"Drill-to-Detail" to remote RDBMS

I've seen that its possible to drill from OLAP AW's down into transactional source data from within a 10g database.
Is it possible to feed an AW data from a remote transactional system, and allow "Drill-to-Detail" from the AW on one server to a remote transactional system on another server?
Not really after specifics on how this might actually be implemented, just curious to know if its feasible or not.

Hi there,
I think this is possible.
I've not tested it but it should be possible using a DB Link.
Thanks
Stuart
PS. Drop me an email if you want more detail

Similar Messages

Does SAP have any WBS report able to drill downdown detail to PO level

Hi Expert,
Would like to seek for your advise as below:
a) Does SAP have any WBS report able to drill downdown detail to PO level for the assign cost?
What is the T-code?
b) What is the table contain WBS information with related PO level for the assign cost?
Please help.
Regards,
KH

Hi,
a) Try CJI5 as menioned by Gokul.
b) Try a query combining EKKN, EKPO and PRPS (if you need any other WBS detail).
regards
Sreekanth

Drill To Detail

I am trying to create a report with deill to detail functionality. I have got main report showing payments of customer and i want user to click on the account number field to open the details about the account. I have got 2 reports already defined. Now from the first report i am trying to create Drill to Detail in another Sheet. I dont see other report folder in the 'Where do you want to drill to?" Option. Please help me what i need to do to make the account detail report visible under the Drill to detail option.
Thanks

Use a common key between this two folders to define a drill to detail item class in discoverer administrator. The second sheet will apear in the drill to detail dialog box.
Thanks.

Discoverer viewer in portal or Drill to detail in Disco report in Portal

Hi
Is it possible to embed discoverer viewer into Portal page. I know one way, I can achieve this in older versions by using <IFRAME src="worksheet url"></iframe> as HTML portlet. But, the problem here is that, our Discoverer viewer is SSO protected. So,I don't want user to single sign on again, as they have already have done that when they got into portal.
My second question is , I have developed Page-Detail report in Disco plus, also I have Drill to Detail in the same report. Drill to Detail is created using "Manage Link" option. When I deploy this report into Portal using Disco Portlet provider, firstly in portal it is not showing the Page Item, also the Drill through link also is not showing.
Any help on the above questions would be greatly helpful.
Thanks
Balaji

Hi
Firstly thank you very much for your response.
The Disco report I have is a Discoverer Plus report with Drill to Detail to another workbook(developed through manage link). But this Drillable link is not showing in the published Disco portlet. Are you saying that it should in the published disco portlet? .. As posted in previous response , I know this would work from Analyze link(which basically lauches viewer)..
But users would like to see this drillable link in the report in portal page itself(which means on the published portlet itself). To achieve this only, I used Iframes in Html portlet and showing the Discoverer viewer url. It works fine, but only thing is each time user naviges to portal page, it executes the report which takes some time. I am trying to avoid the execution process. I think one solution is I can just schdule these Disco reports and that way it will not query the database each time. I was wondering if there is any other solution maybe I am missing
Thanks
Balaji

PowerPivot 2013 | Drill to Details returns all rows

When double-clicking on a measure, or a value within a powerpivot pivot table, the drill to details sheet returns all the rows in the dataset.
Is this normal behavior? Is there a workaround for this?
Thank you!

The drillthrough should respect all filter context in the pivot table, thus it should only be returning those values that make up the subset determined by the table filters, slicers, and whichever field labels make up the row and column filters.
Any filtering logic you have written into the measures themselves will not be maintained for the drillthrough.

Drill to Detail - Oracle Discoverer

Hi All
I am working on Discoverer Report.I am trying to set up the drill to detail option to my report.I am using two custom folders. When i create the Item class,i select the check box list of values and Drill to Detail option. While selecting the items, I have selected the items from my second folder in the Item Class to Drill in another sheet.
In the Desktop Edition, when i right click and say drill on another sheet, The sheet is Empty after completion. Please let me know am i missing some thing..
Let me know the setup of drill to detail
Thanx

Hi
You'll probably get a better response to this question in the Discoverer forum.
Cheers
MF

Drill to Detail - Discoverer Viewer

I created a worksheet using discoverer plus with drill to detail option. It works fine in discoverer plus. But i don't know how to use this in discoverer viewer. Anyone knows how 'Drill to Detail' option can be used in Viewer?
I am using discoverer 10g (10.1.2)
Thanks

While regular drills and drill to URL links and worksheet links are all available in Viewer, drill-to-detail is not yet available in Viewer.
Thanks
Abhinav
Oracle Business Intelligence Product Management
BI on Oracle: http://www.oracle.com/bi/
BI on OTN : http://www.oracle.com/technology/products/bi/
Discoverer : http://www.oracle.com/technology/products/discoverer/
BI Software : http://www.oracle.com/technology/software/products/ias/devuse.html
Documentation: http://www.oracle.com/technology/documentation/appserver1012.html
BI Samples : http://www.oracle.com/technology/products/bi/samples/
Blog : http://oraclebi.blogspot.com/

Is it possible to programatically drill to detail for an instance

Hi Gurus,
In my BOM I have Container model item at the top and an instantiable BOM model item underneath it. All the user entered UI elements are for the instatiable model. Through a CX rule I automatically add an instance for the BOM Model to the container. Is it possible to drill to detail via a cx rule for the newly created instance so that user goes directly to the UI of the BOM Model.
Thanks in advance
Arun

Is it possible to have the user click a button to instantiate the model instead? You can have a button that does "Instantiate and Navigate" in the same operation. At a prior client, we could potentially instantiate one of 8 lower-level models. In our UI, we create 8 different buttons. Each of these buttons were added to either a Content Switcher or UI Display Condition (either should work). When the user made a selection from within the model, only ONE of the EIGHT buttons appeared. Each button had the same caption. From the user perspective, it appears that only a single button is ever selected. In reality, the UI is switching between the eight.
If your scenario is that the lower level model is instantiated immediately, is it possible to use a Page Include region? It has been a bit since I used this UI element, so it is possible that it is not applicable to "optionally instantiable" models (I do know that Page Include Region works for Single Mandatory Instances). In this case, you can directly reference the UI for the lower-level model within your top-level model.
Thanks,
Jason

Help!!!!!!!!!!!!! Drill to details info

There are two worksheet which data derives from two database views. The first
workbook1 contains summary details while the other workbook2 contains breakdown
information with hierarchy structure in the workbook2.
Basically my questions:
1) Can you use drill to details (From workbook1/worksheet into workbook2/worksheet )
2) Will i be able to see the hierarchy structures in workbook 2/worksheet
3) How do you use values from the summary workbook/worksheet as a default parameter to run
the details workbook/worksheet

texassphinx wrote:
My Satellite p105-s6024 recently got damaged from a leaky roof during a rain storm. I need to get the information from the hard drive to the new Satellite L355-7902. I've seen some HDD to USB adapters on Ebay but not sure which one fits that hard drive. It's a Toshiba HDD2D30 100GB 5400rpm SATA 9.5mm. It has a 7 +15 pin connector. Thanks for any help.
Message Edited by texassphinx on 02-16-2009 07:46 AM
You need an enclosure/adapter that acccpts a SATA drive and has a USB 2.0 interface to the host computer. There are plenty of them available. I do business with NewEgg, so here's a link to some they sell, but I'm not trying to drum up any business for them.
http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=2010090092+1053807124+1054107131&Configu...

Drill to detail should come with our own report format....

deptno          empcount
          Q1-07          Q2-07          Q3-07          Q4-07
     10     245          267          134          98
     20     328          898          211          88deptno is from test_1(total of 34 colums) table
empcount is from test_2(total of 12 columns) table
Q1-07,Q2-07... from time_1 (total of 37 columns)table.
when i am going for drill to detail on deptno(20), its going to display all the 34+12+37 columns.
but i don't want all these columns.i need to display few columns from test_1 table only.
how to achieve that in Oracle Discoverer Plus 10.1.2.48.18?

Hi
Don't drill to detail. That is the old way of drilling and has the behavior you describe. What you need to do is hyper drill to a second workbook or worksheet from deptno.
The second worksheet will be pre-defined and can either be in the same workbook or in a second workbook, Discoverer does not care either way. With both worksheets existing you right-click in the deptno cell and from the pop-up select the option to create the link. It's the last one in the last.
For anyone reading this, please be aware that you can only create hyper links in Discoverer Plus 10g R2, and work in both Viewer and Desktop.
Best wishes
Michael

Drill to Detail - Discoverer Plus Olap

Does anybody knows how can I do "Drill to Detail" in the OLAP Option?
I am using Discoverer Plus Olap to query a cube but I need to go to the relational data from a cell of this cube
Thanks

Hi There:
If you had figured it out, please let me know.
Regards
Rufus

How to go to a particular object in drill down detail pdf report?

In drill down html reports I could directly go to a particular object in the detail report from the summary report by using hyperlink destination property in the detail report and hyperlink property in the summary report.
How can I do the same thing in drill down pdf reports? The summary pdf report is opened first and then clicking on any of the object in summary pdf report should direct me to the same object in detail report.
Thanks for your help.
-Jayshree

Unfortunately PDF doesn't support this concept. You could ensure that the detail report has bookmarks, then the user can easily see the different sections of the report.
Hope this helps,
Danny

OBIEE 11g: Build a drill down detail on the count of records

Hello:
I have a summary report based on certain criteria shows the count of certain number of records for example, count(sales_id).
Region (North), Product Category(ABC) -> 15 (Sales record count using count(sales_id))
I want the ability to provide another detail report which will be the drill down of 15 that shows 15 sales records in detail.
The detail report will be invoked using the Action Link which has the BI navigation from the Measure Column (that has 15) to pass the list of sales_id's as the prompted filter based on the analysis results from the summary report.
Any idea on what I need to do in the summary report to pass the list of sales id's instead of the count 15? I do not want to display the sales_id's in the summary report.
Thanks
Sankar

589151 wrote:
Hello:
I have a summary report based on certain criteria shows the count of certain number of records for example, count(sales_id).
Region (North), Product Category(ABC) -> 15 (Sales record count using count(sales_id))
I want the ability to provide another detail report which will be the drill down of 15 that shows 15 sales records in detail.
The detail report will be invoked using the Action Link which has the BI navigation from the Measure Column (that has 15) to pass the list of sales_id's as the prompted filter based on the analysis results from the summary report.
Any idea on what I need to do in the summary report to pass the list of sales id's instead of the count 15? I do not want to display the sales_id's in the summary report.
Thanks
SankarIn your example, each of the 15 sales IDs are in the same Product Category (ABC), yes? So put the action link on this column instead of the measure (so ABC in this example would be the link). In the detail report, you will need to include the Sales ID column in order to produce the 15 rows, but you can hide it so it doesn't show up on the report. (The reason you want to include the sales ID in the destination report is because the measure column would break out the rows only assuming there are no measures that are the same. If they are the same, they might roll up so having the sales ID in the report ensures that the rows remain distinct.)
Edited by: David_T on Mar 15, 2012 2:34 PM

Discoverer Olap Plus - Drill to Detail using URL's

We are using the "Manage Links" feature in Discoverer Plus to send dimension value names in a URL. As part of the "Manage Links" feature, the user is given the opportunity to choose which dimension values for the selected cells they want to include in the URL.
We are attempting to create URL's to drill from Discoverer Plus to more detailed Oracle Reports, which will use the dimension values in sql statements . One problem we noticed is for each dimension we can not select multiple values to send in the URL.
For example;
I have a URL I want to append selected dimension values from Discoverer Plus.
We have 2 dimensions each containing 5 dimension values. We use Discoverer Plus to filter down to 2 dimension values for each dimension to be included in our url.
Time: Nov2007, Dec2007
Division: USCCSLT, USCCLSY
Measure: Flux
URL:
https://corpdev.ffmb.com:11228/reports/rwservlet?RPT_TEST_XLS=<TIME:VALUE>, <DIV:VALUE>
When the link executed, the EXIT URL only contains the first dimension value for each dimension. I have included the exit URL below:
Result:
https://corpdev.ffmb.com:11228/reports/rwservlet?RPT_TEST_XLS=Nov2007,USCCSLT
It should contain Nov2007, Dec2007, USCCSLT, USCCLSY.
I've tried a variety to things in the Manage Links, but it always sends out just one dimension value.
According to the choices given in "Manage Links", it is not supposed to work this way.
I have a feeling I'm doing something wrong, because I don't see many posts here related to creating Discoverer Plus URL's.
If anyone encountered this and came up with a solution, I'd be interested to read your comments.
Thanks,
Michael

Hi There:
If you had figured it out, please let me know.
Regards
Rufus

Information about linked server details including remote login in use

After joining a new organization, one day an application support came to ask brief information about all the SQL Server linked servers and few more important configuration details.
They were looking to upgrade their application and database. In order to know all possible sources of their data feed, the guy needed this information.
Most of the information could have been taken by running
sp_linkedservers but because login information was also required I preferred to run following query to collect the required data.
SELECT
srv.name as LinkedServerName
,srv.product
,srv.provider
,srv.data_source
,srv.catalog
,sp.name
,lgn.uses_self_credential
,lgn.remote_name remote_login_in_use
FROM
sys.servers
AS srv JOIN
sys.linked_logins
AS lgn
ON
srv.server_id = lgn.server_id
AND srv.is_data_access_enabled
= 1
LEFT
JOIN sys.server_principals
AS sp ON lgn.local_principal_id
= sp.principal_id
WHAT IS actual data source Server Name
Although they got the information, but they could not recognize the actual server names as highlighted in the
srv_data_source column. All they said that, the linked servers were created by DBAs.
I tried to ping these names from my user desktop, but could not Ping request could not find host.
Tried to check the SQL Server Aliases but there were no alias defined for any of the server names.
Finally I looked into the host file and found the entries. The ping from my desktop did not work because the host file entries are local to the database server. Because SQL Server instance is sitting on the same server where the
names are entered into the host file, it was able to resolve the host names. Also Ping from the database server worked. The host file looked like as below (C:\Windows\System32\drivers\etc)
Hope this information helps you!!.
Warm Regards, Ajay

Hi Ajay,
Thanks for sharing your idea.
Maggie Luo
TechNet Community Support

"Drill-to-Detail" to remote RDBMS

Similar Messages

Maybe you are looking for