the devices we have when my husband has his own Apple ID, since we updated to Icloud with our own ID's

since upgrading to Icloud, all the devices in our house show in Itunes Wifi they are all linked to my PC, although we have set them up with our own individual accounts, my husband is unable to sync his Iphone, Ipod & ipad to the music in his itunes, as it wants to connect to mine any one any ideas

You can continue to use the current AppleID for iTunes, but your husband can create a new AppleID to use to create a new iCloud account that will be his own and not overlap with yours. If you do not have another email address to use for an AppleID, just get a free Gmail account and use that.
You can have as many AppleIDs as you want (or at least, as many as you have email addresses for). You can use a separate AppleID for the store, another for iCloud, and even another for iMessage if you wish.
You will want to keep the current one as the shared one for the store as all your previous purchases are permanently tied to it, and thus you need that AppleID to update or redownload your current purchased content.

I got my new macbook pro 2012 but there's no idvd it should come with ilife but i didn't found it how could i install it

i got my new macbook pro os x version 10.7.4 processor 2.4 GHz Memory 4 GB 1333 MHz DDR3 2012 but there's no idvd it should come with ilife but i didn't found it how could i install it thanks

Apple no longer distributes iDVD.
1) Buy an old iLife from a place such as e-bay or Amazon. Make sure it is a version that has iDVD. Do not buy it from Apple since their version no longer has iDVD.
2) Try a third party application (none really have the features of iDVD though).
Burn (free) - http://burn-osx.sourceforge.net/Pages/English/home.html - includes basic DVD authoring but you will definitely have to read the documentation.
Easily Burn Movies to a DVD without Apple's iDVD. - http://www.creativetechs.com/iq/easily_burn_movies_to_a_dvd_without_apples_idvd. html - directions for using Burn to make a TV DVD. Note, Burn also has a separate application which lets you do more fancy menus.
Toast
Others.
Commentary on DVDs by Klaus1 - https://discussions.apple.com/message/18338996

I have a new MacBook Air 11'inch and I presume that it should come with the iLife programs. However, when I signed into the appstore with my account I have used with all of my Mac products, it now said I had to purchase each program, like iPhoto seperate

I have a new MacBook Air 11'inch and I presume that it should come with the iLife programs. However, when I signed into the appstore with my account I have used with all of my Mac products, it now said I had to purchase each program, like iPhoto, iMovie, ect. seperate. I have already logged in and out of my account and called the "free" part of tech support. How can I reslove this issue?

Welcome to Apple Support Communities
If you really have a new MacBook, iPhoto, iMovie and GarageBand come with the Mac for free.
As you see their price at the Mac App Store, it's clear that there's a problem with your MacBook. Simply return it if you purchased it less than 14 days ago and you will receive a new MacBook

I bought a macbook pro in august 8, should come with OS X Lion??

I bought a macbook pro in august 8, should come with OS X Lion??

Lion Up-To-Date upgrade
"The Mac OS X Lion Up-To-Date upgrade is available at no additional charge via the Mac App Store to all customers who purchased a qualifying new Mac system from Apple or an Apple Authorized Reseller on or after June 6, 2011. Users must request their Up-To-Date upgrade within 30 days of purchase of their Mac computer. Customers who purchase a qualifying Mac between June 6, 2011 and the date when Lion is available in the Mac App Store will have 30 days from Lion’s official release date to make a request." See below:
OS X Lion - Get up to date

Does the Cisco WRVS4400N come with its own VPN Software?

I would like to install the Cisco WRVS4400N in a small business. The specs on the router says it will work with nearly any VPN client. But does it come with its own VPN software? Is there a free VPN software that is recommended? The business has no VPN software currently. Thanks...

Hi ,
since this question is about a product in the Cisco Small Business / Linksys range, I suggest you move it to the community, where you will have a better chance of getting expert advice.
best regards,
Herbert
Cisco Moderator

How do I create a new Sharepoint site at Home to connect with our own Website?

How do I connect our website with our home computer.
I am not linked with a company server site - just what has been created with the website, so how do I connect to a server or that server; know the server details and how can I link my Sharepoint with my website.

Your question has not answered mine.
Please respond to my next question as posted 1 March 2015 and re-posted:
I have created a website - purchased a domain name and have started to build my own website for public viewing.
I use Sharepoint at work so I am familiar in using webpages and creating them. I have Sharepoint 2010 & office 365 at home and would like to be able to use Sharepoint to manage and create new pages on my website as I am finding that it would be easier
to manage the website as I am familiar with using Sharepoint.
I have not completed any formal IT training and therefore don't know how to create the link between my website and Sharepoint on my private PC.
I have read pages and watched videos and they reference back to 'your IT department will create the link for you' - as this is for my private PC, I don't have an IT department to create this for me, I have to do this myself.
Are you able to direct me to a refer point on how to create the link please?

Design 1313 with our own function

We are planning to design our own Terminal block for SCXI-1125 with attenuator and with AC coupling circuit
(both selectable). How can we get information to design this block?
OR can any one send how SCXI-1313 works when you want to select the attenuator on/off automatically
when a high range is selected?
Rg
Naushica

Hi Naushica
Unfortunately circuit sheets are not made available by National Instruments and therefore you will be unable to get information on how to design your custom terminal block. However there are custom kits available and you can view more information at this link:
http://digital.ni.com/manuals.nsf/websearch/6B39E29F2EE4AD4E86256E35006C4240
Hope you will find this useful
Kind Regards
YatinM
National Instruments

Creating a Script to Replace Supplied Swatches with Our Own...

We have a client that provides us art with their own swatches. We in turn have to load the corresponding swatch from our library for that client and merge. Would there be a way to script this?
They are not named the same but usually part of the name is the same. For instance, a supplied swatch is called 'White_S06_001A_white' and we replace it with 'WHITE_we_rgb'... or 'Red_SLD_A1MH_186' is replaced by '186_RED_we_rgb'
Wondering if this might be possible. Thanks.

I think it's possible (although it's beyond my scripting prowess) but
... usually part of the name is the same ...
usually is not going to work. Only if you have one of these:
a list of all usual name differences (and all of them)
or, an exact list of all of your clients' names and yours.
then a script can do it.
For (1), it needs the differences to discard and replace the bad name bits with the good stuff. For example, the "_we_" can be added right after the first underscore, and eh (thinking about your 2nd example ...), well, something like "if there is a number at the end place it at the start and replace the word before the first underscore with capitals and throw everything else away and add "_we_rgb" to the result" -- you get the idea. Is there any rule to this at all?
For (2), it just requires a simple "a -> b" translation list.
By the way: how do you know it's safe to change the name? Are the RGB values of your and their swatches identical?

When we execute transcation selection-screen should come with some values

hi gurus,
My requirement is whenever user executes a particular transaction,
selection screen should appear with some values by default.
can you suggest me in solving this problem.
its urgent.
thanks,
Bhanu.R

Hi,
for that do like:
A transaction with a variant can have its own transaction code, which you can then use to execute the transaction with the appropriate variant.
To create a variant transaction, proceed as follows:
Choose Goto ® Create vari. trans. from the initial transaction variant maintenance screen.
Enter a transaction name and corresponding short text. Transaction type Variant transaction is already set. The following screen already contains default values for the name of the calling transaction, the variant name, and the client-specific or cross-client variant checkbox.
Save your entries.
Example:
Variant ABC has been defined for transaction Z000. We now want to create the variant transaction ZVAR.
Name of the new transaction: ZVAR
Name of the calling transaction: Z000
Name of the variant: ABC
Transaction ZVAR starts transaction Z000 with variant ABC.
If the variant specified for a variant transaction does not exist (in the current client), then the calling transaction will be started without variant.
Regards,
Renjith Michael.

Does the ipod 5 16GB come with its own power cord

do i have to buy extra accesories for mt new ipod 5 16gb

A new one will come with a USB cord and ear buds, after that-- you're on your own! Good luck

Attaching Our own report

Hi,
I need a help in creating report.
The situation is when we click the print button when the Picklist windows is there a default report appears with the contents. I want to create my own query and based on that want to create report which should be printed as the default one. How can I do this. I saw there is an option of PickList_New but then how to attach our own query to it.
Thanks in advance.
With Regards,
Ram.

Hi Louis,
Thanx for your reply.
Since I am very new to Business One I would require more assistance from you.
The following is the query for which I want to design a report and get it printed whenever the user clicks the print or print preview button during PickList screen (formid = 85).
<b>SELECT T0.DocEntry, T0.DocNum, T1.CardCode, T1.CardName, T0.DocDate, T0.ReqDate, T2.ShipDate, T0.CancelDate,
T1.Priority, T3.ItemCode, T3.WhsCode, T2.Dscription, T2.Quantity, T2.PickOty, T2.OpenQty, T3.OnHand / T5.NumInSale,
T2.PickStatus, T2.PickIdNo, T2.LineNum, T0.PartSupply, T2.BackOrdr, T2.ReleasQtty, T4.WhsName, T2.LineNum,T1.U_BEATDESC, T1.U_DELSEQNO
FROM [dbo].[ORDR] T0 INNER JOIN [dbo].[OCRD] T1 ON T1.CardCode = T0.CardCode INNER JOIN [dbo].[RDR1] T2 ON T2.DocEntry = T0.DocEntry
INNER JOIN [dbo].[OITW] T3 ON T2.ItemCode = T3.ItemCode AND T2.WhsCode = T3.WhsCode INNER JOIN [dbo].[OWHS] T4 ON T4.WhsCode = T2.WhsCode
INNER JOIN [dbo].[OITM] T5 ON T5.ItemCode = T2.ItemCode ORDER BY T1.U_BEATNO, T1.U_DELSEQNO DESC</b>
Now please guide me how to go about. I right click the query and clicked Create Report. I can see that report now in PLD. After this when I go to picklist screen and click the PLD button I am not able to attach this newly created report rather I am unable to this newly created report anywhere in that stage. How to do this. You where suggesting some code related handling. How should I be doing that. Please give some rough code logic. I know basic UI & DI connections and event handlings.
Another thing related to PLD, how to define groups and print something like groupwise total etc... When I add a new field using the database field control, how to attach it with a table. I tried assigning with a table and field but then its not synchronizing with the current row related data, its always picking up the first one in that table.
There is one more variation also required for me which will be a report based on Itemwise total qty report which would be required by another set of clients. This I will manage once you give me the basic idea in the above case.
Thanx in advance.
With Regards,
Ram.

Integration of JTwain with our own interface??????HELP!!!

hi....
i have this one program which is an interface of my system...and now i'm about to add the function of scanning(i'm using JTwain to do the function...)but the problem is i'm having trouble to integrate the interface with JTwain can anyone help me out on this......here is my coding of interface and the jtwain coding......
// ToolBarExample.java
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.border.*;
import javax.swing.event.*;
import java.awt.GridLayout;
import java.awt.event.WindowAdapter;
import java.awt.event.WindowEvent;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.JFrame;
import javax.swing.ImageIcon;
public class ToolBarExample extends JPanel {
    public JTextPane pane;
    public JMenuBar menuBar;
    public JToolBar toolBar;
    public ToolBarExample( ) {
          super(new GridLayout(1,1)); // 1 rows, 2 column
          JLabel label1, label2;
          //ImageIcon icon = createImageIcon("images/middles.gif",
                                                   //"a pretty but meaningless splat");
                  //Create the first label.
                  label1 = new JLabel("Image and Text",JLabel.CENTER);
                  label1.setIcon(new ImageIcon("full/copy.png"));
                  //Set the position of its text, relative to its icon:
                  label1.setVerticalTextPosition(JLabel.BOTTOM);
                  label1.setHorizontalTextPosition(JLabel.CENTER);
                  //Create the other labels.
        label2 = new JLabel("Text-Only Label");
         //Create tool tips, for the heck of it.
                  label1.setToolTipText("A label containing both image and text");
        label2.setToolTipText("A label containing only text");
         //Add the labels.
          add(label1);
        add(label2);
        menuBar = new JMenuBar( );
        // Create a set of actions to use in both the menu and toolbar.
        DemoAction leftJustifyAction = new DemoAction("Scan",
            new ImageIcon("open.png"), "Scan text", 'L');
        DemoAction rightJustifyAction = new DemoAction("Recognize",
            new ImageIcon("new.png"), "Recognize text", 'R');
       JMenu formatMenu = new JMenu("Scan");
       formatMenu.add(leftJustifyAction);
       formatMenu.add(rightJustifyAction);
          JMenu fileMenu = new JMenu("File");
          menuBar.add(fileMenu);
       menuBar.add(formatMenu);
          JMenu helpMenu = new JMenu("Help");
          menuBar.add(helpMenu);
JMenuItem jmiNew, jmiOpen;
fileMenu.add(jmiNew = new JMenuItem("New"));
fileMenu.add(jmiOpen = new JMenuItem("Open"));
jmiNew.setIcon(new ImageIcon("full/new.png"));
jmiOpen.setIcon(new ImageIcon("full/open.png"));
fileMenu.add(new JMenuItem("Save"));
fileMenu.add(new JMenuItem ("Save As"));
fileMenu.add (new JMenuItem("Print"));
fileMenu.addSeparator();
fileMenu.add(new JMenuItem ("Exit"));
helpMenu.add(new JMenuItem ("Help Topics"));
       toolBar = new JToolBar("Formatting");
       toolBar.add(leftJustifyAction);
       toolBar.add(rightJustifyAction);
       toolBar.addSeparator( );
// Disable one of the Actions.
      leftJustifyAction.setEnabled(true);
/** Returns an ImageIcon, or null if the path was invalid.
    protected static ImageIcon createImageIcon(String path,
                                               String description) {
        java.net.URL imgURL = LabelDemo.class.getResource(path);
        if (imgURL != null) {
            return new ImageIcon(imgURL, description);
        } else {
            System.err.println("Couldn't find file: " + path);
            return null;
    public static void main(String s[ ]) {
        ToolBarExample example = new ToolBarExample( );
        example.pane = new JTextPane( );
        example.pane.setPreferredSize(new Dimension(500, 800));
        example.pane.setBorder(new BevelBorder(BevelBorder.LOWERED));
        example.toolBar.setMaximumSize(example.toolBar.getSize( ));
        JFrame frame = new JFrame("Menu example");
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.setJMenuBar(example.menuBar);
        JMenuBar jmb = new JMenuBar();
         //LabelDemo newContentPane = new LabelDemo();
         //frame.setContentPane(newContentPane);
         //newContentPane.setOpaque(false); //content panes must be opaque
        frame.getContentPane( ).add(example.toolBar, BorderLayout.NORTH);
        frame.getContentPane( ).add(example.pane, BorderLayout.CENTER);
        frame.pack( );
        frame.setVisible(true);
        //Schedule a job for the event-dispatching thread:
                  //creating and showing this application's GUI.
                  javax.swing.SwingUtilities.invokeLater(new Runnable() {
                      public void run() {
    class DemoAction extends AbstractAction {
        public DemoAction(String text, Icon icon, String description,
                          char accelerator) {
            super(text, icon);
            putValue(ACCELERATOR_KEY, KeyStroke.getKeyStroke(accelerator,
                     Toolkit.getDefaultToolkit( ).getMenuShortcutKeyMask( )));
            putValue(SHORT_DESCRIPTION, description);
        public void actionPerformed(ActionEvent e) {
            try { pane.getStyledDocument( ).insertString(0,
                  "Action [" + getValue(NAME) + "] performed!\n", null);
            } catch (Exception ex) { ex.printStackTrace( ); }
import java.awt.Image;
import com.asprise.util.jtwain.Source;
import com.asprise.util.jtwain.SourceManager;
* $Id$
public class DemoSimple extends JTwainDemoCode{
     public DemoSimple() {
          try {
               Source source = SourceManager.instance().getDefaultSource();
               if(source == null) {
                    error("There is no (default) source on the system!");
                    return;
               source.open();
               Image image = source.acquireImage();
               new ImageDisplayer("DemoSimple", image);
               source.close();
          }catch(Exception e) {
               exception(e);
          }finally{
               SourceManager.closeSourceManager();
     public static void main(String[] args) {
          new DemoSimple();
}

my problem is that i have my own coding of my
interface and i also have coding of JTwain
coding...but the problem is that whenever i combine
this 2 coding i always get so many errors...what can
i do with this problem?could pleaze take a look at my
coding and tell me how to combine this 2 coding....so
that i will be integrated....This is a little more helpful but still vague as all get out.
Please post an example of some of the errors you are getting because right now it could be any of the following
- you haven't installed Java
- you have some syntax problems
- you are inventing method for the JTWain stuff that don't exist
- you have a class path problem
My money is on 3 and 4.

Drill to detail should come with our own report format....

Similar Messages

Maybe you are looking for